Tried some recent mainline kernels again. No luck with 5.13.19, but
5.14.13 is using both displays just fine. (Earlier I had tried 5.14.3
with no luck.)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Still happens on 21.10's 5.13.16-051316-generic with a fairly new HP
Pavilion 15. The workaround from Arch doesn't quite help -- internal
monitor did work after that but external display is not detected.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
The user experience leaves a lot to be desired. At extensions.gnome.org
it shows as an extension which can be disabled and has updates. When I
turn it off, it doesn't turn off, and when I try to update it, it says I
can't update it because it is not turned off. Other extensions don't
work that
Although I had planned to leave my laptop on LTS, eventually bluetooth
issues convinced me to move to 18.10. It works much better with the
newer kernel.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Yes, it continues.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1726061
Title:
Inspiron 5565 suspend issues after 17.10 upgrade
To manage notifications about this bug go to:
I first had to resume from suspending this morning. I ran journalctl -b
before and after attempting to suspend again with the lid open. The
attachment includes the lines added in between.
** Attachment added: "journalctl_output"
Perhaps this is no longer a kernel issue or at least no longer a
regression. I am getting the same behavior with 4.14 and 4.13.11 and
even the kernel from 17.04 . Normally when I am suspending at the end of
the day I first close the laptop lid, then choose suspend from the menu
on the external
Upon initially booting either 4.13.11 or 4.14.0 I see 1 in active_count for
ACAD, and zeros elsewhere. When 4.14.0 has immediately resumed from suspend and
shows additional events from the lid and the power button, I have not touched
either of those in the course of attempting to suspend.
** Attachment added: "wakeup_sources_4.14.0"
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1726061/+attachment/5008223/+files/wakeup_sources_4.14.0
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
But that bisection may be leading toward a dead end or at least a moot
point. The behavior which I am calling "bad" there is different from
what I am currently seeing in later RCs and in 4.14.0.
In, for example, my last "bad" commit 126f760ca94, upon suspend the
machine does actually suspend but
Still a few rounds of bisect remaining but this is where I am now:
# bad: [126f760ca94dae77425695f9f9238b731de86e32] rds: Fix incorrect statistics
counting
git bisect bad 126f760ca94dae77425695f9f9238b731de86e32
# good: [98e93e968e4947cd71c2eb69e323682daa453ee7] mac80211: Complete ampdu
work
Would be nice to disable sticky edges and/or the barrier while dragging
a window.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1726464
Title:
Can't easily move the cursor between monitors when the
To summarize my earlier comments: All the below relates to
suspend/resume of 17.10.
Suspend/resume works fine if I boot with the 4.10-based Ubuntu kernel
from 17.04, or any 4.13 mainline kernel starting from 4.13.5 .
The mainline kernels from 4.13 through 4.13.4, upon which the Ubuntu
kernel is
Tested with newest mainline kernels. 4.3.11 still works fine. 4.14.rc7
still fails to come out of suspend.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1726061
Title:
Inspiron 5565 suspend issues
sorry, meant to say 4.13.11, not 4.3.11
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1726061
Title:
Inspiron 5565 suspend issues after 17.10 upgrade
To manage notifications about this bug go to:
Tested a couple more kernels and it seems that the issue I have with
4.13.4 is not present in mainline 4.13.5, nor in 4.13.9. Resume worked
fine.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1726061
4.14-rc6 is even worse -- I can't wake the machine after suspend at all,
except by rebooting with long-press of the power button.
I tested other mainline kernels too. All 4.13-based mainline kernels I
tested behave similar to the shipped Ubuntu kernel, from 4.13.4 down
back to 4.13rc1.
