Hi
On Wed, Mar 15, 2023 at 3:13 PM Frieder Schrempf
wrote:
>
> Hi,
>
> I'm trying to bring up a new board based on the i.MX8MP and I have an
> issue I'm hoping someone can help solving.
>
> I'm seeing failures in the early SPL code, usually in the DDR
> initialization. Often they look like:
>
>
On 3/15/23 15:05, Simon Glass wrote:
> Hi Johan,
>
> On Tue, 14 Mar 2023 at 12:16, Johan Jonker wrote:
>>
>> In order to better compare the Linux rk3288.dtsi
>> version 6.3 -rc2 with the u-boot version partial
>> sync the pwm nodes.
>>
>> Signed-off-by: Johan Jonker
>> ---
>>
The rk3288 pwm nodes synced from Linux make use of PCLK_RKPWM
instead of PCLK_PWM. They have the same pclk_cpu parent,
so add PCLK_RKPWM to rk3288_clk_get_rate().
Signed-off-by: Johan Jonker
Reviewed-by: Simon Glass
Tested-by: Simon Glass # chromebook-jerry
---
The rk3288 edp node has a phy node in Linux with a clock
property while current U-Boot driver expects this clock
on position index 1. Move U-Boot-specific DT clock properties
to rk3288-u-boot.dtsi and partially sync the edp node.
Signed-off-by: Johan Jonker
Reviewed-by: Simon Glass
Tested-by:
In order to better compare the Linux rk3288.dtsi
version 6.3 -rc2 with the U-Boot version partial
sync the vop/lvds/mipi/hdmi nodes.
Signed-off-by: Johan Jonker
Reviewed-by: Simon Glass
Tested-by: Simon Glass # chromebook-jerry
---
arch/arm/dts/rk3288.dtsi | 48
In order to better compare the Linux rk3288.dtsi
version 6.3 -rc2 with the U-Boot version partial
sync the pwm nodes.
Signed-off-by: Johan Jonker
---
arch/arm/dts/rk3288.dtsi | 18 +-
1 file changed, 5 insertions(+), 13 deletions(-)
diff --git a/arch/arm/dts/rk3288.dtsi
Hi Neha,
On Mon, 13 Mar 2023 at 21:41, Neha Malcom Francis wrote:
>
> Hi Simon
>
> On 11/03/23 07:17, Simon Glass wrote:
> > Hi Neha,
> >
> > On Fri, 24 Feb 2023 at 03:51, Neha Malcom Francis wrote:
> >>
> >> Currently, bintool supports external compilable tools as single
> >> executable files.
This reverts commit 9f62a472dfb26ec14408a27938ddd2a2579d.
The changes here aren't quite right, and on platforms such as Raspberry
Pi where we can have both serial and video output, the change above
causes output to change. This can be seen as the hush tests we have now
fail.
Signed-off-by:
In order to better compare the Linux rk3288.dtsi version
with the U-Boot version move the io-domains nodes.
Signed-off-by: Johan Jonker
Reviewed-by: John Keeping
Reviewed-by: Simon Glass
Tested-by: Simon Glass # chromebook-jerry
---
arch/arm/dts/rk3288-miqi.dtsi| 27
On Tue, Mar 14, 2023 at 04:07:57PM -0600, Simon Glass wrote:
> Hi Tom,
>
> On Mon, 13 Mar 2023 at 13:36, Tom Rini wrote:
> >
> > On Sun, Mar 12, 2023 at 09:10:19PM -0600, Simon Glass wrote:
> >
> > > Hi Tom,
> > >
> > > This is for the -next branch
> > >
> > >
> > >
On 15.03.23 15:42, Frieder Schrempf wrote:
> On 15.03.23 15:17, Michael Nazzareno Trimarchi wrote:
>> Hi
>>
>> On Wed, Mar 15, 2023 at 3:13 PM Frieder Schrempf
>> wrote:
>>>
>>> Hi,
>>>
>>> I'm trying to bring up a new board based on the i.MX8MP and I have an
>>> issue I'm hoping someone can help
On 15.03.23 15:17, Michael Nazzareno Trimarchi wrote:
> Hi
>
> On Wed, Mar 15, 2023 at 3:13 PM Frieder Schrempf
> wrote:
>>
>> Hi,
>>
>> I'm trying to bring up a new board based on the i.MX8MP and I have an
>> issue I'm hoping someone can help solving.
