Well I brought the power down to -60/61 to be nice! Also higher
modulation...
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Jan 12, 2018 at 1:55 PM, Kurt Fankhauser
wrote:
> sun must have melted the ice off, i
sun must have melted the ice off, i have had some links with ice that get
affected and some that didn't, very strange sometimes, just have high link
margins is about the only thing you can do.
On Fri, Jan 12, 2018 at 12:31 PM, Josh Luthman
wrote:
> Right on the
Right on the money. Back up to 61 now.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Jan 12, 2018 11:40 AM, "Josh Luthman"
wrote:
> Well I thought exactly that at first but I do have radomes and another
>
Well I thought exactly that at first but I do have radomes and another
north/south link that has 0 change.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Fri, Jan 12, 2018 at 11:39 AM, Kurt Fankhauser
wrote:
> If you
If you have a backhaul covered in ice i can almost guarantee that the ice
is causing your signal being down, seen this a couple winters ago on an
AF5X link with 2 foot dishes, your pretty much screwed until the ice melts
off..
On Fri, Jan 12, 2018 at 11:36 AM, Josh Luthman
Had a wind/storm and everything come through, wind picked up at 4am and
4:30-5 we went from 61 db to 70 and a bit later down to 80 db. Everything
is covered in ice. BH is 12.5 miles north/south.
Have another BH 12.5 miles north/south (in line with the af5x) with no
problems. Ruled out thermal
https://www.netonix.com/wisp-switch/ws-26-400-ac.html
We use these
Mitch
On 1/8/2018 3:20 PM, Joey Craig wrote:
We have purchased TP-Link T1600G-52PS switches in the past at the
customers request for powering UBNT cameras. We only installed the
cameras but the customer did alll of the
We have purchased TP-Link T1600G-52PS switches in the past at the customers
request for powering UBNT cameras. We only installed the cameras but the
customer did alll of the programming of the switch.
We just purchased the same switch and had Unifi G3 cameras already installed
at a different