** Summary changed:
- Inspiron 5536 suspend issues after 17.10 upgrade
+ Inspiron 5565 suspend issues after 17.10 upgrade
** Description changed:
- On my Inspiron 5536, 17.10 seems to work fairly well, unless I try to
+ On my Inspiron 5565, 17.10 seems to work fairly well, unless I try to
Public bug reported:
On my Inspiron 5536, 17.10 seems to work fairly well, unless I try to
suspend. Suspend shuts off the display but doesn't seem to actually shut
off the CPU -- fans still run. When I move the mouse the display comes
back on but upon entering my password sometimes the session
Anything in particular holding the release of this fix for Zesty?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1519331
Title:
Postfix cannot resolve DNS if network was unavailable when it was
Users switching from Unity to GNOME... or from almost any other
environment to GNOME... are going to find the current panel arrangement
inconvenient. I am not used to moving the mouse all the way to the far
edge of the other monitor when I want to log out, or suspend, or adjust
volume... and I
pulseaudio was working fine for me in system mode until this update hit
my machine today. Now I have no sound.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1573296
Title:
obsolete conffiles not
Unfortunately not everyone has access to a new version of the client.
Would be nice if kernel compatibility with previous versions could be
restored.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Looks good.
$ uname -a
Linux cookie 4.4.0-40-generic #60-Ubuntu SMP Fri Sep 23 16:45:45 UTC 2016
x86_64 x86_64 x86_64 GNU/Linux
** Tags removed: verification-needed-xenial
** Tags added: verification-done-xenial
--
You received this bug notification because you are a member of Ubuntu
Bugs,
Tim Gardner, thanks for building that. Downloaded your build, installed
it, and rebooted. Both monitors work fine. Anything else I should check?
$ uname -a
Linux cookie 4.4.0-38-generic #57 SMP Tue Sep 6 12:47:10 UTC 2016 x86_64 x86_64
x86_64 GNU/Linux
[Sorry I didn't notice until now --
What would it take to apply this single commit to the stable kernel for
xenial?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1600092
Title:
radeon: monitor connected to onboard VGA doesn't work
Never mind: if I am reading correctly it seems those commits I mentioned
in #10 are already included upstream and in Ubuntu as well.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1562219
Title:
Public bug reported:
[In comments on 1579481 I mentioned that I had found and cherry-picked a
fix from upstream. I was asked to file another bug so that my hardware
information could be compared. apport will show kernel version 4.4.0-24
but the issue is reproducible on 4.4.0-28 as well-- just
As I mentioned on 1579481: The commit below (also from upstream) fixes
this for me. Hadn't noticed the one mentioned above... I only cherry-
picked this one on top of current xenial git source. Would be nice to
see this commit find its way into official Xenial kernels.
Confirmed: typing this on my second screen, connected via VGA, after
cherry-picking the commit I linked to in #28. Without that commit the
second screen was recognized but remained dark while connected to the
VGA port of my Kaveri-based desktop. Same monitor had been fine when
connected via DVI.
Two relevant-looking Fedora patches which I haven't tried yet:
http://pkgs.fedoraproject.org/cgit/rpms/xorg-x11-server.git/commit/?h=f22=943ff7334233f04fc2311945822cac537673a493
http://pkgs.fedoraproject.org/cgit/rpms/xorg-x11-server.git/commit/?h=f22=9d0fee062d4fbc0bee08db4fb8461c3d7f9ee0f5
If we identify which commit from upstream fixed the issue, would it make
sense to release an update for Xenial?
Suspect it is this one but haven't tried to build yet:
https://github.com/torvalds/linux/commit/c8213a638f65bf487c10593c216525952cca3690
--
You received this bug notification because
Searching for applications was way too slow for me until I tried the suggestion
here:
https://bugs.launchpad.net/ubuntu/+source/unity-lens-files/+bug/919801/comments/26
The difference is like night and day. Does it help for you too?
--
You received this bug notification because you are a
#26 seems to have made a huge difference for me on 15.10. Perhaps there
should be some built-in regular maintenance for that database.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/919801
Title:
** Description changed:
I can read my mail with roundcube but if I try to reply to a message,
- the send button doesn't seem to do anything.
