On 07/12/2017 04:13 AM, shiwen wrote:
Hi all,
This is Shiwen, good morning! :)
I wan to do fast boot for arm , but I am not familiar with U-boot, as
title says, I'm curious that U-boot for smdk2410 allow snapshot
restoration? If allowed, can you tell me witch function do this work?
Any advice
On 07/12/2017 01:46 PM, 张释文 wrote:
On 07/12/2017 04:06 PM, Łukasz Majewski wrote:
On 07/12/2017 04:13 AM, shiwen wrote:
Hi all,
This is Shiwen, good morning! :)
I wan to do fast boot for arm , but I am not familiar with U-boot, as
title says, I'm curious that U-boot for smdk2410
On 07/12/2017 12:42 PM, yyurtcan wrote:
Hi,
I have p4080ds and lauterbach(T32) hardware debugger. As known, u-boot has
written both assembly and C language. I can debug all u-boot code in
assembly language(C code also converted to assembly). However, it is hard to
follow. How can I debug u-boot C
Hi Marek,
On 07/17/2017 10:39 AM, Łukasz Majewski wrote:
On 07/14/2017 06:27 PM, Philipp Tomsich wrote:
Up to now, there's been some ugliness associated with the
dependency from CMD_USB_MASS_STORAGE to USB_FUNCTION_MASS_STORAGE:
if someone only defined CMD_USB_MASS_STORAGE, they
On 07/14/2017 06:27 PM, Philipp Tomsich wrote:
Up to now, there's been some ugliness associated with the
dependency from CMD_USB_MASS_STORAGE to USB_FUNCTION_MASS_STORAGE:
if someone only defined CMD_USB_MASS_STORAGE, they'd meet a linker
error due to missing symbols that came from USB_FUNCTION_M
Hi Patrick,
I discover some limitation on DFU stack when I play on my ARM board
with DFU for my external SDCARD : 16GB
It is mainly caused by the 'long' type (32 bits on ARMv7)
used for size in dfu.c
I solve the issue with the 2 first patches of this serie
- manage size and result correctly i
Dear Marek,
The following changes since commit 807598a60c5bf7fdf0eb1d78625eeeacfac3c6bc:
usb: add static to local symbols (2017-07-14 20:45:20 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-dfu.git
for you to fetch changes up to 2361a4f3be36c673fbbbd1c76bc96553e5e
Hi Marek,
On 07/20/2017 12:03 PM, Łukasz Majewski wrote:
Dear Marek,
Hi,
The following changes since commit
807598a60c5bf7fdf0eb1d78625eeeacfac3c6bc:
usb: add static to local symbols (2017-07-14 20:45:20 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-dfu.git
Hi Marek,
When I was "cleaning up" my patchwork todo list I've found following
problem (s):
A lot of boards are broken with message:
LD u-boot
drivers/usb/host/built-in.o: In function `xhci_dwc3_remove':
/home/lukma/work/embedded/u-boot-denx/drivers/usb/host/xhci-dwc3.c:161:
undefined
On 07/22/2017 08:36 PM, Marek Vasut wrote:
On 07/22/2017 08:18 PM, Łukasz Majewski wrote:
Hi Marek,
When I was "cleaning up" my patchwork todo list I've found following
problem (s):
A lot of boards are broken with message:
LD u-boot
drivers/usb/host/built-in
On 07/24/2017 10:59 AM, Heiko Stübner wrote:
Am Montag, 24. Juli 2017, 16:38:52 CEST schrieb Andy Yan:
Hi Philipp:
On 2017年07月21日 18:55, Dr. Philipp Tomsich wrote:
On 21 Jul 2017, at 04:33, Andy Yan wrote:
Hi:
On 2017年07月19日 04:35, Philipp Tomsich wrote:
Here's a series that has a lot goin
On 07/24/2017 09:02 AM, Bin Meng wrote:
On Mon, Jul 24, 2017 at 2:48 PM, Patrice CHOTARD wrote:
Hi Marek
On 07/22/2017 08:36 PM, Marek Vasut wrote:
On 07/22/2017 08:18 PM, Łukasz Majewski wrote:
Hi Marek,
When I was "cleaning up" my patchwork todo list I've found following
On 07/24/2017 02:53 PM, Marek Vasut wrote:
On 07/24/2017 02:47 PM, Tom Rini wrote:
On Mon, Jul 24, 2017 at 02:09:56PM +0200, Marek Vasut wrote:
On 07/23/2017 05:47 PM, Tom Rini wrote:
On Sun, Jul 23, 2017 at 09:05:31AM -0600, Simon Glass wrote:
This does not work on 64-bit machines. Update i
Hi Simon
This moves four entire boards to use a live device tree as an example of
the impact.
