Re: [Ubnt_users] Station connected and working but management UI won't respond
SSH didn't work for me either. Neither did ping nor a reboot. Funny though as it passed traffic! On Fri, Jan 9, 2015 at 2:59 PM, Ty Featherling tyfeatherl...@gmail.com wrote: SSH didn't work from the AP to the one that doesn't respond to SSH anyway. It did from the other but same problem, reboot command does nothing. It IS just radio# reboot right? Ping command from affected radio works fine. -Ty On Fri, Jan 9, 2015 at 1:50 PM, Ty Featherling tyfeatherl...@gmail.com wrote: I will try. I tried SSH from the tower router. No dice. -Ty On Fri, Jan 9, 2015 at 12:08 PM, Jerry Richardson je...@richardson.bz wrote: Try SSH into the AP, then SSH into the Station. Might have to ping it from the AP first. *From:* ubnt_users-boun...@wispa.org [mailto: ubnt_users-boun...@wispa.org] *On Behalf Of *Ty Featherling *Sent:* Friday, January 09, 2015 9:43 AM *To:* Ubiquiti Users Group *Subject:* Re: [Ubnt_users] Station connected and working but management UI won't respond Yes I am running WDS everywhere Adair. -Ty On Fri, Jan 9, 2015 at 10:36 AM, Adair Winter ada...@amarillowireless.net wrote: Are you running WDS on both sides? On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071 C: 806.231.7180 http://www.amarillowireless.net ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- -RickG KyWiFi ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Panel Antenna for M5 Rocket Radio
ARC-BR9003S01 Got the number off a pic file. Google search should find you one. On Jan 9, 2015 4:36 PM, heith wi...@mncomm.com wrote: Id be interested in that, the antenna rocked but that ball joint didn’t. Do you happen to know the part number of the Antenna? I came across ARC PD5820B88 but not sure if that’s the correct number *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] *On Behalf Of *Joey Craig *Sent:* Friday, January 09, 2015 4:25 PM *To:* Ubiquiti Users Group *Subject:* Re: [Ubnt_users] Panel Antenna for M5 Rocket Radio I use the ARC panels also but replace the ball joint style mount with their HD L-bracket mount. About $20 if I recall. On Jan 9, 2015 4:16 PM, Josh Luthman j...@imaginenetworksllc.com wrote: Bunch of people have used the ARC dual pol panels with the ball joint mount. It's stable enough to hold my 180 pound self. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Jan 9, 2015 at 5:10 PM, heith wi...@mncomm.com wrote: A few years back I purchased a set of antennas to use on Rocket M5 radios. We had a link that used a set of M5 Power Bridges that we needed to replace, but the structure wouldn’t support a Rocket Dish. We ordered a set of panel MIMO antennas and used Rocket M5 radios on it. I want to say it was an ARC wireless antenna, but I bought it from a distributor and cant find what I did (bad record keeping). Anyways they worked out well with awesome signal, but the adjustment was via a ball joint that was fairly unstable. I had a rocket M5 fail on one these panels yesterday in this shitty weather and the panel was flopping in the wind. It was too windy or intolerable to try to pull off any part numbers but I don’t want to order another one of these again. Anyways if anyone has used a MIMO panel on a Rocket that has been good and are happy with it I would like to know Thanks Heith ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5577 / Virus Database: 4257/8833 - Release Date: 12/29/14 Internal Virus Database is out of date. ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
[Ubnt_users] Station connected and working but management UI won't respond
I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Station connected and working but management UI won't respond
Firmware versions? 5.5.4 had some bad memory leaks. 5.5.6 had a moderate memleak with SNMP enabled On January 9, 2015 7:21:23 AM AKST, Ty Featherling tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- Sent from my Android device with K-9 Mail. Please excuse my brevity.___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Station connected and working but management UI won't respond
I've got one now that I swapped out. Going to look at it soon. Will advise. On Fri, Jan 9, 2015 at 11:21 AM, Ty Featherling tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- -RickG KyWiFi ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Station connected and working but management UI won't respond
Yes I am running WDS everywhere Adair. -Ty On Fri, Jan 9, 2015 at 10:36 AM, Adair Winter ada...@amarillowireless.net wrote: Are you running WDS on both sides? On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071 C: 806.231.7180 http://www.amarillowireless.net ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Station connected and working but management UI won't respond
Are you running WDS on both sides? On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071 C: 806.231.7180 http://www.amarillowireless.net ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
[Ubnt_users] UniFi Service for home users
