RE: Suppressing detail in UniObjects command
But doesn't DEP.SUP have two Ps in it? :-) Cheers, Wol -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nick Southwell Sent: 16 March 2004 10:40 To: U2 Users Discussion List Subject: RE: Suppressing detail in UniObjects command Thanks go to Tony and Stuart who both figured it out. DEP.SUP with one P did the trick, ID.SUPP with the two P's seems to work fine too. Many thanks to everyone who pointed me in the right direction. Until next time Cheers Nick -Original Message- From: Tony Wood [mailto:[EMAIL PROTECTED] Sent: 15 March 2004 22:46 To: U2 Users Discussion List Subject: Re: Suppressing detail in UniObjects command Hey Nick, What you NEED to use is DET.SUP and not DET.SUPP (please notice only one P). The error is trying to tell it does not understand DET.SUPP I think. Lembit Pirn was on the right track! Regards, T. - Original Message - From: Nick Southwell [EMAIL PROTECTED] To: U2 Users Discussion List [EMAIL PROTECTED] Sent: Tuesday, March 16, 2004 4:18 AM Subject: RE: Suppressing detail in UniObjects command Cheers, I'll give that a try! Nick -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 15 March 2004 17:16 To: [EMAIL PROTECTED] Subject: RE: Suppressing detail in UniObjects command Yes, it sounds like you use the Pick style by either turning UDT.OPTIONS 2 ON or with ECLTYPE P for your regular sessions. I believe UniObjects defaults to ECLTYPE U. I haven't tried in a UniObjects session to change the ECLTYPE - you just need to learn the U type syntax which is somewhat different but has much more power. Check the online help for list and sort for the basic syntax. If you want to test your commands at TCL you can simply use the lower case list or sort to force UniData to use the U type command parser. hth -- Colin Alfke Calgary, Alberta Canada Just because something isn't broken doesn't mean that you can't fix it Stu Pickles -Original Message- From: Nick Southwell [mailto:[EMAIL PROTECTED] Sent: Monday, March 15, 2004 9:38 AM To: U2 Users Discussion List Subject: RE: Suppressing detail in UniObjects command Sooo.. Coming from a very small Unidata background sounds like you're saying I need to set my ECL type within the Uniobjects session? Thanks Nick -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users This correspondence is confidential and is solely for the intended recipient(s). If you are not the intended recipient, you must not use, disclose, copy, distribute or retain this message or any part of it. If you are not the intended recipient please delete this correspondence from your system and notify the sender immediately. No warranty is given that this correspondence is free from any virus. In keeping with good computer practice, you should ensure that it is actually virus free. E-mail messages may be subject to delays, non-delivery and unauthorised alterations therefore, information expressed in this message is not given or endorsed by Open and Direct Group Limited unless otherwise notified by our duly authorised representative independent of this message. Open and Direct Group Limited is a limited company registered in United Kingdom under number 4390810 whose registered office is at 10 Norwich Street, London, EC4A 1BD -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users This correspondence is confidential and is solely for the intended recipient(s). If you are not the intended recipient, you must not use, disclose, copy, distribute or retain this message or any part of it. If you are not the intended recipient please delete this correspondence from your system and notify the sender immediately. No warranty is given that this correspondence is free from any virus. In keeping with good computer practice, you should ensure that it is actually virus free. E-mail messages may be subject to delays, non-delivery and unauthorised alterations therefore, information expressed in this message is not given or endorsed by Open and Direct Group Limited unless otherwise notified by our duly authorised representative independent of this message. Open and Direct Group Limited is a limited company registered in United Kingdom under number 4390810 whose registered office is at 10 Norwich Street, London, EC4A 1BD -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users *** This transmission is intended for the named recipient only. It may contain private and confidential information. If this has come to you in error you must not act on anything disclosed in it, nor must you copy it, modify it, disseminate it in any way, or show it to anyone. Please e-mail the sender to inform us
RE: Suppressing detail in UniObjects command