I've grepp'ed the ./doc directory and couldn't find any info regarding
"livetree" feature.
From patches, I guess that livetree is about preparing DM tree just
after relocation.
Am I right?
If I
Hi Philipp,
In order to easily model a that CMD_USB_MASS_STORAGE implies having
USB_FUNCTION_MASS_STORAGE enabled, we first need to migrate
USB_FUNCTION_MASS_STORAGE to Kconfig.
Thanks for the conversion!
Signed-off-by: Philipp Tomsich
Acked-by: Łukasz Majewski
---
Changes in v3
On 07/26/2017 07:05 PM, Adam Ford wrote:
This converts the following to Kconfig:
CONFIG_USB_ETHER
CONFIG_USB_ETHER_RNDIS
Signed-off-by: Adam Ford
Acked-by: Łukasz Majewski
--
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB
EPT_SIZ_XFER_SIZE(length),
Reviewed-by: Łukasz Majewski
--
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-6698
-Boot 2017.07. There is still quite a bit
+of work to do to flesh this out:
+
+- tests for all access functions
+- support for livetree modification
+- addition of more access functions as needed
+- support for livetree in SPL and before relocation (if desired)
+
+
+--
+Simon Glass
+5-Aug-17
Thanks S
ols => include}/imximage.h (100%)
diff --git a/tools/imximage.h b/include/imximage.h
similarity index 100%
rename from tools/imximage.h
rename to include/imximage.h
Reviewed-by: Łukasz Majewski
--
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wo
Hi Stefan,
From: Stefan Agner
This series adds NXP's Serial Download Protocol (SDP) support via
USB for SPL/U-Boot. It allows to download U-Boot via USB from a
(recovered) SPL using the same tools used to download SPL itself
(specifically imx_usb, but also sb_loader seems to work).
If I migh
Hi Stefan,
From: Stefan Agner
Add SDP (Serial Downloader Protocol) implementation for U-Boot. The
protocol is used in NXP SoC's boot ROM and allows to download program
images. Beside that, it can also be used to read/write registers and
download complete Device Configuration Data (DCD) sets. T
: Stefan Agner
Reviewed-by: Łukasz Majewski
---
drivers/usb/gadget/f_sdp.c | 20 ++--
1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/gadget/f_sdp.c b/drivers/usb/gadget/f_sdp.c
index eb89695aaf..9a752843f0 100644
--- a/drivers/usb/gadget/f_sdp.c
ial Downloader Protocol",
+ "\n"
+ " - serial downloader protocol via \n"
+);
Reviewed-by: Łukasz Majewski
--
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.
evice Configuration Data (DCD) sets. This basic
implementation supports downloading images with the imx header format
reading and writing registers.
Signed-off-by: Stefan Agner
Reviewed-by: Łukasz Majewski
---
Changes in v2:
- Changed function signature of sdp_init/sdp_handle to allow speci
On 08/16/2017 08:00 PM, Stefan Agner wrote:
From: Stefan Agner
Add USB serial download protocol support to SPL. If the SoC started
in recovery mode the SPL will immediately switch to SDP and wait for
further downloads/commands from the host side.
Reviewed-by: Łukasz Majewski
Signed-off
Hi Stefan,
From: Stefan Agner
Document the U-Boot Serial Download Protocol implementation and
some typical use cases.
