We found that just checking for a phantom seems to be what we need. We
did not need to check for RedBack specifically.
Thanks for the help
Doug
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Edward Brown
Sent: Friday, June 27, 2008 12:26 PM
To: u2-us
Colin:
You're the best! I had created a new paragraph called "UDT.ON.PICK" that set
some
15-20 UDT.OPTIONS. I run this in the LOGIN paragraph and had put "EXECUTE
\UDT.ON.PICK\" into the UOLOGIN program. However, I had not re-cataloged it;
thus it
wasn't running in global space. I simply re-
Not only cheap, but much more that just a terminal emulator.
Bruce M Neylon
Health Care Management Group
"Carl Dula" <[EMAIL PROTECTED]>
Sent by: [EMAIL PROTECTED]
06/27/2008 12:14 PM
Please respond to
u2-users@listserver.u2ug.org
To
cc
Subject
RE: [U2] terminal emulator
Take a look
Hello,
Within Unidata, is there any way to intercept commands typed at the
command prompt if they aren't recognised?
It's to 'magically' allow slightly mistyped program names to launch that
program - some of our routine names are quite long - and also to
recognise abbreviated routine names in the
I got the impression (it says so in my notes!) while I was at U2 University
that
an Options entry in the XML map could tell the XDOM (soap download) to ignore
namespaces.
I continue to get Error code: 10
"The location path '/LocPathResponse/LocPathResponse' was not found."
In the xml dow
On Unidata this should work:
Use SYSTEM(49) to retrieve a text description of the call stack. Redback
must use an entry point subroutine to call through to your code, if this
is in the top line of the output then it's running under Redback.
Hth,
Edward
-Original Message-
From: [EMAIL
Actually - all it means is that the port is running in phantom mode.
Not sure if Redback has to be a phantom but certainly other things could be.
YMMV
Colin Alfke
Calgary, Canada
-Original Message-
From: George Hammerle
I cannot find any documentation but in Unidata, @USER.TYPE = 2 indi
Take a look at the following:
http://www.asent.com/products.asp
Works with Citrix, and is cheap!
--
Carl Dula Voice: 973-227-8440 X111
Pulsar Systems, Inc.Fax: 973-227-8440
271 Route 46 West, Suite H209
Anzio Lite and AnzioWin work fine in Citrix. See website below.
On Fri, 27 Jun 2008, Bob Witney wrote:
>
> We are using PowerTerm Lite as our terminal emulator
>
>
>
> Works fine from a PC but sadly won't work through Citrix
>
>
>
> Is anyone using a terminal emulator via Citrix (we have M
We have had clients use accuterm with citrix with no problems I can
recall
Ross Ferris
Stamina Software
Visage > Better by Design!
>-Original Message-
>From: [EMAIL PROTECTED] [mailto:owner-u2-
>[EMAIL PROTECTED] On Behalf Of Bob Witney
>Sent: Friday, 27 June 2008 9:09 PM
>To: u2-users@l
We use mostly Dynamic Connect and some wIntegrate. I am certain that both
of these products will work with Citrix.
--Bill
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bob Witney
Sent: Friday, June 27, 2008 7:09 AM
To: u2-users@listserver.u2ug.org
Cc: And
We user SmarTerm from www.Esker.com
Works great from a PC and via Citrix.
Nicely configurable with Colors, Hotspots, Buttons, Keyboard Mapping and
Triggers.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Bob Witney
Sent: Friday, June 27, 2008 6:09 AM
To:
We are using PowerTerm Lite as our terminal emulator
Works fine from a PC but sadly won't work through Citrix
Is anyone using a terminal emulator via Citrix (we have MAC's that need
to come across that way)
Thanks
Bob Witney
IT Senior
Explore Worldwide
Nelson House
55 Victoria Road
I cannot find any documentation but in Unidata, @USER.TYPE = 2 indicates
that it is Redback.
---
u2-users mailing list
u2-users@listserver.u2ug.org
To unsubscribe please visit http://listserver.u2ug.org/
14 matches
Mail list logo