Thanks go to Tony and Stuart who both figured it out. DEP.SUP with one P did the trick, ID.SUPP with the two P's seems to work fine too. Many thanks to everyone who pointed me in the right direction. Until next time Cheers Nick -Original Message- From: Tony Wood [mailto:[EMAIL PROTECTED] Sent: 15 March 2004 22:46 To: U2 Users Discussion List Subject: Re: Suppressing detail in UniObjects command Hey Nick, What you NEED to use is DET.SUP and not DET.SUPP (please notice only one P). The error is trying to tell it does not understand DET.SUPP I think. Lembit Pirn was on the right track! Regards, T. - Original Message - From: Nick Southwell [EMAIL PROTECTED] To: U2 Users Discussion List [EMAIL PROTECTED] Sent: Tuesday, March 16, 2004 4:18 AM Subject: RE: Suppressing detail in UniObjects command Cheers, I'll give that a try! Nick -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 15 March 2004 17:16 To: [EMAIL PROTECTED] Subject: RE: Suppressing detail in UniObjects command Yes, it sounds like you use the Pick style by either turning UDT.OPTIONS 2 ON or with ECLTYPE P for your regular sessions. I believe UniObjects defaults to ECLTYPE U. I haven't tried in a UniObjects session to change the ECLTYPE - you just need to learn the U type syntax which is somewhat different but has much more power. Check the online help for list and sort for the basic syntax. If you want to test your commands at TCL you can simply use the lower case list or sort to force UniData to use the U type command parser. hth -- Colin Alfke Calgary, Alberta Canada Just because something isn't broken doesn't mean that you can't fix it Stu Pickles -Original Message- From: Nick Southwell [mailto:[EMAIL PROTECTED] Sent: Monday, March 15, 2004 9:38 AM To: U2 Users Discussion List Subject: RE: Suppressing detail in UniObjects command Sooo.. Coming from a very small Unidata background sounds like you're saying I need to set my ECL type within the Uniobjects session? Thanks Nick -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users This correspondence is confidential and is solely for the intended recipient(s). If you are not the intended recipient, you must not use, disclose, copy, distribute or retain this message or any part of it. If you are not the intended recipient please delete this correspondence from your system and notify the sender immediately. No warranty is given that this correspondence is free from any virus. In keeping with good computer practice, you should ensure that it is actually virus free. E-mail messages may be subject to delays, non-delivery and unauthorised alterations therefore, information expressed in this message is not given or endorsed by Open and Direct Group Limited unless otherwise notified by our duly authorised representative independent of this message. Open and Direct Group Limited is a limited company registered in United Kingdom under number 4390810 whose registered office is at 10 Norwich Street, London, EC4A 1BD -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users This correspondence is confidential and is solely for the intended recipient(s). If you are not the intended recipient, you must not use, disclose, copy, distribute or retain this message or any part of it. If you are not the intended recipient please delete this correspondence from your system and notify the sender immediately. No warranty is given that this correspondence is free from any virus. In keeping with good computer practice, you should ensure that it is actually virus free. E-mail messages may be subject to delays, non-delivery and unauthorised alterations therefore, information expressed in this message is not given or endorsed by Open and Direct Group Limited unless otherwise notified by our duly authorised representative independent of this message. Open and Direct Group Limited is a limited company registered in United Kingdom under number 4390810 whose registered office is at 10 Norwich Street, London, EC4A 1BD -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users
Re: Suppressing detail in UniObjects command
Have You tried with DET.SUP ? Just idea, synonyms. Lembit Pirn 7+7 Software Tondi 1 Tallinn 11313 Estonia +372 65 66 232 [EMAIL PROTECTED] - Original Message - From: Nick Southwell [EMAIL PROTECTED] To: U2 Users Discussion List [EMAIL PROTECTED] Sent: Monday, March 15, 2004 6:15 PM Subject: Suppressing detail in UniObjects command Trying to run the command SORT FILE WITH ACTION-CODE = NAG BY WEB-IND BREAK-ON WEB-IND TOTAL CRED.AMT TOTAL COUNT DET.SUPP ID.SUPP via a vb6 program using Uniobjects. objCommand.Text = SORT DTA WITH ACTION-CODE = 'NAG' BY WEB-IND BREAK-ON WEB-IND TOTAL CRED.AMT TOTAL COUNT DET.SUPP ID.SUPP objCommand.Exec The program returns immediately with CommandStatus = 0 Error = 0 and response DET.SUPP is not a valid attribute. Any ideas? This works perfectly from the udt prompt. Thanks Nick This