Suspend/resume does not work with the latest updated Lucid.
** Changed in: linux (Ubuntu)
Status: Incomplete => New
--
[Dell Computer Corporation Inspiron 600m] suspend/resume failure
https://bugs.launchpad.net/bugs/428961
You received this bug notification because you are a member of Ubu
Suspend/resume does not work with the latest updated Lucid.
** Changed in: linux (Ubuntu)
Status: Incomplete => New
--
[Dell Computer Corporation Inspiron 600m] late resume failure
https://bugs.launchpad.net/bugs/428963
You received this bug notification because you are a member of Ubuntu
I very much agree with iGEL in many ways. Korean fonts and input method
were far better in Jaunty than in Karmic.
I've had to do a lot of guessing just to get readable Korean fonts by
adjusting the default fonts in System>Preferences>Appearance and had to
adjust separately in Firefox's Preferences
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/38546912/Dependencies.txt
--
awn does no start
https://bugs.launchpad.net/bugs/514611
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
Binary package hint: avant-window-navigator
Avant window navigator does not start (its not visible, but I can see the
process running in system monitor). I get the following message when i run from
the terminal.
(avant-window-navigator:3381): GConf-CRITICAL **: gconf_value_
sorry, this one is complete
r...@rik-desktop:~$ lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 04b8:012a Seiko Epson Corp. Perf
this is what I get
r...@rik-desktop:~$ lsusb
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 04b8:012a Seiko Epson Corp. Perfection 49
I'm not having a whole lot of luck reproducing this (with previous
kernel, haven't tried the new one yet), except at install time. This
completely seems to prevent me from installing to usb, but despite
several attempts at mounting, reading, and writing to ext4+usb (the same
one I was having troub
Public bug reported:
Binary package hint: virt-manager
In 10.04, at least, when adding a device, the second half of lsusb's output is
interpreted as decimal, when it is in fact hexidecimal.
As a result, to make a USB passthrough device work, I had to edit the XML file
from 0x1d0b (which virt-ma
** Changed in: pidgin
Status: New => Fix Released
--
"OK" and "Cancel" buttons in "drag & drop image" dialog can't be translated
https://bugs.launchpad.net/bugs/312181
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bug
This bug is a duplicated of https://bugs.launchpad.net/bugs/504375,
which was reported on Jan07.
--
Apps crash in QHashData::free_helper on shutdown
https://bugs.launchpad.net/bugs/512169
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
-
*** This bug is a duplicate of bug 512169 ***
https://bugs.launchpad.net/bugs/512169
Someone has this ALL reversed . Bug#512169 is a duplicated of this one.
Bug#512169 was reported almost 3 weeks later. WTF?!
--
Kubuntu 10.4 Segmentation Fault on Logoff,Restart,Shutdown
https://bugs.launchpa
** Description changed:
Binary package hint: gcc-4.4
gcc-4.4 cross build for m68k on i486 fails due to:
"checking for suffix of object files... configure: error: in
`/home/eric/src/m68k-cross-compiler/gcc-4.4-4.4.1/build/m68k-linux-gnu/m68040/libgcc':
configure: error: cannot comput
On Sat, 30 Jan 2010 03:47:05 -
"Cody A.W. Somerville" wrote:
> Its highly probably this issue is already resolved in later versions
> of reprepro and/or libdb (reprepro checkpool certainly works for me).
> Would it be possible for you to test this with reprepro and libdb
> from a newer versio
** Attachment added: ".home.me..cache.ubuntuone.log.oauth.login.log.txt"
http://launchpadlibrarian.net/38546544/.home.me..cache.ubuntuone.log.oauth.login.log.txt
** Attachment added:
".home.me..cache.ubuntuone.log.syncdaemon.exceptions.log.txt"
http://launchpadlibrarian.net/38546545/.hom
Public bug reported:
Binary package hint: ubuntuone-client
i have had to add my computer to u1 website 4 or 5 times and it still
will not stay connected
ProblemType: Bug
.home.me..config.ubuntuone.syncdaemon.conf:
[bandwidth_throttling]
read_limit = 2097152
write_limit = 4194304
on = True
.h
** Changed in: tangerine (Debian)
Status: New => Fix Released
--
Incorrect homepage link
https://bugs.launchpad.net/bugs/381494
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.
