** Changed in: xserver-xorg-video-intel
Importance: Unknown = High
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/221119
Title:
[i945] [gutsy, hardy, intrepid] Blank screen and (EE) intel(0):
** Changed in: xserver-xorg-video-intel
Importance: High = Unknown
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/221119
Title:
[i945] [gutsy, hardy, intrepid] Blank screen and (EE) intel(0):
Solution for me (MSI Neton AP1900 with Intel 945GM Display Adpater) was the
following:
- using vesa-driver
- modified /etc/X11/xorg.log
Section Monitor
Identifier Configured Monitor
HorizSync 30-100
VertRefresh 30-100
EndSection
I used the
Just in order to test and for no better reason (my system with Intel
i845 was working pretty well without Compiz), I decided to try the
latest drivers by adding to my sources.list the following lines and
upgrading:
deb http://ppa.launchpad.net/xorg-edgers/ubuntu intrepid main
deb-src
** Attachment added: Shows the packages from xorg-edgers
http://launchpadlibrarian.net/23048382/var-log-apt-extract
--
[i945] [gutsy, hardy, intrepid] Blank screen and (EE) intel(0): overrun on pipe
B! on i945GM using intel driver
https://bugs.launchpad.net/bugs/221119
You received this bug
Never mind the silly question, I think I figured it out already (removed
the edgers lines from sources.list, will SSH into the desktop system
from my laptop, remove the updated packages and install them again — I
guess it's as simple as that...).
--
[i945] [gutsy, hardy, intrepid] Blank screen
** Changed in: xserver-xorg-video-intel
Status: Confirmed = Fix Released
--
[i945] [gutsy, hardy, intrepid] Blank screen and (EE) intel(0): overrun on pipe
B! on i945GM using intel driver
https://bugs.launchpad.net/bugs/221119
You received this bug notification because you are a member
Bug fixed with the latest daily build of Jaunty Jackalope: now there is
no longer the blank screen and everything works correctly, including VGA
output, LVDS and compiz.
I would like to thank Bryce Harrington and apologize for the delay in
responding.
Best regards
Roberto JD Leinardi
--
Fix for upstream bug 17292 is committed to Jaunty (and Intrepid), which
should solve this. Feel free to reopen if you continue to have
problems.
https://bugs.freedesktop.org/show_bug.cgi?id=17292
** Changed in: xserver-xorg-video-intel (Ubuntu)
Status: Triaged = Fix Released
--
[i945]
I tested again with the Jaunty daily build LiveCD from 1/27/2009 and X
still crashes upon startup. Ubuntu falls back to low-graphics mode
with the following error:
Failed to pin front buffer: Cannot allocate memory
--
[i945] [gutsy, hardy, intrepid] Blank screen and (EE) intel(0): overrun on
** Changed in: xserver-xorg-video-intel
Status: Unknown = Confirmed
--
[i945] [gutsy, hardy, intrepid] Blank screen and (EE) intel(0): overrun on pipe
B! on i945GM using intel driver
https://bugs.launchpad.net/bugs/221119
You received this bug notification because you are a member of
I tested this with the Jaunty Alpha 2 LiveCD the X still crashes during
startup because memory cannot be allocated properly. It then falls back
to low graphics mode.
--
[i945] [gutsy, hardy, intrepid] Blank screen and (EE) intel(0): overrun on pipe
B! on i945GM using intel driver
Okay, I think this bug report has strayed too much from the original bug
report.
I suspect the title of this bug report has been too misleading. overrun
on pipe B! is a very common error message. Basically, your Intel
graphics card has two pipes (called 'crtc's) through which it can feed
video
Btw, upstream is likely to want to know if this problem occurs with a
newer version of X and -intel. Perhaps the easiest way to check would
be to burn and boot a Jaunty alpha Live CD, which has newer versions of
both. You can get ISOs at http://cdimage.ubuntu.com/releases/jaunty/
Upstream may
Well, I had everything working fine (except for compiz) until yesterday's
updates. I applied all updates (as I have done with no problem for some
months) and my system is now VERY broken. I'm not even sure what brooke it,
but when I get to the login screen, as I type the first letter of my
** Summary changed:
- [gutsy, hardy, intrepid] Blank screen and (EE) intel(0): overrun on pipe B!
on i945GM using intel driver
+ [i945] [gutsy, hardy, intrepid] Blank screen and (EE) intel(0): overrun on
pipe B! on i945GM using intel driver
--
[i945] [gutsy, hardy, intrepid] Blank screen and
I am not knowledgeable enough to completely understand what the pipe A
and pipe B issues actually mean other than seeing the error, and knowing
that the chip is not receiving the appropriate timing of information. I
can offer that perhaps for those people seeing the underrun on pipe A,
and who
17 matches
Mail list logo