+ the send button doesn't seem to do anything. Also, when replying to HTML
+ messages, HTML source is shown in the editor instead of rendered HTML.
Public bug reported:
I can read my mail with roundcube but if I try to reply to a message,
the send button doesn't seem to do anything.
In the JS console I see a 404 error for (my
url)/program/js/tinymce/tinymce.min.js .
Seems this is the same as Debian bug 784351 which is said to be fixed in
Public bug reported:
I built 3.19.0-18 from master-next (commit ccb645c) and my Dell 1545
boots, but X doesn't run. I was able to SSH to the machine and find this
in dmesg output:
[ 18.128077] [ cut here ]
[ 18.128117] kernel BUG at
The only thing I can think of is that we run pulseaudio in system mode,
so that MPD can be running regardless of who may or may not be logged in
on console.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
Ubuntu 13.10 x64
When nobody is logged in on console, but pulseaudio and mpd are running,
indicator-sound uses 50-70% of CPU. This is bad for power consumption
and also bad for background jobs running in a vnc4server session.
from top:
15215 lightdm 20 0 363m 4452
@crosser: Good to see a fix... but can it be fixed for the version in
Saucy? If I understand correctly, installing Cinnamon 2 from the PPA
breaks Unity... which is not acceptable for multi-user systems.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
With the recent kernel update this started working for me. Looks like it
is using the packaged firmware, not the updated one, which might mean
the updated one is not needed for this device.
$ uname -a
Linux kermit 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013
x86_64 x86_64 x86_64
+tgrundle does that patch from #9 work for you? It's not working for me.
I built per your instructions-- thanks for spelling it out like that.
Now I see in dmesg that it is loading the new firmware, but then it
repeatedly gets either authenticating with ... timed out or, when it
does manage to
@Rebecca Palmer, thanks for trying... but I had already added the
download source, and successfully installed the ADT. Only problem is
that none of the ADT toolbar buttons show up... for example the button
to launch an emulator.
--
You received this bug notification because you are a member of
None of those actions are in the Window menu. If I push the Run button,
I am given a choice of running as a Java application or Java applet,
but not Android application.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
I have been using the ADT plugins with eclipse from universe in 12.04
and earlier releases. After upgrading to 12.10, ADT no longer works. I
tried deleting my ~/.eclipse directory and reinstalling ADT; I also
tried installing ADT as root, as suggested in one Ask Ubuntu
Thanks for clarifying. I saw 3.0.0-15.24 in -pre-proposed but I didn't
realize it included 3.0.13. I installed it and it works.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/855199
Title:
irqfixup
I installed the mainline kernel. Unfortunately I couldn't boot into X so
I can't verify the fix. I have an nvidia card in that machine and dkms
failed to build the nvidia-current driver for the mainline 3.0.13
kernel, complaining it could not identify the kernel version.
--
You received this bug
Installed 3.0.0-14.23 from proposed but it doesn't seem to have helped.
Mouse and keyboard are still choppy.
ii linux-image-3.0.0-14-generic-pae 3.0.0-14.23
$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-3.0.0-14-generic-pae
root=UUID=a1d758b2-1b9b-43a1-96e8-6ec585d96742 ro quiet
Perhaps my previous note oversimplified matters. I noted this message in
.xsession-errors after failed login:
compiz (unityshell) - Error: GL_ARB_vertex_buffer_object not supported
But unity_support_test when run later does show GL vertex buffer
object as I noted above. It seems that something
Booting back into natty (a different root partition on the same machine)
the glxinfo call from ~/.gnomerc does report the extension present.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/876879
I too have a Dell laptop upgraded from 11.04. Not sure if the behavior I
am seeing is related though. In 11.04, Unity was working fairly well. In
11.10 it does not start at login-- instead I get a Nautilus menu. If I
switch to a virtual terminal and run unity --replace and then switch
back to X,
Following the instructions here--
http://ubuntuforums.org/showpost.php?p=11346157postcount=2 --gets me
roughly into the same situation as OP: 2D sessions work, 3D sessions
don't. But I can still manually launch unity --replace from a virtual
terminal, and it works.
