[Bug 712392] Re: qemu-img convert blocks other tasks
I still haven't had the chance to test this properly. (server is in production), but the problem manifested itself by accident. So, here's a little bit of information. I started downloading (rsync) a qcow image from the file server and noticed it was bit slow. 14MB/sec max - 790kB/s after a while. This is writing to a simple single sata disk. Then the virtual machines started to become unresponsive and I had to interrupt the download, or the server would have gone down. It's not memory pressure. Memory was at +/- 900MB (of 8GB). Only 2 small virtual machines were running, BUT there was a snapshot present. It's not qemu-img that causes the panics. Any I/O will do it. Then the famous messages start appearing in kern.log: [149164.740056] INFO: task kvm:21354 blocked for more than 120 seconds. [149164.740294] echo 0 /proc/sys/kernel/hung_task_timeout_secs disables this message. [...] [149164.740595] [8155d557] __mutex_lock_slowpath+0x107/0x190 Restarting the download without lvm snapshot present yields: - 11MB/s, but more or less constant. - Running virtual machines are responsive as ever - No errors in kern.log -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in Ubuntu. https://bugs.launchpad.net/bugs/712392 Title: qemu-img convert blocks other tasks -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790145] Re: kvm husb: ctrl buffer too small
I've modified the source code and built deb package. Error message goes away, but for some other reason XP doesnt see PDA. dmesg: [85011.628047] usb 2-7: new full speed USB device using ohci_hcd and address 16 [85011.854203] usb 2-7: configuration #1 chosen from 1 choice [85012.087034] rndis_host 2-7:1.0: RNDIS_MSG_QUERY(0x00010202) failed, -47 [85012.100755] eth1: register 'rndis_host' at usb-:00:0b.0-7, RNDIS device, 80:00:60:0f:e8:00 [85012.153171] udev: renamed network interface eth1 to eth2 [85023.312024] eth2: no IPv6 routers present [85074.776006] eth2: unregister 'rndis_host' usb-:00:0b.0-7, RNDIS device [85076.512050] usb 2-7: reset full speed USB device using ohci_hcd and address 16 [85077.760991] rndis_host 2-7:1.0: RNDIS_MSG_QUERY(0x00010202) failed, -47 [85077.774824] eth1: register 'rndis_host' at usb-:00:0b.0-7, RNDIS device, 80:00:60:0f:e8:00 [85077.774918] eth1: unregister 'rndis_host' usb-:00:0b.0-7, RNDIS device [85087.128052] usb 2-7: reset full speed USB device using ohci_hcd and address 16 [85087.887995] rndis_host 2-7:1.0: RNDIS_MSG_QUERY(0x00010202) failed, -47 [85087.902959] eth1: register 'rndis_host' at usb-:00:0b.0-7, RNDIS device, 80:00:60:0f:e8:00 [85087.903304] eth1: unregister 'rndis_host' usb-:00:0b.0-7, RNDIS device [85099.604546] usb 2-7: reset full speed USB device using ohci_hcd and address 16 [85100.419995] rndis_host 2-7:1.0: RNDIS_MSG_QUERY(0x00010202) failed, -47 [85100.434941] eth1: register 'rndis_host' at usb-:00:0b.0-7, RNDIS device, 80:00:60:0f:e8:00 [85100.435038] eth1: unregister 'rndis_host' usb-:00:0b.0-7, RNDIS device [85103.324060] usb 2-7: reset full speed USB device using ohci_hcd and address 16 [85104.438991] rndis_host 2-7:1.0: RNDIS_MSG_QUERY(0x00010202) failed, -47 [85104.453991] eth1: register 'rndis_host' at usb-:00:0b.0-7, RNDIS device, 80:00:60:0f:e8:00 [85104.454092] eth1: unregister 'rndis_host' usb-:00:0b.0-7, RNDIS device [85105.156066] usb 2-7: reset full speed USB device using ohci_hcd and address 16 [85105.905993] rndis_host 2-7:1.0: RNDIS_MSG_QUERY(0x00010202) failed, -47 [85105.919937] eth1: register 'rndis_host' at usb-:00:0b.0-7, RNDIS device, 80:00:60:0f:e8:00 [85105.920039] eth1: unregister 'rndis_host' usb-:00:0b.0-7, RNDIS device [85415.007924] usb 2-7: USB disconnect, address 16 So the original bug is fixed with the patch above. :-) -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in Ubuntu. https://bugs.launchpad.net/bugs/790145 Title: kvm husb: ctrl buffer too small -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 789097] Re: tdb2.so undefined symbol: dyn_get_STATEDIR (source code typo)
samba_3.5.8~dfsg-1ubuntu2.2 And the previous version was the same. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in Ubuntu. https://bugs.launchpad.net/bugs/789097 Title: tdb2.so undefined symbol: dyn_get_STATEDIR (source code typo) -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Blueprint server-o-boot-experience] Server boot experience
Blueprint changed by Colin Watson: Whiteboard changed: Status: spec drafting, work items are still in flux Work Items: - [cjwatson] turn off quiet for server: TODO + [cjwatson] turn off quiet for server: DONE [jamesodhunt] allow upstart visualization tool to filter out jobs/events that aren't in existence: TODO [clint-fewbar] define/document a simple job/alias/event for networking up, for generic network services: TODO define/document a simple job/alias/event for system has booted, for /etc/rc.local type behavior: TODO improve start on for cron and other services (start when all user info available): TODO update Upstart Cookbook with abstract jobs and full exposition of how to define optimal start on and stop on for a new job: TODO [clint-fewbar] file bugs on services that don't respect single user mode appropriately: TODO [clint-fewbar] automated testing for single to multiuser: TODO [clint-fewbar] add init-checkconf rule to lintian for upstart jobs: TODO need to measure boot speed difference between sourcing /etc/default files, and not: TODO N/A work: define/document a simple job/alias/event for local filesystems are up, for local services -- already exists, local-filesystems define/document a simple job/alias/event for network filesystems are up, for network filesystem services - already exists, remote-filesystems Ideas * Serialize for debugging * Logging of job output (ideas also in upstart bug list) * Fencing (well defined sync points for boot) http://upstart.at/wp-content/uploads/2011/03/initctl2dot.png * as late as possible -- grub common one example for init.d * Generic Jobs (network-services, etc) * Document best practice in /usr/share/doc/upstart/examples and man page * Delay until all network interfaces are up * Default to always showing plymouth upstart bridge output * runlevel 1 and back to 2 doesn't work right * useful for emergency maintenance recovery * consider adding call to init-checkconf to lintian rule to ensure job config syntactically valid * clean-up behaviour of single-user mode * /etc/default/* - what to do Actions: -- Server boot experience https://blueprints.launchpad.net/ubuntu/+spec/server-o-boot-experience -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790572] [NEW] mysqld randomly crashes on SHOW ENGINE INNODB STATUS
Public bug reported: Binary package hint: mysql-server-5.1 Ubuntu Version: 10.04 LTS mysql-server-5.1 version: 5.1.41-3ubuntu12 (AFAIK the last one) The crash happens when using some tools that does SHOW ENGINE INNODB STATUS queries like the mighty innotop. A fix and the detailed description of the issue can be found on the mysql bug tracker: http://bugs.mysql.com/bug.php?id=38883 The fix has been incorporated in the 5.1.42 release of mysql. This issue is critical for production servers running mysql, since innodb cannot be monitored which is a huge problem for production servers! ** Affects: mysql-5.1 (Ubuntu) Importance: Undecided Status: New ** Tags: mysql-server mysqld -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to mysql-5.1 in Ubuntu. https://bugs.launchpad.net/bugs/790572 Title: mysqld randomly crashes on SHOW ENGINE INNODB STATUS -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 787551] Re: ntpdate 4.2.6p2@1.2194-o: no server suitable for synchronization found - works with 4.2.4p8@1.1612-o
Can confirm this doesn't work in Natty, but does in Lucid. sudo ntpdate 0.pool.ntp.org 31 May 12:14:34 ntpdate[7104]: no server suitable for synchronization found Is 4.2.6p3 due to be uploaded into Natty (or backports)? -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to ntp in Ubuntu. https://bugs.launchpad.net/bugs/787551 Title: ntpdate 4.2.6p2@1.2194-o: no server suitable for synchronization found - works with 4.2.4p8@1.1612-o -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790661] [NEW] nova-network should depend on dnsmasq and bridge-utils
Public bug reported: Trying to use nova-network on an isolated node... To my surprise I got errors because dnsmasq and bridge-utils were missing. These are both used directly by nova-network so we should require them in the packaging. ** Affects: nova (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/790661 Title: nova-network should depend on dnsmasq and bridge-utils -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790661] Re: nova-network should depend on dnsmasq and bridge-utils
** Changed in: nova (Ubuntu) Status: New = Fix Committed -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/790661 Title: nova-network should depend on dnsmasq and bridge-utils -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790661] Re: nova-network should depend on dnsmasq and bridge-utils
** Branch linked: lp:~openstack-ubuntu- packagers/ubuntu/oneiric/nova/ubuntu -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nova in Ubuntu. https://bugs.launchpad.net/bugs/790661 Title: nova-network should depend on dnsmasq and bridge-utils -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790673] [NEW] package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: el subproceso instalado el script post-installation devolvió el código de salida de error 1
Public bug reported: Binary package hint: bind9 Updating the package through the gestures did not get the package updated ProblemType: Package DistroRelease: Ubuntu 10.04 Package: bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 ProcVersionSignature: Ubuntu 2.6.32-29.58-generic-pae 2.6.32.28+drm33.13 Uname: Linux 2.6.32-29-generic-pae i686 NonfreeKernelModules: nvidia Architecture: i386 Date: Tue May 31 08:35:19 2011 ErrorMessage: el subproceso instalado el script post-installation devolvió el código de salida de error 1 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) SourcePackage: bind9 Title: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: el subproceso instalado el script post-installation devolvió el código de salida de error 1 ** Affects: bind9 (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 lucid -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to bind9 in Ubuntu. https://bugs.launchpad.net/bugs/790673 Title: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: el subproceso instalado el script post-installation devolvió el código de salida de error 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790673] Re: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: el subproceso instalado el script post-installation devolvió el código de salida de error 1
-- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to bind9 in Ubuntu. https://bugs.launchpad.net/bugs/790673 Title: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: el subproceso instalado el script post-installation devolvió el código de salida de error 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Blueprint server-o-xen-host] Improve Ubuntu as an Xen host.
