Same problem with gedit-latex-plugin 3.4.0-1 under Precise 12.04, but
only as a regular user. When runing gedit as root, the plugin seems to
work fine.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
*** This bug is a duplicate of bug 845321 ***
https://bugs.launchpad.net/bugs/845321
** This bug has been marked a duplicate of bug 845321
Unable to setup Ubuntu One sync with Tomboy
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Works for me too on a Dell Studio 1749.
Steps:
1. Create new file /etc/modprobe.d/blacklist-suspend.conf with the
following two lines:
blacklist firewire_core
blacklist firewire_ohci
2. Run: sudo update-initramfs -u
3. Reboot and check that the modules were not loaded by running: lsmod |
grep
@Pedro: Yes, in Natty one cannot save in-line images. Version:
2.32.2-0ubuntu7.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/663261
Title:
Evolution does not allow me to save inline images
To
*** This bug is a duplicate of bug 739251 ***
https://bugs.launchpad.net/bugs/739251
** This bug has been marked a duplicate of bug 739251
support identi.ca accounts logged in via OpenID
* You can subscribe to bug 739251 by following this link:
I've switched the Status back to New since in Karmic, the *04.bst files
are still not in the texmf tree:
$ ls /usr/share/texmf-texlive/bibtex/bst/aguplus
agu.bst agufull.bst
But over on CTAN there are two corresponding *04.bst files:
http://www.ctan.org/tex-archive/macros/latex/contrib/aguplus/
This camera works in Karmic. Yeah! Therefore I'm switching the Status
to Fix Released.
** Changed in: spca5xx (Ubuntu)
Status: Incomplete = Fix Released
--
CIF problem with new spca5xx/gspcav1 and Logitech Quickcam Chat
https://bugs.launchpad.net/bugs/119132
You received this bug
as you did, the the files are here: http://www.ctan.org/tex-
archive/fonts/urw/garamond/
the license may (or may not) be the problem with packaging them up.
ctan lists the license as: Noncommercial: free for private use but
commercial use not permitted
a README note somewhere would help.
--
perhaps getnonfreefonts-sys -all should be run or the option of running
it should be presented when the fonts-extra package is installed.
--
URW-Garamond math fonts not installed
https://bugs.launchpad.net/bugs/245873
You received this bug notification because you are a member of Ubuntu
Bugs,
Yes, it is still reproducible in 8.10.
The package in 8.10 is texlive-publishers (2007.dfsg.2-1ubuntu1). The
description says:
This package contains the following CTAN packages:
...
aguplus -- Styles for American Geophysical Union.
...
The texlive-publishers package provides these files
All of the /dev/hdXY names will have been changed to /dev/sdXY. The
upgrade did not modify my mdadm.conf file for me and may not have
modified yours either.
--
RAID initialisation fails on boot with 2.6.24-16
https://bugs.launchpad.net/bugs/228782
You received this bug notification because you
FYI:
I've upgraded from 6.06 to 8.04 (that's dapper to hardy) and had this
problem.
I had the same fsck error as reported above. At the maintenance shell
mount -a mounted all the parititions and them CTRL+D would continue to
boot.
In short, my /dev/sda1 is /boot. The fstab was updated with
Public bug reported:
Binary package hint: texlive-lang-indic
The description for texlive-lang-indic says, malayalam -- Fonts for
typesetting Malayalam, with a pre-processor.
Does this mean that the pre-processor is required? If so, is it
included in the package?
The malayalam package and help
Public bug reported:
Binary package hint: texlive-publishers
In 2004, the agu bst files were updated. The Gutsy package texlive-
publishers 2007-3 still has the old agu files. The new bst files and
documentation are here:
ftp://ftp.agu.org/journals/latex/journals/for_BiBTeX/
Can the new bst
I've contacted Patrick Daly to ask if he will upload the most recent
versions of his files to CTAN. The files currently on CTAN (as of right
now) are the old files. When I hear back from him, or if someone else
has to uploda them, I will update this feature request.
Thank you,
jason.
--
An alternative to Félix Velasco's suggestion
(https://bugs.launchpad.net/ubuntu/+source/hugin/+bug/81255/comments/2):
Instead of removing the .exe in the preferences, the full path to autopanog.exe
could be added:
/usr/lib/autopano-sift/autopanog.exe
I don't which is a better solution, but do
Public bug reported:
The version of achemso is in texlive-latex-extra 2005.dfsg.3-1 is
1998-07-08. There are updates from 2007: http://www.ctan.org/tex-
archive/macros/latex/contrib/achemso/
Can the latest version of achemso gets dropped into an updated texlive-
latex-extra? Thanks.
