This is currently an issue in 19.10's systemd (version 242). By default,
unless services are configured to set LimitMEMLOCK, they will have 64k
as their memlock limit (though oddly, systemd bumped its own memlock
limit higher than previous versions have used). The only processes not
affected are th
Also confirming this fixes the issue on the Power8 LPAR that was failing
with the previous version of stress-ng.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1851316
Title:
Failures of stack stress
Thanks Sam! I'll pass that along and have them test these to ensure it
works.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1851446
Title:
Backport MPLS patches from 5.3 to 4.15
To manage notifica
Gianfranco Costamagna (costamagnagianfranco) wrote on 2019-10-23: please
purge the old eoan kernel.
Can you go into a little more detail about the best way to purge the old eoan
kernel?
Also, is there a way to prevent this problem as opposed to dealing with it
after the fact?
--
You received t
Public bug reported:
Mellanox is requesting a backport of the following commit IDs from 5.3
back to 4.15.
Netdevice HW MPLS features are not passed from device driver's netdevice to
upper netdevice, specifically VLAN and bonding netdevice which are created
by the kernel when needed.
This prevent
Public bug reported:
Description:Ubuntu 16.04.6 LTS
Release:16.04
update-manager:
Installed: 1:16.04.16
Candidate: 1:16.04.16
I noticed lately that changelogs were not downloading for any Ubuntu packages
in update-manager.
Running from terminal I saw this error:
File "/usr/li
Note, this was a problem on the 4.15 GA kernel as well. It's entirely
reasonable that this is something on that USB controller going bad,
however, none of the options I can find to disable that port work
either.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which
Public bug reported:
For a while now (several kernels back starting with 4.15, IIRC) syslog
and dmesg have been flooded with these and similar messages:
[914961.613273] usb 3-3: Failed to suspend device, error -71
[914961.613483] usb 3-3: Failed to suspend device, error -71
[914964.741387] usb 3-
Public bug reported:
I tried to change my monospace font to "Noto Sans Mono Bold" in
/etc/fonts/local.conf but that didn't have an effect so I did a little digging.
First I ran
$ sudo fc-cache -f -v && sudo dpkg-reconfigure fontconfig fontconfig-config
Which succeeded, then:
$ fc-list :style=
Public bug reported:
According to --help:
-m, --massive-debug Print a lot of debug information to the command
line
Now, perhaps my understanding of the words "massive" and "debug" are
flawed, but the output I get while trying to debug failure to add a PPA
is neither massive, nor really debug
Hi Derek,
I'm not totally up to speed on the Multi-Arch thing. Is this just changing
a field in the control file? What's the benefit? Any downside?
I saw a similar bug on Debian's bugtracker, that didn't make sense to me.
Happy to be educated.
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=9
This is done.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1816304
Title:
Several issues due to version 4 beta while the final 4.0.0 has been
released
To manage notifications about this bug go t
Tesseract is updated - so done.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1777388
Title:
Openalpr segfault in libtesseract provided in Bionic
To manage notifications about this bug go to:
https
This is done.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1802334
Title:
update tesseract-ocr to 4.0.0 stable
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+sour
On Ubuntu 18.04 with noexec on /tmp running 'apt-get install -y selinux'
and then doing a required reboot will give you a non-booting host.
As an aside, the same security guidance (CIS Benchmarks for one) about
noexec on /tmp should be applied to /var/tmp, so changing
APT::ExtractTemplates::TempDi
https://ezix.org/project/wiki the source is there, however, there are
several JSON related bugs, some of which seem to be the same as this,
but have been open for several years without update.
We may need to fix this ourselves.
** Also affects: plainbox-provider-checkbox
Importance: Undecided
** Changed in: lshw (Ubuntu)
Status: New => Confirmed
** Changed in: lshw (Ubuntu)
Importance: Undecided => High
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1843063
Title:
lshw -json ou
[4299]: ScanOnAccess: preventing access
attempts on malicious files.
