Re: [Bug 1716586] Re: package rawtherapee-data (not installed) failed to install/upgrade: poging tot overschrijven van '/usr/share/rawtherapee/options', wat ook in pakket rawtherapee 4.2-4dhor~trusty

Dear Philip, I have corrected as you suggest. No problems any longer. Thanks for prompt help. My first negative experience with ppa. Best regards Theo van den Berg Op 12-09-17 om 10:13 schreef Philip Rinn: > This is NOT a bug in rawtherapee! You installed a version of rawtherapee > from

[Bug 1716586] [NEW] package rawtherapee-data (not installed) failed to install/upgrade: poging tot overschrijven van '/usr/share/rawtherapee/options', wat ook in pakket rawtherapee 4.2-4dhor~trusty zi

Public bug reported: problem not solvable by remove and install of the whole package ProblemType: Package DistroRelease: Ubuntu 14.04 Package: rawtherapee-data (not installed) ProcVersionSignature: Ubuntu 3.13.0-129.178-generic 3.13.11-ckt39 Uname: Linux 3.13.0-129-generic x86_64 ApportVersion:

[Bug 1630515] Re: topmenu-gtk built against GTK3+ segfaults when clicked

I also see this problem in Ubuntu Mate 17.04. It displays the menu bar but after clicking on it the application crashes. I have downloaded the latest .deb files and installed them but the problem still exist. -- You received this bug notification because you are a member of Ubuntu Bugs, which

[Bug 1702161] [NEW] package linux-image-extra-4.8.0-54-generic 4.8.0-54.57~16.04.1 failed to install/upgrade: Abhängigkeitsprobleme - verbleibt unkonfiguriert

Public bug reported: dont know ProblemType: Package DistroRelease: Ubuntu 16.04 Package: linux-image-extra-4.8.0-54-generic 4.8.0-54.57~16.04.1 ProcVersionSignature: Ubuntu 4.8.0-58.63~16.04.1-generic 4.8.17 Uname: Linux 4.8.0-58-generic x86_64 ApportVersion: 2.20.1-0ubuntu2.6 Architecture:

[Bug 1686048] Re: Touchpad not detected on Lenovo S21e-20

Thanks, I file a bug https://bugzilla.kernel.org/show_bug.cgi?id=195669 2017-05-05 7:10 GMT+02:00 Kai-Heng Feng : > You need to file an upstream report then. It's at > https://bugzilla.kernel.org/ > > -- > You received this bug notification because you are

Re: [Bug 1686048] Re: Touchpad not detected on Lenovo S21e-20

I tested with the parameters one by one but it made no difference. Touchpad isn't detected 2017-05-04 6:50 GMT+02:00 Kai-Heng Feng : > Can you test these kernel parameter, one by one: > i8042.nomux=1 > i8042.reset=1 > i8042.noloop=1 > i8042.kbdreset=1 > i8042.nopnp=1

[Bug 1686048] Re: Touchpad not detected on Lenovo S21e-20

Mainline kernel didn't fix it. Tagged and confirmed as per instructions ** Tags added: kernel-bug-exists-upstream ** Changed in: linux (Ubuntu) Status: Incomplete => Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1686048] Re: Touchpad not detected on Lenovo S21e-20

This is a brand new install. I'll test the new kernel when I have time (in a few hours) -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1686048 Title: Touchpad not detected on Lenovo S21e-20 To

[Bug 1686048] [NEW] Touchpad not detected on Lenovo S21e-20

Public bug reported: xinput list ⎡ Virtual core pointer id=2[master pointer (3)] ⎜ ↳ Virtual core XTEST pointerid=4[slave pointer (2)] ⎜ ↳ USB OPTICAL MOUSEid=9[slave pointer (2)] ⎣ Virtual core keyboard

[Bug 1564317] Re: Successful return code on encoding error

I haven't reported it to Debian, I did not have a test system to confirm that it is present there as well (I'm quite sure it would be present, it is the same package source) (And https://www.debian.org/Bugs/Reporting for manual reporting seems quite scary...) -- You received this bug

[Bug 1505409] Re: gnome-shell crashed with signal 5 in _XIOError()

Just wanted to add that I was experiencing this problem after a Xenial to Yakkety upgrade of Ubuntu Gnome. I ran Startup Application manager and noticed there were a couple gnome shell welcome binaries [/usr/lib/x86_64-linux-gnu/gnome-initial-setup/gnome-welcome-tour] launching on the user login.