I use local users. User name is aaron and d-feet shows RealName as
Aaron Peromsik. uid of this user is 600.
dpkg -l accountsservice says
ii accountsservic 0.6.14-1git1 query and manipulate user account informatio
--
You received this bug notification because you are a member of Ubuntu
Bugs
Might be useful to throw in some hibernate/resume test cases. I
installed 3.8.16 on my Inspiron 1545. Based on my impressions so far I
am afraid I will probably be bumping back down to 3.8.10 in the near
future.
I have from time to time had the screen remain completely black on
resume. I can
A dozen brief hibernate/resume exercises later, I have the distinct
impression that the only problematic case is hibernating with the
external display connected and then trying to resume without it. Perhaps
that is specific enough to want its own bug report?
--
You received this bug notification
On my Inspiron 1545, hibernate / resume work much better in Natty--
better than Maverick, and probably also better than Lucid. Resume from
hibernate in particular is much faster and smoother than it has ever
been. Time required to hibernate is also quite reasonable. Maverick
would fail to
@Tony Espy, thanks for posting that workaround, downgrading worked for
me too on my Dell 1545.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/753971
Title:
Display garbled upon restoring original
My 1545 had this problem with 2.6.35-22. It got much better with updates
23 and 24, but it's still not perfect. Now it *usually* hibernates, but
hibernating takes longer than it used to with Lucid, and sometimes it
still hangs during hibernation.
--
You received this bug notification because you
Forum user claims to have found a workaround.
http://ubuntuforums.org/showpost.php?p=10135213postcount=8
I have not confirmed, but if true that should help someone identify
where the bug is and maybe fix it.
--
Microsoft Office LiveMeeting hangs with tiny window
Problem persists with latest 6.22 update.
--
Microsoft Office LiveMeeting hangs with tiny window
https://bugs.launchpad.net/bugs/589524
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Tried another machine with nvidia graphics and the issue is not
reproducible there.
--
ssvnc hangs X server while toggling FullScreen
https://bugs.launchpad.net/bugs/662430
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Still a problem in Maverick. As in previous releases it seems to be a
problem only when Visual Effects are turned on. I have been leaving them
off for a couple years or so as a workaround for this issue.
Unfortunately Maverick has another issue for which there is a workaround
of turning visual
Hmm... looks like both issues also affect ssvncviewer, which binds
FullScreen toggle to F9.
--
No Shift+Click in xvnc4viewer
https://bugs.launchpad.net/bugs/275089
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing
Public bug reported:
Binary package hint: ssvnc
Description:Ubuntu 10.10
Release:10.10
After opening a VNC session, FullScreen status can be toggled either via the F8
popup menu, or through a dedicated F9 key binding. Using the F8 popup menu
seems to work fine. Using F9
Booted my Karmic install to confirm that it still works. It does, but I
misremembered the java version in that install... it's actually 6-06.
sun-java6-plugin:
Installed: 6-06-0ubuntu1
Candidate: 6-06-0ubuntu1
Version table:
*** 6-06-0ubuntu1 0
100 /var/lib/dpkg/status
--
as a workaround, downgraded my Lucid install to 6-15 from Karmic
multiverse.
sun-java6-plugin:
Installed: 6-15-1
Candidate: 6.20dlj-1ubuntu3
Version table:
6.20dlj-1ubuntu3 0
500 http://archive.canonical.com/ubuntu/ lucid/partner Packages
*** 6-15-1 0
100
Public bug reported:
I used to use Microsoft Office LiveMeeting Web client without problems
in Karmic and before that. In Karmic I was using sun-java5-plugin but
that is no longer available in Lucid, so now I use sun-java6-plugin.
Luckily they have a test page... Browsing to
MarkG,
Just grab the 10.04 apt-cacher from packages.ubuntu.com and install it
on the 9.10 server. At least it worked fine for me.