>>
>> I'm seeing failures in the early SPL
From: Jianqun Xu
Add support for Rockchip rk3588 variant of pinctrl.
The driver is adapted from the Linux driver.
Signed-off-by: Jianqun Xu
[eugen.hris...@collabora.com:
port to latest U-boot, bring more changes from Linux
use translated pull values table]
Signed-off-by: Eugen Hristev
---
On 15/03/2023 16.24, Frieder Schrempf wrote:
> On 15.03.23 15:42, Frieder Schrempf wrote:
>> On 15.03.23 15:17, Michael Nazzareno Trimarchi wrote:
>>> Hi
>>>
>>> On Wed, Mar 15, 2023 at 3:13 PM Frieder Schrempf
>>> wrote:
Hi,
I'm trying to bring up a new board based on the
On Wed, 15 Mar 2023 at 10:01, Tom Rini wrote:
>
> This reverts commit 9f62a472dfb26ec14408a27938ddd2a2579d.
>
> The changes here aren't quite right, and on platforms such as Raspberry
> Pi where we can have both serial and video output, the change above
> causes output to change. This can be
In the current rk3288.dtsi file the compatible string for
the DisplayPort(DP) node ends with "edp". The string in the
binding ends with "dp" which conflicts with "cdn-dp" as a
search term. Add "rk3288-dp" as compare string to select
vop_id.
Signed-off-by: Johan Jonker
Reviewed-by: Simon Glass
In order to better compare the Linux rk3288.dtsi
version 6.3 -rc2 with the U-Boot version partial
sync the grf and pmu nodes.
Signed-off-by: Johan Jonker
Reviewed-by: Simon Glass
Tested-by: Simon Glass # chromebook-jerry
---
arch/arm/dts/rk3288.dtsi | 269
Hi Ajay,
On Wed, 15 Mar 2023 at 13:24, Ajay Kaher wrote:
>
> > On Fri, Sep 09, 2022 at 09:16:18PM +0100, Pierre-Clément Tosi wrote:
> >
> >> When the embedded device tree is pointed to by the __dtb_dt_*begin
> >> symbols, it seems to be covered by the early relocation code and doesn't
> >>
On Tue, 14 Mar 2023 at 18:24, Tony Dinh wrote:
>
> To make sure the panic and the reset messages will go out, console flush()
> should be used.
> Sleep periods do not work in early u-boot phase when timer driver is not
> initialized yet.
>
> Reference:
On Sat, 11 Mar 2023 at 09:29, Marek Vasut
wrote:
>
> The 'fdt get addr' and 'env get size' is always assumed to be hex
> value, drop the prefix, and outright switch to env_set_hex(). Since
> this might break existing users who depend on the existing behavior
> with 0x prefix, this is a separate
On Mon, 13 Mar 2023 at 18:38, Jonas Karlman wrote:
>
> Imply use of BOOTSTD and OF_LIBFDT_OVERLAY on RK3568 and RK3588.
> Drop the use of scripts and rely on standard boot for all operation.
>
> Signed-off-by: Jonas Karlman
> ---
> arch/arm/mach-rockchip/Kconfig | 6 ++
>
Greetings,
I'm seeing a hang on imx8mm-venice and imx8mn-venice boards which have
a USB host controller in host mode when ehci_shutdown() is called
(which is called for 'usb stop' as well as when booting a kernel once
'usb start' has been issued).
