Closing this bug until we get further feedback. Please be sure to first
test and confirm if this issue remains with the latest Jaunty 9.04
release and attach the previously requested information. Thanks.
http://www.ubuntu.com/getubuntu/download
** Changed in: linux (Ubuntu)
Status:
Hi Joel,
Can you attach your dmesg output when running the latest 2.6.27-7
Intrepid kernel? Thanks.
** Changed in: linux (Ubuntu)
Status: New = Incomplete
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received this bug notification
Still having same issues, running fuji p2120 with intrepid beta, latest updates
as of 10/09/08.
$ cat /proc/version_signature
Ubuntu 2.6.27-6.9-generic
$ iwconfig
lo no wireless extensions.
eth1 no wireless extensions.
wifi0 IEEE 802.11b ESSID: Nickname:
Mode:Managed Frequency:2.437
Unfortunately this bug report is being closed because we received no
response to the last inquiry for information. However, the Intrepid
Ibex 8.10 Beta release was most recently announced -
http://www.ubuntu.com/testing/intrepid/beta . If you are able to
confirm this is still an issue with this
** Changed in: linux (Ubuntu)
Status: Triaged = Incomplete
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
** Tags added: regression-release
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
The Ubuntu Kernel Team is planning to move to the 2.6.27 kernel for the
upcoming Intrepid Ibex 8.10 release. As a result, the kernel team would
appreciate it if you could please test this newer 2.6.27 Ubuntu kernel.
There are one of two ways you should be able to test:
1) If you are comfortable
I have just done a clean install of Hardy and upgraded the firmware of
my card. Still no success (my other ubuntu desktop has no problems
with it) Is it still possible to use the orinoco drivers on Hardy? They
worked for me on Dapper Edgy.
$ sudo hostap_diag wlan0
Host AP driver diagnostics
stani:
Not without compiling the drivers yourself unfortunately. I'm almost tempted to
say that if you have the expertise, your particular issue is worth reporting
upstream...
Do you know the hardware is still good (i.e. does an old LiveCD or
another OS work)?
--
Orinoco_pci affected by
stani:
I'm getting inconsistent results. I have several prism-based cards.
Two have the 1.8.2 firmware and works, except that it's slow as snot.
One is too old to have a newer firmware so it has 1.5.6 and works with WEP but
not open networks (no WPA, too old).
One is ripped from an access point
You will need stationary firmware version 1.7.0 or newer in order to get
WEP to work on prism2 cards. The linux-wlan-ng package has tools for
loading newer firmware into the card RAM (without flashing), but I don't
know how well this works for PCI cards. Generally we only recommend
linux-wlan-ng
Just for the record, the firmware on stani's card is Primary: 1.1.1
Secondary: 1.4.9. Nic ID is 0x8013.
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
@Sitsofe:
Unfortunately not:
$ /usr/bin/sudo iwlist scan
[sudo] password for stani:
loInterface doesn't support scanning.
eth1 Interface doesn't support scanning.
wifi0 No scan results
wlan0 No scan results
irda0 Interface doesn't support scanning.
--
Orinoco_pci
I'd like to know if this bug will be fixed for Hardy. Is there any more
information I can give?
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
stani:
Does using
/usr/bin/sudo iwlist scan
show anything useful?
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
** Changed in: linux (Ubuntu)
Importance: Undecided = Medium
Assignee: (unassigned) = Ubuntu Kernel Team (ubuntu-kernel-team)
Status: Incomplete = Triaged
** Changed in: ubuntu
Sourcepackagename: linux-source-2.6.24 = None
Status: New = Invalid
--
Orinoco_pci affected by
** Also affects: linux-source-2.6.24 (Ubuntu)
Importance: Undecided
Status: New
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Hi,
In the hope wireless would work again on my IBM Thinkpad X30, I just did a
fresh install of the latest Ubuntu Hardy Alpha. Unfortunately nm-applet does
not show the wireless networks.
Ubuntu boots up with a spinning progress bar (moving left and right
without progress) and hangs during ten
** Attachment added: lspci -vvn
http://launchpadlibrarian.net/12763216/lspci-vvn-stani-x30.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Attachment added: dmesg
http://launchpadlibrarian.net/12763217/dmesg-stani-x30.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
In Hardy Alpha 6 (live cd) I have no issues -- wireless networking was
functional on boot up without any configuration. Later I upgraded my
7.10 partition to 8.04 and also no trouble at all.