Sep 4 12:19:21 ub18test clamd[4299]: ScanOnAccess: Max file size limited to
104857600 bytes
Sep 4 12:19:21 ub18test clamd[4299]: ScanOnAccess: Protecting directory
'/home' (and all sub-directories)
Regards,
Jeff Blain
This old bug report should get closed. ClamAV now offers "OnAccess"
real-time prevention (see the ClamAV docs).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to the bug report.
https://bugs.launchpad.net/bugs/565036
Title:
For a real-time pr
Public bug reported:
'actionban' for xarf-attack-login fails with error:
2019-09-01 16:34:29,549 fail2ban.utils [29558]: Level 39 7fb558007060
-- exec: oifs=${IFS}; IFS=.;SEP_IP=( 192.168.1.151 ); set -- ${SEP_IP}; ADDRESS
ES=$(dig +short -t txt -q $4.$3.$2.$1.abuse-contacts.abusix.org)
Public bug reported:
0b05:17cb ASUSTek Computer, Inc. Broadcom BCM20702A0 Bluetooth
I have a USB Bluetooth dongle from ASUS based on the fairly common
Broadcom BCM20702A0 chipset.
I can pair bluetooth audio device to this and have tried a JabraSpeak
510 Bluetooth Speaker/Mic and a Plantronics Vo
Moved to correct project
** Project changed: umkl => linux (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1839166
Title:
Bios is not setting CPU cores to maximum frequency
To manage notifi
Public bug reported:
In ubuntu 19.04 with emacs 26.1, typing "M-x auctex" is not a valid
command. This is reproducible even starting as "emacs -q". I've also
tried evaluating (load "auctex"), which returns true, but the command
"auctex" remains unavailable.
The variable AUCTeX-version has value
Wow, just found this bug.
I am one of the upstream Open MPI developers; we just had this exact
issue reported to us, and I reported it in
https://bugs.launchpad.net/ubuntu/+source/openmpi/+bug/1838684. I guess
I'll go mark that one as a duplicate of this one.
The fix for this issue is very, very
*** This bug is a duplicate of bug 1731938 ***
https://bugs.launchpad.net/bugs/1731938
This bug is a dup of an almost 2-year old bug:
https://bugs.launchpad.net/ubuntu/+source/openmpi/+bug/1731938.
Ubuntu package maintainer: please fix this issue. It's very easy to
fix.
** This bug has been
I forgot to link to the upstream bug where this was initially reported:
https://github.com/open-mpi/ompi/pull/4501
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1838684
Title:
Open MPI 2.1.1 sample
It looks like the issue is because the Ubuntu package is compiled with
`--enable-heterogeneous` (this is not a default option). Specifically:
if I compile Open MPI 2.1.1 with `--enable-heterogeneous`, I am able to
replicate the issue.
It further looks like we elected not to fix this issue upstrea
Public bug reported:
As reported at the upstream Open MPI users list (https://www.mail-
archive.com/us...@lists.open-mpi.org/msg33383.html), the Open MPI v2.1.1
bundled in Ubuntu 18.04.x seems to have a problem. I am one of the
upstream Open MPI developers, so I am filing this issue here.
When t
I believe this bug affects me as well.
I see this:
jeff@starshine:~ $ apt-cache policy ubuntu-release-upgrader-gtk
ubuntu-release-upgrader-gtk:
Installed: 1:18.04.34
Candidate: 1:18.04.34
Version table:
*** 1:18.04.34 500
500 http://es.archive.ubuntu.com/ubuntu bionic-updates/main
And, just to be complete:
jeff@starshine:~ $ sudo apt-get update && sudo apt-get upgrade -y && sudo
apt-get autoremove -y && sudo apt-get dist-upgrade -y && sudo apt-get
autoremove -y
Hit:1 http://security.ubuntu.com/ubuntu bionic-security InRelease
Hit:2 htt
Bug is still present.
