Message --
> From: "RickG" <rgunder...@gmail.com>
> To: "Ubiquiti Users Group" <ubnt_users@wispa.org>
> Sent: 1/10/2018 12:20:14 PM
> Subject: Re: [Ubnt_users] Aircontrol pulls in public ip addresses instead
> of private ips.
>
> If it helps, I
00) To: Ubiquiti
Users Group <ubnt_users@wispa.org> Subject: Re: [Ubnt_users] Aircontrol pulls
in public ip addresses instead of private ips.
Have you tried specifying in the nat rule to never nat to the aircontrol's
dst-ip?
Sent from my Verizon, Samsung Galaxy smartphone
---
gt;
Subject: Re: [Ubnt_users] Aircontrol pulls in public ip addresses instead of
private ips.
yes it is nat'd on same network.this has worked fine for last 8 years that
we have used air control. its just in the last few months this started
happening.
Thanks,
Kevin Melson
Eagle One
-- Original Message --
From: "RickG" <rgunder...@gmail.com>
To: "Ubiquiti Users Group" <ubnt_users@wispa.org>
Sent: 1/10/2018 12:20:14 PM
Subject: Re: [Ubnt_users] Aircontrol pulls in public ip addresses
instead of private ips.
If it helps, I can tell
If it helps, I can tell you I have Nat'd devices on AC2 but they do not
pull in the publics. Is your AC2 Nat'd on the same network? My AC2 does do
a strange thing once in a while though - it pulls in the gateway address,
which is my Mikrotik rather than the radio address.
On Wed, Jan 10, 2018 at
Aircontrol is pulling in our public ip addresses instead or our private
addresses. These ip addresses are nat'd in the mikrotik. This only
started couple beta versions back in aircontrol. We have almost 700
radios in aircontrol. 95 show up as our public ip addresses instead of
our private
