Re: [Ubnt_users] Looking for a network consultant at WISPA

[Kurt Fankhauser]

Powercode or Sonar for billing. I am using Powercode and however i wish
they had IPv6 support!

On Wed, Mar 7, 2018 at 12:36 PM, James Wilson  wrote:

> Thanks Sam!
>
> On Mar 7, 2018 11:30 AM, "Sam Tetherow"  wrote:
>
>> I would spend some time at the UBNT booth talking to the UNMS/UCRM
>> folks.  Last time I checked they had severe limitations on the number of
>> devices that could be managed with the software (along the lines of 400).
>> I know we have pushed AirControl over the limit by quite a bit, but we
>> currently need 3 different AirControl servers to manage the radios.  We
>> pretty much only use it for firmware upgrades at this point since it can't
>> manage the entire network in a single instance.
>>
>> On 03/06/2018 08:21 AM, James Wilson wrote:
>>
>> We're a small WISP that has outgrown our network design competency so
>> we're looking for some design and configuration help.
>>
>> We're switching to Ubiquiti routers and are planning on using UNMS and
>> UCRM.
>>
>> I'd like to meet up with someone here at WISPA.
>>
>> Thanks!
>>
>> -James
>>
>> RidgeComms
>>
>>
>> ___
>> Ubnt_users mailing 
>> listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Looking for a network consultant at WISPA

[James Wilson]

Thanks Sam!

On Mar 7, 2018 11:30 AM, "Sam Tetherow"  wrote:

> I would spend some time at the UBNT booth talking to the UNMS/UCRM folks.
> Last time I checked they had severe limitations on the number of devices
> that could be managed with the software (along the lines of 400).  I know
> we have pushed AirControl over the limit by quite a bit, but we currently
> need 3 different AirControl servers to manage the radios.  We pretty much
> only use it for firmware upgrades at this point since it can't manage the
> entire network in a single instance.
>
> On 03/06/2018 08:21 AM, James Wilson wrote:
>
> We're a small WISP that has outgrown our network design competency so
> we're looking for some design and configuration help.
>
> We're switching to Ubiquiti routers and are planning on using UNMS and
> UCRM.
>
> I'd like to meet up with someone here at WISPA.
>
> Thanks!
>
> -James
>
> RidgeComms
>
>
> ___
> Ubnt_users mailing 
> listUbnt_users@wispa.orghttp://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Looking for a network consultant at WISPA

[Sam Tetherow]

I would spend some time at the UBNT booth talking to the UNMS/UCRM 
folks.  Last time I checked they had severe limitations on the number of 
devices that could be managed with the software (along the lines of 
400).  I know we have pushed AirControl over the limit by quite a bit, 
but we currently need 3 different AirControl servers to manage the 
radios.  We pretty much only use it for firmware upgrades at this point 
since it can't manage the entire network in a single instance.



On 03/06/2018 08:21 AM, James Wilson wrote:
We're a small WISP that has outgrown our network design competency so 
we're looking for some design and configuration help.


We're switching to Ubiquiti routers and are planning on using UNMS and 
UCRM.


I'd like to meet up with someone here at WISPA.

Thanks!

-James

RidgeComms


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Looking for a network consultant at WISPA

[James Wilson]

@Darin   Yes, I agree, so we're still manual with Quickbooks for now.

And even Intuit has problems occasionally that are difficult to get fixed.

UCRM is still beta of course and who knows how long it will be before we
would dare subject a customer to it.  It does sound as if some providers
are using it, but without even an operator manual I wouldn't switch to it.

Thanks!



On Mar 7, 2018 7:26 AM, "Darin Steffl" <darin.ste...@mnwifi.com> wrote:

James,

I don't suggest using UCRM for billing or anything. Use a legitimate, solid
platform like Azotel, Sonar, Powercode, VISP, etc. and your life will be
easier.

Never trust your billing platform to someone you can't call and talk to on
the phone. Recipe for disaster otherwise.