Blueprint changed by Chuck Short: Whiteboard changed: Work Items: [zulcss] Sync Xen 4.1 from Debian Unstable: DONE [zulcss] Sync xen-common from Debian Unstable: DONE [zulcss] Update xen dependencies for migration between xen-3.3 to xen-4.1: INPROGRESS Check for upstream bug fixes that has not made it into debian yet: TODO [smb] Turn on dom0 kernel support in -server kernel: DONE - Write MIR for libxen4 to replace libxen3 in main: TODO - Replace libxen3 dependency with libxen4 in libvirt: TODO + Write MIR for libxen-devel to replace libxen3 in main: TODO Test build changes for libvirt with libxen-devel: TODO Remove xen-3.3 from the archive: TODO Remove ubuntu-xen-server from archive: TODO Remove ubuntu-xen-desktop from archive: TODO Update xenner to 0.48: TODO Test xen booting PAE on i386 without libvirt: TODO Test xen booting on amd64 without libvirt: TODO Test xen PAE on i386 with libvirt: TODO Test xen on amd64 with libvirt: TODO Test xen hvm CD install on i386: TODO Test xen hvm CD install on amd64: TODO Test xen-tools to make sure that it works with xen 4.1: TODO Test live-helper to see if it works with xen 4.1: TODO Create a small xen meta package to make xen install easier: TODO -- Improve Ubuntu as an Xen host. https://blueprints.launchpad.net/ubuntu/+spec/server-o-xen-host -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 688464] Re: Wrong default path for kpropd.acl in kpropd man page
This bug was fixed in the package krb5 - 1.9+dfsg-1ubuntu1 --- krb5 (1.9+dfsg-1ubuntu1) oneiric; urgency=low * Merge from debian unstable. Remaining changes: - Build for multiarch, with pre-depends on multi-arch support virtual package. - Add Breaks: on old versions fo external packages (i.e., ssd) using /usr/lib/krb5 due to the path tranisition. krb5 (1.9+dfsg-1) unstable; urgency=low * New upstream version * Pull in krb5 1.9 branch as of 03/16/2011 - Include updates in 1.8.3+dfsg-4, 1.8.3+dfsg-5, 1.8.3+dfsg-6 - Include fixes for trace logging * Since Debian does not and will not ever build with edirectory support, remove documentation of edirectory commands from the man page. Closes: #580502 * Includes IPv6 support for kadmind, Closes: #595796 * Upstream 1.9 supports hooks for password change and synchronization, Closes: #588968 * LDAP now supports stash creation after db cretaion, Closes: #484808 * Krb5 1.9 supports including files from krb5.conf, Closes: #429692 krb5 (1.9+dfsg~beta2-1) experimental; urgency=low * New upstream release * Fix default location of kpropd.acl in kpropd.M (LP: #688464) * Ignore PACs without a server signature generated by OS X Open Directory rather than failing authentication, Closes: #604925 * New exported API: krb5_tkt_creds_get krb5 (1.9+dfsg~beta1-1) experimental; urgency=low * New upstream release * No longer use symbols files for libkadm5 ad libkdb5: these libraries change very rapidly and tend to change soname each major release. Symbols files will be introduced if they make sense again. * Update symbols for libkrb5-3: note that several internal functions have disappeared. These functions were not part of the public ABI which remains stable * Update library package names based on soname changes krb5 (1.8.3+dfsg-6) unstable; urgency=low * Fix double free with pkinit on KDC, CVE-2011-0284, Closes: #618517 * Updated Danish debconf translations, thanks Joe Dalton, Closes: #584282 -- Chuck Short zul...@ubuntu.com Mon, 02 May 2011 16:23:50 +0100 ** Changed in: krb5 (Ubuntu) Status: Triaged = Fix Released ** CVE added: http://www.cve.mitre.org/cgi- bin/cvename.cgi?name=2011-0284 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to krb5 in Ubuntu. https://bugs.launchpad.net/bugs/688464 Title: Wrong default path for kpropd.acl in kpropd man page -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 785668] Re: bonding inside a bridge does not update ARP correctly when bridged net accessed from within a VM
Hello, Now I am dazed and confused (and trying to continue) I have tested most of the combination of bonding modes with appropriate switch settings and here is what I get : Bonding modeswitch configurationresult(ping from Container) With STP == balance-rr two port trunked OK balance-rr No trunkingNOK OK balance-alb No trunkingOK balance-tlb No trunkingOK 802.3ad LACP dynamic trunk OK balance-xor two port trunked OK balance-xor No trunkingNOK NOK I could swear that I had tested -alb and -tlb with negative results. So apparently, the STP workaround is not required with proper switch configuration. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in Ubuntu. https://bugs.launchpad.net/bugs/785668 Title: bonding inside a bridge does not update ARP correctly when bridged net accessed from within a VM -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 723840] Re: krb5-1.8 fails to verify MS PAC Checksum when AES 256 is used
This should be fixed in oneiric now. ** Changed in: krb5 (Ubuntu) Status: Fix Committed = Fix Released ** Also affects: krb5 (Ubuntu Lucid) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to krb5 in Ubuntu. https://bugs.launchpad.net/bugs/723840 Title: krb5-1.8 fails to verify MS PAC Checksum when AES 256 is used -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
Re: [Bug 712392] Re: qemu-img convert blocks other tasks
Thanks for the info, Alvin. So I wonder if we could reproduce this without qemu, simply creating two LVM partitions, one with a snapshot, with both originals mounted, rsyncing to the one while trying to get something done (maybe a slower rate-limited rsync) in the other. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in Ubuntu. https://bugs.launchpad.net/bugs/712392 Title: qemu-img convert blocks other tasks -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790145] Re: kvm husb: ctrl buffer too small
Thanks very much for the patch. Do you have any idea what is still going wrong? The patch is worth SRUing in any case, but if a pair of patches together makes it fully work, then I'd prefer to handle them together ** Changed in: qemu-kvm (Ubuntu) Status: Incomplete = Triaged -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in Ubuntu. https://bugs.launchpad.net/bugs/790145 Title: kvm husb: ctrl buffer too small -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790166] Re: package samba-common-bin 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2
pedro@pedro-laptop:~$ ls -al /var/lib/dpkg/alternatives/nmblookup -rw-r--r-- 1 root root 146 2011-05-03 09:49 /var/lib/dpkg/alternatives/nmblookup -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in Ubuntu. https://bugs.launchpad.net/bugs/790166 Title: package samba-common-bin 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Blueprint server-o-puppet-integration] Ubuntu Server Puppet Integration
Blueprint changed by Robbie Williamson: Whiteboard changed: Work Items: Package Puppet 2.7: TODO Package Puppet dashboard (on mysql/apache): TODO Package modules: TODO [negronj] Make/package current orchestra modules to function without orchestra provisioning: TODO Puppet Modules: [negronjl] apache: DONE [negronjl] puppet-apt helper: DONE [negronjl] debconf helper module: DONE [negronjl] distcc: DONE [negronjl] gearman: DONE [negronjl] glusterfs: DONE [negronjl] hadoop: DONE [negronjl] haproxy ( with apache and tomcat integration ): DONE [negronjl] mongodb: DONE [negronjl] mpi ( mpich2 ): DONE [negronjl] mysql: DONE [negronjl] tomcat ( tomcat6): DONE Orchestra modules needed: rsyslog: TODO nagios: TODO cobbler: TODO bzr/git: TODO fs creation/management: TODO jenkins (master and slave): TODO ha cluster (drbd, pacemaker, corosync, cman): : TODO kvm (host and guest?): TODO LXC: TODO Xen: TODO [gandelman-a] OpenStack: TODO Common modules needed: Mail server: TODO LAMP stack: TODO SSH: TODO samba: TODO DNS: TODO PostgreSQL: TODO Print server ( cups ): TODO rsyslog: TODO Hadoop: TODO Eucalyptus: TODO - Openstack: - * [gandelman-a] Nova, single server: TODO - * [gandelman-a] Nova, multi-server: TODO - * [gandelman-a] Swift, single server: TODO - * [gandelman-a] Swift, multi-server: TODO - * [gandelman-a] Glance: TODO + [gandelman-a] Nova, single server: TODO + [gandelman-a] Nova, multi-server: TODO + [gandelman-a] Swift, single server: TODO + [gandelman-a] Swift, multi-server: TODO + [gandelman-a] Glance: TODO Test modules within vanilla Ubuntu/Puppet infrastructure: TODO Test modules within Ubuntu/Orchestra infrastructure: TODO -- Ubuntu Server Puppet Integration https://blueprints.launchpad.net/ubuntu/+spec/server-o-puppet-integration -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 789323] Re: Please merge nut 2.6.0-2 (main) from debian unstable
This bug was fixed in the package nut - 2.6.0-2ubuntu1 --- nut (2.6.0-2ubuntu1) oneiric; urgency=low * Merge from debian unstable (LP: #789323). Remaining changes: + debian/control: - Update maintainer as per spec. - Add Breaks on nut-hal-drivers to ensure we have correct udev version. - Drop libpowerman0-dev from the Build-Depends (currently in universe) + debian/{nut-cgi,nut}.postinst: add nut to the dialout and nut groups unconditonally to handle the upgrade from hardy release. + debian/nut-powerman-pdu.install, debian/nut-powerman-pdu.manpages: dropped for now. + debian/nul-hal-drivers.{docs,install,postinst,preinst}: Dropped since hal is in universe now + debian/nut.links: must create the init script link, used if the upse needs to be powered down (LP: #357583) + debian/source_nut.py, debian/nut.install, debian/rules: Install apport hook. + debian/patches/backport-fix-lp753661.patch + Dropped: - debian/patches/fix_pc_file.patch: replaced by debian's 0002-fix_libupsclient_pc.patch * debian/patches/fix_pc_file.patch: add DEP3 patch header * debian/patches/debian-changes-2.6.0-1: remove that accidental file -- Scott Moser smo...@ubuntu.com Fri, 27 May 2011 16:16:10 -0400 ** Changed in: nut (Ubuntu) Status: Confirmed = Fix Released -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to nut in Ubuntu. https://bugs.launchpad.net/bugs/789323 Title: Please merge nut 2.6.0-2 (main) from debian unstable -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Blueprint server-o-xen-host] Improve Ubuntu as an Xen host.
Blueprint changed by Chuck Short: Whiteboard changed: Work Items: [zulcss] Sync Xen 4.1 from Debian Unstable: DONE [zulcss] Sync xen-common from Debian Unstable: DONE - [zulcss] Update xen dependencies for migration between xen-3.3 to xen-4.1: INPROGRESS + [zulcss] Update xen dependencies for migration between xen-3.3 to xen-4.1: DONE Check for upstream bug fixes that has not made it into debian yet: TODO [smb] Turn on dom0 kernel support in -server kernel: DONE Write MIR for libxen-devel to replace libxen3 in main: TODO Test build changes for libvirt with libxen-devel: TODO Remove xen-3.3 from the archive: TODO Remove ubuntu-xen-server from archive: TODO Remove ubuntu-xen-desktop from archive: TODO Update xenner to 0.48: TODO Test xen booting PAE on i386 without libvirt: TODO Test xen booting on amd64 without libvirt: TODO Test xen PAE on i386 with libvirt: TODO Test xen on amd64 with libvirt: TODO Test xen hvm CD install on i386: TODO Test xen hvm CD install on amd64: TODO Test xen-tools to make sure that it works with xen 4.1: TODO Test live-helper to see if it works with xen 4.1: TODO Create a small xen meta package to make xen install easier: TODO -- Improve Ubuntu as an Xen host. https://blueprints.launchpad.net/ubuntu/+spec/server-o-xen-host -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Blueprint server-o-xen-host] Improve Ubuntu as an Xen host.
