Re: [Ubnt_users] Bad Omni???

2016-09-04 Thread Jonathan Taylor
Which antennas do you use? *Jonathan Taylor* *WiSouth Networks, LLC* jtay...@wisouth.net *(334) 595-9521* On Sun, Sep 4, 2016 at 8:46 PM, Mathew Howard wrote: > Yeah... I would replace it. You might be able to just take it apart and > re-glue everything, but it's probably

Re: [Ubnt_users] Bad Omni???

2016-09-04 Thread Mathew Howard
Yeah... I would replace it. You might be able to just take it apart and re-glue everything, but it's probably really not worth while. I only remember having a similar failure on one, which also had the top cap come off - which I think is what caused the glue to fail, since the drain holes

Re: [Ubnt_users] Bad Omni???

2016-09-04 Thread Josh Luthman
If a rain effects things like that in 2 GHz it's well past time to replace that thing. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sun, Sep 4, 2016 at 9:15 PM, Jonathan Taylor wrote: > Yea it is around 3-4 years old

Re: [Ubnt_users] Bad Omni???

2016-09-04 Thread Chris Fabien
I just took one of these apart like this. I suspected a problem but ours was still operating fine. Some of the screws in the base had worked loose. The elements are fed by short pieces of coax so the movement does not mean a broken circuit board or connector or something. The faulire mode we

Re: [Ubnt_users] Bad Omni???

2016-09-04 Thread Josh Luthman
I've always used Kp Omni's so I don't have these problems ;) Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 4, 2016 8:44 PM, "Jonathan Taylor" wrote: > What about rain running down the radome and buidling up inside? I

Re: [Ubnt_users] Bad Omni???

2016-09-04 Thread Jonathan Taylor
What about rain running down the radome and buidling up inside? I have never taken one of these apart so i don't know what it looks like on the bottom. *Jonathan Taylor* *WiSouth Networks, LLC* jtay...@wisouth.net *(334) 595-9521* On Sun, Sep 4, 2016 at 7:38 PM, Josh Luthman

Re: [Ubnt_users] Bad Omni???

2016-09-04 Thread Josh Luthman
I seriously doubt it :( Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Sep 4, 2016 8:34 PM, "Jonathan Taylor" wrote: > My AMO-2G13 wobles back and fourth at least an inch or two i can't > pull up on it any but i can

[Ubnt_users] Bad Omni???

2016-09-04 Thread Jonathan Taylor
My AMO-2G13 wobles back and fourth at least an inch or two i can't pull up on it any but i can push it side to side. Should it do this? I don't recall it doing that when i installed it. And yes the mount does not move... it is the radome section that moves. Normally i would look at air