Thanks for providing the description :-)
Reviewed-by: Łukasz Majewski
Signed-off-by: Stefan Agner
---
This ended up to be almost more a imx_usb documentation. But
On 08/16/2017 08:00 PM, Stefan Agner wrote:
From: Stefan Agner
Use a completely independent USB Product ID for SPL. This allows
to differentiate a SDP running in SPL and SDP running in a U-Boot
which could not read the config block successfully.
Reviewed-by: Łukasz Majewski
Signed-off-by
uct mtd_device *mtd_dev;
u8 part_num;
@@ -220,6 +222,7 @@ int dfu_fill_entity_nand(struct dfu_entity *dfu, char
*devstr, char *s)
mtdparts_init();
ret = find_dev_and_part(mtd_id, &mtd_dev, &part_num, &pi);
+
I think that this
On 08/17/2017 03:54 PM, Marek Vasut wrote:
On 08/17/2017 03:49 PM, Stefano Babic wrote:
On 16/08/2017 20:00, Stefan Agner wrote:
From: Stefan Agner
Add SDP (Serial Downloader Protocol) implementation for U-Boot. The
protocol is used in NXP SoC's boot ROM and allows to download program
images.
Hi Philipp,
On 26 July 2017 at 05:22, Philipp Tomsich
wrote:
With both an imply from CMD_USB to USB_FUNCTION_MASS_STORAGE and with
USB_FUNCTION_MASS_STORAGE moved to Kconfig, we can now run moveconfig.
Signed-off-by: Philipp Tomsich
---
Changes in v3: None
Changes in v2: None
configs/CHI
);
- if (res == 0) {
+ if (res != ramdisk_sectors) {
error("cannot read ramdisk from boot partition");
fastboot_fail("cannot read ramdisk from boot partition");
return -1;
Reviewed-by: Łukasz Majewski
I've applied th
Dear Marek,
The following changes since commit 5b70b1688cdf677563096063e4a48e4bed250a10:
usb: ehci: Convert CONFIG_USB_EHCI_PCI to Kconfig (2017-08-09
10:50:08 +0200)
are available in the git repository at:
git://git.denx.de/u-boot-dfu.git/master
for you to fetch changes up to b14b19e1a
Hi Kever,
Philipp,
I have no idea about the status of rockusb, it has been a long time
on the list.
Maybe Eddie or Lukasz have an answer?
I've asked Eddie to fix issues with breaking other boards when enabling
USB gadget infrastructure on RK.
No reply since then.
I have to use tho
: Select dtb name for X15 revC
arch/arm/dts/Makefile | 1 +
board/ti/am57xx/board.c | 3 +++
configs/am57xx_evm_defconfig| 2 +-
configs/am57xx_hs_evm_defconfig | 2 +-
include/environment/ti/boot.h | 2 ++
5 files changed, 8 insertions(+), 2 deletions(-)
Reviewed-by: Łukasz
On 08/24/2017 03:02 PM, Stefano Babic wrote:
Hi Breno,
On 24/08/2017 15:00, Breno Lima wrote:
Since the gpr_init() function is common for boards using MX6S, MX6DL, MX6D,
MX6Q and MX6QP processors move it to the soc.c file.
Fully agree !
I took a loog a couple of days ago and I saw how much
Hi Philipp, Andy, Tom
On 25 Aug 2017, at 03:51, Andy Yan wrote:
Hi Lukasz:
2017-08-22 18:05 GMT+08:00 Łukasz Majewski mailto:lu...@denx.de>>:
Hi Kever,
Philipp,
I have no idea about the status of rockusb, it has been a long time
on the list.
Maybe Eddie or Lukasz have an
Dear All,
Hi Philipp, Andy, Tom
On 25 Aug 2017, at 03:51, Andy Yan wrote:
Hi Lukasz:
2017-08-22 18:05 GMT+08:00 Łukasz Majewski mailto:lu...@denx.de>>:
Hi Kever,
Philipp,
I have no idea about the status of rockusb, it has been a long time
on the list.