This appears to be caused by the ehci_shutdown()
Hi Pali,
On Wed, Mar 15, 2023 at 2:58 PM Pali Rohár wrote:
>
> On Wednesday 15 March 2023 14:56:52 Tony Dinh wrote:
> > The mainline Pogo V4 DTS uses a stdout-path format that is not
> > recognizable by u-boot. Change it to a commonly used format.
>
> Cannot we teach u-boot to understand also
On Tue, Mar 14, 2023 at 03:41:57PM +, Andre Przywara wrote:
> Hi Tom,
>
> please pull these two patches containing just devicetree updates for
> Allwinner boards.
> I was still hoping for a review, since we cannot import the files
> from the Linux tree verbatim, but managed to write some
On Wed, Mar 15, 2023 at 02:03:50AM +0100, Angelo Dureghello wrote:
> The following changes since commit 88e08fc5f6e508eac46cd1dfb0379b11ae032c0a:
>
> Prepare v2023.04-rc4 (2023-03-13 20:52:48 -0400)
>
> are available in the Git repository at:
>
> git://git.denx.de/u-boot-coldfire.git
Hi Simon,
On Wed, Mar 15, 2023 at 12:43 PM Simon Glass wrote:
>
> On Tue, 14 Mar 2023 at 18:24, Tony Dinh wrote:
> >
> > To make sure the panic and the reset messages will go out, console flush()
> > should be used.
> > Sleep periods do not work in early u-boot phase when timer driver is not
On Fri, 2023-03-10 at 17:46 -0800, Simon Glass wrote:
> Hi Ivan,
>
> On Tue, 7 Mar 2023 at 14:13, Ivan Mikhaylov
> wrote:
> >
> > From: Roman Kopytin
> >
> > Signed-off-by: Roman Kopytin
> > Cc: Rasmus Villemoes
> > ---
> > test/py/tests/test_vboot.py | 8
> > 1 file changed, 8
On Wednesday 15 March 2023 14:56:52 Tony Dinh wrote:
> The mainline Pogo V4 DTS uses a stdout-path format that is not
> recognizable by u-boot. Change it to a commonly used format.
Cannot we teach u-boot to understand also currently used format?
> Note that this patch removes the previous
Hi,
Does anyone know how to build mkimage (or other tools) on a Windows
host, or at least with a Windows target?
Regards,
SImon
The mainline Pogo V4 DTS uses a stdout-path format that is not
recognizable by u-boot. Change it to a commonly used format.
Note that this patch removes the previous workaround for this board
as discussed here:
https://lists.denx.de/pipermail/u-boot/2023-February/508936.html
Signed-off-by: Tony
Add Kconfig to select the basic functions for StarFive VisionFive v2 Board.
Signed-off-by: Yanhong Wang
Tested-by: Conor Dooley
---
board/starfive/visionfive2/Kconfig | 53 ++
1 file changed, 53 insertions(+)
create mode 100644 board/starfive/visionfive2/Kconfig
Add a DM reset driver for StarFive JH7110 SoC.
Note that the register base address of reset controller is the
same with the clock controller. Therefore, there is no device
tree node alone for reset driver.It binds device node in
the clock driver
Signed-off-by: Yanhong Wang
Tested-by: Conor
Add StarFive JH7110 SoC to support RISC-V arch.
Signed-off-by: Yanhong Wang
Reviewed-by: Rick Chen
Tested-by: Conor Dooley
---
arch/riscv/cpu/jh7110/Makefile| 10
arch/riscv/cpu/jh7110/cpu.c | 23
arch/riscv/cpu/jh7110/dram.c | 38
This series of patches base on the latest branch/master, and add support
for the StarFive JH7110 RISC-V SoC and VisionFive V2 board. In order for
this to be achieved, the respective DT nodes have been added, and the
required defconfigs have been added to the boards' defconfig. What is more,
the
This adds support for the StarFive JH7110 SoC which also
feature this SiFive cache controller.
Signed-off-by: Yanhong Wang
Tested-by: Conor Dooley
---
drivers/cache/cache-sifive-ccache.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/cache/cache-sifive-ccache.c
Add initial device tree for the JH7110 RISC-V SoC.