Ubuntu 18.04 desktop, upgrade from 16.04.5
Logitech M310, connected using Logitech Unify USB dongle.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1296872
Title:
Charge level a
Private bug reported:
I've been trying to run the server certification tools on a server with
DPCMM devices that are configured as: 15% MemoryMode, 85% AppDirect
mode.
I've configured a fsdax, devdax, sector and raw devices on the DCPMMs.
fsdax, devdax and sector are all mountable, formatted etc
** Changed in: plainbox-provider-certification-server
Status: Confirmed => Fix Committed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1819994
Title:
cloud-init selects sysconfig netconfig re
Just a heads up, the fix is now in -updates, I've tested this locally on
a couple deployments and it seems to resolve the issue we had before.
Asking my team to verify on a couple more deployments for due diligence.
--
You received this bug notification because you are a member of Ubuntu
Bugs, wh
I agree, it took me a long time to figure out the meanings of the
buttons as well. I would have found it easier to understand if there
was a red X for the muted state and picture of sound waves for unmuted
state, like the top two in this image here:
https://stock.adobe.com/images/sound-volume-cont
Public bug reported:
iwyu tries to include stddef.h, fails, and emits a fatal error. But
compiling the same file succeeds.
jeff@birdsong:tmp $ cat foo.cc
#include
std::string hello;
jeff@birdsong:tmp $ iwyu -v -std=c++14 foo.cc
clang version 5.0.1-2 (tags/RELEASE_501/final)
Target: x86_64-pc
This may be related to the following upstream bugs:
https://github.com/include-what-you-use/include-what-you-use/issues/270
https://github.com/include-what-you-use/include-what-you-use/issues/679
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed t
Also, yes, I get that this is a nit-pick and that there's a history
there, this is more a wishlist thing because it's a usability issue.
** Changed in: systemd (Ubuntu)
Importance: Undecided => Wishlist
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is su
Public bug reported:
-h is a fairly common shortcut for --help.
reboot, however, reboots the machine when one issues the command:
reboot -h
Now looking at the man page, there is an entry for --halt and --help,
but NOTHING for -h at all.
reboot should return the same as --help when -h is passed
SRU Request submitted
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1823037
Title:
amd_iommu possible data corruption
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu
** Description changed:
[Impact]
- iommu/amd: Reserve exclusion range in iova-domain
-
- BugLink: https://bugs.launchpad.net/bugs/1823037
-
If a device has an exclusion range specified in the IVRS
table, this region needs to be reserved in the iova-domain
of that device. This hasn't happ
** Description changed:
[Impact]
iommu/amd: Reserve exclusion range in iova-domain
BugLink: https://bugs.launchpad.net/bugs/1823037
If a device has an exclusion range specified in the IVRS
table, this region needs to be reserved in the iova-domain
of that device. This hasn't happ
** Description changed:
[Impact]
- iommu/amd: Set exclusion range correctly
-
- BugLink: https://bugs.launchpad.net/bugs/1823037
-
- The exlcusion range limit register needs to contain the
- base-address of the last page that is part of the range, as
- bits 0-11 of this register are treated as
** Description changed:
[Impact]
iommu/amd: Set exclusion range correctly
-
+
BugLink: https://bugs.launchpad.net/bugs/1823037
-
+
The exlcusion range limit register needs to contain the
base-address of the last page that is part of the range, as
bits 0-11 of this register
** Description changed:
[Impact]
+ iommu/amd: Reserve exclusion range in iova-domain
If a device has an exclusion range specified in the IVRS table, this region
needs to be reserved in the iova-domain of that device. This hasn't happened
until now and can cause data corruption on data transf
Hi, Perhaps you could edit the summary of this bug and tone it down a
bit and remove the unnecessary expletives.
https://www.ubuntu.com/community/code-of-conduct
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.
** Description changed:
[Impact]
If a device has an exclusion range specified in the IVRS table, this region
needs to be reserved in the iova-domain of that device. This hasn't happened
until now and can cause data corruption on data transfered with these devices.
Treat exclusion ranges
** Description changed:
[Impact]
If a device has an exclusion range specified in the IVRS table, this region
needs to be reserved in the iova-domain of that device. This hasn't happened
until now and can cause data corruption on data transfered with these devices.
-
- Treat exclusion ra
Unfortunately, I do not have the hardware to test this. I can load the
driver but without an HBA I can't recreate the crash.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1827330
Title:
[block layer
After further study I've concluded that this bug is a duplicate of this
one:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1827884
I am seeing the exact same symptoms.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bu
This also looks to be in upstream stable as of May 19, so I presume will
land in an SRU for Disco at some point.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1827330
Title:
[block layer] please pul
Hi Shagun,
Could you also try the upstream builds (info below) and make sure the patch
resolves the issue:
https://wiki.ubuntu.com/Kernel/MainlineBuilds
It looks like this landed upstream right after kernel freeze and thus
wasn't pulled into Disco. Looks like a matter of just very close
timing.
commit fd9c40f64c514bdc585a21e2e33fa5f83ca8811b
Author: Bart Van Assche
Date: Thu Apr 4 10:08:43 2019 -0700
block: Revert v5.0 blk_mq_request_issue_directly() changes
blk_mq_try_issue_directly() can return BLK_STS*_RESOURCE for requests that
have been queued. If that happens wh
I have a Lenovo G500 (32 bit laptop about 5 years old).
I am seeing the same behavior on my system. Booting 4.15.0-47-generic works
fine, but both
4.15.0-48-generic and 4.15.0-50-generic usually hang at boot time. If I enter
grub at boot and select 4.15.0-50-generic, it usually hangs at this:
** Tags added: hwcert-server
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1828637
Title:
sru cloud-init (18.5-45 to 19.1.1) Xenial, Bionic, Cosmic, Disco
To manage notifications about this bug go
Note that I booted into the working 4.15.0-47-generic to submit this
report since I can't get the boot to run long enough to run ubuntu-bug
under 4.15.0-48-generic.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad
Public bug reported:
Last week my Lenovo G500 laptop running ubuntu 18.04 reported an
available system update of about 180 MBs, which included a kernel
version update. I installed it and following the reboot, the display
hung with a purple screen with bands of random colored pixels across the
scre
** Also affects: cloud-init (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1819994
Title:
cloud-init selects sysconfig netconfig renderer if netwo
Precise is EOL
** Changed in: unity (Ubuntu Precise)
Status: Triaged => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/49579
Title:
screen doesn't lock when some menu is open
To ma
Precise is EOL
** Changed in: gnome-screensaver (Ubuntu Precise)
Status: Triaged => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/49579
Title:
screen doesn't lock when some menu is
Public bug reported:
Using 18.04, when wayland is selected for the session, byzanz-record
doesn't work. It always errors:
> byzanz-record -c -d 8 -x 10 -y 10 -w 200 -h 150 /tmp/test.gif
Given area is not inside desktop.
I've tried making sure I'm on the top-left workspace, I've tried various
siz
Does this work in Disco w/ 5.0 kernel?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1819485
Title:
AMD Rome : Additional patches
To manage notifications about this bug go to:
https://bugs.launchpa
So I'm a bit confused because I've been told that A: additional patches
are necessary to solve the issue, and B: that the issue is solved
without those additional patches.
When you did the test, were you using the older, failing firmware
levels, or have you updated to the patched firmware that is
Hi Tyler, do you have any update for this bug?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801574
Title:
[cosmic] ipoib ping with large message size failed
To manage notifications about this bug
I have encountered this problem on Ubuntu Bionic (running in VMWare
Fusion) with Chrome latest open. Chrome will start drawing the page
randomly (I've seen that on really old versions of Chrome on Mac). When
it starts doing that I can lock-up my OS by doing a `killall chrome`
from terminal. When I
me kind of
"apps" to keep out the snoops and trackers.
Thank you for your time
How many times did you get this e mail?I just sent it to you and it went to
someone else that isn't even in my contacts.
MARANATHA
ONE NATION UNDER GOD!
Have a great day
Jeff W
MARANATHA
ONE NATION
me kind of
"apps" to keep out the snoops and trackers.
Thank you for your time
MARANATHA
ONE NATION UNDER GOD!
Have a great day
Jeff W
On Sunday, April 14, 2019, 8:15:40 PM PDT, Daniel van Vugt
wrote:
** Package changed: xorg (Ubuntu) => ubuntu
--
You received this bug
Public bug reported:
My computer keeps changing. Sometimes my add ons on firefox are gone,
and I have many programs I do not want on MY computer! I have very
little control over my own property. Why can't I remove the programs I
do not want, like the games and all the log files and analyzers and
r
Test kernels are up here:
https://people.canonical.com/~jlane/testkernels/
Please test each and report back
** Changed in: linux (Ubuntu Cosmic)
Status: Confirmed => In Progress
** Changed in: linux (Ubuntu Bionic)
Status: Confirmed => In Progress
--
You received this bug notific
** Changed in: linux-aws (Ubuntu)
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1808437
Title:
Unable to obtain an Emulex LPe35000 series adapter firmware dump in
18.
Hi Talat. Have you built the current upstream version 0.7.3 and tried it
to verify that has the CX4 support?
I'm working a bit on this to see if I can get this bug rolling again,
but it would help to know for sure that the updated version does show
the info you need it to show.
I'll also try to t
** Also affects: linux (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1808437
Title:
Unable to obtain an Emulex LPe35000 series adapter firmware d
omain
[Regression Risk]
Only affects the amd_iommu driver:
drivers/iommu/amd_iommu*
** Affects: linux (Ubuntu)
Importance: Medium
Assignee: Jeff Lane (bladernr)
Status: In Progress
** Affects: linux (Ubuntu Bionic)
Importance: Undecided
Assignee: Jeff Lane (bla
related branch
https://code.launchpad.net/~bladernr/ubuntu/+source/linux/+git/disco/+ref/amd-iommu-cherrypick
** Also affects: linux (Ubuntu Disco)
Importance: Medium
Assignee: Jeff Lane (bladernr)
Status: In Progress
** Changed in: linux (Ubuntu Cosmic)
Assignee: (unassigned
Yes. Problem is still present in 4.4.0-145.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1818049
Title:
virtualbox dkms modules fail to build with linux 4.4.0-143.169 [error:
too many arguments
Seth thank you for the work you have done and are doing on this. Andy
of post 13, thank you for the walk through on your web site. I was
about to patch and install for my Geforce 7900 GS on Mint 19.1 using the
4.15.xxx kernel using Andy's guide, successfully.
--
You received this bug notificat
Hi Talat,
Something else occurs to me, could you list which kernels are affected?
Is this correct so far:
4.15: Not affected
4.18: Affected
How about 5.0 and perhaps 4.4 (not sure if 4.4 includes support for this
though, so that may be not worth investigating.)
And for failing kernels, could yo
Err... nevermind 4.4 anyway. just 5.0 would be interesting to see if
this persisted into Disco.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1801574
Title:
[cosmic] ipoib ping with large message si
** Changed in: biosdevname (Ubuntu)
Assignee: Brian Fromme (brianfromme) => Ubuntu Foundations Bugs
(foundations-bugs)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1535045
Title:
Biosdevname
Any ETA when a version will be ready to play with?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1723392
Title:
Please update backuppc to 4.x release (now 4.2.1) - major improvements
and lots of b
Both these packages are reported as broken after both a fresh install
and as an upgrade from 16.04.
iF grub-efi-amd64-signed (1.93.13+2.02-2ubuntu8.12)
iU shim-signed (1.37~18.04.3+15+1533136590.3beb971-0ubuntu1)
System failed to boot after the fresh install. Successfully installed
16.04 a
Happens to me in 18.04 desktop
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1725955
Title:
"Printer added" notification
To manage notifications about this bug go to:
https://bugs.launchpad.net/gno
Okay. I checked the POWER setting. You're correct. It only showed
Suspend (no hibernate).