Maybe Eddie or Lukasz h
On 08/26/2017 02:46 PM, Tom Rini wrote:
On Fri, Aug 25, 2017 at 01:06:55PM +0200, Łukasz Majewski wrote:
Hi Philipp, Andy, Tom
On 25 Aug 2017, at 03:51, Andy Yan wrote:
Hi Lukasz:
2017-08-22 18:05 GMT+08:00 Łukasz Majewski mailto:lu...@denx.de>>:
Hi Kever,
Philipp,
I have n
Hi Michael,
Hi Lukasz,
Am Sonntag, 27. August 2017, 13:46:22 CEST schrieb Lukasz Majewski:
According to fsync specification [1] some special files (e.g., a pipe, FIFO,
or socket) don't support synchronization and return either EROFS or EINVAL.
On the linux side the sys_fsync -> do_fsync() che
On 08/28/2017 01:02 AM, Chaiken, Alison wrote:
On 2017-05-31 01:12, Lukasz Majewski wrote:
[ . . . ]
And another request -> Could you consider adding tests for those new
gpt commands to the 'sandbox' (sandbox_defconfig) ?
Then you can 'mount' some gpt test image ('host' command) and use it
wi
Hi Chris,
I ran into a few problems running moveconfig.py mainly due to boards
that include a common .h file. I'm not confident I've captured all the
defconfigs that need CONFIG_USB_HOST_ETHER or one of the specific
drivers. Is there a more fool-proof way of catching these cases?
Needless to say
Hi Anatolij,
bss section is cleared in crt0.S. board_init_r() is also
entered from crt0 code.
Reviewed-by: Lukasz Majewski
Signed-off-by: Anatolij Gustschin
Cc: Christian Gmeiner
Cc: Nikita Kiryanov
Cc: Jagan Teki
Cc: Tim Harvey
Cc: Marek Vasut
Cc: Lukasz Majewski
Cc: Fabio Estevam
Dear Marek,
Those patches are preferably for -next merge widow.
The following changes since commit ae61b5353b48fa49c66376f273cc53cd3c06b656:
usb: dwc3: fix Kconfig dependency to accept host driver in
drivers/usb/dwc3 (2017-08-25 11:23:27 +0200)
are available in the git repository at:
On 08/28/2017 10:32 PM, Marek Vasut wrote:
On 08/28/2017 09:28 PM, Łukasz Majewski wrote:
Dear Marek,
Those patches are preferably for -next merge widow.
The following changes since commit
ae61b5353b48fa49c66376f273cc53cd3c06b656:
usb: dwc3: fix Kconfig dependency to accept host driver
On 08/27/2017 03:40 PM, Ryan wrote:
Hello,
I have 2 chips which are 512mb each connected to the AM33xx processor.
I want to check if the base address is configured for each chip in
u-boot or kernel.
Could you be more specific here?
In u-boot (SPL + u-boot.img) the DDRs are configured.
When
On 08/31/2017 02:00 PM, Simon Glass wrote:
On 31 August 2017 at 19:59, Simon Glass wrote:
Add some documentation for the live device tree support in U-Boot. This
was missing from the initial series.
Signed-off-by: Simon Glass
Suggested-by: Lukasz Majewski
Reviewed-by: Łukasz Majewski
(I
On 08/31/2017 08:45 PM, Sam Protsenko wrote:
On 31 August 2017 at 21:20, Sam Protsenko wrote:
Since 842778a09104 commit, "fastboot devices" stopped to show correct
device serial number for TI boards, showing this line instead:
fastboot
This is because serial# env varia
On 09/01/2017 10:19 AM, Marek Vasut wrote:
On 08/31/2017 08:20 PM, Sam Protsenko wrote:
Since 842778a09104 commit, "fastboot devices" stopped to show correct
device serial number for TI boards, showing this line instead:
fastboot
This is because serial# env variable cou
On 09/01/2017 11:51 AM, Marek Vasut wrote:
On 09/01/2017 10:36 AM, Łukasz Majewski wrote:
On 09/01/2017 10:19 AM, Marek Vasut wrote:
On 08/31/2017 08:20 PM, Sam Protsenko wrote:
Since 842778a09104 commit, "fastboot devices" stopped to show correct
device serial number for TI board
Hi Heiko,
Would you find some time and run this patch through your test setup?