Signed-off-by: Yanhong Wang
Tested-by: Conor Dooley
---
arch/riscv/dts/jh7110.dtsi | 582 +
1 file changed, 582 insertions(+)
create mode 100644 arch/riscv/dts/jh7110.dtsi
diff --git
This is the initial basic config for StarFive VisionFive v2 board. It
includes consol, Norflash, sdio, ddr etc.
Signed-off-by: Yanhong Wang
Tested-by: Conor Dooley
---
configs/starfive_visionfive2_defconfig | 79 ++
1 file changed, 79 insertions(+)
create mode 100644
Add a DM clock driver for StarFive JH7110 SoC.
Signed-off-by: Yanhong Wang
Tested-by: Conor Dooley
---
drivers/clk/Kconfig | 1 +
drivers/clk/Makefile | 1 +
drivers/clk/starfive/Kconfig | 17 +
drivers/clk/starfive/Makefile | 4 +
From: Kuan Lim Lee
Add pinctrl driver for StarFive JH7110 SoC.
Signed-off-by: Kuan Lim Lee
Signed-off-by: Emil Renner Berthing
Signed-off-by: Jianlong Huang
Signed-off-by: Yanhong Wang
Tested-by: Conor Dooley
---
drivers/pinctrl/Kconfig | 1 +
From: Jianlong Huang
Add pinctrl definitions for StarFive JH7110 SoC.
Signed-off-by: Kuan Lim Lee
Signed-off-by: Emil Renner Berthing
Signed-off-by: Jianlong Huang
Signed-off-by: Yanhong Wang
Tested-by: Conor Dooley
---
.../pinctrl/pinctrl-starfive-jh7110.h | 427
Add all clock outputs for the StarFive JH7110 clock generator.
Signed-off-by: Yanhong Wang
Acked-by: Sean Anderson
Tested-by: Conor Dooley
---
.../dt-bindings/clock/starfive,jh7110-crg.h | 257 ++
1 file changed, 257 insertions(+)
create mode 100644
Add resets for the StarFive JH7110 system(SYS),system-top-group(STG) and
always-on(AON) reset controller.
Signed-off-by: Yanhong Wang
Tested-by: Conor Dooley
---
.../dt-bindings/reset/starfive,jh7110-crg.h | 183 ++
1 file changed, 183 insertions(+)
create mode 100644
Add driver for StarFive JH7110 to support ddr initialization in SPL.
Signed-off-by: Yanhong Wang
Tested-by: Conor Dooley
---
drivers/ram/Kconfig |1 +
drivers/ram/Makefile|4 +-
drivers/ram/starfive/Kconfig|5 +
drivers/ram/starfive/Makefile
Add board support for StarFive VisionFive v2.
Signed-off-by: Yanhong Wang
Tested-by: Conor Dooley
---
board/starfive/visionfive2/MAINTAINERS| 7 +
board/starfive/visionfive2/Makefile | 7 +
board/starfive/visionfive2/spl.c | 87
Add initial u-boot device tree for the JH7110 RISC-V SoC.
Signed-off-by: Yanhong Wang
Tested-by: Conor Dooley
---
arch/riscv/dts/jh7110-u-boot.dtsi | 99 +++
1 file changed, 99 insertions(+)
create mode 100644 arch/riscv/dts/jh7110-u-boot.dtsi
diff --git
Add initial device tree for StarFive VisionFive v2 board.
Signed-off-by: Yanhong Wang
Tested-by: Conor Dooley
---
arch/riscv/dts/Makefile | 3 +-
...10-starfive-visionfive-2-v1.2a-u-boot.dtsi | 69
.../jh7110-starfive-visionfive-2-v1.2a.dts| 12 +
Add board support for StarFive VisionFive v2.