[Bug 1564317] Re: Successful return code on encoding error

@Roland: Incorrect upstream, that is python-html2text / python3-html2text. This is from http://www.mbayer.de/html2text/ (And that won't have the issue, since it was introduced in Debian's UTF-8 patch) (Debian might also be affected though) -- You received this bug notification because you are a

[Bug 1564317] Re: Successful return code on encoding error

Also affects 1.3.2a-18 on Ubuntu 16.04. ** Description changed: When running html2text on a file with incorrect encoding (e.g. indicated as us-ascii, but actually UTF-8), it fails with an error message but returns a successful result code (0). Actual output: - $

[Bug 1664640] [NEW] 'Apply a script when download finishes' fail

Public bug reported: Hi. I want shut down the computer when Transmision finishes all the pendant downloads. I use the script 'sudo shutdown -h +4' in the pertinent option but when the first download finishes Transmission executes the script. I thing the problem starts in Transmission because

[Bug 1640978] Re: letsencrypt 0.4.1 contains numerous bugs fixed upstream

Hello everyone. I'm not sure exactly what form you wanted the SRU in, but... I've included a tarball of the source changes files and dsc's, signed, along with the files included in them. This upload has two changes from the version in sid. First, I tweaked the versions in python-certbot to

[Bug 1640978] Re: letsencrypt 0.4.1 contains numerous bugs fixed upstream

Hello everyone -- I'm (the primary, but not only) Debian maintainer of the certbot suite of packages. pde asked me to weigh in here to help answer some of rbasak's questions in a definitive manner. Since the 0.4.1 release, there have been a handful of user-facing changes, but only a few are

[Bug 1628014] Re: WebExtension fails to install only on ubuntu packaged firefox

I've been hitting exactly the same problem on Debian 8 running Firefox 49.0-5~bpo80+1 from https://mozilla.debian.net/. The issue seems to be solved in Firefox 50.0~b11-1~bpo80+1. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1397776] Re: Suggestion for switchboard-inputmethod-plug to install , remove and set Input Method for non-english based users. [$100]

GNOME has ibus baked in and integrates this into the Region & Language section of their Control Center, which contains Language and Format options like Switchboard's Language & Region plug. It is very slick, including a nice language selector that shows up in the top bar when you have more than

[Bug 1609700] Re: username not saved

I am experience this same problem in Ubuntu Gnome 16.04.1, it's quite frustrating. I've tried to edit the config file in /etc/NetworkManager /system-connections and manually enter user, username, Xauth user parameters all with no effect. Here are my package versions: network-manager

[Bug 1610030] Re: certbot improperly encodes CSRs

The Boulder team reports that they are planning on dropping support for new certs being issued in this circumstance ~September, and with renewals stopped ~January. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1610030] Re: certbot improperly encodes CSRs

Fixed in 0.8. ** Also affects: python-certbot (Ubuntu) Importance: Undecided Status: New ** Changed in: python-certbot (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1610030] [NEW] certbot improperly encodes CSRs

Public bug reported: Hello Ubuntu, I'm writing to request that Xenial migrate the current version of python-certbot from Yakkety, or from Debian sid. There is a bug in the old version of the certbot (then called letsencrypt) client that causes failures in the upstream Let's Encrypt issuing

[Bug 1610030] Re: certbot improperly encodes CSRs

The upstream issue in boulder is: https://github.com/letsencrypt/boulder/issues/1514#issuecomment-188522792 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1610030 Title: certbot improperly encodes

[Bug 1263181] Re: curtin discovers HP /dev/cciss/c0d0 incorrectly

Will this be fixed for Ubuntu 16.04 LTS Xenial Xerus? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1263181 Title: curtin discovers HP /dev/cciss/c0d0 incorrectly To manage notifications about

[Bug 1263181] Re: curtin discovers HP /dev/cciss/c0d0 incorrectly

Same for me Error: /dev/cciss/c0d0: unrecognised disk label An error occured handling 'cciss!c0d0': OSError - [Errno 2] No such file or directory: '/sys/block/c0d0/holders' [Errno 2] No such file or directory: '/sys/block/c0d0/holders' Installation failed with exception: Unexpected error while