Same type of messages within /var/log/syslog for a Levovo R61i with a
network attached HP Color LaserJet Printer cp1518ni. Printing works but
log contains similar warnings:
-begin of messages
Jan 29 22:31:10 moerder udev-configure-printer: invalid or missing IEEE 1284
Device ID
Jan 29 22:31:1
Its highly probably this issue is already resolved in later versions of
reprepro and/or libdb (reprepro checkpool certainly works for me). Would
it be possible for you to test this with reprepro and libdb from a newer
version of Ubuntu?
--
segfaults running checkpool
https://bugs.launchpad.net/bu
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/38546378/Dependencies.txt
--
Text in column A is of an indeterminate type. Does not act like text or number.
https://bugs.launchpad.net/bugs/514606
You received this bug notification because you are a member of Ubuntu
Bugs,
Public bug reported:
Binary package hint: openoffice.org
Text in column A has it's source from a web document. Although REPLACE
will treat it as text, VALUE will not and gives a 502 error.
Error found in OpenOffice 3.1 Calc
ProblemType: Bug
Architecture: i386
DistroRelease: Ubuntu 9.04
Package:
I have the same problem with my ubuntu, the problem occurs randomly,
sometimes after several minutes and sometimes after some days.
the computer is:
- Lenovo R500 with Ati Radeon 3470 ( using the properiety driver of ati )
- connected to a wireless-n router via the internal 5100agn network control
I can also confirm that David Valentine's fix in post #10 works. Much
appreciated.
--
MythTV - Video Manager - Enter IMDB # screen
https://bugs.launchpad.net/bugs/339880
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mai
This bug still exists in Thunderbird Version 2.0.0.23 (20090817) that
ships with Ubuntu 10.04 Alpha 2.
--
Thunderbird cannot print to PDF
https://bugs.launchpad.net/bugs/332472
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-b
The package does install & run, though it takes manual installation. I
wanted python-qt3 for icecc (not in repos, but an old .deb available).
icecc is now closer to functioning.
--
python-qt3 depends on python-sip4 <= 4.9.1 but Lucid repo holds 4.9.3
https://bugs.launchpad.net/bugs/498012
You re
Public bug reported:
i downloaded a fresh copy of 9.10 today and installed on my desktop,
it says i am connected to my network and i can ping ubuntu.com but when
i open up firefox i cannot load any webpages and when i try to check for
upgrades to ubuntu packages it times out.
im not sure which p
Public bug reported:
If I choose to shutdown my system from the menu the first operation that
takes place is all of my applications are closed. It seems more like
first I should be prompted for my password and once I succeed in
authenticating myself it then closes my X session.
When I cancel out
Since this requirement is a wishlist one I will confirm your report and
marked as ready to be triaged. Thanks in advance
** Also affects: gwibber
Importance: Undecided
Status: New
** Changed in: gwibber (Ubuntu)
Importance: Undecided => Wishlist
** Changed in: gwibber (Ubuntu)
** Changed in: ubuntuone-client (Ubuntu)
Status: New => Invalid
** Converted to question:
https://answers.launchpad.net/ubuntu/+source/ubuntuone-client/+question/99190
--
Can't log in
https://bugs.launchpad.net/bugs/514568
You received this bug notification because you are a member of
Did the background change, also? If so, you will need to log out and
select "Xubuntu-session" from the gdm log in screen. After logging back
in, you should have the ability to right-click the menu. Otherwise, we
will see what the developers can do.
--
[Lucid Xubuntu] Applications menu unresponsiv
Public bug reported:
[needs-packaging] java-player
A Java client for the Player/Stage robot platform.
Javaclient allows development of applications for Player/Stage using the
elegancy and power of the Java programming language.
URL: http://java-player.sourceforge.net/
License: GNU General Publ
I seem to have this problem as well. After a few days, my installation of
Kubuntu 9.10 become extremely slow, the kickoff launcher is missing all entries
and compositing is disabled due to slow response. I just checked system monitor
and found that system memory is fully utilized and the greates
All,
Mark, Dustin and I have discussed some ideas around the notion that
having a more 'automated' method of choosing and allocating public IP
addresses in the UEC, while keeping Eucalyptus in MANAGED mode in order
to support all of the networking features that Eucalyptus provides
(Elastic IPs, Se
Here is the pdf produced by cups pdf. Can u see the difference?