Signed-off-by: Yanhong Wang
Tested-by: Conor Dooley
---
arch/riscv/Kconfig | 5 +
1 file changed, 5 insertions(+)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index 48ca4ff4c4..f6ed05906a 100644
--- a/arch/riscv/Kconfig
+++
Add Kconfig to select the basic functions for StarFive JH7110 SoC.
Signed-off-by: Yanhong Wang
Tested-by: Conor Dooley
---
arch/riscv/cpu/jh7110/Kconfig | 28
1 file changed, 28 insertions(+)
create mode 100644 arch/riscv/cpu/jh7110/Kconfig
diff --git
Hi Simon,
On 15/03/23 19:38, Simon Glass wrote:
Hi Nikhil,
On Wed, 15 Mar 2023 at 00:07, Nikhil M Jain wrote:
Hi Simon,
On 15/03/23 03:38, Simon Glass wrote:
Hi Nikhil,
On Mon, 13 Mar 2023 at 04:15, Nikhil M Jain wrote:
To enable splash screen at SPL stage move video driver and splash
On 15/03/2023 16:24, Frieder Schrempf wrote:
On 15.03.23 15:42, Frieder Schrempf wrote:
On 15.03.23 15:17, Michael Nazzareno Trimarchi wrote:
Hi
On Wed, Mar 15, 2023 at 3:13 PM Frieder Schrempf
wrote:
Hi,
I'm trying to bring up a new board based on the i.MX8MP and I have an
issue I'm
Hello,
I followed the official documentation [1] to build U-Boot for my Rock
Pi 4, instead of evb-rk3399_defconfig I used the config file for my
board (rock-pi-4-rk3399_defconfig).
After I flashed the single boot image to an SD card and put it in I got
stuck with the error message:
> On Fri, Sep 09, 2022 at 09:16:18PM +0100, Pierre-Clément Tosi wrote:
>
>> When the embedded device tree is pointed to by the __dtb_dt_*begin
>> symbols, it seems to be covered by the early relocation code and doesn't
>> need to be manually patched.
>>
>> Cc: Simon Glass
>> Signed-off-by:
This series fixes the support for J721E board along with some
maintainance for it.
v5:
- change the memory map to list-table
v4:
- Fix docs
- applied reviewed-by
v3:
- drop fixes related to other boards ( make series j721e specific )
- memory map added in docs
- applied reviewed-by
v2:
- Merge
From: Andrew Davis
When building for secure devices using non-buildman based image generation
the signed tispl.bin file is called tispl.bin_HS. Also build the unsigned
tispl.bin file as expected.
Signed-off-by: Andrew Davis
Signed-off-by: Manorit Chawdhry
---
arch/arm/mach-k3/config.mk | 2
Hi Simon,
On 15/03/23 03:38, Simon Glass wrote:
Hi Nikhil,
On Mon, 13 Mar 2023 at 04:15, Nikhil M Jain wrote:
To enable splash screen at SPL stage move video driver and splash screen
framework at SPL, which will bring up image on display very quickly and
thus have early display support in
K3 devices have runtime type board detection. Make the default defconfig
include the secure configuration. Then remove the HS specific config.
Non-HS devices will continue to boot due to runtime device type detection.
If TI_SECURE_DEV_PKG is not set the build will emit warnings, for non-HS
In non-combined boot flow for K3, all the firewalls are locked by default
until sysfw comes up. Rom configures some of the firewall for its usage
along with the SRAM for R5 but the PSRAM region is still locked.
The K3 MCU Scratchpad for j721e was set to a PSRAM region triggering the
firewall
On 14:01-20230306, Tom Rini wrote:
> On Mon, Mar 06, 2023 at 11:12:53AM +0530, Manorit Chawdhry wrote:
> > In non-combined boot flow for K3, all the firewalls are locked by default
> > until sysfw comes up. Rom configures some of the firewall for its usage
> > along with the SRAM for R5 but the
From: Dave Gerlach
When booting with HS silicon, the system firmware image is 278270, which
is slightly larger than currently allocated amount.