Blueprint changed by Chuck Short: Whiteboard changed: Work Items: [zulcss] Sync Xen 4.1 from Debian Unstable: DONE [zulcss] Sync xen-common from Debian Unstable: DONE - [zulcss] Update xen dependencies for migration between xen-3.3 to xen-4.1: DONE + [zulcss] Update xen dependencies for migration between xen-3.3 to xen-4.1: INPROGRESS Check for upstream bug fixes that has not made it into debian yet: TODO [smb] Turn on dom0 kernel support in -server kernel: DONE Write MIR for libxen-devel to replace libxen3 in main: TODO Test build changes for libvirt with libxen-devel: TODO Remove xen-3.3 from the archive: TODO Remove ubuntu-xen-server from archive: TODO Remove ubuntu-xen-desktop from archive: TODO Update xenner to 0.48: TODO Test xen booting PAE on i386 without libvirt: TODO Test xen booting on amd64 without libvirt: TODO Test xen PAE on i386 with libvirt: TODO Test xen on amd64 with libvirt: TODO Test xen hvm CD install on i386: TODO Test xen hvm CD install on amd64: TODO Test xen-tools to make sure that it works with xen 4.1: TODO Test live-helper to see if it works with xen 4.1: TODO Create a small xen meta package to make xen install easier: TODO -- Improve Ubuntu as an Xen host. https://blueprints.launchpad.net/ubuntu/+spec/server-o-xen-host -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 780657] Re: FreeBSD Hangs on Boot
Is this the same bug as #746114? -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in Ubuntu. https://bugs.launchpad.net/bugs/780657 Title: FreeBSD Hangs on Boot -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790774] [NEW] ssh hangs after inactivity (maybe when connection is lost)
Public bug reported: Steps to reproduce: 1. Open a terminal 2. Write: ssh u...@myhost.com where myhost.com is some host where you have ssh access and user is the user name 3. Enter the password when prompted 4. Wait for several minutes or hours without doing anything 5. try to type something Expected: either the connection is still alive, in which case you should be able to type, see what you type, and do things while logged on the remote machine, OR the connection has been closed due to inactivity, in which case ssh should show a message and gracefully quit. Observed: ssh hangs; No message is shown; the remote machine's prompt is still shown and the cursor still blinks, but you are unable to type anything. You can't even quit ssh (typing exit has no effect) and return to normal local terminal operation. The only way out is to close the terminal (or open another one and kill the ssh process) I guess this happens when the connection with the server is lost, probably closed by the server due to inactivity; however the client should detect this and gracefully exit. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: ssh (not installed) ProcVersionSignature: Ubuntu 2.6.32-31.61-generic 2.6.32.32+drm33.14 Uname: Linux 2.6.32-31-generic i686 NonfreeKernelModules: nvidia Architecture: i386 Date: Tue May 31 18:04:56 2011 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) ProcEnviron: PATH=(custom, no user) LANG=en_US.utf8 SHELL=/bin/bash SourcePackage: openssh ** Affects: openssh (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 lucid -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to openssh in Ubuntu. https://bugs.launchpad.net/bugs/790774 Title: ssh hangs after inactivity (maybe when connection is lost) -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Blueprint server-o-jenkins] Get Jenkins into the Ubuntu Archive
Blueprint changed by James Page: Whiteboard changed: UDS Session Notes Discussion: - Approach to plugins; - packaging recipe? Documentation to be polished - disable Jenkins upstream plugin manager? Not by default but ensure can be disabled and that this is documented well. - build from source? where possible - look at most popular plugins and assess top 5. - Delivery approach: - Debian or Ubuntu first? Ubuntu then Debian - will get better testing coverage if it hits Oneiric earlier. - Sponsorship burden - large number of packages. Target universe, spread the burden as wide as possible in Ubuntu. - Jenkins Nuances: - Package variants - OK - Hudson polutiom - OK Target 1.400.1 when delivered by upstream. Work Items (oneiric-alpha-2): [james-page] upgrade to latest stable branch (1.409.1) from Jenkins + upgrade dependencies: TODO - [james-page] Resolve outstanding build-from-source issues in dependency chain: TODO - [james-page] Prepare library packaging for upload to Ubuntu: TODO + [james-page] Resolve outstanding build-from-source issues in dependency chain: DONE + [james-page] Prepare library packaging for upload to Ubuntu: INPROGRESS upload of jenkins plus dependencies to Ubuntu Universe: TODO Work Items (oneiric-alpha-3): [james-page] look at JVM compatibility with xstream on ARM (for example): TODO Work Items: [james-page] feedback libraries to Debian through debian-java team: TODO [james-page] Update documentation for disabling plugin management through web ui: TODO [james-page] re-sync libraries from Debian as a when required: TODO [james-page] orchestra recipe for deploying Jenkins: TODO [james-page] ensemble formula for deploying Jenkins: TODO -- Get Jenkins into the Ubuntu Archive https://blueprints.launchpad.net/ubuntu/+spec/server-o-jenkins -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Blueprint server-o-ensemble-conference-talks] Ensemble Conference Talks
Blueprint changed by Robbie Williamson: Whiteboard changed: Work Items: - [bcsaller] Cloud Camp - May 26, 2011 in San Francisco, CA, USA {1}: TODO + [bcsaller] Cloud Camp - May 26, 2011 in San Francisco, CA, USA {1}: DONE DevOps Day Australia (Taking talk submissions now) - July 22-23rd in Melbourne, Australia{2}: TODO HotCloud (Poster submissions are due by Monday, May 30, 2011, at 3:00 p.m. PDT) - June 14–15 in Portland, OR, USA{3}: TODO DevOps Day Mountain View (Proposal Deadline is 1st of June 2011) - June 17-18th in Mountain View{4}: TODO Cloud Camp - June 2, 2011 in Boston (Waltham, MA), USA{5}: TODO [robbie.w] Cloud Camp - June 7, 2011 in New York, USA{6}: TODO Velocity BoF Session (Call closes 11:59pm 06/09/2011 PDT) - June 14th-16th in Santa Clara, CA{7}: TODO Large Installation System Administration Conference - (Call closes June 9, 2011, 11:59 p.m. PDT) - December 4–9, 2011, Boston, MA{8}: TODO Cloud Connect 2012 - (Call closes August 5th, 2011) - February 13-16, 2012, Silicon Valley, CA{9}: TODO Ops Camp - June 13, 2011 in Portland, OR, USA{10}: TODO [clint-fewbar] Cloud Camp - June 14, 2011 in San Diego, CA, USA{11}: TODO Cloud Camp - June 16, 2011 in Seattle, USA{12}: TODO CloudCamp - June 20, 2011 in Cincinnati, OH, USA{13}: TODO [clint-fewbar] OSCON BoF Session (Call closes 11:59pm 07/22/2011 PDT) - July 25-29th in Portland, OR{14}: TODO CloudCamp - September 10, 2011 in Munich, Germany{15}: TODO CloudCamp - October 9, 2011 in Cloud Track @ Silicon Valley Code Camp, USA{16}: TODO Links: {1} http://www.cloudcamp.org/sf/2011-05-26 {2} http://devopsdownunder.org/ {3} http://www.usenix.org/events/hotcloud11/ {4} http://www.devopsdays.org/events/2011-mountainview/proposals/ {5} http://www.cloudcamp.org/boston/2011-06-02 {6} http://www.cloudcamp.org/ny/2011-06-07 {7} http://velocityconf.com/velocity2011/public/cfp/157 {8} http://www.usenix.org/events/lisa11/ {9} http://www.cloudconnectevent.com/santaclara/call-for-papers/ {10} http://www.opscamp.org/ {11} http://www.cloudcamp.org/sandiego/2011-06-14 {12} http://www.cloudcamp.org/seattle/2011-06-16 {13} http://www.cloudcamp.org/cincinnati/2011-06-20 {14} http://www.oscon.com/oscon2011/public/cfp/164 {15} http://www.cloudcamp.org/munich/2011-09-10 {16} http://www.cloudcamp.org/siliconvalley/2011-10-09 -- Ensemble Conference Talks https://blueprints.launchpad.net/ubuntu/+spec/server-o-ensemble-conference-talks -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Blueprint server-o-ensemble-conference-talks] Ensemble Conference Talks
Blueprint changed by Robbie Williamson: Whiteboard changed: Work Items: [bcsaller] Cloud Camp - May 26, 2011 in San Francisco, CA, USA {1}: DONE - DevOps Day Australia (Taking talk submissions now) - July 22-23rd in Melbourne, Australia{2}: TODO + DevOps Day Australia (Taking talk submissions now) - July 22-23rd in Melbourne, Australia{2}: POSTPONED HotCloud (Poster submissions are due by Monday, May 30, 2011, at 3:00 p.m. PDT) - June 14–15 in Portland, OR, USA{3}: TODO DevOps Day Mountain View (Proposal Deadline is 1st of June 2011) - June 17-18th in Mountain View{4}: TODO Cloud Camp - June 2, 2011 in Boston (Waltham, MA), USA{5}: TODO [robbie.w] Cloud Camp - June 7, 2011 in New York, USA{6}: TODO Velocity BoF Session (Call closes 11:59pm 06/09/2011 PDT) - June 14th-16th in Santa Clara, CA{7}: TODO Large Installation System Administration Conference - (Call closes June 9, 2011, 11:59 p.m. PDT) - December 4–9, 2011, Boston, MA{8}: TODO Cloud Connect 2012 - (Call closes August 5th, 2011) - February 13-16, 2012, Silicon Valley, CA{9}: TODO Ops Camp - June 13, 2011 in Portland, OR, USA{10}: TODO [clint-fewbar] Cloud Camp - June 14, 2011 in San Diego, CA, USA{11}: TODO Cloud Camp - June 16, 2011 in Seattle, USA{12}: TODO CloudCamp - June 20, 2011 in Cincinnati, OH, USA{13}: TODO [clint-fewbar] OSCON BoF Session (Call closes 11:59pm 07/22/2011 PDT) - July 25-29th in Portland, OR{14}: TODO CloudCamp - September 10, 2011 in Munich, Germany{15}: TODO CloudCamp - October 9, 2011 in Cloud Track @ Silicon Valley Code Camp, USA{16}: TODO Links: {1} http://www.cloudcamp.org/sf/2011-05-26 {2} http://devopsdownunder.org/ {3} http://www.usenix.org/events/hotcloud11/ {4} http://www.devopsdays.org/events/2011-mountainview/proposals/ {5} http://www.cloudcamp.org/boston/2011-06-02 {6} http://www.cloudcamp.org/ny/2011-06-07 {7} http://velocityconf.com/velocity2011/public/cfp/157 {8} http://www.usenix.org/events/lisa11/ {9} http://www.cloudconnectevent.com/santaclara/call-for-papers/ {10} http://www.opscamp.org/ {11} http://www.cloudcamp.org/sandiego/2011-06-14 {12} http://www.cloudcamp.org/seattle/2011-06-16 {13} http://www.cloudcamp.org/cincinnati/2011-06-20 {14} http://www.oscon.com/oscon2011/public/cfp/164 {15} http://www.cloudcamp.org/munich/2011-09-10 {16} http://www.cloudcamp.org/siliconvalley/2011-10-09 -- Ensemble Conference Talks https://blueprints.launchpad.net/ubuntu/+spec/server-o-ensemble-conference-talks -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Blueprint server-o-ensemble-conference-talks] Ensemble Conference Talks