So we have been installing a few UniFi devices, as tests, in some of our customers houses. Mostly due to size of their structure, multiple and varying devices and streaming devices where our basic routers just weren't cutting it. Its about time to charge these customers. We have been installing them to our cloud controller for management in cases where we wouldn't need an onsite controller. Questions is for others doing the same thing, what do you do for charging? Do you charge for the equipment a one time fee plus install if applicable, or a small one time fee and a monthly rental or management fee? I would like to market the hell out of these for our higher end customers, but I want to make sure we make some money. I wouldn't mind doing a small monthly recurring fee on top of their service fee for monthly internet service. If they drop the service I just get our gear back. I suppose depending on how many devices the needed, maybe a small upfront fee for each device, theres really not much additional cost for management of several devices I appreciate any input Thanks Heith MNWireless ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
[Ubnt_users] Panel Antenna for M5 Rocket Radio
A few years back I purchased a set of antennas to use on Rocket M5 radios. We had a link that used a set of M5 Power Bridges that we needed to replace, but the structure wouldn't support a Rocket Dish. We ordered a set of panel MIMO antennas and used Rocket M5 radios on it. I want to say it was an ARC wireless antenna, but I bought it from a distributor and cant find what I did (bad record keeping). Anyways they worked out well with awesome signal, but the adjustment was via a ball joint that was fairly unstable. I had a rocket M5 fail on one these panels yesterday in this shitty weather and the panel was flopping in the wind. It was too windy or intolerable to try to pull off any part numbers but I don't want to order another one of these again. Anyways if anyone has used a MIMO panel on a Rocket that has been good and are happy with it I would like to know Thanks Heith ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Station connected and working but management UI won't respond
Try SSH into the AP, then SSH into the Station. Might have to ping it from the AP first. From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Ty Featherling Sent: Friday, January 09, 2015 9:43 AM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Station connected and working but management UI won't respond Yes I am running WDS everywhere Adair. -Ty On Fri, Jan 9, 2015 at 10:36 AM, Adair Winter ada...@amarillowireless.net mailto:ada...@amarillowireless.net wrote: Are you running WDS on both sides? On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com mailto:tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org mailto:Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071 tel:806.316.5071 C: 806.231.7180 tel:806.231.7180 http://www.amarillowireless.net http://www.amarillowireless.net ___ Ubnt_users mailing list Ubnt_users@wispa.org mailto:Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Station connected and working but management UI won't respond
I will try. I tried SSH from the tower router. No dice. -Ty On Fri, Jan 9, 2015 at 12:08 PM, Jerry Richardson je...@richardson.bz wrote: Try SSH into the AP, then SSH into the Station. Might have to ping it from the AP first. *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] *On Behalf Of *Ty Featherling *Sent:* Friday, January 09, 2015 9:43 AM *To:* Ubiquiti Users Group *Subject:* Re: [Ubnt_users] Station connected and working but management UI won't respond Yes I am running WDS everywhere Adair. -Ty On Fri, Jan 9, 2015 at 10:36 AM, Adair Winter ada...@amarillowireless.net wrote: Are you running WDS on both sides? On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071 C: 806.231.7180 http://www.amarillowireless.net ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Station connected and working but management UI won't respond
SSH didn't work from the AP to the one that doesn't respond to SSH anyway. It did from the other but same problem, reboot command does nothing. It IS just radio# reboot right? Ping command from affected radio works fine. -Ty On Fri, Jan 9, 2015 at 1:50 PM, Ty Featherling tyfeatherl...@gmail.com wrote: I will try. I tried SSH from the tower router. No dice. -Ty On Fri, Jan 9, 2015 at 12:08 PM, Jerry Richardson je...@richardson.bz wrote: Try SSH into the AP, then SSH into the Station. Might have to ping it from the AP first. *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] *On Behalf Of *Ty Featherling *Sent:* Friday, January 09, 2015 9:43 AM *To:* Ubiquiti Users Group *Subject:* Re: [Ubnt_users] Station connected and working but management UI won't respond Yes I am running WDS everywhere Adair. -Ty On Fri, Jan 9, 2015 at 10:36 AM, Adair Winter ada...@amarillowireless.net wrote: Are you running WDS on both sides? On Fri, Jan 9, 2015 at 10:21 AM, Ty Featherling tyfeatherl...@gmail.com wrote: I have seen this many times but I am wondering if anyone knows the cause or a remote solution. I am going to migrate an AP from 10mhz to 20mhz channel width. Before I do so I am making sure I can reach all associated radios so that I can migrate them as well of course. I have 2 different customers on this AP that are connected and online but the radio just will not respond via the web interface. One of them will respond via SSH but the other won't. I tried the reboot command on the one that did respond but any command I try to run just stalls the session. I call the two customers and of course neither is around to power cycle the units. Is there a known cause for this or a way to snap them out of their daze remotely? -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users -- Adair Winter VP, Network Operations / Owner Amarillo Wireless | 806.316.5071 C: 806.231.7180 http://www.amarillowireless.net ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] UniFi Service for home users