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received
The Hardy Heron Alpha series is currently under development and contains
an updated version of the kernel. It would be helpful if you could test
the latest Hardy Alpha release: http://www.ubuntu.com/testing . You
should be able to then test the new kernel via the LiveCD. If you can,
please
I am closing the 2.6.22 task, since that kernel doesn't even ship with
orinoco_pci drivers.
** Changed in: linux-source-2.6.22 (Ubuntu)
Status: Triaged = Invalid
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received this bug notification
** Changed in: linux-source-2.6.22 (Ubuntu)
Importance: Undecided = Medium
Assignee: (unassigned) = Ubuntu Kernel Team (ubuntu-kernel-team)
Status: New = Triaged
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received this bug
Thanks. Finally got the card detected and connection to the network
also with 128bit encryption. I stumbled on a href=/bugs/126220
title=[regression] wireless card does not work in gutsy, ma311bug
#126220/a explaining that orinoco_pci was dropped in the Gutsy
upgrade. So far as I understand,
Brent,
You should be able to add the NM-applet to the top bar. That gives a
rudimentary signal bar monitor.
Glad you got it working. I am having an occasional crash in hostap_pci
upon resume. Driver still sounds a bit unstable. Good thing is the
Ubuntu community will fix it quickly. Much better
John WIllilams: was your wireless card detected at all after upgrade?
Similar to the your case I upgraded via update manager to gutsy I had no
wireless card detection on A31p with the Prism card. Was running with
encryption using Orinoco before, and blacklists remained unchanged with
the
Got it working!
I rebooted to 2.6.17-10 and finally got NM to accept the WEP key and it
works. Mine is the IBM T30 with the Intersil Prism 2.5 pci card. So I
rebooted to 2.6.22-16 and it works there also. ??? Not sure what is
going on. On my router, I run 128 bit enc. I used the 64/128 Hex key
I upgraded from feisty to gutsy using the upgrade manager. No wireless
upon reboot on my T30 with the Prism card. It sees my access point, and
shows signal in NM but does not accept the web encryption key and will
not assign an IP address. Double checked to make sure it is correct key.
It is.
** Changed in: linux-source-2.6.17 (Ubuntu)
Assignee: (unassigned) = Ubuntu Kernel Team
** Changed in: linux-source-2.6.17 (Ubuntu)
Status: Confirmed = Triaged
** Changed in: linux-source-2.6.20 (Ubuntu)
Status: Confirmed = Triaged
--
Orinoco_pci affected by re-enabled
I hit this problem when moving from 2.6.17-10 to 2.6.17-11, and I've had
to stay on the former kernel since then.
My machine is a Thinkpad T30 (2366-92U). I had been successfuly using
the prism2_pci driver. I have attached the results of sudo lspc -vv
Please let me know if I can provide
I continue to suffer from this problem (wireless drivers stepping on
each other). In my case it's prism2_pci and hostap_pci (hostap being
preferred due to WPA support). Note that when both are loaded neither
one operates, and I have no wireless whatsoever.
The device is 1260:3873, Network
its a pity this bug hasnt been fixed for edgy yet, and very sad that it
has migrated across to feisty.
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact
Sorry!! It was my fault! NM is working ok, I didn't check the roaming
option.
On 4/21/07, Michael R. Head [EMAIL PROTECTED] wrote:
Hm... I have the same setup (T30 model 2366-97U) and NM is working here
-- I can fully browse hotspots and see the signal strength (and have for
quite a few
I've Upgraded to Feisty using 'upgrade-manager -c -d' my IBM T30 minipci card,
prism2.5 chip , removed blacklist, Reboot and no wifi network, Then blacklist:
prism2
prism2_pci
hostap
hostap_pci
And have wifi Working, but MN still half functionality. I can't see different
hotspots/signal
Hm... I have the same setup (T30 model 2366-97U) and NM is working here
-- I can fully browse hotspots and see the signal strength (and have for
quite a few releases now). The only thing is that some times the card is
a bit slow and doesn't report the scanning data fast enough. Can you
ever browse
Still fails on Feisty RC. Upgraded T30 Edgy (Prism pci card) today using
upgrade-manager -d. Asked to keep or remove blacklist. Said remove.
Reboot to no network. Re-did the blacklist of prism2_pci. Works.
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
Cards that should use the orinoco_plx driver are also affected by this
bug.