Blueprint changed by Robbie Williamson: Whiteboard changed: Work Items: [bcsaller] Cloud Camp - May 26, 2011 in San Francisco, CA, USA {1}: DONE DevOps Day Australia (Taking talk submissions now) - July 22-23rd in Melbourne, Australia{2}: POSTPONED - HotCloud (Poster submissions are due by Monday, May 30, 2011, at 3:00 p.m. PDT) - June 14–15 in Portland, OR, USA{3}: TODO + HotCloud (Poster submissions are due by Monday, May 30, 2011, at 3:00 p.m. PDT) - June 14–15 in Portland, OR, USA{3}: POSTPONED DevOps Day Mountain View (Proposal Deadline is 1st of June 2011) - June 17-18th in Mountain View{4}: TODO Cloud Camp - June 2, 2011 in Boston (Waltham, MA), USA{5}: TODO [robbie.w] Cloud Camp - June 7, 2011 in New York, USA{6}: TODO Velocity BoF Session (Call closes 11:59pm 06/09/2011 PDT) - June 14th-16th in Santa Clara, CA{7}: TODO Large Installation System Administration Conference - (Call closes June 9, 2011, 11:59 p.m. PDT) - December 4–9, 2011, Boston, MA{8}: TODO Cloud Connect 2012 - (Call closes August 5th, 2011) - February 13-16, 2012, Silicon Valley, CA{9}: TODO Ops Camp - June 13, 2011 in Portland, OR, USA{10}: TODO [clint-fewbar] Cloud Camp - June 14, 2011 in San Diego, CA, USA{11}: TODO Cloud Camp - June 16, 2011 in Seattle, USA{12}: TODO CloudCamp - June 20, 2011 in Cincinnati, OH, USA{13}: TODO [clint-fewbar] OSCON BoF Session (Call closes 11:59pm 07/22/2011 PDT) - July 25-29th in Portland, OR{14}: TODO CloudCamp - September 10, 2011 in Munich, Germany{15}: TODO CloudCamp - October 9, 2011 in Cloud Track @ Silicon Valley Code Camp, USA{16}: TODO Links: {1} http://www.cloudcamp.org/sf/2011-05-26 {2} http://devopsdownunder.org/ {3} http://www.usenix.org/events/hotcloud11/ {4} http://www.devopsdays.org/events/2011-mountainview/proposals/ {5} http://www.cloudcamp.org/boston/2011-06-02 {6} http://www.cloudcamp.org/ny/2011-06-07 {7} http://velocityconf.com/velocity2011/public/cfp/157 {8} http://www.usenix.org/events/lisa11/ {9} http://www.cloudconnectevent.com/santaclara/call-for-papers/ {10} http://www.opscamp.org/ {11} http://www.cloudcamp.org/sandiego/2011-06-14 {12} http://www.cloudcamp.org/seattle/2011-06-16 {13} http://www.cloudcamp.org/cincinnati/2011-06-20 {14} http://www.oscon.com/oscon2011/public/cfp/164 {15} http://www.cloudcamp.org/munich/2011-09-10 {16} http://www.cloudcamp.org/siliconvalley/2011-10-09 -- Ensemble Conference Talks https://blueprints.launchpad.net/ubuntu/+spec/server-o-ensemble-conference-talks -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Blueprint server-o-ensemble-conference-talks] Ensemble Conference Talks
Blueprint changed by Robbie Williamson: Whiteboard changed: Work Items: [bcsaller] Cloud Camp - May 26, 2011 in San Francisco, CA, USA {1}: DONE DevOps Day Australia (Taking talk submissions now) - July 22-23rd in Melbourne, Australia{2}: POSTPONED HotCloud (Poster submissions are due by Monday, May 30, 2011, at 3:00 p.m. PDT) - June 14–15 in Portland, OR, USA{3}: POSTPONED - DevOps Day Mountain View (Proposal Deadline is 1st of June 2011) - June 17-18th in Mountain View{4}: TODO + [bcsaller] DevOps Day Mountain View (Proposal Deadline is 1st of June 2011) - June 17-18th in Mountain View{4}: TODO Cloud Camp - June 2, 2011 in Boston (Waltham, MA), USA{5}: TODO [robbie.w] Cloud Camp - June 7, 2011 in New York, USA{6}: TODO Velocity BoF Session (Call closes 11:59pm 06/09/2011 PDT) - June 14th-16th in Santa Clara, CA{7}: TODO Large Installation System Administration Conference - (Call closes June 9, 2011, 11:59 p.m. PDT) - December 4–9, 2011, Boston, MA{8}: TODO Cloud Connect 2012 - (Call closes August 5th, 2011) - February 13-16, 2012, Silicon Valley, CA{9}: TODO Ops Camp - June 13, 2011 in Portland, OR, USA{10}: TODO [clint-fewbar] Cloud Camp - June 14, 2011 in San Diego, CA, USA{11}: TODO Cloud Camp - June 16, 2011 in Seattle, USA{12}: TODO CloudCamp - June 20, 2011 in Cincinnati, OH, USA{13}: TODO [clint-fewbar] OSCON BoF Session (Call closes 11:59pm 07/22/2011 PDT) - July 25-29th in Portland, OR{14}: TODO CloudCamp - September 10, 2011 in Munich, Germany{15}: TODO CloudCamp - October 9, 2011 in Cloud Track @ Silicon Valley Code Camp, USA{16}: TODO Links: {1} http://www.cloudcamp.org/sf/2011-05-26 {2} http://devopsdownunder.org/ {3} http://www.usenix.org/events/hotcloud11/ {4} http://www.devopsdays.org/events/2011-mountainview/proposals/ {5} http://www.cloudcamp.org/boston/2011-06-02 {6} http://www.cloudcamp.org/ny/2011-06-07 {7} http://velocityconf.com/velocity2011/public/cfp/157 {8} http://www.usenix.org/events/lisa11/ {9} http://www.cloudconnectevent.com/santaclara/call-for-papers/ {10} http://www.opscamp.org/ {11} http://www.cloudcamp.org/sandiego/2011-06-14 {12} http://www.cloudcamp.org/seattle/2011-06-16 {13} http://www.cloudcamp.org/cincinnati/2011-06-20 {14} http://www.oscon.com/oscon2011/public/cfp/164 {15} http://www.cloudcamp.org/munich/2011-09-10 {16} http://www.cloudcamp.org/siliconvalley/2011-10-09 -- Ensemble Conference Talks https://blueprints.launchpad.net/ubuntu/+spec/server-o-ensemble-conference-talks -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790789] [NEW] KVM Guest freezing following Ubuntu update
Public bug reported: Binary package hint: qemu-kvm UBUNTU 10.04 AMD 64 bit: I have been running a trixbox 2.8 KVM guest on my system since July 2010. This system has worked flawlessly up until this morning. I had a notification that my system needed a reboot, following which the trixbox guest hangs on startup. I have after a number of hours found a workaround which is but there may be a serious regression here bought in by this recent update. My work around involves adding clock=acpi_pm to the guest boot command. The freeze appears to hang just after kvm-clocksource has been installed messages. The guest is using 100% cpu on the host. I am not aware of any other changes to my host system so suspect the update has caused this. ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: kvm 1:84+dfsg-0ubuntu16+0.12.3+noroms+0ubuntu9.6 ProcVersionSignature: Ubuntu 2.6.32-32.62-server 2.6.32.38+drm33.16 Uname: Linux 2.6.32-32-server x86_64 NonfreeKernelModules: fglrx Architecture: amd64 Date: Tue May 31 17:55:18 2011 InstallationMedia: Ubuntu-Server 10.04 LTS Lucid Lynx - Release amd64 (20100427) KvmCmdLine: UIDPID PPID CSZ RSS PSR STIME TTY TIME CMD root 3611 1 99 175569 38048 2 17:54 ?00:00:54 /usr/bin/kvm -S -M pc-0.12 -enable-kvm -m 512 -smp 2,cores=2 -name Trixbox2.8 -uuid c19e7ccd-6a2d-35b0-5e0a-e9832434c517 -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/Trixbox2.8.monitor,server,nowait -monitor chardev:monitor -boot c -drive file=/var/lib/libvirt/images/Trixbox2.8.img,if=virtio,index=0,boot=on,format=raw -drive if=ide,media=cdrom,index=2,format=raw -net nic,macaddr=52:54:00:45:84:af,vlan=0,model=virtio,name=virtio.0 -net tap,fd=48,vlan=0,name=tap.0 -chardev pty,id=serial0 -serial chardev:serial0 -parallel none -usb -vnc 127.0.0.1:0 -vga cirrus MachineType: Gigabyte Technology Co., Ltd. GA-890GPA-UD3H ProcCmdLine: BOOT_IMAGE=/vmlinuz-2.6.32-32-server root=/dev/mapper/hostname_vg1-root ro quiet ProcEnviron: LANG=en_GB.utf8 SHELL=/bin/bash SourcePackage: qemu-kvm dmi.bios.date: 05/17/2010 dmi.bios.vendor: Award Software International, Inc. dmi.bios.version: FB dmi.board.name: GA-890GPA-UD3H dmi.board.vendor: Gigabyte Technology Co., Ltd. dmi.board.version: x.x dmi.chassis.type: 3 dmi.chassis.vendor: Gigabyte Technology Co., Ltd. dmi.modalias: dmi:bvnAwardSoftwareInternational,Inc.:bvrFB:bd05/17/2010:svnGigabyteTechnologyCo.,Ltd.:pnGA-890GPA-UD3H:pvr:rvnGigabyteTechnologyCo.,Ltd.:rnGA-890GPA-UD3H:rvrx.x:cvnGigabyteTechnologyCo.,Ltd.:ct3:cvr: dmi.product.name: GA-890GPA-UD3H dmi.sys.vendor: Gigabyte Technology Co., Ltd. ** Affects: qemu-kvm (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-bug lucid -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in Ubuntu. https://bugs.launchpad.net/bugs/790789 Title: KVM Guest freezing following Ubuntu update -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790789] Re: KVM Guest freezing following Ubuntu update
-- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in Ubuntu. https://bugs.launchpad.net/bugs/790789 Title: KVM Guest freezing following Ubuntu update -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Blueprint server-o-xen-host] Improve Ubuntu as an Xen host.
Blueprint changed by Chuck Short: Whiteboard changed: Work Items: [zulcss] Sync Xen 4.1 from Debian Unstable: DONE [zulcss] Sync xen-common from Debian Unstable: DONE - [zulcss] Update xen dependencies for migration between xen-3.3 to xen-4.1: INPROGRESS + [zulcss] Update xen dependencies for migration between xen-3.3 to xen-4.1: DONE Check for upstream bug fixes that has not made it into debian yet: TODO [smb] Turn on dom0 kernel support in -server kernel: DONE Write MIR for libxen-devel to replace libxen3 in main: TODO Test build changes for libvirt with libxen-devel: TODO Remove xen-3.3 from the archive: TODO Remove ubuntu-xen-server from archive: TODO Remove ubuntu-xen-desktop from archive: TODO Update xenner to 0.48: TODO Test xen booting PAE on i386 without libvirt: TODO Test xen booting on amd64 without libvirt: TODO Test xen PAE on i386 with libvirt: TODO Test xen on amd64 with libvirt: TODO Test xen hvm CD install on i386: TODO Test xen hvm CD install on amd64: TODO Test xen-tools to make sure that it works with xen 4.1: TODO Test live-helper to see if it works with xen 4.1: TODO Create a small xen meta package to make xen install easier: TODO -- Improve Ubuntu as an Xen host. https://blueprints.launchpad.net/ubuntu/+spec/server-o-xen-host -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Blueprint server-o-xen-host] Improve Ubuntu as an Xen host.