Thanks in advance.
Best regards,
Łukasz
Since commit 842778a09104 ("usb: gadget: g_dnl: only set iSerialNumber
if we have a serial#") "fastboot devices" stopped to show correct device
serial number for TI boards,
On 09/02/2017 06:37 PM, Rob Clark wrote:
Want to re-use this in fat dirent iterator in next patch.
Signed-off-by: Rob Clark
Reviewed-by: Łukasz Majewski
---
fs/fat/fat.c | 73 +++
include/fat.h | 1 +
2 files changed, 44
On 09/02/2017 06:37 PM, Rob Clark wrote:
Untangle directory traversal into a simple iterator, to replace the
existing multi-purpose do_fat_read_at() + get_dentfromdir().
Signed-off-by: Rob Clark
Reviewed-by: Łukasz Majewski
---
fs/fat/fat.c | 326
On 09/02/2017 06:37 PM, Rob Clark wrote:
And drop a whole lot of ugly code!
+1
Reviewed-by: Łukasz Majewski
Signed-off-by: Rob Clark
---
fs/fat/fat.c | 723 ++
include/fat.h | 6 -
2 files changed, 75 insertions(+), 654
is held in the FS_DIR "directory
stream"), to avoid re-traversing of the directory structure at each
step. The directory stream must be released with closedir() when it
is no longer needed.
Reviewed-by: Łukasz Majewski
Signed-off-by: Rob Clark
---
disk/part
On 09/02/2017 06:38 PM, Rob Clark wrote:
Implement the readdir interface using the directory iterators.
Reviewed-by: Łukasz Majewski
Signed-off-by: Rob Clark
---
fs/fat/fat.c | 56
1 file changed, 56 insertions(+)
diff --git a
On 09/02/2017 06:38 PM, Rob Clark wrote:
Add a generic implementation of 'ls' using opendir/readdir/closedir, and
replace fat's custom implementation. Other filesystems should move to
the generic implementation after they add opendir/readdir/closedir
support.
Reviewed-by:
On 09/02/2017 06:38 PM, Rob Clark wrote:
Noticed when comparing our output to linux. There are some lcase bits
which control whether filename and/or extension should be downcase'd.
Reviewed-by: Łukasz Majewski
Signed-off-by: Rob Clark
---
fs/fat/fat.c | 17 -
On 09/03/2017 04:56 PM, Fabio Estevam wrote:
From: Fabio Estevam
Instead of having every board file to add its own g_dnl_bind_fixup()
implementation, move it to the common imx6 SPL code.
Reviewed-by: Łukasz Majewski
Signed-off-by: Fabio Estevam
---
Stefan,
I don't have acce
Hi Marek,
This is needed for BTRFS.
Signed-off-by: Marek Behun
create mode 100644 lib/crc32c.c
Excuse me my ignorance, but in u-boot we already have:
./lib/crc32.c
is the crc32c algorithm a different one from venerable crc32?
diff --git a/include/u-boot/crc.h b/include/u-boot/crc.h
i
On 09/03/2017 05:47 PM, Rob Clark wrote:
On Sun, Sep 3, 2017 at 10:52 AM, Łukasz Majewski wrote:
On 09/02/2017 06:37 PM, Rob Clark wrote:
Want to re-use this in fat dirent iterator in next patch.
Signed-off-by: Rob Clark
Reviewed-by: Łukasz Majewski
thanks
btw, is there some way to
Hi Sam,
On 4 September 2017 at 08:36, Heiko Schocher wrote:
Hello Lukasz,
Am 02.09.2017 um 13:08 schrieb Łukasz Majewski:
Hi Heiko,
Would you find some time and run this patch through your test setup?
Thanks in advance.
Of course, as it is automated ;-)
Okay, I had to add an oneliner
onfig@1
|- description = "configuration description"
|- kernel = "kernel sub-node unit name"
|- ramdisk = "ramdisk sub-node unit name"
- |- fdt = "fdt sub-node unit-name"
+ |- fdt = "fdt sub-node unit-name" [, "fdt overlay sub-node
to be invalidated, so keep copies to avoid reloading.