On Tue, Mar 6, 2018 at 10:26 PM, Mike Whelan <mike.whelan@airlinkinternet.
net> wrote:

> Dennis Burgess @ Link Techs is the best. We use regularly.
>
>
>
>
> Please excuse the short response, this email was sent via a mobile device.
>
>  Original message 
> From: RickG <rgunder...@gmail.com>
> Date: 3/6/18 10:21 PM (GMT-06:00)
> To: Ubiquiti Users Group <ubnt_users@wispa.org>
> Subject: Re: [Ubnt_users] Looking for a network consultant at WISPA
>
> +1
>
> On Tue, Mar 6, 2018 at 9:26 AM, alex phillips <highspeedl...@gmail.com>
> wrote:
>
>> I suggest you reach out to Dennis Burges at LinkTechs.  They will have a
>> booth in the show hall
>>
>> *Alex Phillips*
>> CEO and General Manager
>> RBNS.net
>> HighSpeedLink.net
>> *540-908-3993 <(540)%20908-3993>*
>> Member WISPA.org
>> #Rev18
>>
>>
>> On Tue, Mar 6, 2018 at 9:21 AM, James Wilson <ja...@ridgecomms.com>
>> wrote:
>>
>>> We're a small WISP that has outgrown our network design competency so
>>> we're looking for some design and configuration help.
>>>
>>> We're switching to Ubiquiti routers and are planning on using UNMS and
>>> UCRM.
>>>
>>> I'd like to meet up with someone here at WISPA.
>>>
>>> Thanks!
>>>
>>> -James
>>>
>>> RidgeComms
>>>
>>> ___
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>
>
> --
> -RickG
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>


-- 
Darin Steffl
Minnesota WiFi
www.mnwifi.com
507-634-WiFi
<http://www.facebook.com/minnesotawifi> Like us on Facebook
<http://www.facebook.com/minnesotawifi>

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Looking for a network consultant at WISPA

[Darin Steffl]

James,

I don't suggest using UCRM for billing or anything. Use a legitimate, solid
platform like Azotel, Sonar, Powercode, VISP, etc. and your life will be
easier.

Never trust your billing platform to someone you can't call and talk to on
the phone. Recipe for disaster otherwise.

On Tue, Mar 6, 2018 at 10:26 PM, Mike Whelan <
mike.whe...@airlinkinternet.net> wrote:

> Dennis Burgess @ Link Techs is the best. We use regularly.
>
>
>
>
> Please excuse the short response, this email was sent via a mobile device.
>
>  Original message 
> From: RickG <rgunder...@gmail.com>
> Date: 3/6/18 10:21 PM (GMT-06:00)
> To: Ubiquiti Users Group <ubnt_users@wispa.org>
> Subject: Re: [Ubnt_users] Looking for a network consultant at WISPA
>
> +1
>
> On Tue, Mar 6, 2018 at 9:26 AM, alex phillips <highspeedl...@gmail.com>
> wrote:
>
>> I suggest you reach out to Dennis Burges at LinkTechs.  They will have a
>> booth in the show hall
>>
>> *Alex Phillips*
>> CEO and General Manager
>> RBNS.net
>> HighSpeedLink.net
>> *540-908-3993 <(540)%20908-3993>*
>> Member WISPA.org
>> #Rev18
>>
>>
>> On Tue, Mar 6, 2018 at 9:21 AM, James Wilson <ja...@ridgecomms.com>
>> wrote:
>>
>>> We're a small WISP that has outgrown our network design competency so
>>> we're looking for some design and configuration help.
>>>
>>> We're switching to Ubiquiti routers and are planning on using UNMS and
>>> UCRM.
>>>
>>> I'd like to meet up with someone here at WISPA.
>>>
>>> Thanks!
>>>
>>> -James
>>>
>>> RidgeComms
>>>
>>> ___
>>> Ubnt_users mailing list
>>> Ubnt_users@wispa.org
>>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>>
>>>
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>
>
> --
> -RickG
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>


-- 
Darin Steffl
Minnesota WiFi
www.mnwifi.com
507-634-WiFi
<http://www.facebook.com/minnesotawifi> Like us on Facebook
<http://www.facebook.com/minnesotawifi>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Looking for a network consultant at WISPA

[Mike Whelan]

Dennis Burgess @ Link Techs is the best. We use regularly. 



