Re: [Ubnt_users] Reboot problem when connecting to AP

2016-12-28 Thread Rory Conaway 
We didn’t have the luxury of changing out the Rocket 5M due to the lateness of 
the hour but it has been running for 3 years through various updates.  We ended 
up using the old as dirt NS5M Loco, XM chipset, turning that into an AP and 
turning the Rocket into the CPE.  If the Loco was the CPE, it rebooted also.  
We are going to go back and change them both out next time we are down there.

Rory

From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
Behalf Of Tyson
Sent: Wednesday, December 28, 2016 10:50 AM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] Reboot problem when connecting to AP

If its not hard replace the ap with another xm or a xw even.  Im really curious 
the outcome and hope you share end result.  We have had some issues with the xm 
to xw but nothing to this degree.  Wish you best of luck sounds frustrating.



Sent from my Verizon, Samsung Galaxy smartphone

 Original message 
From: Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net>>
Date: 12/28/16 11:34 AM (GMT-06:00)
To: Ubiquiti Users Group <ubnt_users@wispa.org<mailto:ubnt_users@wispa.org>>
Subject: Re: [Ubnt_users] Reboot problem when connecting to AP

Yea, it’s a weird one.

Rory

From: ubnt_users-boun...@wispa.org<mailto:ubnt_users-boun...@wispa.org> 
[mailto:ubnt_users-boun...@wispa.org] On Behalf Of RickG
Sent: Wednesday, December 28, 2016 9:56 AM
To: Ubiquiti Users Group <ubnt_users@wispa.org<mailto:ubnt_users@wispa.org>>
Subject: Re: [Ubnt_users] Reboot problem when connecting to AP

There does seem to be some incompatibility slight issues between the XM & XW 
radios. But not always?

On Wed, Dec 28, 2016 at 9:26 AM, Rory Conaway 
<r...@triadwireless.net<mailto:r...@triadwireless.net>> wrote:
Just 1.

Tried multiple versions of firmware across multiple radios.

The AP is an XM radio.  But we flipped the AP and the client so the AP was a WA 
on 3 of the 4 radios.

Same version was loaded on both sides, multiples.

The AP wasn't rebooting, just all the clients and no, watchdog was not enabled.

-Original Message-
From: ubnt_users-boun...@wispa.org<mailto:ubnt_users-boun...@wispa.org> 
[mailto:ubnt_users-boun...@wispa.org<mailto:ubnt_users-boun...@wispa.org>] On 
Behalf Of Stuart Pierce
Sent: Wednesday, December 28, 2016 3:57 AM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] Reboot problem when connecting to AP
How many cpe's on the ap?

Are you saying you tried 5.6.2 to 5.6.9 and a couple of betas on the AP?

Is the AP an XM version?

What firmware versions are on the CPE?

Don't suppose there is a ping watchdog on the AP.

On Tue, December 27, 2016 10:42 pm, Rory Conaway wrote:
> We tried 3 different PB400 nose cones, a NB19, and different versions
> of firmware from 5.6.2 to 5.6.9 and a couple of beta versions
> including v6.0 beta 15 and as soon as the client connects to the AP,
> the PB400's and NB19's reboot.  We have used different cables, power 
> supplies, etc...
> Putting on 6.0 right now but this is just weird.  We have also tried
> multiple IP addresses in case there was an IP conflict.   Any ideas are
> welcome.
>
> Rory Conaway * Triad Wireless * CEO
> 4226 S. 37th Street * Phoenix * AZ 85040
> 602-426-0542
> r...@triadwireless.net<mailto:r...@triadwireless.net><mailto:r...@triadwireless.net<mailto:r...@triadwireless.net>>
> www.triadwireless.net<http://www.triadwireless.net><http://www.triadwireless.net/>
>
>
> "I led the league in go get 'em next time." - Bob
> Uecker<http://www.baseball-almanac.com/players/player.php?p=ueckebo01>
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org>
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>


___
Ubnt_users mailing list
Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org>
http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org<mailto:Ubnt_users@wispa.org>
http://lists.wispa.org/mailman/listinfo/ubnt_users



--
-RickG KyWiFi
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Reboot problem when connecting to AP

2016-12-28 Thread Rory Conaway 
Just 1.

Tried multiple versions of firmware across multiple radios.

The AP is an XM radio.  But we flipped the AP and the client so the AP was a WA 
on 3 of the 4 radios.

Same version was loaded on both sides, multiples.

The AP wasn't rebooting, just all the clients and no, watchdog was not enabled.

-Original Message-
From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
Behalf Of Stuart Pierce
Sent: Wednesday, December 28, 2016 3:57 AM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] Reboot problem when connecting to AP

How many cpe's on the ap?

