According to specification, CFG_PM_RXDLOZ_WAIT should be set to 0x7
when reference clock is at 25 MHz. The specification (at least the
version I have) does not mentoin the setting for 40 MHz reference
clock, but Marvell's U-Boot sets 0xC in that case.
Signed-off-by: Marek Behun
---
drivers/phy/marvell/comphy_a3700.c | 8 +++-
1 file changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/phy/marvell/comphy_a3700.c
b/drivers/phy/marvell/comphy_a3700.c
index b5f2013bbb..78caa96014 100644
--- a/drivers/phy/marvell/comphy_a3700.c
+++ b/drivers/phy/marvell/comphy_a3700.c
@@ -394,20 +394,18 @@ static int comphy_usb3_power_up(u32 lane, u32 type, u32
speed, u32 invert)
/*
* 3. Check crystal jumper setting and program the Power and PLL
* Control accordingly
+* 4. Change RX wait
*/
if (get_ref_clk() == 40) {
/* 40 MHz */
usb3_reg_set16(PWR_PLL_CTRL, 0xFCA3, 0x);
+ usb3_reg_set16(PWR_MGM_TIM1, 0x10C, 0x);
} else {
/* 25 MHz */
usb3_reg_set16(PWR_PLL_CTRL, 0xFCA2, 0x);
+ usb3_reg_set16(PWR_MGM_TIM1, 0x107, 0x);
}
- /*
-* 4. Change RX wait
-*/
- usb3_reg_set16(PWR_MGM_TIM1, 0x10C, 0x);
-
/*
* 5. Enable idle sync
*/
--
2.16.1
___
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