Blueprint changed by Chuck Short: Whiteboard changed: Work Items: [zulcss] Sync Xen 4.1 from Debian Unstable: DONE [zulcss] Sync xen-common from Debian Unstable: DONE [zulcss] Update xen dependencies for migration between xen-3.3 to xen-4.1: DONE Check for upstream bug fixes that has not made it into debian yet: TODO [smb] Turn on dom0 kernel support in -server kernel: DONE - Write MIR for libxen-devel to replace libxen3 in main: TODO + Write MIR for libxen-devel to replace libxen3-dev in main: TODO Test build changes for libvirt with libxen-devel: TODO Remove xen-3.3 from the archive: TODO Remove ubuntu-xen-server from archive: TODO Remove ubuntu-xen-desktop from archive: TODO Update xenner to 0.48: TODO Test xen booting PAE on i386 without libvirt: TODO Test xen booting on amd64 without libvirt: TODO Test xen PAE on i386 with libvirt: TODO Test xen on amd64 with libvirt: TODO Test xen hvm CD install on i386: TODO Test xen hvm CD install on amd64: TODO Test xen-tools to make sure that it works with xen 4.1: TODO Test live-helper to see if it works with xen 4.1: TODO Create a small xen meta package to make xen install easier: TODO -- Improve Ubuntu as an Xen host. https://blueprints.launchpad.net/ubuntu/+spec/server-o-xen-host -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790837] [NEW] Fails to start inside PV domU
Public bug reported: Xen PV domU's have no PCI bus. libvirt's src/node_device/node_device_udev.c calls pci_system_init which looks for /sys/bus/pci. If it does not find /sys/bus/pci (which it won't in a Xen PV domU) it returns unsuccesfully, which libvirt considers fatal. It's perfectly reasonable to want to run libvirt in a paravirt Xen domU, e.g. for running LXC, QEmu or UML guests. Additionally, the PCI check is disabled on s390, and a failing check is ignored for qemu:///session, so I don't see how it can be absolutely required for qemu:///system on non-s390. ** Affects: libvirt (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to libvirt in Ubuntu. https://bugs.launchpad.net/bugs/790837 Title: Fails to start inside PV domU -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 211631] Re: Network is brought down before network filesystems are unmounted (CIFS timeout at shutdown)
I still have a hang on reboot / shutdown even after installing the more recent netbase (4.45ubuntu3) and dbus (1.4.8-3ubuntu2) packages on my Kubuntu 11.04 laptop. I have four cifs shares defined in fstab. If I shutdown or reboot, I see network-manager caught signal 15, then a message about dbus, then modem-manager caught signal 15, then modem- manager restarts and load a bunch of plugins, then restarts again and again loads a bunch of plugins after several seconds' pause, and then the system hangs. If I unmount the network shares before shutting down / rebooting (sudo umount - a), the sequence is the same, except that after the second time modem-manager starts up, there's message about dbus that flashes briefly on the screen just before the power cycles off (so no hang if I unmount the network shares). -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in Ubuntu. https://bugs.launchpad.net/bugs/211631 Title: Network is brought down before network filesystems are unmounted (CIFS timeout at shutdown) -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790841] [NEW] package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Public bug reported: Binary package hint: bind9 Failed to install bind 9 update Setting up bind9 (1:9.7.0.dfsg.P1-1ubuntu0.2) ... * Starting domain name service... bind9 [fail] invoke-rc.d: initscript bind9, action start failed. dpkg: error processing bind9 (--configure): subprocess installed post-installation script returned error exit status 1 Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: bind9 E: Sub-process /usr/bin/dpkg returned an error code (1) ProblemType: Package DistroRelease: Ubuntu 10.04 Package: bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 ProcVersionSignature: Ubuntu 2.6.32-29.58-generic-pae 2.6.32.28+drm33.13 Uname: Linux 2.6.32-29-generic-pae i686 Architecture: i386 Date: Tue May 31 14:59:15 2011 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) SourcePackage: bind9 Title: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 ** Affects: bind9 (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 lucid -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to bind9 in Ubuntu. https://bugs.launchpad.net/bugs/790841 Title: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790841] Re: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
-- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to bind9 in Ubuntu. https://bugs.launchpad.net/bugs/790841 Title: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790837] Re: Fails to start inside PV domU
** Bug watch added: Red Hat Bugzilla #709471 https://bugzilla.redhat.com/show_bug.cgi?id=709471 ** Also affects: libvirt via https://bugzilla.redhat.com/show_bug.cgi?id=709471 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to libvirt in Ubuntu. https://bugs.launchpad.net/bugs/790837 Title: Fails to start inside PV domU -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790837] Re: Fails to start inside PV domU
** Changed in: libvirt (Ubuntu) Status: New = Triaged ** Changed in: libvirt (Ubuntu) Importance: Undecided = Medium -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to libvirt in Ubuntu. https://bugs.launchpad.net/bugs/790837 Title: Fails to start inside PV domU -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Blueprint server-o-xen-host] Improve Ubuntu as an Xen host.
Blueprint changed by Chuck Short: Whiteboard changed: Work Items: [zulcss] Sync Xen 4.1 from Debian Unstable: DONE [zulcss] Sync xen-common from Debian Unstable: DONE [zulcss] Update xen dependencies for migration between xen-3.3 to xen-4.1: DONE Check for upstream bug fixes that has not made it into debian yet: TODO [smb] Turn on dom0 kernel support in -server kernel: DONE - Write MIR for libxen-devel to replace libxen3-dev in main: TODO + [zulcss] Write MIR for libxen-devel and libxenstore3.0 to replace libxen3-dev in main: DONE Test build changes for libvirt with libxen-devel: TODO Remove xen-3.3 from the archive: TODO Remove ubuntu-xen-server from archive: TODO Remove ubuntu-xen-desktop from archive: TODO Update xenner to 0.48: TODO Test xen booting PAE on i386 without libvirt: TODO Test xen booting on amd64 without libvirt: TODO Test xen PAE on i386 with libvirt: TODO Test xen on amd64 with libvirt: TODO Test xen hvm CD install on i386: TODO Test xen hvm CD install on amd64: TODO Test xen-tools to make sure that it works with xen 4.1: TODO Test live-helper to see if it works with xen 4.1: TODO Create a small xen meta package to make xen install easier: TODO -- Improve Ubuntu as an Xen host. https://blueprints.launchpad.net/ubuntu/+spec/server-o-xen-host -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790145] Re: kvm husb: ctrl buffer too small
Maybe something is wrong with my PDA? If I *uncheck* Enable advanced network functionality on WinMobile 6 (Start menu - Settings - Connections - USBtoPC) everything works well! This checkbox changes PDA connection mode from RNDIS to ttyUSB0 (serial). And then I can use Activesync! -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in Ubuntu. https://bugs.launchpad.net/bugs/790145 Title: kvm husb: ctrl buffer too small -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 780820] Re: kadmin: IPv6 support binds IPv4 socket leading to EAFNOSUPPORT.
1.9 has been merged into oneiric. ** Changed in: krb5 (Ubuntu) Status: Confirmed = Fix Released -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to krb5 in Ubuntu. https://bugs.launchpad.net/bugs/780820 Title: kadmin: IPv6 support binds IPv4 socket leading to EAFNOSUPPORT. -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790789] Re: KVM Guest freezing following Ubuntu update
I wonder if this could be due to c7801430c930f490a0aa54dbd63be10e0a466cf5 in ubuntu-lucid. -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in Ubuntu. https://bugs.launchpad.net/bugs/790789 Title: KVM Guest freezing following Ubuntu update -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790789] Re: KVM Guest freezing following Ubuntu update
@Royston, would you mind testing the kernel (once it builds, probably later tonight or tomorrow morning) at https://launchpad.net/~serge- hallyn/+archive/kernel? -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in Ubuntu. https://bugs.launchpad.net/bugs/790789 Title: KVM Guest freezing following Ubuntu update -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790912] [NEW] package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1
Public bug reported: Binary package hint: bind9 Happened just after an oridnary upgrade. ProblemType: Package DistroRelease: Ubuntu 10.04 Package: bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 ProcVersionSignature: Ubuntu 2.6.32-31.61-generic 2.6.32.32+drm33.14 Uname: Linux 2.6.32-31-generic i686 Architecture: i386 Date: Tue May 31 23:08:18 2011 ErrorMessage: ErrorMessage: subprocess installed post-installation script returned error exit status 1 SourcePackage: bind9 Title: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1 ** Affects: bind9 (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 lucid -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to bind9 in Ubuntu. https://bugs.launchpad.net/bugs/790912 Title: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790912] Re: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1
-- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to bind9 in Ubuntu. https://bugs.launchpad.net/bugs/790912 Title: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790912] Re: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1
*** This bug is a duplicate of bug 790372 *** https://bugs.launchpad.net/bugs/790372 ** This bug has been marked a duplicate of bug 790372 package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to bind9 in Ubuntu. https://bugs.launchpad.net/bugs/790912 Title: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790841] Re: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
*** This bug is a duplicate of bug 790372 *** https://bugs.launchpad.net/bugs/790372 ** This bug has been marked a duplicate of bug 790372 package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to bind9 in Ubuntu. https://bugs.launchpad.net/bugs/790841 Title: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790673] Re: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: el subproceso instalado el script post-installation devolvió el código de salida de error 1
*** This bug is a duplicate of bug 790372 *** https://bugs.launchpad.net/bugs/790372 ** This bug has been marked a duplicate of bug 790372 package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to bind9 in Ubuntu. https://bugs.launchpad.net/bugs/790673 Title: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: el subproceso instalado el script post-installation devolvió el código de salida de error 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 760653] Re: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
*** This bug is a duplicate of bug 790363 *** https://bugs.launchpad.net/bugs/790363 ** This bug has been marked a duplicate of bug 790363 package bind9 1:9.7.3.dfsg-1ubuntu2.1 failed to install/upgrade: el subproceso instalado el script post-installation devolvió el código de salida de error 1 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to bind9 in Ubuntu. https://bugs.launchpad.net/bugs/760653 Title: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790379] Re: package mysql-server-5.1 5.1.54-1ubuntu4 failed to install/upgrade: aliprosessi installed post-installation script palautti virhetilakoodin 1
*** This bug is a duplicate of bug 784300 *** https://bugs.launchpad.net/bugs/784300 ** This bug has been marked a duplicate of bug 784300 package mysql-server-5.1 5.1.54-1ubuntu4 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to mysql-5.1 in Ubuntu. https://bugs.launchpad.net/bugs/790379 Title: package mysql-server-5.1 5.1.54-1ubuntu4 failed to install/upgrade: aliprosessi installed post-installation script palautti virhetilakoodin 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 667269] Re: winbind crashes
similar to the stack trace in comment #6 above, winbind crashed today (on machine bee64) with