[Bug 1544122] Re: missing package postgresql-9.5-plv8 for Ubuntu 14.04+

** Changed in: plv8 (Ubuntu) Status: Opinion => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1544122 Title: missing package postgresql-9.5-plv8 for Ubuntu 14.04+ To manage

[Bug 1564317] Re: Successful return code on encoding error

Note: This is probably also present in Debian, since it seems like the Ubuntu package is mostly unmodified. ** Also affects: hundredpapercuts Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1564317] Re: Successful return code on encoding error

My attempt at an actual patch. The other method, of actually changing all the error handling to save that there have been an error and returning the code at the end might still make sense for later. ** Patch added: "Patch to modify patches to return an error code on recoding errors"

[Bug 1564317] Re: Successful return code on encoding error

Diffs for patch files: (for simple fix - return 2 for recoding error, don't attempt to continue to other files) (The problem seems to be present to at least the precise version) --- 611-recognize-input-encoding.patch.orig 2016-03-31 18:25:01.914598768 +0200 +++

[Bug 1564317] Re: Successful return code on encoding error

The simplest fix is to replace the "continue" in the recode error handlers with "exit(1)" (Patched html2text.C lines 595 and 555). (Using a different value for encoding errors might be useful) This makes the error handling consistent with other cases, like failing to open a file. (See line 482)

[Bug 1564317] Re: Successful return code on encoding error

Quick method to test: sudo apt-get install html2text curl -s https://launchpadlibrarian.net/250515419/test.html | html2text; echo $? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1564317 Title:

[Bug 1564317] [NEW] Successful return code on encoding error

Public bug reported: When running html2text on a file with incorrect encoding (e.g. indicated as us-ascii, but actually UTF-8), it fails with an error message but returns a successful result code (0). Actual output: - $ html2text test.html; echo $? Input recoding failed due to

[Bug 1531443] [NEW] Cannot install grub on laptop with Windows10 (Lonovo G50-80)

Public bug reported: created /boot (2048 GB); / 10240GB; /home 30GB; wsap 1024GB problems with installing Grub (due to TPM on laptop?) ProblemType: Bug DistroRelease: Ubuntu 14.04 Package: ubiquity 2.18.8.9 ProcVersionSignature: Ubuntu 3.19.0-25.26~14.04.1-generic 3.19.8-ckt2 Uname: Linux

[Bug 1528822] Re: Installation hangs at password prompt

** Changed in: postgresql-common (Ubuntu) Status: New => Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1528822 Title: Installation hangs at password prompt To manage notifications

[Bug 1528822] Re: Installation hangs at password prompt

I'd think the problem is somewhere in your PAM setup. For some reason "su" is asking for a password even when running as root: su -s /bin/sh postgres -c "test -O /var/lib/postgresql && test -G /var/lib/postgresql" || \ chown postgres:postgres /var/lib/postgresql To be

[Bug 1509614] Re: 14e4:43ba Wireless BCM43602 802.11ac cannot connec to to 5 GHz networks - MacBook Pro 11, 5

For some reason since the latest linux-firmware update (among others) that came through, I came through I am now able to connect to 5 GHz networks. I've been on 4.3rc7 for sometime which I saw now is 4.3 final. I haven't confirmed that it is OK on my home AP at the moment, but definitely is

[Bug 1509614] Re: Wireless BCM43602 802.11ac cannot connecto to 5 GHz networks - MacBook Pro 11, 5

Just ended up with a bunch of stuff in dmesg regarding 80211 cfg throwing errors. ** Attachment added: "dmesg-errors" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1509614/+attachment/4506160/+files/dmesg-errors -- You received this bug notification because you are a member of Ubuntu

[Bug 1509614] Re: Wireless BCM43602 802.11ac cannot connecto to 5 GHz networks - MacBook Pro 11, 5

Just ended up with a bunch of stuff in dmesg regarding 80211 cfg throwing errors. ** Attachment added: "dmesg-errors" https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1509614/+attachment/4506159/+files/dmesg-errors -- You received this bug notification because you are a member of Ubuntu

[Bug 1509614] Re: Wireless BCM43602 802.11ac 5 GHz not scanable on linux-firmware 1.1.49 - MacBook Pro 11, 5

@penalvch TP-Link Archer C5_V1.20_150428 is the firmware on the access point. Other 5 GHz devices are connecting fine. I'm currently at work and we have an enterprise 802.11x setup with Cisco AIR-CAP3602I-N-K9 APs with the AIR-RM3000AC-Z-K9 AC modules. I am unsure what firmware revision is on

[Bug 1509614] Re: Wireless BCM43602 802.11ac cannot connecto to 5 GHz networks - MacBook Pro 11, 5

Just to confirm, I suspect the move to Kernel 4.3 rc6 has got the 5 GHz scanning working. For some reason the device just doesn't want to connect to 5 GHz. Not sure if I can make the adapter connect to explicitly connect to 5 GHz as the network is advertised on both frequency bands. -- You

[Bug 1509614] Re: Wireless BCM43602 802.11ac cannot connecto to 5 GHz networks - MacBook Pro 11, 5

Tested with 4.3 rc7 and same behaviour still present. ** Tags removed: kernel-bug-exists-upstream-4.3-rc6 ** Tags added: kernel-bug-exists-upstream-4.3-rc7 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1509614] Re: Wireless BCM43602 802.11ac 5 GHz not scanable on linux-firmware 1.1.49 - MacBook Pro 11, 5

kernel-bug-exists-upstream-4.3-rc6 ** Package changed: linux (Ubuntu) => linux-firmware (Ubuntu) ** Changed in: linux-firmware (Ubuntu) Status: Incomplete => Confirmed ** Tags added: kernel-bug-exists-upstream-4.3-rc6 -- You received this bug notification because you are a member of

[Bug 1509614] [NEW] Wireless BCM43602 802.11ac 5 GHz not scanable on linux-firmware 1.1.49 - MacBook Pro 11, 5

Public bug reported: Distribution: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=15.10 DISTRIB_CODENAME=wily DISTRIB_DESCRIPTION="Ubuntu 15.10" Package Details: linux-firmware: Installed: 1.149 Candidate: 1.149 Version table: *** 1.149 0 500 http://mirror.optus.net/ubuntu/ wily/main amd64

[Bug 1487524] Re: 14e4:43ba Broadcom BCM43602 not seeing 5Ghz range

Ubuntu 15.10 with the firmware 1.149 package: ~$ lspci | grep Network 04:00.0 Network controller: Broadcom Corporation BCM43602 802.11ac Wireless LAN SoC (rev 01) ~$ dpkg -l | grep firmware ii linux-firmware 1.149 I can see that

[Bug 810622] Re: Invites can only be accepted into local calendars

Indeed strange. This setting also solved my problem, but I don't understand why this option is set on false at default. I guess it can conflict if you got multiple calendars (like a local 'home' calendar and a second Gmail calendar)? Furthermore, the other person don't get a confirmation

[Bug 1022287] Re: negative compression ratio if list a big gzip file

See page 7 of https://www.ietf.org/rfc/rfc1952.txt (ISIZE is the relevant field) It is an limitation of the gzip file format... It is also documented in the gzip man page under "BUGS", with a (slow) workaround... One way to fix it might be to define an "extra field" with a larger original file

[Bug 1457550] Re: "bnx2x 0000:01;00.2 eth2: MDC/MDIO access timeout” on network start

Hello, I forgot to update this ticket. This NIC arrived with a newer firmware version then the others I have used. for now I have been downgrading this NIC to firmware-version: FFV7.10.18, with file "Network_Firmware_NF92Y_LN_7.10.18.BIN" from Dell. 7.10.18 was the last version I could find that

[Bug 1479246] [NEW] package libisc95 1:9.9.5.dfsg-3ubuntu0.4 failed to install/upgrade: package libisc95 is already installed and configured

Public bug reported: automatic generated report ProblemType: Package DistroRelease: Ubuntu 14.04 Package: libisc95 1:9.9.5.dfsg-3ubuntu0.4 ProcVersionSignature: Ubuntu 3.13.0-59.98-generic 3.13.11-ckt22 Uname: Linux 3.13.0-59-generic x86_64 ApportVersion: 2.14.1-0ubuntu3.11 AptdaemonVersion:

[Bug 1479228] [NEW] package qemu-system-common 2.0.0+dfsg-2ubuntu1.15 failed to install/upgrade: package qemu-system-common is already installed and configured

Public bug reported: i dont know the bug its a automatic generated report ProblemType: Package DistroRelease: Ubuntu 14.04 Package: qemu-system-common 2.0.0+dfsg-2ubuntu1.15 ProcVersionSignature: Ubuntu 3.13.0-59.98-generic 3.13.11-ckt22 Uname: Linux 3.13.0-59-generic x86_64 ApportVersion:

[Bug 1311839] Re: Segment faults on gwave after update to Ubuntu 14.04

still not solved :( -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1311839 Title: Segment faults on gwave after update to Ubuntu 14.04 To manage notifications about this bug go to:

[Bug 1457550] [NEW] bnx2x 0000:01;00.2 eth2: MDC/MDIO access timeout” on network start

Public bug reported: Hello, I have a Dell R630 with a Broadcom NetXtreme II BCM57800 1/10 Gigabit Ethernet (rev 1) network card that when networking starts or I run dhclient on it starts printing the error bnx2x :01;00.2 eth2: MDC/MDIO access timeout” several times a second until I

[Bug 1451722] Re: scale plugin doesn't remember binding to screen edge

This seems to be fixed ? I've disabled / enabled to hotcorner with unity-tweak-tool and somehow the problem has disappeared. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1451722 Title: scale

[Bug 1451722] [NEW] scale plugin doesn't remember binding to screen edge

Public bug reported: After logging in the unity desktop, activating the scale plugin via a 'hotspot' (in my case uper left corner) doesn't work even though the option is activated in ccsm. Disabling and re-enabling the binding makes it work again ProblemType: Bug DistroRelease: Ubuntu 14.04

[Bug 942255] Re: Ability to save or export results

I really need this, I takes ALOT OF minutes (hours?) to get a diagram of multiple TB's disk in order to get it analyzed ... I would like to transfer the output to other persons, but that isn't possible. Now when people also want to have the complete list (interactive) they also need to run this

[Bug 1412401] [NEW] fusion-icon crashes with Seqmentaion fault

Public bug reported: fusion-icon * Detected Session: xubuntu * Searching for installed applications... Segmentation fault (core dumped) ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: fusion-icon 0.1.0-3ubuntu1 ProcVersionSignature: Ubuntu 3.16.0-29.39-lowlatency 3.16.7-ckt2 Uname:

[Bug 1411922] [NEW] nvidia-331-updates 331.113-0ubuntu0.0.4: nvidia-331-updates kernel module failed to build

Public bug reported: I got the message that something is wrong. Do not know what. Was asked to report; which is what I am doing now. ProblemType: Package DistroRelease: Ubuntu 14.04 Package: nvidia-331-updates 331.113-0ubuntu0.0.4 ProcVersionSignature: Ubuntu 3.13.0-45.74-generic 3.13.11-ckt13

[Bug 1356756] Re: broadcom-sta-dkms 6.30.223.141-1: broadcom-sta kernel module failed to build [error: macro __DATE__ might prevent reproducible builds]

@jsalisbury tried to install 6.30.223.248 from broadcom website. the error is not fixed. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1356756 Title: broadcom-sta-dkms 6.30.223.141-1: broadcom-sta

[Bug 1383214] [NEW] msiexec no longer works

Public bug reported: It seems to me this has to do with wine being compiled with gcc 4.9 https://bugs.winehq.org/show_bug.cgi?id=36453 output msiexec /i superwave_p8.msi err:msidb:get_tablecolumns column 1 out of range err:msidb:get_tablecolumns column 2 out of range

[Bug 1380315] Re: [Dell Inspiron Desktop 3847] Bluetooth not working - Bluetooth: Error in firmware loading

bluetooth not working ... dmesg | grep Blue [ 14.054810] Bluetooth: Core ver 2.19 [ 14.054825] Bluetooth: HCI device and connection manager initialized [ 14.054830] Bluetooth: HCI socket layer initialized [ 14.054832] Bluetooth: L2CAP socket layer initialized [ 14.054840] Bluetooth: SCO

[Bug 1380315] Re: [Dell Inspiron Desktop 3847] Bluetooth not working - Bluetooth: Error in firmware loading

just updated bios, bluetooth is working but then again, it worked on and off before the bios update :-) will let you know if it keeps working sudo dmidecode -s bios-version sudo dmidecode -s bios-release-date A05 08/18/2014 bios is definitely updated ... -- You received this bug notification

[Bug 1380315] [NEW] Bluetooth not working - Bluetooth: Error in firmware loading

Public bug reported: Most of the time bluetooth doesn't work. On rare occasions bluetooth does load and I can see the blueman applet. ProblemType: Bug DistroRelease: Ubuntu 14.10 Package: linux-image-3.16.0-22-lowlatency 3.16.0-22.29 ProcVersionSignature: Ubuntu 3.16.0-22.29-lowlatency 3.16.4

[Bug 1349752] Re: Bluetooth not working - Bluetooth: Error in firmware loading

I've upgraded to 14.10 so closing this -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1349752 Title: Bluetooth not working - Bluetooth: Error in firmware loading To manage notifications about this

[Bug 1376895] [NEW] kde 4.14.1 on Trusty does not suspend to ram on laptop lid close nor a button on K menu / Leave

Public bug reported: suspend did work before the upgrade to 4.14.1 (I was on 4.13.? not sure) sudo pm-suspend does do the correct thing. from 'upower -d' Daemon: daemon-version: 0.9.23 can-suspend: yes can-hibernate: no on-battery: yes on-low-battery: no lid-is-closed:

[Bug 1376895] Re: kde 4.14.1 on Trusty does not suspend to ram on laptop lid close nor a button on K menu / Leave

After the upgrade to 4.14.1 I had loged out and restarted lightdm, I havce since rebooted my laptop and now suspend is fine. sorry to waste time, this ticket can be closed. -- You received this bug notification because you are a member of Kubuntu Bugs, which is subscribed to Kubuntu PPA.

[Bug 1351282] Re: Sometimes USB does not work.

thanks for your suggestions @penalvch and @setaou running 3.17.0-031700rc5-lowlatency for a couple of days and I haven't noticed any usb failure at startup should we mark this bug as closed / fixed ?? -- You received this bug notification because you are a member of Ubuntu Bugs, which is

[Bug 160311] Re: Resizing windows by grabbing window borders is difficult

After 7 years it is finally confirmed! :O -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/160311 Title: Resizing windows by grabbing window borders is difficult To manage notifications about this

[Bug 1349752] Re: Bluetooth not working - Bluetooth: Error in firmware loading

Bluetooth still doesn't work with kernel 3.17.0-031700rc5-lowlatency dmesg | grep Bluetooth [ 14.006751] Bluetooth: Core ver 2.19 [ 14.006767] Bluetooth: HCI device and connection manager initialized [ 14.006772] Bluetooth: HCI socket layer initialized [ 14.006773] Bluetooth: L2CAP

[Bug 1351282] Re: Sometimes USB does not work.

problem is that sometimes it works and sometimes it doesn't ... so installing a new kernel and usb works fine that isn't a solution is it. But today usb stopped working and I found this in kern.log Sep 12 11:52:55 lesruimte kernel: [ 22.266768] xhci_hcd :00:14.0: HC died; cleaning up

[Bug 1351282] Re: Sometimes USB does not work.

attached usb devices at time of boot lsusb Bus 002 Device 002: ID 8087:8000 Intel Corp. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003

[Bug 1349752] Re: Bluetooth not working - Bluetooth: Error in firmware loading

I'm sorry for my lack of feedback :-/ Sometimes it works and sometimes it doesn't. Bluetooth isn't that important to me but still I think this should work. I'm suspecting it might have to do with usb failure as in https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1351282 -- You received

[Bug 1351282] [NEW] Sometimes USB does not work.

Public bug reported: Sometimes after booting, USB does not work I can't use the keyboard or mouse to find out. Only solution is to kill the system by long-pressing the powerbutton. The second time I boot, the USB system works. ProblemType: Bug DistroRelease: Ubuntu 14.04 Package:

[Bug 1349752] Re: Bluetooth not working - Bluetooth: Error in firmware loading

today I booted and somehow, as if by magic, Bluetooth works ... dmesg | grep Bluetooth [ 11.759099] Bluetooth: Core ver 2.17 [ 11.759111] Bluetooth: HCI device and connection manager initialized [ 11.759117] Bluetooth: HCI socket layer initialized [ 11.759118] Bluetooth: L2CAP socket

[Bug 1349752] [NEW] Bluetooth not working - Bluetooth: Error in firmware loading

Public bug reported: Bluetooth doesn't work. l dmesg | grep Bluetooth [ 13.627556] Bluetooth: Core ver 2.17 [ 13.627567] Bluetooth: HCI device and connection manager initialized [ 13.627573] Bluetooth: HCI socket layer initialized [ 13.627574] Bluetooth: L2CAP socket layer initialized [

[Bug 1349752] Re: Bluetooth not working - Bluetooth: Error in firmware loading

bug still exist --- uname -r 3.16.0-031600rc7-lowlatency --- $dmesg | grep Blue [7.853547] Bluetooth: Core ver 2.19 [7.855409] Bluetooth: HCI device and connection manager initialized [7.856324] Bluetooth: HCI

[Bug 1185771] Re: Mark libwebkitgtk-1.0-common as Multi-Arch: foreign

Same issue as Edb, can't start Citrix anymore running Linux Mint (Ubuntu), with the error: libwebkit: libwebkit-1.0.so: cannot open shared object file: No such file or dir -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1326133] [NEW] pcmanfm doesn't show icons for mounted devices

Public bug reported: Suddenly PCManFm doesn't show the icons for mounted drives (both USB google-drive-ocamlfuse) Anyone else has this ? Today I was trying out cairo-dock. I decided to remove it and noticed my desktop was kind of messed up. Icons were very far apart. Later on I noticed the

[Bug 1317514] [NEW] Kupfer stops responding to keyboard input

Public bug reported: Sometimes kupfer doesn't respond to the keyboard, specifically the [ENTER] key. I can use the arrow keys and type commands but it won't execute the commands. After stopping and starting kupfer again it responds again. Can't detect a particular action that makes kupfer behave

[Bug 1299002] Re: gpu-manager xorg.conf inconsistency with AMD Catalyst (fglrx)

After complete system reinstall, and selecting fglrx from Driver Manager (instead of manually installing from http://support.amd.com/en- us/download/desktop?os=Linux%20x86_64) I have no problems. No need for manual install. Still keyword search in gnu-manager SHOULD search label Driver from

[Bug 1299002] [NEW] gpu-manager xorg.conf inconsistency with AMD Catalyst (fglrx)

Public bug reported: This is a bug report against gpu-manager.c in ubuntu-drivers-common. ~/Documents/VC/ubu/ubuntu-drivers-common/share/hybrid$ bzr log revno: 56 tags: 1:0.2.91.1 author: Alberto Milone committer: Package Import Robot

[Bug 1299002] Dependencies.txt

apport information ** Attachment added: Dependencies.txt https://bugs.launchpad.net/bugs/1299002/+attachment/4048600/+files/Dependencies.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1299002

[Bug 1299002] ProcEnviron.txt

apport information ** Attachment added: ProcEnviron.txt https://bugs.launchpad.net/bugs/1299002/+attachment/4048601/+files/ProcEnviron.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1299002

[Bug 1299002] UbuntuDriversDebug.txt

apport information ** Attachment added: UbuntuDriversDebug.txt https://bugs.launchpad.net/bugs/1299002/+attachment/4048602/+files/UbuntuDriversDebug.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1284273] [NEW] Musescore mistakenly suspends pulseaudio because of missing gawk

Public bug reported: xubuntu 14.04 From http://musescore.org/en/node/22727 By default Ubuntu has mawk installed instead of gawk and so Musescore suspends pulseaudio when it does not need to. A temporary fix is to install gawk, however this should work out of the box. I've created a symlink to

[Bug 1280969] Re: Corrupt mouse cursor when using multiple monitors

For the first time, the corruption is now in both screens simultaneously. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1280969 Title: Corrupt mouse cursor when using multiple monitors To manage

[Bug 1280969] Re: Corrupt mouse cursor when using multiple monitors

Video and photos of the thing. Screen and video capture shows perfect pointer. However on the screen pointer is corrupt. Simultaneous screen capture and video (with camera) provided. Does this isolate the bug at all? https://www.dropbox.com/sh/cbk67l0wxg3zbzo/Pg9tUVM6n3 -- You received this

[Bug 1272291] Re: Corrupt mouse cursor when using multimonitors

Screen capture of the window taken when mouse pointer corruption is visible on the screen. Screen capture suprisingly shows that everything is fine. Mouse pointer here is as it should be. However the photo of the previous comment was taken at the same time, without moving the mouse and clearly in

[Bug 1272291] Re: Corrupt mouse cursor when using multimonitors

I have reproduced the same on Ubuntu 13.10 (KDE), Linuxmint 16 (KDE), and now also Linuxmint 16 (Cinnamon). I will attach screenshot (using camera, where you can see the actual phenomenon), Screen capture DOES NOT capture the error, I will attach that to next comment. Maybe that helps to isolate

[Bug 1280969] Re: Corrupt mouse cursor when using multiple monitors

** Attachment added: Photo of the screen capture taken at the same time as previous photo https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1280969/+attachment/3983473/+files/Screenshot%20from%202014-02-16%2016%3A16%3A13.png -- You received this bug notification because you are a member

[Bug 1280969] [NEW] Corrupt mouse cursor when using multiple monitors

Public bug reported: I have two screens, and sometimes on one of the screens mouse cursor gets corrupted. So far always vertically in 5 slices. The corrupt cursor is always in the primary screen. The cursor is fine on the second screen. If I take a screenshot (using the screenshot application on

[Bug 1088146] Re: Asus n56vz battery state is wrong or battery not charging at all.

Does anyone know if the x550 ASUS models have the same issue? This might not matter, but from the spec sheet it looks like they use a different battery. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu.

[Bug 1212208] Re: quilt patches are not applied during --unbuilt-tree build

I have the same problem with --built-tree. I'm using git/bzr/svn checkouts instead of dpkg-source, so by default, the trees do not have quilt patches applied. dpkg-buildpackage will then apply all patches, build, but will pop all patches afterwards. This tree is compiled in the sense that it

[Bug 1088146] Re: Asus n56vz battery state is wrong or battery not charging at all.

Also had this issue on an N550JV with Ubuntu 12.04LTS. When booting into Win8 via grub the issue remained - battery would not charge, flashing amber light. Returned the machine. I'm considering getting N56JR, at least that model has easy access to the battery compartment. I'm a Linux noob -

[Bug 1244237] Re: Ubuntu 13.04 Unity desktop background smears when dragging windows

I purged cinnamon (including Nemo), and that seems to have fixed the problem. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1244237 Title: Ubuntu 13.04 Unity desktop background smears when dragging

[Bug 1244237] Re: Ubuntu 13.04 Unity desktop background smears when dragging windows

I have a similar problem (ubuntu 12.04-3), it occurred after upgrading the linux kernell to 3.8.0-32-generic. I tried different video drivers, but doesnt seem to help. Cinnamon works fine. The odd thing is, sometimes it happens sometimes it doesnt, I started my laptop (optimus) this morning and

[Bug 1246132] [NEW] package firefox 24.0+build1-0ubuntu0.12.04.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

Public bug reported: update fail appeared after cleaning out old kernels and other unused packages. ProblemType: Package DistroRelease: Ubuntu 12.04 Package: firefox 24.0+build1-0ubuntu0.12.04.1 ProcVersionSignature: Ubuntu 3.2.0-56.86-generic 3.2.51 Uname: Linux 3.2.0-56-generic i686

[Bug 1237352] [NEW] Rhythmbox crash each time a song ends.

Public bug reported: Each time the song ends the player closes. Probable problem with the zeitgeist [plugin]. Disabling the plugin the problem disappears. Ubuntu version: 13.10 ** Affects: rhythmbox (Ubuntu) Importance: Undecided Status: New ** Tags: plugin rhythmbox zeitgeist

[Bug 1229562] [NEW] package postgresql-9.1 9.1.9-1ubuntu1 failed to install/upgrade: subproces installed pre-removal script gaf een foutwaarde 1 terug

Public bug reported: I removed postgresql because errors occured when adressing the server/tables. When I tried to reinstall the package was broken. Cheers Guus ProblemType: Package DistroRelease: Ubuntu 13.04 Package: postgresql-9.1 9.1.9-1ubuntu1 ProcVersionSignature: Ubuntu

[Bug 418242] Re: Incorrect call to output plugins (with persistent error message) on copy

Same problem with Inkscape-trunk and inkscape 0.48.4 on ubuntu 12.04LTS running Matlab R2013b. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/418242 Title: Incorrect call to output plugins (with

[Bug 1220426] Re: [nvidia-prime]Freeze while using touchpad

** Attachment added: Xorg.0.log https://bugs.launchpad.net/ubuntu/+source/nvidia-prime/+bug/1220426/+attachment/3827860/+files/Xorg.0.log -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1220426

[Bug 1189437] [NEW] End of file reached message after scanning page

Public bug reported: * please note that I'm translating the programs dialogboxes from Dutch * I have a Brother networkscanner. When I scan a page with gscan2pdf, I get a dialogbox with End of file reached. The page is scanned succesfully though. When Clean up image is checked, it isn't run

<    1   2   3   4   5   6   7   8   9   >