correspondence is confidential and is solely for the intended recipient(s). If you are not the intended recipient, you must not use, disclose, copy, distribute or retain this message or any part of it. If you are not the intended recipient please delete this correspondence from your system and notify the sender immediately. No warranty is given that this correspondence is free from any virus. In keeping with good computer practice, you should ensure that it is actually virus free. E-mail messages may be subject to delays, non-delivery and unauthorised alterations therefore, information expressed in this message is not given or endorsed by Open and Direct Group Limited unless otherwise notified by our duly authorised representative independent of this message. Open and Direct Group Limited is a limited company registered in United Kingdom under number 4390810 whose registered office is at 10 Norwich Street, London, EC4A 1BD -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users
RE: Suppressing detail in UniObjects command
Sounds like your ECL type is set differently for your login and Objects sessions. Remember, UniObjects doesn't run LOGIN. Brian -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nick Southwell Sent: 15 March 2004 16:15 To: U2 Users Discussion List Subject: Suppressing detail in UniObjects command Trying to run the command SORT FILE WITH ACTION-CODE = NAG BY WEB-IND BREAK-ON WEB-IND TOTAL CRED.AMT TOTAL COUNT DET.SUPP ID.SUPP via a vb6 program using Uniobjects. objCommand.Text = SORT DTA WITH ACTION-CODE = 'NAG' BY WEB-IND BREAK-ON WEB-IND TOTAL CRED.AMT TOTAL COUNT DET.SUPP ID.SUPP objCommand.Exec The program returns immediately with CommandStatus = 0 Error = 0 and response DET.SUPP is not a valid attribute. Any ideas? This works perfectly from the udt prompt. Thanks Nick This correspondence is confidential and is solely for the intended recipient(s). If you are not the intended recipient, you must not use, disclose, copy, distribute or retain this message or any part of it. If you are not the intended recipient please delete this correspondence from your system and notify the sender immediately. No warranty is given that this correspondence is free from any virus. In keeping with good computer practice, you should ensure that it is actually virus free. E-mail messages may be subject to delays, non-delivery and unauthorised alterations therefore, information expressed in this message is not given or endorsed by Open and Direct Group Limited unless otherwise notified by our duly authorised representative independent of this message. Open and Direct Group Limited is a limited company registered in United Kingdom under number 4390810 whose registered office is at 10 Norwich Street, London, EC4A 1BD -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users __ __ This email was checked by MessageLabs SkyScan before entering Microgen. This email was checked on leaving Microgen for viruses, similar malicious code and inappropriate content by MessageLabs SkyScan. DISCLAIMER This email and any attachments are confidential and may also be privileged. If you are not the named recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information. In the event of any technical difficulty with this email, please contact the sender or [EMAIL PROTECTED] Microgen Information Management Solutions http://www.microgen.co.uk -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users
RE: Suppressing detail in UniObjects command
It produces output with just ID.SUPP but same error with DET.SUPP on its own. Thanks Nick -Original Message- From: Lembit Pirn [mailto:[EMAIL PROTECTED] Sent: 15 March 2004 16:31 To: U2 Users Discussion List Subject: Re: Suppressing detail in UniObjects command Have You tried with DET.SUP ? Just idea, synonyms. Lembit Pirn 7+7 Software Tondi 1 Tallinn 11313 Estonia +372 65 66 232 [EMAIL PROTECTED] - Original Message - From: Nick Southwell [EMAIL PROTECTED] To: U2 Users Discussion List [EMAIL PROTECTED] Sent: Monday, March 15, 2004 6:15 PM Subject: Suppressing detail in UniObjects command Trying to run the command SORT FILE WITH ACTION-CODE = NAG BY WEB-IND BREAK-ON WEB-IND TOTAL CRED.AMT TOTAL COUNT DET.SUPP ID.SUPP via a vb6 program using Uniobjects. objCommand.Text = SORT DTA WITH ACTION-CODE = 'NAG' BY WEB-IND BREAK-ON WEB-IND TOTAL CRED.AMT TOTAL COUNT DET.SUPP ID.SUPP objCommand.Exec The program returns immediately with CommandStatus = 0 Error = 0 and response DET.SUPP is not a valid attribute. Any ideas? This works perfectly from the udt prompt. Thanks Nick This correspondence is confidential and is solely for the intended recipient(s). If you are not the intended recipient, you must not use, disclose, copy, distribute or retain this message or any part of it. If you