Are you saying you tried 5.6.2 to 5.6.9 and a couple of betas on the AP?

Is the AP an XM version?

What firmware versions are on the CPE?

Don't suppose there is a ping watchdog on the AP.

On Tue, December 27, 2016 10:42 pm, Rory Conaway wrote:
> We tried 3 different PB400 nose cones, a NB19, and different versions 
> of firmware from 5.6.2 to 5.6.9 and a couple of beta versions 
> including v6.0 beta 15 and as soon as the client connects to the AP, 
> the PB400's and NB19's reboot.  We have used different cables, power 
> supplies, etc...
> Putting on 6.0 right now but this is just weird.  We have also tried
> multiple IP addresses in case there was an IP conflict.   Any ideas are
> welcome.
>
> Rory Conaway * Triad Wireless * CEO
> 4226 S. 37th Street * Phoenix * AZ 85040
> 602-426-0542
> r...@triadwireless.net<mailto:r...@triadwireless.net>
> www.triadwireless.net<http://www.triadwireless.net/>
>
>
> "I led the league in go get 'em next time." - Bob 
> Uecker<http://www.baseball-almanac.com/players/player.php?p=ueckebo01>
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users
___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Reboot problem when connecting to AP

2016-12-28 Thread Stuart Pierce 
How many cpe's on the ap?

Are you saying you tried 5.6.2 to 5.6.9 and a couple of betas on the AP?

Is the AP an XM version?

What firmware versions are on the CPE?

Don't suppose there is a ping watchdog on the AP.

On Tue, December 27, 2016 10:42 pm, Rory Conaway wrote:
> We tried 3 different PB400 nose cones, a NB19, and different versions of
> firmware from 5.6.2 to 5.6.9 and a couple of beta versions including v6.0
> beta 15 and as soon as the client connects to the AP, the PB400's and
> NB19's reboot.  We have used different cables, power supplies, etc...
> Putting on 6.0 right now but this is just weird.  We have also tried
> multiple IP addresses in case there was an IP conflict.   Any ideas are
> welcome.
>
> Rory Conaway * Triad Wireless * CEO
> 4226 S. 37th Street * Phoenix * AZ 85040
> 602-426-0542
> r...@triadwireless.net
> www.triadwireless.net
>
>
> "I led the league in go get 'em next time." - Bob
> Uecker
>
>
> ___
> Ubnt_users mailing list
> Ubnt_users@wispa.org
> http://lists.wispa.org/mailman/listinfo/ubnt_users
>
>


___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Reboot problem when connecting to AP

2016-12-27 Thread Rory Conaway 
Here is one other funny thing.  We pointed one of the radios to a different AP. 
 Came right up, no reboot.

Rory

From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
Behalf Of Rory Conaway
Sent: Tuesday, December 27, 2016 10:33 PM
To: Ubiquiti Users Group
Subject: Re: [Ubnt_users] Reboot problem when connecting to AP

This AP, Rocket 5M only has 1 client attached.  We got to the point of just 
running premade jumpers, multiples of them, multiple PoE power supplies, and 
finally even a netonix.  The clients all rebooted.

Rory

From: ubnt_users-boun...@wispa.org<mailto:ubnt_users-boun...@wispa.org> 
[mailto:ubnt_users-boun...@wispa.org] On Behalf Of Tyson
Sent: Tuesday, December 27, 2016 10:01 PM
To: Ubiquiti Users Group <ubnt_users@wispa.org<mailto:ubnt_users@wispa.org>>
Subject: Re: [Ubnt_users] Reboot problem when connecting to AP

So multiple clients all reboot at the same time or just every different kind of 
ubnt gear you use at this particular location reboots when it associates.  
Either way...sounds like u have done a clean install at this location so 
should work unless the ap is the problem.  If its just one location off an Ap 
and you think the AP is good then even though you said you already have changed 
wires, poe, ect major stumpers like you are describing usually lead back to a 
wire in my exp or even possibly a poe.  Id double check the wire tho if its 
isolated to one location and tried a handful of different cpe's



Sent from my Verizon, Samsung Galaxy smartphone

 Original message 
From: Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net>>
Date: 12/27/16 9:42 PM (GMT-06:00)
To: Ubiquiti Users Group <ubnt_users@wispa.org<mailto:ubnt_users@wispa.org>>
Subject: [Ubnt_users] Reboot problem when connecting to AP

We tried 3 different PB400 nose cones, a NB19, and different versions of 
firmware from 5.6.2 to 5.6.9 and a couple of beta versions including v6.0 beta 
15 and as soon as the client connects to the AP, the PB400’s and NB19’s reboot. 
 We have used different cables, power supplies, etc… Putting on 6.0 right now 
but this is just weird.  We have also tried multiple IP addresses in case there 
was an IP conflict.   Any ideas are welcome.

