Re: [U-Boot] [PATCH v2 03/17] thermal: Kconfig: Add IMX_THERMAL entry

[Peng Fan]

Hi Jagan,
On Sat, Sep 17, 2016 at 02:18:35AM +0530, Jagan Teki wrote:
>Added kconfig for IMX_THERMAL driver.
>
>Cc: Simon Glass 
>Cc: Fabio Estevam 
>Cc: Stefano Babic 
>Cc: Peng Fan 
>Cc: Matteo Lisi 
>Cc: Michael Trimarchi 
>Signed-off-by: Jagan Teki 
>---
> drivers/thermal/Kconfig | 13 +
> 1 file changed, 13 insertions(+)
>
>diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
>index 8e22ea7..f0ffbb3 100644
>--- a/drivers/thermal/Kconfig
>+++ b/drivers/thermal/Kconfig
>@@ -5,3 +5,16 @@ config DM_THERMAL
> temperature sensors to permit warnings, speed throttling or even
> automatic power-off when the temperature gets too high or low. Other
> devices may be discrete but connected on a suitable bus.
>+
>+if DM_THERMAL
>+
>+config IMX_THERMAL
>+  bool "Temperature sensor driver for Freescale i.MX SoCs"
>+  depends on MX6

MX6 and MX7.
Also I think this line could be dropped, add "selects IMX_THERMAL" in board 
Kconfig
entry.

Regards,
Peng.

>+  help
>+Support for Temperature Monitor (TEMPMON) found on Freescale i.MX 
>SoCs.
>+  It supports one critical trip point and one passive trip point.  The
>+  cpufreq is used as the cooling device to throttle CPUs when the
>+  passive trip is crossed.
>+
>+endif # if DM_THERMAL
>-- 
>2.7.4
>
>___
>U-Boot mailing list
>U-Boot@lists.denx.de
>http://lists.denx.de/mailman/listinfo/u-boot
___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot

[U-Boot] [PATCH v2 03/17] thermal: Kconfig: Add IMX_THERMAL entry

[Jagan Teki]

Added kconfig for IMX_THERMAL driver.

Cc: Simon Glass 
Cc: Fabio Estevam 
Cc: Stefano Babic 
Cc: Peng Fan 
Cc: Matteo Lisi 
Cc: Michael Trimarchi 
Signed-off-by: Jagan Teki 
---
 drivers/thermal/Kconfig | 13 +
 1 file changed, 13 insertions(+)

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 8e22ea7..f0ffbb3 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -5,3 +5,16 @@ config DM_THERMAL
  temperature sensors to permit warnings, speed throttling or even
  automatic power-off when the temperature gets too high or low. Other
  devices may be discrete but connected on a suitable bus.
+
+if DM_THERMAL
+
+config IMX_THERMAL
+   bool "Temperature sensor driver for Freescale i.MX SoCs"
+   depends on MX6
+   help
+ Support for Temperature Monitor (TEMPMON) found on Freescale i.MX 
SoCs.
+  It supports one critical trip point and one passive trip point.  The
+  cpufreq is used as the cooling device to throttle CPUs when the
+  passive trip is crossed.
+
+endif # if DM_THERMAL
-- 
2.7.4

___
U-Boot mailing list
U-Boot@lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot