We are closing this bug report because it lacks the information we need
to investigate the problem, as described in the previous comments.
Please reopen it if you can give us the missing information, and don't
hesitate to submit bug reports in the future. To reopen the bug report
you can click on
Thank you for taking the time to report this bug and helping to make
Ubuntu better. The issue that you reported is one that should be
reproducible with the live environment of the Desktop CD of the
development release - Karmic Koala. It would help us greatly if you
could test with it so we can
Hi!
I'm running ubuntu 8.10 now.
Here is kernel output after insertion of argosy:
[48452.376053] pccard: PCMCIA card inserted into slot 0
[48452.376070] cs: memory probe 0x0c-0x0f: excluding 0xc-0xc
0xe-0xf
[48452.385589] cs: memory probe 0x6000-0x60ff:
We are closing this bug report because it lacks the information we need
to investigate the problem, as described in the previous comments.
Please reopen it if you can give us the missing information, and don't
hesitate to submit bug reports in the future. To reopen the bug report
you can click on
Is this symptom still reproducible in 8.10 or 9.04?
** Changed in: pcmciautils (Ubuntu)
Status: New = Incomplete
--
Wrong func_id for my argosy RS-COM 2P card
https://bugs.launchpad.net/bugs/185312
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Hello Vitja,
Sorry if you answer late..i used minicom and try to set the pcmcia.
but nothing response.
Condition PC portable/soft minicom ---pc desktop/soft hyperterm yes for the
wryte on the screen
Comunication pcdesk ---pc portable NO Writes on the screen.
I have resolved problem with
That seems to be okay. Two ports are created. /dev/ttyS0 and /dev/ttyS1 did you
tried both? You can change them settings
from minicom with 'CTRL-a p' try 8n1 setting. It should work.
--
Wrong func_id for my argosy RS-COM 2P card
https://bugs.launchpad.net/bugs/185312
You received this bug
argosy rs-com 2p
hello vitja
i have connect pin 2 and 3 , start minicom, but i non have rx on my
screen..rt/tx data.
i news for linux. another operation after installated yoy driver pcmcia-cis??.
setserial config?ioport? what is the next operation after install drive?.
info for you :
Socket 0:
Sorry, I was wrong about 3,4. To test set jumper on 2,3 (TXD, RXD) pins.
Does it works for you?
Nice video, how do you use linux in this area?
Have you tried usb to serial converters, they are much cheaper then pcmcia one
(here about $150),
most of them work just perfect under linux, I tried ones
hello vitja
tnx for answer ,i tested on my pcmcia.
ik0zrr this is call for radioamateur
my job is tecnic on the RAI , yes...italian tv/radio broadcast on italy
live at roma
for another info search
on the web IK0ZRR or visisting
www.radioamatori-rai.it
or
Hello!
When you insert your card, there should be 2 ttyS ports on your system,
you can check dmesg output for numbers, typycally it will be
/dev/ttyS0 and /dev/ttyS1.
minicom is the best tool to test it, disable all the paryty, hw flow
control. Then shortcut 3 and 4 pins with a jumper, then
Hello Vitja,
i have one pcmcia argosy rs-com 2 port , and i used your drive (pcmcia-cis), on
the system ubuntu 7.10 on mt portable pc (hp-xe3).i used the software for
hamradio, kamplus. this is software for the tnc KAM , manifactur kantronics.
the apparence the software dialog with cam , but i
I created package pcmcia-cs (http://ppa.launchpad.net/vitja-
makarov/ubuntu/pool/main/p/pcmcia-cis/)that solves this problem, its
based on CISes from pcmcia-cs, I hope the problem isn't in linux kernel,
but deep inside pcmcia specification and old devices.
By the way pci-express replaces pcmcia
13 matches
Mail list logo