are not the intended recipient please delete this correspondence from your system and notify the sender immediately. No warranty is given that this correspondence is free from any virus. In keeping with good computer practice, you should ensure that it is actually virus free. E-mail messages may be subject to delays, non-delivery and unauthorised alterations therefore, information expressed in this message is not given or endorsed by Open and Direct Group Limited unless otherwise notified by our duly authorised representative independent of this message. Open and Direct Group Limited is a limited company registered in United Kingdom under number 4390810 whose registered office is at 10 Norwich Street, London, EC4A 1BD -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users This correspondence is confidential and is solely for the intended recipient(s). If you are not the intended recipient, you must not use, disclose, copy, distribute or retain this message or any part of it. If you are not the intended recipient please delete this correspondence from your system and notify the sender immediately. No warranty is given that this correspondence is free from any virus. In keeping with good computer practice, you should ensure that it is actually virus free. E-mail messages may be subject to delays, non-delivery and unauthorised alterations therefore, information expressed in this message is not given or endorsed by Open and Direct Group Limited unless otherwise notified by our duly authorised representative independent of this message. Open and Direct Group Limited is a limited company registered in United Kingdom under number 4390810 whose registered office is at 10 Norwich Street, London, EC4A 1BD -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users
RE: Suppressing detail in UniObjects command
Sooo.. Coming from a very small Unidata background sounds like you're saying I need to set my ECL type within the Uniobjects session? Thanks Nick -Original Message- From: Brian Leach [mailto:[EMAIL PROTECTED] Sent: 15 March 2004 16:30 To: 'U2 Users Discussion List' Subject: RE: Suppressing detail in UniObjects command Sounds like your ECL type is set differently for your login and Objects sessions. Remember, UniObjects doesn't run LOGIN. Brian -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Nick Southwell Sent: 15 March 2004 16:15 To: U2 Users Discussion List Subject: Suppressing detail in UniObjects command Trying to run the command SORT FILE WITH ACTION-CODE = NAG BY WEB-IND BREAK-ON WEB-IND TOTAL CRED.AMT TOTAL COUNT DET.SUPP ID.SUPP via a vb6 program using Uniobjects. objCommand.Text = SORT DTA WITH ACTION-CODE = 'NAG' BY WEB-IND BREAK-ON WEB-IND TOTAL CRED.AMT TOTAL COUNT DET.SUPP ID.SUPP objCommand.Exec The program returns immediately with CommandStatus = 0 Error = 0 and response DET.SUPP is not a valid attribute. Any ideas? This works perfectly from the udt prompt. Thanks Nick This correspondence is confidential and is solely for the intended recipient(s). If you are not the intended recipient, you must not use, disclose, copy, distribute or retain this message or any part of it. If you are not the intended recipient please delete this correspondence from your system and notify the sender immediately. No warranty is given that this correspondence is free from any virus. In keeping with good computer practice, you should ensure that it is actually virus free. E-mail messages may be subject to delays, non-delivery and unauthorised alterations therefore, information expressed in this message is not given or endorsed by Open and Direct Group Limited unless otherwise notified by our duly authorised representative independent of this message. Open and Direct Group Limited is a limited company registered in United Kingdom under number 4390810 whose registered office is at 10 Norwich Street, London, EC4A 1BD -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users __ __ This email was checked by MessageLabs SkyScan before entering Microgen. This email was checked on leaving Microgen for viruses, similar malicious code and inappropriate content by MessageLabs SkyScan. DISCLAIMER This email and any attachments are confidential and may also be privileged. If you are not the named recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information. In the event of any technical difficulty with this email, please contact the sender or [EMAIL PROTECTED] Microgen Information Management Solutions http://www.microgen.co.uk -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users This correspondence is confidential and is solely for the intended recipient(s). If you are not the intended recipient, you must not use, disclose, copy, distribute or retain this message or any part of it. If you are not the