+
+Pantelis Antoniou
+pantelis.anton...@konsulko.com
+11/7/2017
Reviewed-by: Łukasz Majewski
--
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5
ses on specifically using overlays as part of a FIT image.
+General information regarding overlays including its syntax and building it
+can be found in doc/README.fdt-overlays
+
Configuration without overlays
--
Reviwed-by: Łukasz Majewski
--
Best regard
On 09/08/2017 07:34 PM, Maxime Ripard wrote:
The usb_ether gadget duplicates the USB settings for the manufacturer,
product ID and vendor ID.
Make sure we use the common option so that we can expect a single VID/PID
couple for a single device.
Signed-off-by: Maxime Ripard
Reviewed-by: Lukasz
Hi Maxime,
The g_dnl USB settings for the vendor ID, product ID and manufacturer are
actually common settings that can and should be shared by all the gadgets.
Make them common by renaming them, and convert all the users.
Reviewed-by: Lukasz Majewski
Signed-off-by: Maxime Ripard
---
bo
On 09/11/2017 07:31 PM, Tom Rini wrote:
On Sun, Sep 10, 2017 at 08:25:02PM +0200, Lukasz Majewski wrote:
This patch gives an opportunity to override the defined CONFIG_BOOTCOMMAND
(at files) with set of commands defined in
board _defconfig file.
Rationale: This change allows having two differ
Hi Philipp,
This patch series is waiting for opening new merge window. It is already
applied to usb-next tree.
this patch implement rockusb protocol on the device side. this is based on USB
download gadget infrastructure. the rockusb function implements the rd, wl, rid
commands. it can work w
Hi Dr. Philipp,
Hi Lukasz,
On 12 Sep 2017, at 10:14, Łukasz Majewski wrote:
Hi Philipp,
This patch series is waiting for opening new merge window. It is already
applied to usb-next tree.
Didn’t the new merge window just open yesterday?
I'm sure Marek will send PR shortly.
Re
:00:01"
+ help
+ Ethernet MAC address of the device-side (ie. local board's) MAC
+ address of the usb_ether interface
endif # USB_GADGET
Acked-by: Łukasz Majewski
--
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: W
"Product ID of USB device"
+endif # USB_GADGET_DOWNLOAD
+
config USBNET_DEVADDR
string "USB Gadget Ethernet device mac address"
default "de:ad:be:ef:00:01"
-endif # USB_GADGET_DOWNLOAD
-
endif # USB_GADGET
Acked-by: Łukasz Majewski
--
#define CONFIG_USBNET_DEV_ADDR"de:ad:be:af:00:01"
#endif
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 9ce0c3f039ff..784e83c7c8a1 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -4983,7 +4983,6 @@ C
On 09/12/2017 09:01 PM, Maxime Ripard wrote:
The USB Ethernet gadget option has not yet been moved to Kconfig, let's
deal with that.
Reviewed-by: Łukasz Majewski
Signed-off-by: Maxime Ripard
---
configs/am335x_baltos_defconfig | 1 +
configs/am335x_boneblack_defc
On 09/12/2017 09:01 PM, Maxime Ripard wrote:
We need to select an interface for the usb_ether gadget, and they haven't
been converted to Kconfig yet. Add a choice to make sure we have an option
selected, and convert all the users.
Reviewed-by: Łukasz Majewski
Signed-off-by: Maxime R
On 09/12/2017 09:01 PM, Maxime Ripard wrote:
All the Allwinner boards use the same manufacturer, VID and PID for the
gadgets. Make them the defaults to remove some boilerplate from our
defconfigs.
Reviewed-by: Łukasz Majewski
Reviewed-by: Simon Glass
Signed-off-by: Maxime Ripard
eviewed-by: Łukasz Majewski
--
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w.