Please excuse the short response, this email was sent via a mobile device.
 Original message From: RickG <rgunder...@gmail.com> Date: 
3/6/18  10:21 PM  (GMT-06:00) To: Ubiquiti Users Group <ubnt_users@wispa.org> 
Subject: Re: [Ubnt_users] Looking for a network consultant at WISPA 
+1
On Tue, Mar 6, 2018 at 9:26 AM, alex phillips <highspeedl...@gmail.com> wrote:
I suggest you reach out to Dennis Burges at LinkTechs.  They will have a booth 
in the show hall
Alex Phillips
CEO and General Manager
RBNS.net
HighSpeedLink.net540-908-3993Member WISPA.org#Rev18


On Tue, Mar 6, 2018 at 9:21 AM, James Wilson <ja...@ridgecomms.com> wrote:
We're a small WISP that has outgrown our network design competency so we're 
looking for some design and configuration help.
We're switching to Ubiquiti routers and are planning on using UNMS and UCRM. 
I'd like to meet up with someone here at WISPA.
Thanks! 
-James
RidgeComms 

___

Ubnt_users mailing list

Ubnt_users@wispa.org

http://lists.wispa.org/mailman/listinfo/ubnt_users





___

Ubnt_users mailing list

Ubnt_users@wispa.org

http://lists.wispa.org/mailman/listinfo/ubnt_users





-- 
-RickG

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Looking for a network consultant at WISPA

[RickG]

+1

On Tue, Mar 6, 2018 at 9:26 AM, alex phillips 
wrote:

> I suggest you reach out to Dennis Burges at LinkTechs.  They will have a
> booth in the show hall
>
> *Alex Phillips*
> CEO and General Manager
> RBNS.net
> HighSpeedLink.net
> *540-908-3993*
> Member WISPA.org
> #Rev18
>
>
> On Tue, Mar 6, 2018 at 9:21 AM, James Wilson  wrote:
>
>> We're a small WISP that has outgrown our network design competency so
>> we're looking for some design and configuration help.
>>
>> We're switching to Ubiquiti routers and are planning on using UNMS and
>> UCRM.
>>
>> I'd like to meet up with someone here at WISPA.
>>
>> Thanks!
>>
>> -James
>>
>> RidgeComms
>>
>> ___
>> Ubnt_users mailing list
>> Ubnt_users@wispa.org
>> http://lists.wispa.org/mailman/listinfo/ubnt_users
>>
>>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>


-- 
-RickG
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Looking for a network consultant at WISPA

[James Wilson]

Thanks Alex, I'll see if they are doing UBNT routers now.  -James

On Mar 6, 2018 8:26 AM, "alex phillips"  wrote:

I suggest you reach out to Dennis Burges at LinkTechs.  They will have a
booth in the show hall

*Alex Phillips*
CEO and General Manager
RBNS.net
HighSpeedLink.net
*540-908-3993 <(540)%20908-3993>*
Member WISPA.org
#Rev18


On Tue, Mar 6, 2018 at 9:21 AM, James Wilson  wrote:

> We're a small WISP that has outgrown our network design competency so
> we're looking for some design and configuration help.
>
> We're switching to Ubiquiti routers and are planning on using UNMS and
> UCRM.
>
> I'd like to meet up with someone here at WISPA.
>
> Thanks!
>
> -James
>
> RidgeComms
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Looking for a network consultant at WISPA

[alex phillips]

I suggest you reach out to Dennis Burges at LinkTechs.  They will have a
booth in the show hall

*Alex Phillips*
CEO and General Manager
RBNS.net
HighSpeedLink.net
*540-908-3993*
Member WISPA.org
#Rev18


On Tue, Mar 6, 2018 at 9:21 AM, James Wilson  wrote:

> We're a small WISP that has outgrown our network design competency so
> we're looking for some design and configuration help.
>
> We're switching to Ubiquiti routers and are planning on using UNMS and
> UCRM.
>
> I'd like to meet up with someone here at WISPA.
>
> Thanks!
>
> -James
>
> RidgeComms
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

[Ubnt_users] Looking for a network consultant at WISPA

[James Wilson]

We're a small WISP that has outgrown our network design competency so we're
looking for some design and configuration help.

We're switching to Ubiquiti routers and are planning on using UNMS and
UCRM.

I'd like to meet up with someone here at WISPA.

Thanks!

-James

RidgeComms
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users