this stack trace as gotten from gdb against the core file left behind: (gdb) bt #0 0x7f70d81fda75 in raise () from /lib/libc.so.6 #1 0x7f70d82015c0 in abort () from /lib/libc.so.6 #2 0x7f70da6a3460 in dump_core () at lib/fault.c:337 #3 0x7f70da6b428e in smb_panic (why=value optimized out) at lib/util.c:1496 #4 0x7f70da6a385d in fault_report (sig=11) at lib/fault.c:52 #5 sig_fault (sig=11) at lib/fault.c:75 #6 signal handler called #7 get_cache (domain=0x0) at winbindd/winbindd_cache.c:139 #8 0x7f70da616888 in resolve_username_to_alias (mem_ctx=value optimized out, domain=0x0, name=0x7f70db4aacb0 gautam.naik, alias=0x7fffab4a4110) at winbindd/winbindd_cache.c:1019 #9 0x7f70da609016 in normalize_name_map (mem_ctx=0x7f70db496180, domain=0x0, name=0x7f70db4aacb0 gautam.naik, normalized=0x7fffab4a4110) at winbindd/winbindd_util.c:1442 #10 0x7f70da6076ef in fill_grent_mem_domusers (domain=0x7f70db4b0d40, state=value optimized out, group_sid=0x7f70db46ced0, group_name_type=value optimized out, num_gr_mem=value optimized out, gr_mem=value optimized out, gr_mem_len=0x7fffab4a44c8) at winbindd/winbindd_group.c:330 #11 fill_grent_mem (domain=0x7f70db4b0d40, state=value optimized out, group_sid=0x7f70db46ced0, group_name_type=value optimized out, num_gr_mem=value optimized out, gr_mem=value optimized out, gr_mem_len=0x7fffab4a44c8) at winbindd/winbindd_group.c:578 #12 0x7f70da607a9f in getgrsid_sid2gid_recv (private_data=0x7f70db46ceb0, success=value optimized out, gid=563) at winbindd/winbindd_group.c:866 #13 0x7f70da600ba0 in process_loop (argc=value optimized out, argv=value optimized out, envp=value optimized out) at winbindd/winbindd.c:1115 #14 main (argc=value optimized out, argv=value optimized out, envp=value optimized out) at winbindd/winbindd.c:1440 I am running the latest winbind of 2:3.4.7~dfsg-1ubuntu3.6 So the problem still persists after upgrading to 2:3.4.7~dfsg- 1ubuntu3.6. What other information do you want me to provide? -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in Ubuntu. https://bugs.launchpad.net/bugs/667269 Title: winbind crashes -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790372] Re: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
** Changed in: bind9 (Ubuntu) Status: New = Confirmed ** Changed in: bind9 (Ubuntu) Status: Confirmed = New ** Changed in: bind9 (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to bind9 in Ubuntu. https://bugs.launchpad.net/bugs/790372 Title: package bind9 1:9.7.0.dfsg.P1-1ubuntu0.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
Re: [Bug 790789] Re: KVM Guest freezing following Ubuntu update
Serge, I will do this if there is a foolproof way of doing so. This is my main machine that runs a number of VM's so I would need to know there is a sure fire method of testing this new kernel. Happy to follow a reliable link. By the way, other guests seem OK. Trixbox is Centos 5.5 I . I have a media streamer VM based off the latest debian release which is OK and also a SL 6.0 which is a copy of red hat 6.0 that seems OK. Also a number of Windows VM's. I do not know what timeing source they use though. Regards Roy On 31/05/2011 21:57, Serge Hallyn wrote: @Royston, would you mind testing the kernel (once it builds, probably later tonight or tomorrow morning) at https://launchpad.net/~serge- hallyn/+archive/kernel? -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to qemu-kvm in Ubuntu. https://bugs.launchpad.net/bugs/790789 Title: KVM Guest freezing following Ubuntu update -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790967] [NEW] package samba 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Public bug reported: Binary package hint: samba Automatic bug announcement. Trying to mount smb shares on local domain and cannot do so over VPN. Worked in 9.04, 9.10, 10.04, 10.10. Able to mount them when connected directly, just not over VPN (PPTP). ProblemType: Package DistroRelease: Ubuntu 11.04 Package: samba 2:3.5.8~dfsg-1ubuntu2.2 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic x86_64 NonfreeKernelModules: nvidia Architecture: amd64 Date: Sun May 29 00:55:22 2011 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release amd64 (20110427.1) RelatedPackageVersions: nautilus 1:2.32.2.1-0ubuntu13 gvfs 1.8.0-0ubuntu2 SambaClientRegression: Yes SourcePackage: samba Title: package samba 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: samba (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package natty -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in Ubuntu. https://bugs.launchpad.net/bugs/790967 Title: package samba 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790967] Re: package samba 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
-- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to samba in Ubuntu. https://bugs.launchpad.net/bugs/790967 Title: package samba 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 771557] [NEW] dovecot does not want to start
You have been subscribed to a public bug: Dovecot with exim4 simply does not want to star. dovecot package is 1.2.12-1ubuntu8. All I see in syslog is Apr 26 20:04:20 snowman init: dovecot main process (8874) terminated with status 89 here is my dovecot.conf ## Dovecot configuration file # If you're in a hurry, see http://wiki.dovecot.org/QuickConfiguration # -- WARNING --- # If there's a file /etc/dovecot/dovecot-postfix.conf, which is part of # dovecot-postfix package, it will be used instead of dovecot.conf. # Keep in mind that, if that file exist, none of the changes in # /etc/dovecot/dovecot.conf will have effect on dovecot's configuration. # In that case you should customize /etc/dovecot/dovecot-postfix.conf. # -- WARNING --- # dovecot -n command gives a clean output of the changed settings. Use it # instead of copypasting this file when posting to the Dovecot mailing list. # '#' character and everything after it is treated as comments. Extra spaces # and tabs are ignored. If you want to use either of these explicitly, put the # value inside quotes, eg.: key = # char and trailing whitespace # Default values are shown for each setting, it's not required to uncomment # any of the lines. Exception to this are paths, they're just examples with # the real defaults being based on configure options. The paths listed here # are for configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var # --with-ssldir=/etc/ssl # Base directory where to store runtime data. #base_dir = /var/run/dovecot/ # Protocols we want to be serving: imap imaps pop3 pop3s managesieve # If you only want to use dovecot-auth, you can set this to none. #protocols = imap imaps protocols = imap imaps pop3 pop3s # A space separated list of IP or host addresses where to listen in for # connections. * listens in all IPv4 interfaces. [::] listens in all IPv6 # interfaces. Use *, [::] for listening both IPv4 and IPv6. # # If you want to specify ports for each service, you will need to configure # these settings inside the protocol imap/pop3/managesieve { ... } section, # so you can specify different ports for IMAP/POP3/MANAGESIEVE. For example: # protocol imap { # listen = *:10143 # ssl_listen = *:10943 # .. # } # protocol pop3 { # listen = *:10100 # .. # } # protocol managesieve { # listen = *:12000 # .. # } #listen = * # Disable LOGIN command and all other plaintext authentications unless # SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP # matches the local IP (ie. you're connecting from the same computer), the # connection is considered secure and plaintext authentication is allowed. #disable_plaintext_auth = yes # Should all IMAP and POP3 processes be killed when Dovecot master process # shuts down. Setting this to no means that Dovecot can be upgraded without # forcing existing client connections to close (although that could also be # a problem if the upgrade is eg. because of a security fix). This however # means that after master process has died, the client processes can't write # to log files anymore. #shutdown_clients = yes ## ## Logging ## # Log file to use for error messages, instead of sending them to syslog. # /dev/stderr can be used to log into stderr. log_path = # Log file to use for informational and debug messages. # Default is the same as log_path. #info_log_path = # Prefix for each line written to log file. % codes are in strftime(3) # format. #log_timestamp = %b %d %H:%M:%S log_timestamp = %Y-%m-%d %H:%M:%S # Syslog facility to use if you're logging to syslog. Usually if you don't # want to use mail, you'll use local0..local7. Also other standard # facilities are supported. #syslog_facility = mail ## ## SSL settings ## # IP or host address where to listen in for SSL connections. Remember to also # add imaps and/or pop3s to protocols setting. Defaults to same as listen # setting if not specified. #ssl_listen = # Disable SSL/TLS support. doc/wiki/SSL #ssl_disable = no # PEM encoded X.509 SSL/TLS certificate and private key. They're opened before # dropping root privileges, so keep the key file unreadable by anyone but # root. #ssl_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem #ssl_key_file = /etc/ssl/private/ssl-cert-snakeoil.key # If key file is password protected, give the password here. Alternatively # give it when starting dovecot with -p parameter. Since this file is often # world-readable, you may want to place this setting instead to a different # root owned 0600 file by using !include_try path. #ssl_key_password = # File containing trusted SSL certificate authorities. Set this only if you # intend to use ssl_verify_client_cert=yes. The CAfile should contain the # CA-certificate(s) followed by the matching CRL(s). #ssl_ca_file = # Request client to send a certificate. If you also want to require it, set #
[Bug 790982] [NEW] package bacula-director-mysql (not installed) failed to install/upgrade: sub-processo script post-installation instalado retornou estado de saída de erro 1
Public bug reported: Binary package hint: bacula eu não sei usar este reportador de bugs ProblemType: Package DistroRelease: Ubuntu 11.04 Package: bacula-director-mysql (not installed) ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic x86_64 NonfreeKernelModules: nvidia wl Architecture: amd64 Date: Mon May 30 23:45:46 2011 ErrorMessage: sub-processo script post-installation instalado retornou estado de saída de erro 1 InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release amd64 (20110427.1) SourcePackage: bacula Title: package bacula-director-mysql (not installed) failed to install/upgrade: sub-processo script post-installation instalado retornou estado de saída de erro 1 UpgradeStatus: No upgrade log present (probably fresh install) ** Affects: bacula (Ubuntu) Importance: Undecided Status: New ** Tags: amd64 apport-package natty -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to bacula in Ubuntu. https://bugs.launchpad.net/bugs/790982 Title: package bacula-director-mysql (not installed) failed to install/upgrade: sub-processo script post-installation instalado retornou estado de saída de erro 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790982] Re: package bacula-director-mysql (not installed) failed to install/upgrade: sub-processo script post-installation instalado retornou estado de saída de erro 1
-- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to bacula in Ubuntu. https://bugs.launchpad.net/bugs/790982 Title: package bacula-director-mysql (not installed) failed to install/upgrade: sub-processo script post-installation instalado retornou estado de saída de erro 1 -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 747068] Re: /tmp = EXT3, the VM images gives EXT4-fs error
[Expired for vm-builder (Ubuntu) because there has been no activity for 60 days.] ** Changed in: vm-builder (Ubuntu) Status: Incomplete = Expired -- You received this bug notification because you are a member of Ubuntu Server Team, which is subscribed to vm-builder in Ubuntu. https://bugs.launchpad.net/bugs/747068 Title: /tmp = EXT3, the VM images gives EXT4-fs error -- Ubuntu-server-bugs mailing list Ubuntu-server-bugs@lists.ubuntu.com Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs
[Bug 790490] [NEW] package firmware-b43-installer 4.150.10.5-5 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1