** Attachment added: "junk1 using cups-pdf.pdf"
http://launchpadlibrarian.net/38545749/junk1%20using%20cups-pdf.pdf
--
cups pdf omits certain specific text characters while making pdfs
https://bugs.launchpad.net/bugs/514600
You
** Attachment added: "this is the pdf produced by Open Office. The one by cups
pdf follows"
http://launchpadlibrarian.net/38545724/junk1%20using%20direct%20export%20facility%20of%20OO.pdf
--
cups pdf omits certain specific text characters while making pdfs
https://bugs.launchpad.net/bugs/5
Public bug reported:
Binary package hint: cups-pdf
I use Open Office and SCIM input method to prepare large documents in Telugu
language (India).
Even as OO offered direct export of such files to pdf, the method did not fare
well with the (USLegal) paper size we adopt.
Consequently we prepare
Requested at the bug entry page:
r...@rc410l800m:~# lsb_release -rd
Description:Ubuntu 9.10
Release:9.10
r...@rc410l800m:~#
r...@rc410l800m:~#
r...@rc410l800m:~#
r...@rc410l800m:~#
r...@rc410l800m:~# apt-cache policy grub
grub:
Installed: (none)
Candidate: 0.97-29ubuntu59
Ver
** Attachment added: "AptOrdering.txt"
http://launchpadlibrarian.net/38545418/AptOrdering.txt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/38545419/Dependencies.txt
** Attachment added: "Dmesg.txt"
http://launchpadlibrarian.net/38545420/Dmesg.txt
** Attachment
Public bug reported:
Binary package hint: grub2
I installed Ubuntu Netbook Remix 9.10 onto an EliteGroup motherboard
model RC410L/800M (from about 2005 or so), which uses an ATI north/south
solution.
System, as built, is 64 bit capable (unicore Celeron D; beta versions of
64 Studio ran well on i
** Attachment added: "first attempt at backtrace"
http://launchpadlibrarian.net/38545523/gdb.txt-1
--
segfaults running checkpool
https://bugs.launchpad.net/bugs/514599
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
** Attachment added: "gdb.txt"
http://launchpadlibrarian.net/38545520/gdb.txt
--
segfaults running checkpool
https://bugs.launchpad.net/bugs/514599
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-b
Public bug reported:
Binary package hint: reprepro
r...@sandbox:/srv# lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:Ubuntu 8.04.3 LTS
Release:8.04
Codename: hardy
r...@sandbox:/srv# apt-cache policy reprepro
reprepro:
Installed: 3.3.2-1
Can
fwiw the first report (Description: Ubuntu 9.10 Release: 9.10) is off the new
netbook.
the other two are laptop installs
--
can not define monthly view for calendar
https://bugs.launchpad.net/bugs/511786
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscri
Cyclops, is this patch ever going to be included in tsclient? Is there
anything that can be done to push this simple patch through?
--
tsclient applet list is not sorted
https://bugs.launchpad.net/bugs/109291
You received this bug notification because you are a member of Ubuntu
Bugs, which is su
and since I'm into this now
here's my fedora installation info
Evolution 2.24.5
more /etc/fedora-release
Fedora release 10 (Cambridge)
and the attached list of rpm ... it does the exact same thing. I can
define/declare a new monthly view .. but when I hit EDIT nothing
happens.
The reason I am
I can confirm that squirrelmail appears to be working from karmic-
proposed.
** Changed in: squirrelmail (Ubuntu Hardy)
Status: Confirmed => Fix Committed
--
Multiple cross-site request forgery (CSRF) vulnerabilities in SquirrelMail
1.4.19 and earlier
https://bugs.launchpad.net/bugs/4468
Same problem with Creative ZEN Vision:M.
--
Ubuntu 9.10 Rhythmbox will not play mp3 files stored on my Samsung MTP device
https://bugs.launchpad.net/bugs/483050
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Debdiff looks good, building now. Thanks!
** Changed in: wxwidgets2.6 (Ubuntu)
Status: In Progress => Confirmed
--
Integer overflow in the wxImage::Create function
https://bugs.launchpad.net/bugs/467981
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Changed in: debian-installer (Ubuntu)
Status: New => Triaged
--
list-devices doesn't work if there are no dmraid devices
https://bugs.launchpad.net/bugs/514595
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mai
** Patch added: "Patch to prevent dmraid returning non-zero from killing
list-devices"
http://launchpadlibrarian.net/38545045/list-devices.patch
** Also affects: debian-installer (Ubuntu)
Importance: Undecided
Status: New
--
list-devices doesn't work if there are no dmraid devices
Public bug reported:
list-devices now calls dmraid to detect dmraid disks and partitions. If
no dmraid devices are present, dmraid exits non-zero, causing list-
devices to exit because it is set -e. Adding an || true to the dmraid
command fixes this. Patch attached.