This can cause unexpected behavior if this overlap interferes with other
things in memory, so increase this with a slightly margin added as well
to
On Mon, Mar 06, 2023 at 05:18:58PM -0600, jassisinghb...@gmail.com wrote:
> From: Jassi Brar
>
> fwu_get_mdata() no more requires 'dev' argument and
> fwu_check_mdata_validity() has been rendered useless and dropped.
> Fix the test cases to work with aforementioned changes.
>
> Signed-off-by:
On Tue, Mar 14, 2023 at 07:13:30PM +0100, Johan Jonker wrote:
> In order to better compare the Linux rk3288.dtsi version
> with the u-boot version move the io-domains nodes.
>
> Signed-off-by: Johan Jonker
A few minor nits below, but with or without those fixed this is a step
in the right
On 3/11/23 18:38, Ovidiu Panait wrote:
Add elf16_to_cpu() and elf32_to_cpu() functions that allow to read data in
both big-endian and little-endian formats.
Reviewed-by: Michal Simek
I didn't give you this line in v1.
But patch looks fine now.
Applied the whole series.
Thanks,
Michal
Hi Tom,
please pull these patches to your next branch. CI loop doesn't report any issue.
Thanks,
Michal
The following changes since commit 70ed05ce6c051e55e126e67e72ab20409134c953:
Merge tag 'next-20230307' of
https://source.denx.de/u-boot/custodians/u-boot-video into next (2023-03-07
On Thu, Feb 09, 2023 at 06:07:02PM +0200, Ioana Ciornei wrote:
> This patch set fixes the MAC address fixup procedure which was impacted
> by several changes in the phy_interface_t used to describe some
> interfaces. The transitions from "xgmii" to "xfi" and then finally
> to "10gbase-r" were
Since the device trees are more or less synchronized with Linux, the
only necessary changes are to enable CONFIG_DM_SERIAL and the DM_SERIAL
driver for ns16550 (ns16550.c rather than serial_ns16550.c).
ls1028aqds_tfa_lpuart_defconfig already uses DM_SERIAL for the LPUART
driver, so I didn't touch
Sync the serial nodes of the LS1088A based boards with their
representation in Linux. We also imported the clockgen and sysclk nodes
which are dependencies.
Signed-off-by: Ioana Ciornei
---
arch/arm/dts/fsl-ls1088a-qds.dtsi | 8 +++
arch/arm/dts/fsl-ls1088a-rdb.dts | 8 +++
The u-boot dts for these boards do not have an soc node, unlike its
Linux counterpart. This patch just adds the soc node as seen in Linux,
the next patches will move some nodes under it.
Signed-off-by: Ioana Ciornei
---
arch/arm/dts/fsl-ls1088a.dtsi | 9 +
1 file changed, 9
Move the serial nodes under the soc node. No changes are made to the
nodes, just their location is changed.
Signed-off-by: Ioana Ciornei
---
arch/arm/dts/fsl-ls1088a.dtsi | 31 +++
1 file changed, 15 insertions(+), 16 deletions(-)
diff --git
This patch set converts the LS1088A and LX216X based boards to DM_SERIAL.
Since we don't want to introduce even more differences between the
U-Boot's and Linux's device trees, the DT patches make the necessary
updates so that the serial nodes are synced with their counterpart.
We also update the
Move the serial nodes under the soc node. No changes are made to the
nodes, just their location is changed.
Signed-off-by: Ioana Ciornei
---
arch/arm/dts/fsl-lx2160a.dtsi | 56 +--
1 file changed, 28 insertions(+), 28 deletions(-)
diff --git
Now that the DT nodes for the serial devices are in place for these
boards, enable DM_SERIAL in the associated configs.
Signed-off-by: Ioana Ciornei
---
configs/ls1088aqds_tfa_defconfig | 4 +++-
configs/ls1088ardb_tfa_SECURE_BOOT_defconfig | 4 +++-
configs/ls1088ardb_tfa_defconfig
The u-boot dts for these boards do not have an soc node, unlike its
Linux counterpart. This patch just adds the soc node as seen in Linux,
the next patches will move some nodes under it.