-- Aaron
--
apt-cacher doesn't know about Translation-[lang].bz2 files
https://bugs.launchpad.net/bugs/83987
You received this bug notification because you are a
@C.F. Howlett: I am almost afraid to say this in case I am falling into
the same trap as #57... but I have an Inspiron 1545 and Grub has not
been harmed roughly since the day I uninstalled McAfee Security Center.
--
grub fails after running Windows
https://bugs.launchpad.net/bugs/441941
You
For me this seems to have been solved a week or two ago, probably by
recent kernel updates.
--
[Karmic] USB hotplug system doesn't detect anything after boot
https://bugs.launchpad.net/bugs/425755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
My first impression when reading #17 was that it shouldn't be necessary
to use system mode for PulseAudio to get mpd to work right. In Jaunty I
had it working as desired without changing /etc/default/pulseaudio. The
mpd wiki page referenced above seems to say that mpd can launch
pulseaudio itself
I have been going around renumbering my user id's on my home machines,
which all had real users' numbers starting from 600 due to switching
from Mandriva back in the Dapper time frame. The old gdm used to respect
the setting in /etc/gnome-system-tools/users/profiles . It would be nice
if the new
Sorry, looks like that comment should have gone to bug 459199 instead...
except that the comments there already cover it.
--
login screen is showing user below 1000
https://bugs.launchpad.net/bugs/427462
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Merged the latest Debian changes and they do seem to fix the problem. I
am relatively new at the PPA thing, but I did upload a karmic package to
my PPA (https://launchpad.net/~aperomsik/+archive/aap-ppa/+packages) in
case it will help someone. Although the package was built against karmic
I
Might be worth an update for Jaunty. When attempting to do a dist-
upgrade on a client whose sources.list references an apt-cacher server
without this fix, the dist-upgrade refuses to run due to the errors
received from apt-cacher. I have so far been using the workaround of
running LANG=C sudo
Same here; still occurs on 9.04.
--
Screensave activates during play in lincity-NG
https://bugs.launchpad.net/bugs/248342
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I'm a bit confused about the GPL-symbol kernel thing. ndiswrapper has
been working fine for me on Hardy since I followed the directions here:
https://help.ubuntu.com/community/WifiDocs/Driver/bcm43xx/Feisty_No-
Fluff#head-cbc75fcb762da2057fa8dbe904358e4b611353c0
Why is it working, if the
I have the same thing after upgrading to Hardy on my M6805. As I resume
I get loud beeps. Then when the screen comes back, I get the screen
saver login prompt, and when I unlock the screen I get a popup in the
notification area saying hibernation failed. But hibernation actually
seems to work
I think the use of the visor module with gnome-pilot may be deprecated.
I don't remember where I saw it, but try changing the device to usb:
instead of /dev/anything ... that worked for me on a Tungsten C. (I
don't know if it will still work if you've already done modprobe
visor.)
--
sync on
I have the same problem in Feisty on a machine with an old Rage128 card.
Other GL screensavers work fine after adding GLCore to modules in
xorg.conf, and molecule works fine on another machine.
--
Screensaver locks up when using molecules
https://bugs.launchpad.net/bugs/117482
You received this
All my vnc4server problems went away when I patched the vnc4server
script as below (after reading the comments above). It would be nice if
someone would make this change in the package itself...
$ diff -uw vnc4server~ vnc4server
--- vnc4server~ 2007-01-07 12:30:09.0 -0500
+++ vnc4server
Public bug reported:
Binary package hint: guikachu
I installed guikachu on Feisty and tried to open a file I had created in
an older release (of both Ubuntu and guikachu). A dialog box said
Unable to save (filename): Unrecognized format application/xml. I
created a new file in guikachu, saved it
Works better after running
sudo update-mime-database /usr/share/mime
as long as the files are named *.guikachu, which is not enforced by the
program but such is life.