Public bug reported: Binary package hint: b43-fwcutter Error message on install ProblemType: Package DistroRelease: Ubuntu 11.04 Package: firmware-b43-installer 4.150.10.5-5 ProcVersionSignature: Ubuntu 2.6.35-28.50-generic 2.6.35.11 Uname: Linux 2.6.35-28-generic i686 NonfreeKernelModules: wl Architecture: i386 Date: Thu May 26 00:00:40 2011 ErrorMessage: ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationMedia: Ubuntu-Netbook 10.10 Maverick Meerkat - Release i386 (20101007) PackageArchitecture: all SourcePackage: b43-fwcutter Title: package firmware-b43-installer 4.150.10.5-5 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1 UpgradeStatus: Upgraded to natty on 2011-05-26 (5 days ago) ** Affects: b43-fwcutter (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 natty ubuntu-une -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790490 Title: package firmware-b43-installer 4.150.10.5-5 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790490] Re: package firmware-b43-installer 4.150.10.5-5 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790490 Title: package firmware-b43-installer 4.150.10.5-5 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790488] [NEW] Sync giblib 1.2.4-6 (universe) from Debian unstable (main)
Public bug reported: Please sync giblib 1.2.4-6 (universe) from Debian unstable (main) Explanation of the Ubuntu delta and why it can be dropped: Debian dropped the .la files Changelog entries since current oneiric version 1.2.4-5ubuntu1: giblib (1.2.4-6) unstable; urgency=low * debian/giblib1.symbols: Add Build-Depends-Package header. * debian/control: Upgrade Standards-Version to 3.9.1.0. * debian/control, debian/compat, debian/rules: Switch to dh instead of cdbs, upgrade to dh compatibility level 8. * debian/giblib-dev.install: Drop the unneeded .la files. (Closes: #620599) -- Eric Dorland e...@debian.org Sun, 03 Apr 2011 20:31:02 -0400 ** Affects: giblib (Ubuntu) Importance: Wishlist Status: Confirmed ** Changed in: giblib (Ubuntu) Importance: Undecided = Wishlist ** Changed in: giblib (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790488 Title: Sync giblib 1.2.4-6 (universe) from Debian unstable (main) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790486] Re: rabbitmq stomp plugin crashes due to undefined function
Ah, I found this discussion on the RabbitMQ list: http://lists.rabbitmq.com/pipermail/rabbitmq-discuss/2011-March/012189.html It seems the bug is that Ubuntu's version of Erlang is too old to contain the required function. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790486 Title: rabbitmq stomp plugin crashes due to undefined function -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790346] Re: [Conexant ID 5069] Playback problem - Headphone jack sense not working
apport information ** Tags added: apport-collected ** Description changed: Hello, I am using ASUS P52F notebook. I am facing strange problem the headphone is not detected and I am not getting Headphone jack sense option in sound preferences. I've different methods suggested ubuntu forums. But nothing works for me. Barinder ProblemType: Bug DistroRelease: Ubuntu 10.04 Package: alsa-base 1.0.22.1+dfsg-0ubuntu3 ProcVersionSignature: Ubuntu 2.6.32-32.62-generic-pae 2.6.32.38+drm33.16 Uname: Linux 2.6.32-32-generic-pae i686 AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21. Architecture: i386 ArecordDevices: List of CAPTURE Hardware Devices card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic] Subdevices: 1/1 Subdevice #0: subdevice #0 AudioDevicesInUse: USERPID ACCESS COMMAND /dev/snd/controlC0: barinder 2947 F pulseaudio Card0.Amixer.info: Card hw:0 'Intel'/'HDA Intel at 0xd540 irq 22' Mixer name : 'Intel G45 DEVIBX' Components : 'HDA:14f15069,104311f3,00100302 HDA:80862804,80860101,0010' Controls : 10 Simple ctrls : 5 Date: Tue May 31 01:01:01 2011 InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) PackageArchitecture: all ProcEnviron: LANG=en_IN SHELL=/bin/bash SelectedCard: 0 Intel HDA-Intel - HDA Intel SourcePackage: alsa-driver Symptom: audio Title: [Conexant ID 5069] Playback problem dmi.bios.date: 12/10/2010 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: P52F.204 dmi.board.asset.tag: ATN12345678901234567 dmi.board.name: P52F dmi.board.vendor: ASUSTeK Computer Inc. dmi.board.version: 1.0 dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 10 dmi.chassis.vendor: ASUSTeK Computer Inc. dmi.chassis.version: 1.0 dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP52F.204:bd12/10/2010:svnASUSTeKComputerInc.:pnP52F:pvr1.0:rvnASUSTeKComputerInc.:rnP52F:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr1.0: dmi.product.name: P52F dmi.product.version: 1.0 dmi.sys.vendor: ASUSTeK Computer Inc. + --- + AlsaVersion: + Advanced Linux Sound Architecture Driver Version 1.0.24. + Compiled on May 30 2011 for kernel 2.6.32-32-generic-pae (SMP). + Architecture: i386 + ArecordDevices: + List of CAPTURE Hardware Devices + card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog] +Subdevices: 1/1 +Subdevice #0: subdevice #0 + AudioDevicesInUse: + USERPID ACCESS COMMAND + /dev/snd/controlC0: barinder 2050 F pulseaudio + Card0.Amixer.info: + Card hw:0 'Intel'/'HDA Intel at 0xd540 irq 31' +Mixer name : 'Intel IbexPeak HDMI' +Components : 'HDA:14f15069,104311f3,00100302 HDA:80862804,80860101,0010' +Controls : 13 +Simple ctrls : 10 + DistroRelease: Ubuntu 10.04 + InstallationMedia: Ubuntu 10.04 LTS Lucid Lynx - Release i386 (20100429) + Package: alsa-driver (not installed) + ProcEnviron: + LANG=en_IN + SHELL=/bin/bash + ProcVersionSignature: Ubuntu 2.6.32-32.62-generic-pae 2.6.32.38+drm33.16 + Tags: lucid + Uname: Linux 2.6.32-32-generic-pae i686 + UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare + dmi.bios.date: 12/10/2010 + dmi.bios.vendor: American Megatrends Inc. + dmi.bios.version: P52F.204 + dmi.board.asset.tag: ATN12345678901234567 + dmi.board.name: P52F + dmi.board.vendor: ASUSTeK Computer Inc. + dmi.board.version: 1.0 + dmi.chassis.asset.tag: No Asset Tag + dmi.chassis.type: 10 + dmi.chassis.vendor: ASUSTeK Computer Inc. + dmi.chassis.version: 1.0 + dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvrP52F.204:bd12/10/2010:svnASUSTeKComputerInc.:pnP52F:pvr1.0:rvnASUSTeKComputerInc.:rnP52F:rvr1.0:cvnASUSTeKComputerInc.:ct10:cvr1.0: + dmi.product.name: P52F + dmi.product.version: 1.0 + dmi.sys.vendor: ASUSTeK Computer Inc. ** Attachment added: AlsaDevices.txt https://bugs.edge.launchpad.net/bugs/790346/+attachment/2148566/+files/AlsaDevices.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790346 Title: [Conexant ID 5069] Playback problem - Headphone jack sense not working -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790346] AplayDevices.txt
apport information ** Attachment added: AplayDevices.txt https://bugs.edge.launchpad.net/bugs/790346/+attachment/2148567/+files/AplayDevices.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790346 Title: [Conexant ID 5069] Playback problem - Headphone jack sense not working -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790346] BootDmesg.txt
apport information ** Attachment added: BootDmesg.txt https://bugs.edge.launchpad.net/bugs/790346/+attachment/2148568/+files/BootDmesg.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790346 Title: [Conexant ID 5069] Playback problem - Headphone jack sense not working -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790346] Card0.Amixer.values.txt
apport information ** Attachment added: Card0.Amixer.values.txt https://bugs.edge.launchpad.net/bugs/790346/+attachment/2148569/+files/Card0.Amixer.values.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790346 Title: [Conexant ID 5069] Playback problem - Headphone jack sense not working -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790346] Card0.Codecs.codec.0.txt
apport information ** Attachment added: Card0.Codecs.codec.0.txt https://bugs.edge.launchpad.net/bugs/790346/+attachment/2148570/+files/Card0.Codecs.codec.0.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790346 Title: [Conexant ID 5069] Playback problem - Headphone jack sense not working -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790346] Card0.Codecs.codec.3.txt
apport information ** Attachment added: Card0.Codecs.codec.3.txt https://bugs.edge.launchpad.net/bugs/790346/+attachment/2148571/+files/Card0.Codecs.codec.3.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790346 Title: [Conexant ID 5069] Playback problem - Headphone jack sense not working -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790346] CurrentDmesg.txt
apport information ** Attachment added: CurrentDmesg.txt https://bugs.edge.launchpad.net/bugs/790346/+attachment/2148572/+files/CurrentDmesg.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790346 Title: [Conexant ID 5069] Playback problem - Headphone jack sense not working -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790346] PciMultimedia.txt
apport information ** Attachment added: PciMultimedia.txt https://bugs.edge.launchpad.net/bugs/790346/+attachment/2148573/+files/PciMultimedia.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790346 Title: [Conexant ID 5069] Playback problem - Headphone jack sense not working -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790346] ProcCpuinfo.txt
apport information ** Attachment added: ProcCpuinfo.txt https://bugs.edge.launchpad.net/bugs/790346/+attachment/2148574/+files/ProcCpuinfo.txt -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790346 Title: [Conexant ID 5069] Playback problem - Headphone jack sense not working -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 381543] Re: Calc VLOOKUP function doesn't produce same results as Excel
** Bug watch added: freedesktop.org Bugzilla #37776 http://bugs.freedesktop.org/show_bug.cgi?id=37776 ** Also affects: df-libreoffice via http://bugs.freedesktop.org/show_bug.cgi?id=37776 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/381543 Title: Calc VLOOKUP function doesn't produce same results as Excel -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790494] [NEW] Sync grads 2.0.a9-1 (universe) from Debian unstable (main)
Public bug reported: Please sync grads 2.0.a9-1 (universe) from Debian unstable (main) Explanation of the Ubuntu delta and why it can be dropped: Debian seems to have integrated the patch from Ubuntu with changes for the new upstram version Changelog entries since current oneiric version 2.0.a8-2ubuntu1: grads (2.0.a9-1) unstable; urgency=low * New upstream release. * Now at Standards-Version: 3.9.2. * Fix by Steve Langasek to avoid hard-coded /usr/lib paths; for multilib. Closes: #622320. * Include libshp-dev for shapefile support in new version. * Include patch from Nicolai Strange fixing netcdf time units parse bug. Closes: #587496. -- Alastair McKinstry mckins...@debian.org Tue, 12 Apr 2011 14:31:38 +0100 ** Affects: grads (Ubuntu) Importance: Wishlist Status: Confirmed ** Changed in: grads (Ubuntu) Importance: Undecided = Wishlist ** Changed in: grads (Ubuntu) Status: New = Confirmed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790494 Title: Sync grads 2.0.a9-1 (universe) from Debian unstable (main) -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790491] [NEW] package ttf-droid 1.00~b112 dfsg 1-0ubuntu1 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1
Public bug reported: Binary package hint: ttf-droid Ubuntu 11.04 unable to install nor remove any update, always get a unable to open ttf-droid error 1. ProblemType: Package DistroRelease: Ubuntu 11.04 Package: ttf-droid 1.00~b112+dfsg+1-0ubuntu1 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic i686 NonfreeKernelModules: fglrx Architecture: i386 Date: Tue May 31 00:50:17 2011 ErrorMessage: ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1) PackageArchitecture: all SourcePackage: ttf-droid Title: package ttf-droid 1.00~b112+dfsg+1-0ubuntu1 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1 UpgradeStatus: Upgraded to natty on 2011-05-31 (0 days ago) ** Affects: ttf-droid (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 natty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790491 Title: package ttf-droid 1.00~b112 dfsg 1-0ubuntu1 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790491] Re: package ttf-droid 1.00~b112 dfsg 1-0ubuntu1 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790491 Title: package ttf-droid 1.00~b112 dfsg 1-0ubuntu1 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790491] Re: package ttf-droid 1.00~b112 dfsg 1-0ubuntu1 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1