** Affects: debian-installe
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/38545111/Dependencies.txt
** Attachment added: "XsessionErrors.txt"
http://launchpadlibrarian.net/38545112/XsessionErrors.txt
--
Gnometris begins launch but fails before the window appears.
https://bugs.launchpad.net/bu
Public bug reported:
Binary package hint: gnome-games
I have played Gnometris on 9.10 distributions on this same MacBook
before. I recently installed Ubuntu 9.10 32 bit, and have installed all
of the updates along with some other software from the Software center,
and the Mozilla build of Thunde
** Changed in: gpstrans (Debian)
Status: New => Fix Released
--
gpstrans ftbfs in lucid
https://bugs.launchpad.net/bugs/509719
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.c
All,
I'm unable to reproduce this problem with (pre) Eucalyptus 1.6.2; with a
running active CC in MANAGED mode (which has the masq rule in place), I
can telnet to localhost port 22 (for example) without a problem, and
sshing to localhost shows that I'm logged in from 'localhost' (implying
that th
Public bug reported:
Binary package hint: brasero
When you burn a disc in DVD video, and video has subtitle with the same
name (example: movie.avi and movie.srt), it is expected that the Brasero
(similar to totem when playing the video) merge the subtitle with the
video in the compilation. But th
** Attachment added: "disabled-apply-wpa.png"
http://launchpadlibrarian.net/38544895/disabled-apply-wpa.png
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/38544897/Dependencies.txt
** Attachment added: "Gconf.txt"
http://launchpadlibrarian.net/38544898/Gconf.txt
Public bug reported:
When trying to create a new Ad-Hoc network using WPA2 security, the
Apply button stays disabled even after putting a password in. I am
pretty sure this is the only thing stopping the network from being
created, as changing the security option to None re-enables the Apply
butt
** Attachment added: "Dependencies.txt"
http://launchpadlibrarian.net/38545029/Dependencies.txt
** Attachment added: "ProcMaps.txt"
http://launchpadlibrarian.net/38545030/ProcMaps.txt
** Attachment added: "ProcStatus.txt"
http://launchpadlibrarian.net/38545032/ProcStatus.txt
--
Scrabb
Public bug reported:
This is the first time I used "Totem Movie Player 2.28.2, Movie Player
using GStreamer 0.10.25". I had to obtain some add-ins and later load in
two Ubuntu files. The Player plays MP3 files from my hard drive fine
now, but when a play a commerically bought DVD (North American)
excuse me being stunned ... I reported this problem .. because I
realized this is why I did not use evolution on my prev ubuntu
installation prev one is Evolution 2.22.2
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=8.04
DISTRIB_CODENAME=hardy
DISTRIB_DESCRIPTION="Ubuntu 8.04"
** Attachment added: "dpkg -
woops. sorry.
** Attachment added: "dri_debug-20100129.tgz"
http://launchpadlibrarian.net/38544767/dri_debug-20100129.tgz
--
[GM45] system locks up at random intervals, except mouse
https://bugs.launchpad.net/bugs/469820
You received this bug notification because you are a member
This is really on the (we do our best to keep it)short-list of steps
that one currently needs to perform in order to migrate images (to and
from). Remember that images which are configured to run on xen will
almost surely need some minor modifications (...kernel modules?) in
order to boot properly
interesting. the freeze looked like the ones i have been having except
when testing keys (i check the numlock or caps to check for keyboard
activity) the screen went black and the mouse turned to a wheel for a
second. i then checked for virtual terminals in which i could access all
of them. there w
To clarify, this bug will be fixed when bug 203158 is fixed, so that
report is the one with the action.
--
Nexuiz crash - unknown cause
https://bugs.launchpad.net/bugs/498031
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bug
Since there's been no reply to this, I'm going to set to "Invalid" as
that problem was pretty much solved.
If this issue is still happening after installing the libsdl1.2debian-
pulseaudio package, then feel free to reopen the bug.