ER="Texas Instruments"
CONFIG_USB_GADGET_VENDOR_NUM=0x0451
CONFIG_USB_GADGET_PRODUCT_NUM=0xd022
-CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_OF_LIBFDT=y
diff --git a/configs/tinker-rk3288_defconfig b/configs/tinker-rk3288_defconfig
index 84fcd8979f20..816fc0189c1d 100644
--- a/configs/tinker-rk3288_defconfig
+++ b/c
= &musb_usb_ops,
+#endif
+ .platdata_auto_alloc_size = sizeof(struct usb_platdata),
+ .priv_auto_alloc_size = sizeof(struct musb_host_data),
+};
Reviewed-by: Łukasz Majewski
--
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Directo
f9224360d758..610fa89056ef 100644
--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
@@ -737,6 +737,8 @@ int misc_init_r(void)
return ret;
#endif
+ usb_ether_init();
+
return 0;
}
Reviewed-by: Łukasz Majewski
--
Best regards,
Lukasz Majewski
--
DENX
PPORT
imply SPL_SERIAL_SUPPORT
+ imply USB_ETHER
imply USB_GADGET
config TARGET_TS4600
Reviewed-by: Łukasz Majewski
--
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebe
On 09/12/2017 09:01 PM, Maxime Ripard wrote:
The kernel DT of the SinA33 has evolved quite a bit. Make sure we sync it
and its upstream DTSI to be able to use the OTG. The DTs were taken from
the 4.13 kernel release.
Reviewed-by: Simon Glass
Signed-off-by: Maxime Ripard
---
arch/arm/dts/axp2
Hi Maxime,
Hi,
This serie aims at fixing an issue we had to carry out of tree patches
for for a few years.
The issue is this: a significant number of Allwinner boards don't have
an Ethernet connection, while an Ethernet connection is pretty useful
for example during development to do some PXE/N
://travis-ci.org/lmajewski/u-boot-dfu/builds/274945208
https://travis-ci.org/lmajewski/u-boot-dfu/builds/274965975
--
Best regards.
Łukasz Majewski
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
ree(dir);
return ret;
}
@@ -1174,6 +1182,7 @@ int fat_readdir(struct fs_dir_stream *dirs, struct
fs_dirent **dentp)
void fat_closedir(struct fs_dir_stream *dirs)
{
fat_dir *dir = (fat_dir *)dirs;
+ free(dir->fsdata.fatbuf);
free(dir);
}
Reviewed-
Hi Fabio,
Hi Lukasz,
On Wed, Sep 13, 2017 at 6:39 AM, Lukasz Majewski wrote:
#ifdef CONFIG_SPI_FLASH_BAR
+/*
+ * This "cleanup" is necessary in a situation when one was accessing
+ * spi flash memory > 16 MiB by using Bank Address Register's BA24 bit.
+ *
+ * After it the BA24 bit shall be
Hi Khem,
On Sun, Sep 17, 2017 at 2:18 AM, Martin Jansa wrote:
Is anyone seeing u-boot-fw-utils.do_install failure with this?
I am seeing same failures too. havent yet dug into it.
Please pay note to change in directory structure in u-boot envs (from
2017.09):
Now to build fw_printenv o
Hi Fabio, Jagan,
Hi Lukasz,
On Wed, Sep 13, 2017 at 6:39 AM, Lukasz Majewski wrote:
#ifdef CONFIG_SPI_FLASH_BAR
+/*
+ * This "cleanup" is necessary in a situation when one was accessing
+ * spi flash memory > 16 MiB by using Bank Address Register's BA24 bit.
+ *
+ * After it the BA24 bit s
On 09/24/2017 08:41 AM, Heinrich Schuchardt wrote:
On 09/23/2017 07:53 PM, Tom Rini wrote:
On Sat, Sep 23, 2017 at 07:43:09PM +0200, Marek Vasut wrote:
On 09/23/2017 07:37 PM, Tom Rini wrote:
On Sat, Sep 23, 2017 at 07:33:44PM +0200, Marek Vasut wrote:
On 09/23/2017 07:05 PM, Tom Rini wrote:
Hi Marek, Tom,
On 09/24/2017 01:36 PM, Tom Rini wrote:
On Sun, Sep 24, 2017 at 10:28:18AM +0200, Marek Vasut wrote:
On 09/24/2017 05:22 AM, Tom Rini wrote:
On Sat, Sep 23, 2017 at 09:07:02PM -0500, Robert Nelson wrote:
On Sat, Sep 23, 2017 at 8:49 PM, Bin Meng wrote:
Hi Tom,
On Sun, Sep 2
Hi Tom,
On Sun, Sep 24, 2017 at 06:50:01PM +0200, Marek Vasut wrote:
On 09/24/2017 04:26 PM, Tom Rini wrote:
The following series has been applied. I am posting this for the record.