I have a 3Com Corporation 3CRWE777 PCI(PLX) Wireless Adaptor
[Airconnect] (rev 02), which is a PCMCIA to PCI adapter based card.
Similar to above descriptions, prism2_plx driver are automatically
loaded instead of the
** Attachment added: lspci -vvn output for 3Com 3CRWE777 PCI(PLX) Wireless
Adaptor
http://librarian.launchpad.net/7334028/lspci-vvn-jclarke.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received this bug notification because you are a
stani:
My network card is a Intersil Corporation Prism 2.5 Wavelan chipset (Netgear
MA311). The hostap drivers are currently broken for me (see bug #89464 ) but
the orinoco drivers seem to work well.
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You
There is also a report that the firmware had to be updated on prism
cards before scanning worked over in Bug #94885 .
stani:
What is the output of
dmesg | grep -i firm
shortly after boot?
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received
** Changed in: linux-source-2.6.20 (Ubuntu)
Target: ubuntu-7.04 = None
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
Stani, have you tried blacklisting the prism2 *and* the orinoco drivers?
I added these to /etc/modprobe.d/blacklist on my T30 and have wireless
working (some nits, but it works, WPA and all):
blacklist orinoco
blacklist orinoco_pci
blacklist hermes
blacklist p80211
blacklist prism2_pci
If you
Tormod,
It does not seem to be a network-manager problem. I killed the network manager
and restarted network but it didn't help
Brett,
I tried it before and now again with your blacklist so that the hostap gets
loaded, but it doesn't work unfortunately. Before it was working, so I prefer
not
I reinstalled Ubuntu feisty on my laptop and did a dist-upgrade. The
wireless device now shows up in systemnetwork without blacklisting but
the network-manager doesn't show any available wireless network.
Blacklisting the prism2 or hostap drivers doesn't help either. Anyone
has a solution to get
Stani, I think that might be a network-manager problem, see bug #82335.
--
Orinoco_pci affected by re-enabled prism2 drivers
https://bugs.launchpad.net/bugs/63989
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs
** Changed in: linux-source-2.6.20 (Ubuntu)
Assignee: Ben Collins = Ubuntu Kernel Team
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Attached is a tar file containing output requested. I un-blacklisted the
prism2_pci captured the output from lspci -vv and lspci -vvn than
blacklisted the prism_pci, rebooted and captured the output again.
tar vtf lspic_output-jsteinman.tar
-rw-r--r-- jsteinman/jsteinman 6545 2007-03-15 11:30
I think we've provided the info needed at this point.
** Changed in: linux-source-2.6.20 (Ubuntu)
Status: Needs Info = Confirmed
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Attachment added: lspci -vv thinkpad x30
http://librarian.launchpad.net/6780824/lspci%20-vv%20thinkpad%20x30
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Attachment added: lspci -vvn thinkpad x30
http://librarian.launchpad.net/6780825/lspci%20-vvn%20thinkpad%20x30
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
I had the same problem with a Thinkpad X30. By blacklisting I got it
working again:
blacklist prism2
blacklist prism2_pci
blacklist hostap_pci
blacklist hostap
Hopefully this get fixed by default in Feisty.
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
Netgear MA311 here on Feisty. Got my card working just by blacklisting
prism2_pci and prism2. Couldn't figure out how to get the prism2 module
working to blacklist the other ones instead. I'm too used to the
interfaces file. =)
--
Orinoco_pci affected by re-enabled prism2 drivers
Ben:
It's worth noting that some cards will work work with all three drivers.
However, the prism2_pci drivers can only be configured using their own
special utilities (I don't believe they got around to supporting
iwconfig and friends). The hostap_pci drivers used to work as well as
the orinoco
** Attachment added: lspci-vv on a Thinkpad X22
http://librarian.launchpad.net/6612582/lspci-vv-mazugrin.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Attachment added: lspci-vvn on a Thinkpad X22
http://librarian.launchpad.net/6612583/lspci-vvn-mazugrin.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
We seem to have conflicting reports on this range of chipsets in that
prism2_pci, hostap_pci and orinoco_pci are all said to work better for
different ones.