Anyway, I commented out "blacklist i2c_i801" and rebooted. After
suspend, two finger scroll works.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubunt
apport information
** Attachment added: "WifiSyslog.txt"
https://bugs.launchpad.net/bugs/1818381/+attachment/5245025/+files/WifiSyslog.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1818381
Ti
apport information
** Attachment added: "ProcCpuinfoMinimal.txt"
https://bugs.launchpad.net/bugs/1818381/+attachment/5245019/+files/ProcCpuinfoMinimal.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/
apport information
** Attachment added: "ProcInterrupts.txt"
https://bugs.launchpad.net/bugs/1818381/+attachment/5245020/+files/ProcInterrupts.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/181
apport information
** Attachment added: "ProcCpuinfo.txt"
https://bugs.launchpad.net/bugs/1818381/+attachment/5245018/+files/ProcCpuinfo.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1818381
apport information
** Attachment added: "IwConfig.txt"
https://bugs.launchpad.net/bugs/1818381/+attachment/5245016/+files/IwConfig.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1818381
Title:
apport information
** Attachment added: "UdevDb.txt"
https://bugs.launchpad.net/bugs/1818381/+attachment/5245024/+files/UdevDb.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1818381
Title:
Tw
apport information
** Attachment added: "PulseList.txt"
https://bugs.launchpad.net/bugs/1818381/+attachment/5245022/+files/PulseList.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1818381
Titl
apport information
** Attachment added: "Lspci.txt"
https://bugs.launchpad.net/bugs/1818381/+attachment/5245017/+files/Lspci.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1818381
Title:
Two
apport information
** Attachment added: "CurrentDmesg.txt"
https://bugs.launchpad.net/bugs/1818381/+attachment/5245015/+files/CurrentDmesg.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1818381
apport information
** Attachment added: "ProcModules.txt"
https://bugs.launchpad.net/bugs/1818381/+attachment/5245021/+files/ProcModules.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1818381
apport information
** Description changed:
Two finger scroll does not work in Chromium browser after HIBERNATION. I
restarted Chromium browser and it did not resolve two finger scroll issue. I
log out, then log back on. Again, it did not resolve two finger scroll issue.
SO, I rebooted and it
apport information
** Attachment added: "CRDA.txt"
https://bugs.launchpad.net/bugs/1818381/+attachment/5245014/+files/CRDA.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1818381
Title:
Two fi
apport information
** Attachment added: "RfKill.txt"
https://bugs.launchpad.net/bugs/1818381/+attachment/5245023/+files/RfKill.txt
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1818381
Title:
Tw
This time, I replicate the issue and run apport-collect afterward
(requested by developer). I hope this helps!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1818381
Title:
Two finger scroll does not
Sorry. I was very busy this week. Ugh. Hmm. No. I did "apport-collect" long
after the incident (Sat) on Monday evening.
Do you want me to "apport-collect" right after the incident? I can
replicate the issue (two finger scroll stops working).
Jeff
On Tue, Mar 5, 2019 at 2
I don't believe this is a bug in Checkbox, checkbox can only use the
info that the kernel and system tools provide. This could be a driver
issue, or perhaps a cabling issue. Could you
A: verify the cables are plugged into the correct places and check via ethtool
what the connect speeds are for
** Also affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Changed in: checkbox
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1817412
Title:
"netwo
701 - 800 of 8687 matches
Mail list logo