Signed-off-by: Ioana Ciornei
---
arch/arm/dts/fsl-lx2160a.dtsi | 8
1 file changed, 8 insertions(+)
Tag the serial nodes with bootph-all in order to have these nodes and
the drivers available before relocation.
Signed-off-by: Ioana Ciornei
---
arch/arm/dts/fsl-lx2160a.dtsi | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/fsl-lx2160a.dtsi b/arch/arm/dts/fsl-lx2160a.dtsi
Tag the serial nodes with bootph-all in order to have these nodes and
the drivers available before relocation.
Signed-off-by: Ioana Ciornei
---
arch/arm/dts/fsl-ls1088a.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/dts/fsl-ls1088a.dtsi b/arch/arm/dts/fsl-ls1088a.dtsi
index
There is no need for the board file to instantiate a PL01X platform
device anymore. This is all taken care of by the DM code which now will
probe the device based on the DT node.
Signed-off-by: Ioana Ciornei
---
board/freescale/lx2160a/lx2160a.c | 34 ---
1 file
Sync the serial nodes of the LX2160A based boards with their
representation in Linux. We also imported the clockgen and sysclk nodes
which are dependencies.
Signed-off-by: Ioana Ciornei
---
arch/arm/dts/fsl-lx2160a-qds.dtsi | 11 ++-
arch/arm/dts/fsl-lx2160a-rdb.dts | 11 ++-
On Wed, Mar 15, 2023 at 01:01:16PM +0200, Vladimir Oltean wrote:
> Since the device trees are more or less synchronized with Linux, the
> only necessary changes are to enable CONFIG_DM_SERIAL and the DM_SERIAL
> driver for ns16550 (ns16550.c rather than serial_ns16550.c).
>
>
Hi Jaehoon
> commit 4a3ea75de4c5b3053eac326bf1c753ed65df8cb9
> Author: yuezhang...@sony.com
> Date: Wed Mar 17 06:44:37 2021 +
>
> Revert "mmc: sdhci: set to INT_DATA_END when there are data"
>
> This reverts commit 17ea3c862865c0d704646f67dbf8412f9ff54f59.
>
> Revert the above
On 13/03/23 6:12 pm, Sinthu Raja wrote:
> From: Sinthu Raja
>
> Hi All,
> This series of patch add support to enable lane2 and lane3 swap by
> configuring the LN23 bit. Also, it's possible that the Type-C plug orientation
> on the DIR line will be implemented through hardware design. In that
This commit adds driver for iMX93 ADC.
The driver is implemented using driver model and provides
ADC uclass's methods for ADC single channel operations:
- adc_start_channel()
- adc_channel_data()
- adc_stop()
ADC features:
- channels: 4
- resolution: 12-bit
Signed-off-by:
Add ADC support for NXP iMX93
Changes for v2:
- add "static" to functions
- enable ADC in iMX93 EVK
Changes for v3:
- split in 3 commits
- keep dts file in sync with Linux devicetree
- add comments to commits
Changes for v4:
- add imx93_adc_power_down() in imx93_adc_stop()
Luca Ellero (3):
This node uses imx93_adc driver under drivers/adc.
The node is added keeping dts file in sync with iMX9 evk Linux
devicetree.
Signed-off-by: Luca Ellero
---
arch/arm/dts/imx93-11x11-evk.dts | 4
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/imx93-11x11-evk.dts
iMX93 ADC features:
- 4 channels
- 12 bit resolution
Signed-off-by: Luca Ellero
---
configs/imx93_11x11_evk_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/configs/imx93_11x11_evk_defconfig
b/configs/imx93_11x11_evk_defconfig
index 477fb25807..fa929dd4ec 100644
---
Hi Abdellatif,
On Tue, 14 Mar 2023 at 11:59, Abdellatif El Khlifi
wrote:
>
> Hi Simon,
>
> > Hi Abdellatif,
> >
> > On Fri, 10 Mar 2023 at 06:10, Abdellatif El Khlifi
> > wrote:
> > >
> > > Provide a Sandbox driver to emulate the FF-A ABIs
> > >
> > > The emulated ABIs are those supported by
Hi Tom.