Can everyone affected please attach (do not paste into comment) the
output of lspci -vv and lspci -vvn, make sure to name the file
something
** Attachment added: Output of lscpi -vvn
http://librarian.launchpad.net/6494082/lspci-vvn-ChristofferSorensen.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Attachment added: lspci -vv on a ThinkpadT30
http://librarian.launchpad.net/6494143/lspci-vv-MichaelRHead-ThinkpadT30.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Attachment added: lspci -vvn on a ThinkpadT30
http://librarian.launchpad.net/6494144/lspci-vvn-MichaelRHead-ThinkpadT30.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Attachment added: Output of lscpi -vv
http://librarian.launchpad.net/6494076/lspci-vv-ChristofferSorensen.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Attachment added: lspci-vv-markrian
http://librarian.launchpad.net/6494193/lspci-vv-markrian.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Attachment added: lspci-vvn-markrian
http://librarian.launchpad.net/6494194/lspci-vvn-markrian.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Attachment added: Output of lspci -vv and lspci -vvn
http://librarian.launchpad.net/6494351/lscpi-vv-sitsofe.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Attachment added: lscpi-vvn-JasonVenkiteswaran-CompaqPresario2100
http://librarian.launchpad.net/6495058/lscpi-vvn-JasonVenkiteswaran-CompaqPresario2100.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
** Attachment added: lscpi-vv-JasonVenkiteswaran-CompaqPresario2100
http://librarian.launchpad.net/6495057/lscpi-vv-JasonVenkiteswaran-CompaqPresario2100.txt
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
This continues to be a problem in feisty. If prism2_pci isn't
blacklisted somewhere in /etc/modprobe.d, the prism2_pci driver loads,
takes over my hardware and prevents orinoco_pci or hostap_pci from
controlling the hardware. I must manually sudo modprobe -r prism2_pci
sudo modprobe -r
If prism2 is enabled, the prism2_cs driver gets loaded when orinoco_pci
cards are used.
The wireless connection does work with this driver.
The correct driver is orinco_pci.
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
** Tags added: edgy-regression
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I found that by blacklisting prism2_cs in /etc/modprobe.d/blacklist my
WPC11 works again with Herd 3.
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
prism2_cs has been disabled for the next feisty upload - we'll look at
the _pci situation. Could people please describe the exact way in which
it doesn't work?
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
This problem still affects Feisty Fawn Herd 2.
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
This affects 2.6.19 as well. Is it possible to fix this for feisty?
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Mark Florian:
i got the exact same network card as you! can you please say what commands you
run? As those is not working with mine...
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
$ sudo rmmod prism2_pci hostap_pci hostap orinoco_pci orinoco hermes
$ sudo modprobe orinoco_pci
But a better solution is to create a file like in /etc/modprobe.d
/blacklist-for-ma311 and put the following lines in it:
# This makes sure only orinoco/_pci gets loaded for my prism2.5 card
** Changed in: linux-source-2.6.17 (Ubuntu)
Importance: Undecided = Medium
Target: None = edgy-updates
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Allow me to reconfirm on an older Compaq Presario 2100:
Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
$ sudo modprobe -r orinoco_pci
$ sudo modprobe -r hostap_pci
$ sudo modprobe -r prism2_pci
$ sudo modprobe orinoco_pci
Works like a charm after this in edgy. The
Bug 62685 was about a problem with the hostap driver. That problem being
that it no longer works. This problem is not connected to that one.
There is something in common, though. In order to get the hostap driver
to drive the hardware, orinoco must be blacklisted. However, once
orinoco (and
*** This bug is a duplicate of bug 62685 ***
** This bug has been marked a duplicate of bug 62685
[Edgy regression] Hostap driver for PRISM2 wifi card not working any more
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
Just found this after an upgrade the other day too. In the short term
you can probably add prism2_pci to /etc/modprobe.d/blacklist if you are
already using orinoco_pci.
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
This is in fact a duplicate of Bug 62685 (only difference is that
orinoco is being masked rather than hostap)
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
** Bug 63508 has been marked a duplicate of this bug
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Me too - Netgear MA311 wireless card, got to do the whole rmmod/modprobe
malarkey.
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Similar here, with the same wireless card. I haven't tried these steps
yet, but I get wireless with 2.6.17-8, and none with 2.6.17-10.
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
My T30 has a MiniPCI-based wireless card and I have to do the same to
get a functioning wireless connection.
** Changed in: linux-source-2.6.17 (Ubuntu)
Status: Unconfirmed = Confirmed
--
Orinoco_pci affected by re-enabled prism2 drivers
https://launchpad.net/bugs/63989
--
ubuntu-bugs
85 matches
Mail list logo
