SSH didn't work for me either. Neither did ping nor a reboot. Funny though
as it passed traffic!
On Fri, Jan 9, 2015 at 2:59 PM, Ty Featherling tyfeatherl...@gmail.com
wrote:
SSH didn't work from the AP to the one that doesn't respond to SSH anyway.
It did from the other but same problem,
ARC-BR9003S01
Got the number off a pic file. Google search should find you one.
On Jan 9, 2015 4:36 PM, heith wi...@mncomm.com wrote:
Id be interested in that, the antenna rocked but that ball joint didn’t.
Do you happen to know the part number of the Antenna? I came across ARC
PD5820B88 but
I have seen this many times but I am wondering if anyone knows the cause or
a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel
width. Before I do so I am making sure I can reach all associated radios so
that I can migrate them as well of course. I have 2 different customers
Firmware versions? 5.5.4 had some bad memory leaks. 5.5.6 had a moderate
memleak with SNMP enabled
On January 9, 2015 7:21:23 AM AKST, Ty Featherling tyfeatherl...@gmail.com
wrote:
I have seen this many times but I am wondering if anyone knows the
cause or
a remote solution. I am going to
I've got one now that I swapped out. Going to look at it soon. Will advise.
On Fri, Jan 9, 2015 at 11:21 AM, Ty Featherling tyfeatherl...@gmail.com
wrote:
I have seen this many times but I am wondering if anyone knows the cause
or a remote solution. I am going to migrate an AP from 10mhz to
Yes I am running WDS everywhere Adair.
-Ty
On Fri, Jan 9, 2015 at 10:36 AM, Adair Winter ada...@amarillowireless.net
wrote:
Are you running WDS on both sides?
On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com
wrote:
I have seen this many times but I am wondering if
Are you running WDS on both sides?
On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com
wrote:
I have seen this many times but I am wondering if anyone knows the cause
or a remote solution. I am going to migrate an AP from 10mhz to 20mhz
channel width. Before I do so I am
So we have been installing a few UniFi devices, as tests, in some of our
customers houses. Mostly due to size of their structure, multiple and
varying devices and streaming devices where our basic routers just weren't
cutting it. Its about time to charge these customers. We have been
installing
A few years back I purchased a set of antennas to use on Rocket M5 radios.
We had a link that used a set of M5 Power Bridges that we needed to replace,
but the structure wouldn't support a Rocket Dish. We ordered a set of panel
MIMO antennas and used Rocket M5 radios on it. I want to say it was an
Try SSH into the AP, then SSH into the Station. Might have to ping it from the
AP first.
From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On
Behalf Of Ty Featherling
Sent: Friday, January 09, 2015 9:43 AM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users]
I will try. I tried SSH from the tower router. No dice.
-Ty
On Fri, Jan 9, 2015 at 12:08 PM, Jerry Richardson je...@richardson.bz
wrote:
Try SSH into the AP, then SSH into the Station. Might have to ping it from
the AP first.
*From:* ubnt_users-boun...@wispa.org
SSH didn't work from the AP to the one that doesn't respond to SSH anyway.
It did from the other but same problem, reboot command does nothing. It IS
just radio# reboot right? Ping command from affected radio works fine.
-Ty
On Fri, Jan 9, 2015 at 1:50 PM, Ty Featherling tyfeatherl...@gmail.com
We charge $15 per month per access point and give them a management
interface.
Works well for our larger houses.
*From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] *On
Behalf Of *heith
*Sent:* Friday, January 9, 2015 12:49 PM
*To:* 'Ubiquiti Users Group'
*Subject:*
Bunch of people have used the ARC dual pol panels with the ball joint
mount. It's stable enough to hold my 180 pound self.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Jan 9, 2015 at 5:10 PM, heith wi...@mncomm.com wrote:
A few years
Id be interested in that, the antenna rocked but that ball joint didn’t. Do you
happen to know the part number of the Antenna? I came across ARC PD5820B88 but
not sure if that’s the correct number
From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On
Behalf Of Joey
Is there such a thing? I'm trying to estimate what is possible for a link I
am about to set up. I know this product isn't available in in the online
link planner. A link-planner like the one AF5 has would be super helpful
here.
-Ty
___
Ubnt_users
16 matches
Mail list logo