For the record, I do not believe that using git submodules is a good approach
here. We have a small amount of
Hi Duncan,
make menuconfig
HOSTCC scripts/kconfig/mconf.o
In file included from scripts/kconfig/mconf.c:23:0:
scripts/kconfig/lxdialog/dialog.h:26:20: fatal error: curses.h: No such file or
directory
#include CURSES_LOC
It seems like you are missing ncurses5-dev package.
Appears CURS
On 09/25/2017 02:37 AM, ali...@peloton-tech.com wrote:
From: Alison Chaiken
Create a common exit for most of the error handling code in
do_rename_gpt_parts. Delete the list elements in disk_partitions
before calling INIT_LIST_HEAD from get_gpt_info() a second time.
The SIZEOF_MISMATCH error
Hi Jagan,
Hi Tom,
Please pull this PR.
Would you find some time and look into following patch:
http://patchwork.ozlabs.org/patch/813266/
Thanks in advance,
Łukasz
thanks!
Jagan.
The following changes since commit 1f6049e2501b5c35c61435dbc05ba96743202674:
tools/mkimage: Make the path
Hi Jagan,
On Wed, Sep 13, 2017 at 3:09 PM, Lukasz Majewski wrote:
The content of Bank Address Register (BAR) is volatile. It is cleared
after power cycle or reset command (RESET F0h).
Some memories (like e.g. s25fl256s) use it to access memory larger than
0x100 (16 MiB).
The problem show
Hi York,
If you don't mind, I would like to ask you for some help and
clarification regarding your work.
Add jump_to_image_linux() for arm64. Add "noreturn" flag to
armv8_switch_to_el2(). Add hooks to fsl-layerscape to enable falcon
boot.
I'm trying to do the same on imx6q board (armv7).
On 09/26/2017 07:40 AM, Jagan Teki wrote:
On Mon, Sep 25, 2017 at 4:10 PM, Lukasz Majewski wrote:
The content of Bank Address Register (BAR) is volatile. It is cleared
after power cycle or reset command (RESET F0h).
Some memories (like e.g. s25fl256s) use it to access memory larger than
0x1000
Hi Jagan,
On 09/26/2017 07:40 AM, Jagan Teki wrote:
On Mon, Sep 25, 2017 at 4:10 PM, Lukasz Majewski wrote:
The content of Bank Address Register (BAR) is volatile. It is cleared
after power cycle or reset command (RESET F0h).
Some memories (like e.g. s25fl256s) use it to access memory larger
Hi Jagan,
On Tue, Sep 26, 2017 at 12:37 PM, Łukasz Majewski wrote:
On 09/26/2017 07:40 AM, Jagan Teki wrote:
On Mon, Sep 25, 2017 at 4:10 PM, Lukasz Majewski wrote:
The content of Bank Address Register (BAR) is volatile. It is cleared
after power cycle or reset command (RESET F0h).
Some
On 09/27/2017 10:04 AM, Jagan Teki wrote:
On Mon, Sep 25, 2017 at 4:10 PM, Lukasz Majewski wrote:
The content of Bank Address Register (BAR) is volatile. It is cleared
after power cycle or reset command (RESET F0h).
Some memories (like e.g. s25fl256s) use it to access memory larger than
0x1000
Hi York,
This board has soldered DDR chips. To reduce the SPL image size,
use static DDR setting instead of dynamic DDR driver.
I'm just wondering - since your board supports FIT in SPL, maybe it
would be good to have a binary blob with DDR RAM settings embedded into it?
Then you would be a
1 - 100 of 109 matches
Mail list logo