On Thu, 2 Mar 2023 at 13:37, Tom Rini wrote:
>
> On Wed, Feb 22, 2023 at 09:34:02AM -0700, Simon Glass wrote:
>
> > At present these are not included in SPL. They do add to code size but
> > are a bit faster, so adjust the setting to add them.
> >
> > Signed-off-by: Simon Glass
> > ---
On Tue, 14 Mar 2023 at 12:16, Johan Jonker wrote:
>
> The rk3288 edp node has a phy node in Linux with a clock
> property while current U-boot driver expects this clock
U-Boot
> on position index 1. Move U-boot specific DT clock properties
U-Boot-specific
> to rk3288-u-boot.dtsi and partially
On Tue, 14 Mar 2023 at 12:16, Johan Jonker wrote:
>
> In the current rk3288.dtsi file the compatible string for
> the DisplayPort(DP) node ends with "edp". The string in the
> binding ends with "dp" which conflicts with "cdn-dp" as a
> search term. Add "rk3288-dp" as compare string to select
>
On Tue, 14 Mar 2023 at 12:16, Johan Jonker wrote:
>
> The rk3288 pwm node synced from Linux make use of PCLK_RKPWM
> instead of PCLK_PWM. They have the same pclk_cpu parent,
> so add PCLK_RKPWM to rk3288_clk_get_rate().
>
> Signed-off-by: Johan Jonker
> ---
> drivers/clk/rockchip/clk_rk3288.c |
On Tue, 14 Mar 2023 at 12:13, Johan Jonker wrote:
>
> In order to better compare the Linux rk3288.dtsi version
> with the u-boot version move the io-domains nodes.
>
> Signed-off-by: Johan Jonker
> ---
> arch/arm/dts/rk3288-miqi.dtsi| 27 +++--
>
On Tue, 14 Mar 2023 at 12:15, Johan Jonker wrote:
>
> In order to better compare the Linux rk3288.dtsi
> version 6.3 -rc2 with the u-boot version partial
> sync the grf and pmu nodes.
>
> Signed-off-by: Johan Jonker
> ---
> arch/arm/dts/rk3288.dtsi | 269 +--
On Tue, 14 Mar 2023 at 12:16, Johan Jonker wrote:
>
> In order to better compare the Linux rk3288.dtsi
> version 6.3 -rc2 with the u-boot version partial
> sync the vop/lvds/mipi/hdmi nodes.
>
> Signed-off-by: Johan Jonker
> ---
> arch/arm/dts/rk3288.dtsi | 48
Hi Nikhil,
On Wed, 15 Mar 2023 at 00:07, Nikhil M Jain wrote:
>
> Hi Simon,
>
> On 15/03/23 03:38, Simon Glass wrote:
> > Hi Nikhil,
> >
> > On Mon, 13 Mar 2023 at 04:15, Nikhil M Jain wrote:
> >>
> >> To enable splash screen at SPL stage move video driver and splash screen
> >> framework at
Hi,
I'm trying to bring up a new board based on the i.MX8MP and I have an
issue I'm hoping someone can help solving.
I'm seeing failures in the early SPL code, usually in the DDR
initialization. Often they look like:
U-Boot SPL 2023.04-rc3 (Mar 07 2023 - 14:32:34 +)
Training FAILED
Hi Johan,
On Tue, 14 Mar 2023 at 12:16, Johan Jonker wrote:
>
> In order to better compare the Linux rk3288.dtsi
> version 6.3 -rc2 with the u-boot version partial
> sync the pwm nodes.
>
> Signed-off-by: Johan Jonker
> ---
> arch/arm/dts/rk3288.dtsi | 18 +-
> 1 file changed,
94 matches
Mail list logo