So it seems like a packaging bug. The MIME info is put in two files in
/usr/share/mime which don't seem to match the other files
Guido, did you switch from 32-bit to 64-bit for Feisty? On my m6805, any
32-bit distro I have tried has not had this bug, but any 64-bit version
does. Currently using 32-bit Edgy, partly to avoid this issue.
--
LCD Brightness on Laptop Always Set Very Low at Boot
Kees, are you saying that this fix won't go out until a fix for 78282 is
found? Comment 17 on that bug makes it sound like they are one and the
same.
--
vnc4server uses wrong font path
https://launchpad.net/bugs/3593
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Peter, thanks for your response. The edgy kernel is still on my machine
and still listed in grub, so I booted it... I wasn't sure what you meant
by ensure you have a valid swap partition, so I asked Google and found
bug 66637. Before following the instructions there I checked /etc
It still works, but I'm finding myself confused about the cause. Just
wanted to mention that I did not upgrade from dapper to edgy on the same
partition... it was a fresh install on a partition that used to contain
a different distribution which I used before dapper. (Yes, edgy's
installer
Seems to be a kernel issue. This a
href=http://www.ubuntuforums.org/archive/index.php/t-298903.html;thread/a
suggested trying a new kernel, so I built the dev kernel for edgy, and
now I can hibernate and resume just fine. Of course nothing is that
simple: with the new kernel, ndiswrapper doesn't
Just to repeat my comments from one of the duplicate bugs, using prevu
from the Ubuntu Backports project it was almost straightforward to build
the new Feisty package for Edgy, and the resulting package does indeed
fix the problem with landscape pdfs.
--
Evince print dialog doesn't respect page
*** This bug is a duplicate of bug 67164 ***
prevu is a tool from the Ubuntu Backports project
(backports.ubuntuforums.org). It's a fairly thin wrapper around
pbuilder. In building packages for edgy (for my own use) I was mostly
following guidelines from this thread:
Seems to be fixed by evince 0.70, which I backported from feisty using
prevu. I wonder if it might be worth an official update. Only thing is I
also had to backport gnome-icon-theme... but I haven't noticed any bad
effects from this.
** Summary changed:
- evince does'nt print correctly
+ evince
Public bug reported:
Binary package hint: vbetool
The fact that hibernate worked perfectly in dapper on my eMachines m6805
was one of the factors that convinced me to move to Ubuntu.
Unfortunately since I moved to edgy hibernate no longer works. The
graphics chip is ATI Mobility Radeon 9600. I'm
I have come up with a way to reproduce this crash. It seems to be
triggered by some GNOME functionality which may or may not be supported
in Ubuntu but is configured by Mandriva by default. (We switched
recently and mostly kept our home directories intact.)
Mandriva configures a bunch of file
It was already installed when I got the last backtrace.
[EMAIL PROTECTED]:~$ dpkg -l | grep dbg
ii libglib2.0-0-dbg 2.10.3-0ubuntu1The GLib
libraries and debugging symbols
ii libgnomevfs2-0-dbg 2.14.2-0ubuntu1GNOME virtual
file-system
I don't believe we are using any bookmarks.
--
User-specific: Gnome file dialogs crash every time
https://launchpad.net/bugs/58962
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Got some debug info installed, though not quite enough. The dbg package
for libgtk-2.0 doesn't seem to include some of the module subdirectories
so I can't see what's going on in libgnome-vfs.so. Traceback with
partial symbols below.
What I can see is that we seem to be crashing while trying to
Public bug reported:
On one of my home machines this crash affects my wife's account but not
mine. Any application which uses GNOME file dialogs will crash when she
accesses a file dialog -- open or save. Observed with gnome, gaim, gimp,
openoffice.org. Workaround for the last one is to use OOO's
Looks like I left out some machine information: the machine is using the
i386 install (Pentium III 866MHz coppermine). Graphics card is an old
nvidia card, not using the proprietary driver at the moment. The exact
card probably doesn't matter because the crash reproduces in a VNC
session as long
98 matches
Mail list logo