Rory Conaway • Triad Wireless • CEO
4226 S. 37th Street • Phoenix • AZ 85040
602-426-0542
r...@triadwireless.net<mailto:r...@triadwireless.net>
www.triadwireless.net<http://www.triadwireless.net/>

"I led the league in go get 'em next time." - Bob 
Uecker<http://www.baseball-almanac.com/players/player.php?p=ueckebo01>

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Reboot problem when connecting to AP

2016-12-27 Thread Rory Conaway 
This AP, Rocket 5M only has 1 client attached.  We got to the point of just 
running premade jumpers, multiples of them, multiple PoE power supplies, and 
finally even a netonix.  The clients all rebooted.

Rory

From: ubnt_users-boun...@wispa.org [mailto:ubnt_users-boun...@wispa.org] On 
Behalf Of Tyson
Sent: Tuesday, December 27, 2016 10:01 PM
To: Ubiquiti Users Group <ubnt_users@wispa.org>
Subject: Re: [Ubnt_users] Reboot problem when connecting to AP

So multiple clients all reboot at the same time or just every different kind of 
ubnt gear you use at this particular location reboots when it associates.  
Either way...sounds like u have done a clean install at this location so 
should work unless the ap is the problem.  If its just one location off an Ap 
and you think the AP is good then even though you said you already have changed 
wires, poe, ect major stumpers like you are describing usually lead back to a 
wire in my exp or even possibly a poe.  Id double check the wire tho if its 
isolated to one location and tried a handful of different cpe's



Sent from my Verizon, Samsung Galaxy smartphone

 Original message 
From: Rory Conaway <r...@triadwireless.net<mailto:r...@triadwireless.net>>
Date: 12/27/16 9:42 PM (GMT-06:00)
To: Ubiquiti Users Group <ubnt_users@wispa.org<mailto:ubnt_users@wispa.org>>
Subject: [Ubnt_users] Reboot problem when connecting to AP

We tried 3 different PB400 nose cones, a NB19, and different versions of 
firmware from 5.6.2 to 5.6.9 and a couple of beta versions including v6.0 beta 
15 and as soon as the client connects to the AP, the PB400’s and NB19’s reboot. 
 We have used different cables, power supplies, etc… Putting on 6.0 right now 
but this is just weird.  We have also tried multiple IP addresses in case there 
was an IP conflict.   Any ideas are welcome.

Rory Conaway • Triad Wireless • CEO
4226 S. 37th Street • Phoenix • AZ 85040
602-426-0542
r...@triadwireless.net<mailto:r...@triadwireless.net>
www.triadwireless.net<http://www.triadwireless.net/>

"I led the league in go get 'em next time." - Bob 
Uecker<http://www.baseball-almanac.com/players/player.php?p=ueckebo01>

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users

Re: [Ubnt_users] Reboot problem when connecting to AP

2016-12-27 Thread Tyson 
So multiple clients all reboot at the same time or just every different kind of 
ubnt gear you use at this particular location reboots when it associates.  
Either way...sounds like u have done a clean install at this location so 
should work unless the ap is the problem.  If its just one location off an Ap 
and you think the AP is good then even though you said you already have changed 
wires, poe, ect major stumpers like you are describing usually lead back to a 
wire in my exp or even possibly a poe.  Id double check the wire tho if its 
isolated to one location and tried a handful of different cpe's


Sent from my Verizon, Samsung Galaxy smartphone
 Original message From: Rory Conaway  
Date: 12/27/16  9:42 PM  (GMT-06:00) To: Ubiquiti Users Group 
 Subject: [Ubnt_users] Reboot problem when connecting to 
AP 


We tried 3 different PB400 nose cones, a NB19, and different versions of 
firmware from 5.6.2 to 5.6.9 and a couple of beta versions including v6.0 beta 
15 and as soon as the client connects to the AP, the PB400’s and NB19’s reboot. 
 We
 have used different cables, power supplies, etc… Putting on 6.0 right now but 
this is just weird.  We have also tried multiple IP addresses in case there was 
an IP conflict.   Any ideas are welcome.
 
Rory Conaway
• Triad Wireless • CEO
4226 S. 37th Street • Phoenix • AZ 85040
602-426-0542
r...@triadwireless.net
www.triadwireless.net
 
"I led the league in go get 'em next time." -

Bob Uecker
 

___
Ubnt_users mailing list
Ubnt_users@wispa.org
http://lists.wispa.org/mailman/listinfo/ubnt_users