Is it possible there has been a regression of this in the 2.6.20-16
update that was just released? I'm experiencing nearly identical
problems as reported in this thread.
--
Crash from ide_pci from generic.ko for jmicron controllers
https://bugs.launchpad.net/bugs/84964
You received this bug
This is my adventure:
i installed ubuntu feisty 7.04 with noapic and irqpoll options and i had a
problem when partitioning... i couldn't do a manual partition, so i installed
with the automatic partition. After the installation, when the system boot, i
have a lot of errors on the ATA and the
I have the same problem explained here on a abit ab9 with Intel Core 2 duo
(e6320). The exact problem of Daniel Matysiak. Please, if you need more info i
will be very pleased to give it. It's a very big problem for me since i only
use Ubuntu as O.S. and i have a new PC completely stopped due to
Regarding my post on 2007-04-14, just to inform that the recently downloaded
feisty-desktop-i386.iso from the 15-Apr-2007 with kernel 2.6.20-15 (as written
in manifest) fails with exactly the same simptoms as written on previous mails.
In my humble opinion, this bug is NOT fixed.
I suppose it's
I had a similar problem installing from the Feisty LiveCD using an Asus
P4S333-VM motherboard. This motherboard does not have any SATA
functionality, nor do I have any SATA plugin cards. The only cards I
have installed are a Soundblaster Live 5.1 and an Asus N6200 AGP card.
The installation went
I think I may have the same problem, I have a HP Compaq nc8430 laptop (precise
hw config at the end). I've been running 6.10 ok, but trying clean 7.04 install
crashes with the following message:
--
BusyBox v1.1.3 (Deian 1:1.1.3-3ubuntu3) Built-in shell
I have posted about a similar problem on bug #96084. Attached is the
error I get when trying to begin the Feisty installation (I have
disabled my JMicron controller and the same error occurs). Of course,
the installation does not proceed. I too have an Intel Core 2 Duo
(E6600), abit AB9 pro
Aaron!
Me too.
I have a 965P-DS3, E6300 and ATI 1950GT.
I update some files yesterday. And reboot system. But did not boot.
Help~~!!
--
Crash from ide_pci from generic.ko for jmicron controllers
https://bugs.launchpad.net/bugs/84964
You received this bug notification because you are a
@simdoly
Hi
As soon as you turn your PC on. look for the count down at the lower
left of the screen.
Press Esc and pick the oldest kernel.
Once you have booted in ubuntu run the update again and i should down
load 2.6.20-15 and that might fix the problem.
For now, I have gone back to 6.10
Hi there
I have a 965P-DS3 with a E6300.
2.6.20-14 - did not boot.
2.6.20-15 - does boot !!!
--
Crash from ide_pci from generic.ko for jmicron controllers
https://bugs.launchpad.net/bugs/84964
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact
still got the same problem with http://cdimage.ubuntu.com/daily/current
/feisty-alternate-i386.iso from 10 April.
Gigabyte 965P-S3 , trying to install it on IDE HDD connected to JMicron
modprobe is showing some errors and i got dropped to busybox sh
it complains about missing /dev/root/dev or
I installed and booted the 2007-04-07 build without any problem. One
SATA HD on ICH8 and one on the Jmicron set as IDE. Asus P5B-E mobo.
Grub seems to get confused which mbr to install in, it seems to choose
the ide (/dev/sdb) by default. Fixed by specifying the /dev/sda.
Thanks for the effort.
/dev/sdb is the SATA drive. See if you have /dev/hda which would be your
IDE drive.
On 4/9/07, Ariyau [EMAIL PROTECTED] wrote:
I installed and booted the 2007-04-07 build without any problem. One
SATA HD on ICH8 and one on the Jmicron set as IDE. Asus P5B-E mobo.
Grub seems to get confused
I confirm 2.6.20-13 now boot on my machine!
Kudos to Ben Collins .
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
The fix also does not work perfectly for me (Abit AB9 Pro board with
Jmicron and ICH8 controllers).
I did manage to install the daily build of April 1th with the
pci=biosirq option in the bootloader. Feisty boots now, but only with
pci=biosirq noapic nolapic acpi=of options in grub.
--
Crash
Just wanted to say, I get the same issue with two sata drives, the
daily and any fisty cd wont load. edgy is no problem.