intended recipient please delete this correspondence from your system and notify the sender immediately. No warranty is given that this correspondence is free from any virus. In keeping with good computer practice, you should ensure that it is actually virus free. E-mail messages may be subject to delays, non-delivery and unauthorised alterations therefore, information expressed in this message is not given or endorsed by Open and Direct Group Limited unless otherwise notified by our duly authorised representative independent of this message. Open and Direct Group Limited is a limited company registered in United Kingdom under number 4390810 whose registered office is at 10 Norwich Street, London, EC4A 1BD -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users
RE: Suppressing detail in UniObjects command
Yes, it sounds like you use the Pick style by either turning UDT.OPTIONS 2 ON or with ECLTYPE P for your regular sessions. I believe UniObjects defaults to ECLTYPE U. I haven't tried in a UniObjects session to change the ECLTYPE - you just need to learn the U type syntax which is somewhat different but has much more power. Check the online help for list and sort for the basic syntax. If you want to test your commands at TCL you can simply use the lower case list or sort to force UniData to use the U type command parser. hth -- Colin Alfke Calgary, Alberta Canada Just because something isn't broken doesn't mean that you can't fix it Stu Pickles -Original Message- From: Nick Southwell [mailto:[EMAIL PROTECTED] Sent: Monday, March 15, 2004 9:38 AM To: U2 Users Discussion List Subject: RE: Suppressing detail in UniObjects command Sooo.. Coming from a very small Unidata background sounds like you're saying I need to set my ECL type within the Uniobjects session? Thanks Nick -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users
RE: Suppressing detail in UniObjects command
Cheers, I'll give that a try! Nick -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: 15 March 2004 17:16 To: [EMAIL PROTECTED] Subject: RE: Suppressing detail in UniObjects command Yes, it sounds like you use the Pick style by either turning UDT.OPTIONS 2 ON or with ECLTYPE P for your regular sessions. I believe UniObjects defaults to ECLTYPE U. I haven't tried in a UniObjects session to change the ECLTYPE - you just need to learn the U type syntax which is somewhat different but has much more power. Check the online help for list and sort for the basic syntax. If you want to test your commands at TCL you can simply use the lower case list or sort to force UniData to use the U type command parser. hth -- Colin Alfke Calgary, Alberta Canada Just because something isn't broken doesn't mean that you can't fix it Stu Pickles -Original Message- From: Nick Southwell [mailto:[EMAIL PROTECTED] Sent: Monday, March 15, 2004 9:38 AM To: U2 Users Discussion List Subject: RE: Suppressing detail in UniObjects command Sooo.. Coming from a very small Unidata background sounds like you're saying I need to set my ECL type within the Uniobjects session? Thanks Nick -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users This correspondence is confidential and is solely for the intended recipient(s). If you are not the intended recipient, you must not use, disclose, copy, distribute or retain this message or any part of it. If you are not the intended recipient please delete this correspondence from your system and notify the sender immediately. No warranty is given that this correspondence is free from any virus. In keeping with good computer practice, you should ensure that it is actually virus free. E-mail messages may be subject to delays, non-delivery and unauthorised alterations therefore, information expressed in this message is not given or endorsed by Open and Direct Group Limited unless otherwise notified by our duly authorised representative independent of this message. Open and Direct Group Limited is a limited company registered in United Kingdom under number 4390810 whose registered office is at 10 Norwich Street, London, EC4A 1BD -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users
RE: Suppressing detail in UniObjects command
DET.SUPP is not a valid attribute. Any ideas? This works perfectly from the udt prompt. Try ID.SUP DET.SUP (just one 'P'). ** This email message and any files transmitted with it are confidential and intended solely for the use of addressed recipient(s). If you have received this email in error please notify the Spotless IS Support Centre (61 3 9269 7555) immediately who will advise further action. This footnote also confirms that this email message has been scanned for the presence of computer viruses. ** -- u2-users mailing list [EMAIL PROTECTED] http://www.oliver.com/mailman/listinfo/u2-users