** Changed in: nexuiz (Ubuntu)
Status: New => Invalid
--
I can't install Java on Lucid.
--
Possible race in debconf socket forwarding
https://bugs.launchpad.net/bugs/455861
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.u
right click does not react either
--
[Lucid Xubuntu] Applications menu unresponsive.
https://bugs.launchpad.net/bugs/514575
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https:/
Same here an Kubuntu 10.04 x86
KNetworkManager: v0.9
network-manager 0.8 RC2
only chance to reconnect is
"rmmod iwl3945"
"modprobe iwl3945"
or restart
"service network-manager restart"
don't work
With a USB-WLAN Stick (other driver) i can reconnect and there are no
connectioninterrups, so its n
Please kill gnome-power-manager (killall gnome-power-manager) and then
run "gnome-power-manager --verbose" in a terminal. Then perform the
steps required to reproduce your bug. Then take the output and upload it
here.
This sounds rather similar to Bug #425411, though. It would be nice if
you could
All,
Chris has added a bash completion config for euca_conf as of revno 1138;
take a look!
--
euca_conf is missing command-line completion
https://bugs.launchpad.net/bugs/458203
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu
** Changed in: ec2-init (Ubuntu)
Status: New => Triaged
** Changed in: ec2-init (Ubuntu)
Importance: Undecided => Low
--
hostname modifications user are overwritten by ec2init
https://bugs.launchpad.net/bugs/514492
You received this bug notification because you are a member of Ubuntu
B
This turns out to be a bit deeper of an issue than anticipated; we're
using parted to create a partition/filesystem during image conversion
time for KVM. parted currently does not support the creation of an ext3
partition using mkpartfs (and, since the partition is in the middle of
the disk image,
I see that this report is marked as "Incomplete". Can someone please
advise what is needed for it to at least get attention, whatever the
priority?
- Checking through all the suggestions, it is NOT a duplicate -- not timeout,
not false positive, not a bug relating to fglrx (using fglrx is a worka
Some more context: if the eucalyptus DNS feature is disabled (as it is
in the UEC, by default), then we cannot guarantee that the IP addresses
that are specified by the administrator resolve to an actual hostname
(as, often, users are choosing private/unroutable IP addresses for VMs).
Inventing a h
I have a similar problem with both VBox 3.1.2 and 3.1.4 beta when
booting a VM with the 2.6.32 kernel. With VT-x off, when I try to boot a
32 bit Karmic guest running a 2.6.32.7 kernel (PAE enabled), it freezes
partway into the boot process. The last message is " * could not access
PID file for nmb
whoa ... you mean you can actually edit a monthly view ??
--
can not define monthly view for calendar
https://bugs.launchpad.net/bugs/511786
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.u
@kganesan: You should probably file a new bug if you still have problems
with the ubuntu software store. I actually see crashes of software store
in current lucid live cd but this might not be related to the bug here,
or is it?
--
Crashes on a missing syslog daemon
https://bugs.launchpad.net/bugs
I have erase all packets ttf-mscorefonts from HDD (/apt/info/)
and reinstall and all fine ;)
--
package ttf-mscorefonts-installer 3.0 failed to install/upgrade
https://bugs.launchpad.net/bugs/464422
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscrib
** Patch added: "updated diff.gz"
http://launchpadlibrarian.net/38544155/ucommon_2.0.8-0ubuntu1.diff.gz
--
Please update ucommon to 2.0.8
https://bugs.launchpad.net/bugs/514194
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubun
My apologies in advance if I'm violating any protocols - I'm a bit of a
newbie on Linux, but a long-time geek. I may have some info that is
useful. If not - you may disregard.
I've been running Ubuntu on my server since version 6. I switched to
Ubuntu on all my 3 desktop systems last fall and u
** Patch added: "Updated debdiff"
http://launchpadlibrarian.net/38544113/ucommon.diff
--
Please update ucommon to 2.0.8
https://bugs.launchpad.net/bugs/514194
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing li
** Attachment added: ".home.sriram..cache.ubuntuone.log.oauth.login.log.txt"
http://launchpadlibrarian.net/38544051/.home.sriram..cache.ubuntuone.log.oauth.login.log.txt
** Attachment added:
".home.sriram..cache.ubuntuone.log.syncdaemon.exceptions.log.txt"
http://launchpadlibrarian.net/3
Public bug reported:
Binary package hint: ubuntuone-client
Description:Ubuntu 9.10
Release:9.10
ProblemType: Bug
.home.sriram..config.ubuntuone.syncdaemon.conf:
[bandwidth_throttling]
on = False
read_limit = 0
write_limit = 0
.home.sriram..config.ubuntuone.ubuntuone.client.conf:
I actually like the new behaviour better, the old behaviour annoyed me
because I often need to work with two active connections to different
networks.