--
Crash from ide_pci from generic.ko for jmicron controllers
https://bugs.launchpad.net/bugs/84964
You received this bug notification because you are a member of Ubuntu
Ok, regarding my last post i have now fixed it by blacklisting intel_agp
and adding irqpoll to the boot line, and fiddling with the JMicron and
ICH8 settings in the bios.
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
I made a mistake and did a clean install of daily build 29.03. Now i can
boot only if i disable jmicron controller in bios but then i can't use
dvd-rw. When i boot with jmicron enabled i have error 17: cannot mount
selected partition. Can anyone suggest what should i do to fix this.
[core2duo,
takai and others still having problems with sata complaining with
xfermode, you may be interested by this bug report :
https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/90715
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
Today, I tried install daily build 30.03.2007
The installer screen can't visible.
Problem still not fixed.
Intel Core 2 Duo 6300
GIGABYTE GA-965P-DS3
ATI Radeon X1950GT / 512 MB GDDR2
Samsung DVD-Multi SH-S183L
22 Wide monitor
Sorry, I poor at English.
--
Crash from ide_pci from generic.ko
I am having this issue again with the 20070329 nightly build. Main issue
comes post-install, with the SATA controller (either JMicron or ICH8)
not being able to set xfermode properly.
Hw: Asus P5B-Deluxe, 500gb SATA (connected on either JMicron or ICH8)
--
Crash from ide_pci from generic.ko for
Fixed for me too, on the current daily.
In regards to my last post, seems like the new kernel was not in the
disc by then, which would explain the results.
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
Latest kernel has fixed this for me on an Asus P5B VM, original reprt
was bug 86156
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Thanks for your considerate assistance.
I get ISO image from http://cdimage.ubuntu.com/daily-live/current;, and
burn it to a CD.
Then boot computer from this CD. And I tried install ubuntu 7.04.
First time, install progress is look like success. But after select
language(Korean), the moniter
I have two systems with a JMicron-controller. First one has an Asus
Commando motherboard, and it works perfectly as of 2.6.20-13.
The second one with Abit AB9 still does not work however. I get the same
messages as apjaworski, i.e., it complains about a timeout with ata5 and
not being able to set
I confirm that Asus P5B-VM (with ICH8 and JMicron) now boots the 0326
amd64 live cd.
I tested with the RAID option for JMicron. Remains to be seen whether
the AHCI and BASIC options work too.
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
Correction to my previous comment above (#114) - I meant that 0327(.0)
build was OK.
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
0327 build amd64 image works fine on ASUS P5B-E mobo (with ICH8 and
JMicron), Core2Duo and SATA drives. Note I did not try RAID options in
these SATA drives yet, they are used as IDE device for now. Sata drives
are connected to ICH8 controller and CD ROM connected to JMicron
controller.
Thanks
Confirmed in the 27th daily build, kernel 2.6.20.13 :D
Great work guys.
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I can now boot on a Gigabyte GA-965G-DS3 using 2.6.20-13.21.
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Hi,
Since I switched to Feisty i've had this problem too.
I have IDE Drives dvd, and an integrated S-ATA controlller that I do
not yet use and cannot deactivate in BIOS.
I have not yet tried any of the boot options specified, I will inform
you when i test reboot with new kernel.
A Question.
The bug is fixed. You still can't boot a daily build if it doesn't have
included the 2.6.20-13 kernel. You can check if the fix is included by
checking the cd's manifest:
For example:
feisty-desktop-amd64.manifest
or
feisty-desktop-i386.manifest
It's useless to download the latest image for
@Gheorge: Heh, it took me 5 minutes to realize that you mean the feisty-
desktop-amd64.manifest on the website and not a file in the iso
If you mean to look at the linux-generic line, 0326 has 2.6.20.12.9
So it seems we have to wait one more day (unless there's a 0326.1
under way) Of
i cannot reproduce the bug anymore with linux-image-2.6.20-13-generic.
Fixed.
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Is there any way i can merge the new kernel (where to download?) into
the iso of the daily build i currently have? Instead of waiting for days
for it to be included in the next release.
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
I've just upgrade to 2.6.20-13.21 a few minutes ago and it works perfect
also on my GA-965P-S3 - Intel P965+ ICH8 chipset (JMicron controller)
motherboard. Thank you!