We charge $15 per month per access point and give them a management interface. Works well for our larger houses. *From:* ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] *On Behalf Of *heith *Sent:* Friday, January 9, 2015 12:49 PM *To:* 'Ubiquiti Users Group' *Subject:* [Ubnt_users] UniFi Service for home users So we have been installing a few UniFi devices, as tests, in some of our customers houses. Mostly due to size of their structure, multiple and varying devices and streaming devices where our basic routers just weren’t cutting it. Its about time to charge these customers. We have been installing them to our cloud controller for management in cases where we wouldn’t need an onsite controller. Questions is for others doing the same thing, what do you do for charging? Do you charge for the equipment a one time fee plus install if applicable, or a small one time fee and a monthly rental or management fee? I would like to market the hell out of these for our higher end customers, but I want to make sure we make some money. I wouldn’t mind doing a small monthly recurring fee on top of their service fee for monthly internet service. If they drop the service I just get our gear back. I suppose depending on how many devices the needed, maybe a small upfront fee for each device, theres really not much additional cost for management of several devices I appreciate any input Thanks Heith MNWireless ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Panel Antenna for M5 Rocket Radio
Bunch of people have used the ARC dual pol panels with the ball joint mount. It's stable enough to hold my 180 pound self. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Jan 9, 2015 at 5:10 PM, heith wi...@mncomm.com wrote: A few years back I purchased a set of antennas to use on Rocket M5 radios. We had a link that used a set of M5 Power Bridges that we needed to replace, but the structure wouldn’t support a Rocket Dish. We ordered a set of panel MIMO antennas and used Rocket M5 radios on it. I want to say it was an ARC wireless antenna, but I bought it from a distributor and cant find what I did (bad record keeping). Anyways they worked out well with awesome signal, but the adjustment was via a ball joint that was fairly unstable. I had a rocket M5 fail on one these panels yesterday in this shitty weather and the panel was flopping in the wind. It was too windy or intolerable to try to pull off any part numbers but I don’t want to order another one of these again. Anyways if anyone has used a MIMO panel on a Rocket that has been good and are happy with it I would like to know Thanks Heith ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
Re: [Ubnt_users] Panel Antenna for M5 Rocket Radio
Id be interested in that, the antenna rocked but that ball joint didn’t. Do you happen to know the part number of the Antenna? I came across ARC PD5820B88 but not sure if that’s the correct number From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On Behalf Of Joey Craig Sent: Friday, January 09, 2015 4:25 PM To: Ubiquiti Users Group Subject: Re: [Ubnt_users] Panel Antenna for M5 Rocket Radio I use the ARC panels also but replace the ball joint style mount with their HD L-bracket mount. About $20 if I recall. On Jan 9, 2015 4:16 PM, Josh Luthman j...@imaginenetworksllc.com wrote: Bunch of people have used the ARC dual pol panels with the ball joint mount. It's stable enough to hold my 180 pound self. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Jan 9, 2015 at 5:10 PM, heith wi...@mncomm.com wrote: A few years back I purchased a set of antennas to use on Rocket M5 radios. We had a link that used a set of M5 Power Bridges that we needed to replace, but the structure wouldn’t support a Rocket Dish. We ordered a set of panel MIMO antennas and used Rocket M5 radios on it. I want to say it was an ARC wireless antenna, but I bought it from a distributor and cant find what I did (bad record keeping). Anyways they worked out well with awesome signal, but the adjustment was via a ball joint that was fairly unstable. I had a rocket M5 fail on one these panels yesterday in this shitty weather and the panel was flopping in the wind. It was too windy or intolerable to try to pull off any part numbers but I don’t want to order another one of these again. Anyways if anyone has used a MIMO panel on a Rocket that has been good and are happy with it I would like to know Thanks Heith ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users _ No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5577 / Virus Database: 4257/8833 - Release Date: 12/29/14 Internal Virus Database is out of date. ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users
[Ubnt_users] Rocket AC PTP throughput chart?
Is there such a thing? I'm trying to estimate what is possible for a link I am about to set up. I know this product isn't available in in the online link planner. A link-planner like the one AF5 has would be super helpful here. -Ty ___ Ubnt_users mailing list Ubnt_users@wispa.org http://lists.wispa.org/mailman/listinfo/ubnt_users