--
brings up both wired and wireless interfaces; hard to pick just one through the
UI
https://bugs.launchpad.net/bugs/262152
You received this bu
** Description changed:
Binary package hint: gcc-4.4
gcc-4.4 cross build for m68k on i486 fails due to:
"checking for suffix of object files... configure: error: in
`/home/eric/src/m68k-cross-compiler/gcc-4.4-4.4.1/build/m68k-linux-gnu/m68040/libgcc':
configure: error: cannot comput
I can confirm that the patch posted by Alex Murray fixes the issue for
me.
--
Speakers not muted when headphones inserted (Macbook 5.1, late 2008)
https://bugs.launchpad.net/bugs/480796
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Apt already does this. The Gnome packagekit frontend does this too.
** Changed in: apt (Ubuntu)
Status: New => Invalid
--
[Karmic] Needs to display size of each bug fix
https://bugs.launchpad.net/bugs/413202
You received this bug notification because you are a member of Ubuntu
Bugs, whic
I would say not all the other items are about firefox, either.
Clicking on "Help -> Report a Problem" wants me to report a bug using
apport, which will report it to launchpad.
Clicking on "Help -> Get online help" sends me to another Ubuntu page,
https://launchpad.net /ubuntu/karmic/+s
*** This bug is a duplicate of bug 335496 ***
https://bugs.launchpad.net/bugs/335496
I can confirm this. The menu entry labels should be much lighter. See
what they look like in nautilus for comparison.
** Changed in: firefox-3.5 (Ubuntu)
Status: New => Confirmed
** This bug has been
** Visibility changed to: Private
--
Cannot boot up my computer has got worse after two updates.
https://bugs.launchpad.net/bugs/509697
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.
** Tags added: needs-artwork
--
software-store needs clearer/simpler icon
https://bugs.launchpad.net/bugs/432552
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubun
I've just made updated versions of hardy available. They've got a fix
for the ec2-init bug selecting us-east-1 mirrors when running in us-
west-1. That was the only real issue not fixable by a update.
The karmic images were available last week. So, marking this "fixed" .
I do hope to get to a re
This is being broken by gconf-schemas, and affects any schema entry with
an empty short_desc attribute. Taking
/schema/desktop/gnome/peripherals/keyboard/repeat as an example here,
it's schema originally (pre-trimmed) looks like this:
When gconf-schemas is invoked to register
Confirmed on Lucid. This is a result of changes made. An easy way to get
the menu to work again is to right-click the menu, left-click
properties, click "Use custom menu file:". It should have a selection
for 'xfce-applications.menu'.
Thanks for reporting this issue. It is being marked triaged for
This bug was fixed in the package acpid - 1.0.10-5ubuntu2
---
acpid (1.0.10-5ubuntu2) lucid; urgency=low
* Source /usr/share/acpi-support/power-funcs in powerbtn.sh (LP: #508073)
-- Jonathan ThomasFri, 15 Jan 2010 19:59:47 -0500
** Changed in: acpid (Ubuntu)
Status: Tri
** Attachment added: "config.log"
http://launchpadlibrarian.net/38543858/config.log
--
gcc-4.4 cross build for m68k on i486 fails
https://bugs.launchpad.net/bugs/514579
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
** Attachment added: "lspci.txt"
http://launchpadlibrarian.net/38543864/lspci.txt
--
gcc-4.4 cross build for m68k on i486 fails
https://bugs.launchpad.net/bugs/514579
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs ma
** Attachment added: "specs"
http://launchpadlibrarian.net/38543861/specs
--
gcc-4.4 cross build for m68k on i486 fails
https://bugs.launchpad.net/bugs/514579
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing li
** Attachment added: "gcc-4.4-build.log"
http://launchpadlibrarian.net/38543840/gcc-4.4-build.log
--
gcc-4.4 cross build for m68k on i486 fails
https://bugs.launchpad.net/bugs/514579
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
101 - 200 of 1900 matches
Mail list logo