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
Another positive result. My Gigabyte 965GM-S2 now boots 2.6.20-13 as
well.
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
So what do i do, now that the bug has been fixed, if i want to do a
clean install of feisty beta?
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
@Bane
you have to download the daily built found here:
http://cdimage.ubuntu.com/daily/current/
although you will often find only the alternate install there and they very
often they don't keep track of the image size 700megs. i also need a clean
install because i smashed my system with an
I can confirm the fix. Successfully updated from Kubuntu 6.10 to Kubuntu
7.04 manually according to this method
https://help.ubuntu.com/community/FeistyUpgradesManual
Asus P5B Deluxe, Jmicron IDE hdd.
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
Does not work for me (Asus P5B)
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
ok i retract my initial post ^above.
it works!
-- asus p5b deluxe.
thanks for the fix!
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Not good. I have the same motherboard and was planning to upgrade. :(
Can anyone with a Gigabyte 965P-S3 confirm?
JoseStefan wrote:
/daily-live/20070325/feisty-desktop-i386.iso
cfd65d5071b23584306c7b0533b5a226 *feisty-desktop-i386.iso
Motherboard: Gigabyte GA-965P-S3 (rev 1.0, bios F8)
Still broken in the 25th daily build.
asus p5b-e mobo.
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
** Changed in: linux-source-2.6.20 (Ubuntu)
Status: Fix Committed = Fix Released
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
/daily-live/20070325/feisty-desktop-i386.iso
cfd65d5071b23584306c7b0533b5a226 *feisty-desktop-i386.iso
Motherboard: Gigabyte GA-965P-S3 (rev 1.0, bios F8)
Still does not work. However, herd-3 daily-live works.
I get the busy box. If you know of anyway of dumping the boot text into
a file, while
yeah, still not working for me either;
--daily build march 25 2007
asus p5b deluxe.
...the same busy box error.
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
Yes...2.6.20-13 works !!
Asus p5b de luxe jmicron (ahci)
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
I get the same errors as in this thread but on an Acer Travelmate 270
laptop. lspci doesn't have any jMicron controller listed and I'm fairly
certain from the hardware spec that my laptop doesn't have that
controller. What information can I provide that would be helpful to fix
this?
--
Crash
Latest Live CD Ubuntu 7.04 Feisty Fawn - Beta amd64 (20070322) does not boot
correctly. I have reported this in the Iso test tracker:
https://bugs.launchpad.net/ubuntu-iso-tests/+bug/93121/comments/31
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
@Ben Collins:
Here are digital photos of all the screens my scrollback buffer held with quiet
and splash turned off. This is with this morning's daily build:
feisty-desktop-i386.iso 22-Mar-2007 07:43 699M Desktop CD for PC
(Intel x86) computers (standard download)
Kernel reports
(Does launchpad eat comments? I posted this earlier today and it
dissapeared. Here it is:)
The 2 last picasaweb screenshots posted by MightyE confirm my
observation regarding a floppy problem (see comment 94). I was unable to
see the I/O dev fd0 error because I was booting from the live cd.
Ben
I experience similar problems: 2.6.20-6 works, all subsequent kernels
fail at startup. My motherboard is Gigabyte GA-965P-DS3
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
FYI my MoBo is Gigabyte GA-M59SLI-S5 (
http://www.gigabyte.com.tw/Products/Motherboard/Products_Spec.aspx?ClassValue=MotherboardProductID=2302ProductName
=GA-M59SLI-S5 ) I use the nvraid in striped mode.
--
Crash from ide_pci from generic.ko for jmicron controllers
** Summary changed:
- modprobe abnormal exit - Kernel 2.6.20-8/9/10/11/12 does not boot
+ Crash from ide_pci from generic.ko for jmicron controllers
--
Crash from ide_pci from generic.ko for jmicron controllers
https://launchpad.net/bugs/84964
--
ubuntu-bugs mailing list
Mr. Collins: I have just done what you said. I got the following.
[1.716365] [f8859090] generic_init_one+0x0/0xc0 [generic]
[1.716427] [c01fb2f6] pci_device_probe+0x56/0x80
[1.716488] [cc0257316] really_probe+0x66/0x190
[1.716549] [c0257489] driver_probe_device+0x49/0xc0
[1.716675] [cc014416d]
56 matches
Mail list logo