** Affects:
Public bug reported:
As per: https://bugs.launchpad.net/ubuntu/+source/spca5xx/+bug/70532
With the version of gspcav1 that ships with 7.04 (Fesity Fawn) I can no
longer get CIF video from my Logitech Quickcam Chat (usb ID 046d:092e).
Only QCIF works. The gconf key to switch in Ekiga is
Jérôme,
With 7.04 (Fesity Fawn) the correct module is now loaded. See output
from /var/log/syslog:
Jun 6 09:50:22 tiffin kernel: [ 2548.526505] usb 1-1: new full speed USB
device using uhci_hcd and address 2
Jun 6 09:50:22 tiffin kernel: [ 2548.723113] usb 1-1: configuration #1 chosen
from 1
This sound similar to the problem I've had. If I accidentally kill X by
CTRL+ALT+Backspace when I log back into gnome beagled always has
crashed. Usually these accidental X killings are because I hit the wrong
key when entering some unicode text.
** Attachment added: _usr_bin_beagled.1000.crash
** Attachment added: lscpi-vvn-JasonVenkiteswaran-CompaqPresario2100
http://librarian.launchpad.net/6495058/lscpi-vvn-JasonVenkiteswaran-CompaqPresario2100.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs
** Attachment added: lscpi-vv-JasonVenkiteswaran-CompaqPresario2100
http://librarian.launchpad.net/6495057/lscpi-vv-JasonVenkiteswaran-CompaqPresario2100.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs
This problem still affects Feisty Fawn Herd 2.
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
http://bugzilla.gnome.org/show_bug.cgi?id=398014
--
evo asks for password on startup
https://launchpad.net/bugs/68255
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I don't use empty passwords either: evolution handles two accounts and
pops up windows for both.
--
evo asks for password on startup
https://launchpad.net/bugs/68255
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
This is essentially the same problem I describe here (#70532):
https://launchpad.net/distros/ubuntu/+source/spca5xx/+bug/70532
--
Logitech usb webcam QuickCam Express Plus not recognised while driver spca5xx
is available
https://launchpad.net/bugs/49758
--
ubuntu-bugs mailing list
I would like to confirm this on Edgy (evolution 2.8.1-0ubuntu4). When I
start evolution, windows confirming saved passwords come up as per David
Prieto's original description. Evolution works at creating the mail
folders and displays in the background and no data is transfered over
the
This bug (49758) is similar:
https://launchpad.net/distros/ubuntu/+source/spca5xx/+bug/49758
--
Newer Logitech Quickcams not properly detected
https://launchpad.net/bugs/70532
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Public bug reported:
I have a (usb ID 046d:092e) Logitech Quickcam Chat that does not get
picked up by the current spca5xx driver.
See here for more details:
http://ubuntuforums.org/showthread.php?t=205782
This thread involves the 046d:092e and 046d:092f cameras.
The new gscpav1 driver works
Allow me to reconfirm on an older Compaq Presario 2100:
Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
$ sudo modprobe -r orinoco_pci
$ sudo modprobe -r hostap_pci
$ sudo modprobe -r prism2_pci
$ sudo modprobe orinoco_pci
Works like a charm after this in edgy. The
to follow up from MHouse at 2006-05-25 22:12:49 UTC
using a stock dapper (6.06) with all updates and network-manager
(0.6.2-0ubuntu7) i too continue to have a problem with hidden a ssid.
i can connect to the ssid via the cli:
sudo iwconfig eth1 essid xxx
but if i enter the ssid name into
Re: Pascal Vincent at 2006-09-24 19:25:36 UTC
this work for my DLink DWL520E1 pci card and this also works well for my
Linksys WPC11 ver.3 pcmcia card too.
--
[dapper regression] hostap driver no longer properly blacklists orinoco
https://launchpad.net/bugs/41652
--
ubuntu-bugs mailing list
i've had a similar problem with an upgrade from 5.10 to 6.06 (breezy to
dapper).
the orinoco module is getting loaded before the hostap modules. this,
in turn, loads the orinoco_pci and hermes modules. as a result when
hostap comes around and tries to load the firmware into my DLinkDWL520E1
pci
33 matches
Mail list logo