I'll appreciate your help, thanks. Alex D' -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790491 Title: package ttf-droid 1.00~b112 dfsg 1-0ubuntu1 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790426] Re: package ifupdown 0.6.8ubuntu29.2 failed to install/upgrade: package ifupdown is already installed and configured
*** This bug is a duplicate of bug 541595 *** https://bugs.launchpad.net/bugs/541595 ** This bug has been marked a duplicate of bug 790424 package udev 151-12.3 failed to install/upgrade: package udev is already installed and configured ** This bug is no longer a duplicate of bug 790424 package udev 151-12.3 failed to install/upgrade: package udev is already installed and configured ** This bug has been marked a duplicate of bug 541595 [Master] package failed to install/upgrade: package is already installed and configured -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790426 Title: package ifupdown 0.6.8ubuntu29.2 failed to install/upgrade: package ifupdown is already installed and configured -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790425] Re: package dmsetup 2:1.02.39-1ubuntu4.1 failed to install/upgrade: package dmsetup is already installed and configured
*** This bug is a duplicate of bug 541595 *** https://bugs.launchpad.net/bugs/541595 ** This bug has been marked a duplicate of bug 790424 package udev 151-12.3 failed to install/upgrade: package udev is already installed and configured ** This bug is no longer a duplicate of bug 790424 package udev 151-12.3 failed to install/upgrade: package udev is already installed and configured ** This bug has been marked a duplicate of bug 541595 [Master] package failed to install/upgrade: package is already installed and configured -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790425 Title: package dmsetup 2:1.02.39-1ubuntu4.1 failed to install/upgrade: package dmsetup is already installed and configured -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790424] Re: package udev 151-12.3 failed to install/upgrade: package udev is already installed and configured
*** This bug is a duplicate of bug 541595 *** https://bugs.launchpad.net/bugs/541595 ** This bug has been marked a duplicate of bug 541595 [Master] package failed to install/upgrade: package is already installed and configured -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790424 Title: package udev 151-12.3 failed to install/upgrade: package udev is already installed and configured -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 780049] Re: wine 1.3.19 cannot found oss driver
I'm confirming that it affects me as well, I'm also using OSS4, and am using the Wine PPA. I've read this: https://bbs.archlinux.org/viewtopic.php?pid=927685 However, the upgrade to 1.3.21 in the PPA has not fixed this. ** Tags added: oss regression -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/780049 Title: wine 1.3.19 cannot found oss driver -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790497] [NEW] can't load card styles in Spider
Public bug reported: Binary package hint: gnome-games When I open the window to install card themes the install button is dimmed. ProblemType: Bug DistroRelease: Ubuntu 11.04 Package: aisleriot 1:2.32.1-0ubuntu5 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic i686 Architecture: i386 CheckboxSubmission: b3809b8803a03ae5a18da3dd20fbdc1a CheckboxSystem: 6ce041aeed0a2c17b3343b66d157175d Date: Mon May 30 23:05:21 2011 ProcEnviron: LANGUAGE=en_US:en LANG=en_US.UTF-8 SHELL=/bin/bash SourcePackage: gnome-games UpgradeStatus: Upgraded to natty on 2011-05-30 (0 days ago) ** Affects: gnome-games (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug apport-lpi i386 natty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790497 Title: can't load card styles in Spider -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790497] Re: can't load card styles in Spider
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790497 Title: can't load card styles in Spider -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790496] [NEW] FTBFS: znc depends on fix in swig 2.0.3 to work with Python 3.2
Public bug reported: Binary package hint: znc The znc package is FTBFS on Oneiric. This is noted in Debian as a version upgrade problem from Python 3.1 to 3.2. The failure messages are: compiler.cpp:(.text+0x19): undefined reference to `PyErr_Print' compiler.cpp:(.text+0x1e): undefined reference to `Py_Finalize' /tmp/ccLyjvoU.o: In function `main': compiler.cpp:(.text+0x49): undefined reference to `Py_Initialize' compiler.cpp:(.text+0x57): undefined reference to `PyImport_ImportModule' compiler.cpp:(.text+0x85): undefined reference to `PyObject_GetAttrString' compiler.cpp:(.text+0xab): undefined reference to `_Py_TrueStruct' compiler.cpp:(.text+0xd5): undefined reference to `Py_BuildValue' compiler.cpp:(.text+0x107): undefined reference to `Py_BuildValue' compiler.cpp:(.text+0x13b): undefined reference to `PyObject_Call' compiler.cpp:(.text+0x158): undefined reference to `Py_Finalize' (From https://launchpadlibrarian.net/71133981/buildlog_ubuntu- oneiric-i386.znc_0.098-2_FAILEDTOBUILD.txt.gz) This is fixed upstream in swig, and in the swig2.0 packages in Debian sid. Switching znc to the swig2.0 package might allow it to build with Python 3.2, but, as noted in the Debian bug report, it might also require additional porting. ** Affects: znc (Ubuntu) Importance: Undecided Status: New ** Affects: znc (Debian) Importance: Unknown Status: Unknown ** Tags: ftbfs oneiric python32 ** Bug watch added: Debian Bug tracker #622980 http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=622980 ** Also affects: znc (Debian) via http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=622980 Importance: Unknown Status: Unknown -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790496 Title: FTBFS: znc depends on fix in swig 2.0.3 to work with Python 3.2 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 782428] Re: ntoskrnl.exe is corrupt or missing after Ubuntu Natty install
Do you need more info? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/782428 Title: ntoskrnl.exe is corrupt or missing after Ubuntu Natty install -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 760131] Re: Power consumption raised significantly in natty
Has anyone tried powertop2? It differs from powertop (gets data from kernel's perf infrastructure) and might give a hint on power burner. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/760131 Title: Power consumption raised significantly in natty -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790498] [NEW] package grub-pc 1.99~rc1-13ubuntu3 failed to install/upgrade: il sottoprocesso vecchio script di post-installation ha restituito lo stato di errore 1
Public bug reported: Binary package hint: grub2 I don't know ProblemType: Package DistroRelease: Ubuntu 11.04 Package: grub-pc 1.99~rc1-13ubuntu3 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic i686 NonfreeKernelModules: nvidia Architecture: i386 Date: Sat May 28 13:26:16 2011 ErrorMessage: il sottoprocesso vecchio script di post-installation ha restituito lo stato di errore 1 InstallationMedia: Ubuntu 10.10 Maverick Meerkat - Release i386 (20101007) ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=6e3a9ded-1aef-40b0-9382-9926e02e5572 ro quiet splash vt.handoff=7 SourcePackage: grub2 Title: package grub-pc 1.99~rc1-13ubuntu3 failed to install/upgrade: il sottoprocesso vecchio script di post-installation ha restituito lo stato di errore 1 UpgradeStatus: Upgraded to natty on 2011-05-28 (2 days ago) ** Affects: grub2 (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 natty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790498 Title: package grub-pc 1.99~rc1-13ubuntu3 failed to install/upgrade: il sottoprocesso vecchio script di post-installation ha restituito lo stato di errore 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790498] Re: package grub-pc 1.99~rc1-13ubuntu3 failed to install/upgrade: il sottoprocesso vecchio script di post-installation ha restituito lo stato di errore 1
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790498 Title: package grub-pc 1.99~rc1-13ubuntu3 failed to install/upgrade: il sottoprocesso vecchio script di post-installation ha restituito lo stato di errore 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 787937] Re: [MIR] pyatspi
Saw the upoad fixing the typo in debian/copyright. Promoting to main now. Thanks! ** Changed in: pyatspi (Ubuntu) Status: Incomplete = Fix Committed -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/787937 Title: [MIR] pyatspi -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 786154] Re: Disconnecting mobile broadband connection freezes Kubuntu
I can confirm that too. Huawei E1820, amd64. After 5 minutes plasma starts to work normally, but I'm unable to reconnect. The same occurs with VPN connections, so it must be nm-manager plasmoid bug. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/786154 Title: Disconnecting mobile broadband connection freezes Kubuntu -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 772864] Re: Banshee won't see mp3 player
Did it again and got the same result. MP4 player is plugged in libmtp version: 1.0.6 Listing raw device(s) No raw devices found. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/772864 Title: Banshee won't see mp3 player -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 787937] Re: [MIR] pyatspi
2011-05-31 06:33:54 INFOOverride Component to: 'main' 2011-05-31 06:33:54 INFO'pyatspi - 2.1.1-0ubuntu3/universe/misc' source overridden 2011-05-31 06:33:54 INFO 'python-pyatspi2-2.1.1-0ubuntu3/universe/python/OPTIONAL' binary overridden in oneiric/amd64 2011-05-31 06:33:54 INFO 'python-pyatspi2-2.1.1-0ubuntu3/universe/python/OPTIONAL' binary overridden in oneiric/armel 2011-05-31 06:33:54 INFO 'python-pyatspi2-2.1.1-0ubuntu3/universe/python/OPTIONAL' binary overridden in oneiric/i386 2011-05-31 06:33:54 INFO 'python-pyatspi2-2.1.1-0ubuntu3/universe/python/OPTIONAL' binary overridden in oneiric/powerpc ** Changed in: pyatspi (Ubuntu) Status: Fix Committed = Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/787937 Title: [MIR] pyatspi -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790499] [NEW] package ttf-droid 1.00~b112+dfsg+1-0ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
Public bug reported: Binary package hint: ttf-droid unable to install recommendation packages ProblemType: Package DistroRelease: Ubuntu 11.04 Package: ttf-droid 1.00~b112+dfsg+1-0ubuntu1 ProcVersionSignature: Ubuntu 2.6.38-8.42-generic 2.6.38.2 Uname: Linux 2.6.38-8-generic i686 NonfreeKernelModules: fglrx Architecture: i386 Date: Tue May 31 01:34:46 2011 ErrorMessage: subprocess installed post-installation script returned error exit status 1 InstallationMedia: Ubuntu 11.04 Natty Narwhal - Release i386 (20110427.1) PackageArchitecture: all SourcePackage: ttf-droid Title: package ttf-droid 1.00~b112+dfsg+1-0ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 UpgradeStatus: Upgraded to natty on 2011-05-31 (0 days ago) ** Affects: ttf-droid (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package i386 natty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790499 Title: package ttf-droid 1.00~b112+dfsg+1-0ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790499] Re: package ttf-droid 1.00~b112+dfsg+1-0ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790499 Title: package ttf-droid 1.00~b112+dfsg+1-0ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790500] [NEW] Typo string 39
Public bug reported: Binary package hint: sessioninstaller The file '%s' isn't a valid software catalog. Please redownload or contanct the provider. Contanct should be contact. ** Affects: sessioninstaller (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790500 Title: Typo string 39 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 789688] Re: UbuntuHashes doesn't contains SHA256
Belabela, Publicly editable does not mean it's insecure. The Wiki does keep track of all edits so that an audit can happen. By your theory the information you linked to on Wikipedia is insecure as well, because I can go and edit it freely and forge all kinds of information. HTTPS does not make an editable wiki more secure. Aside from that, you can also compare each version (edit.) You would need to compromise the back-end to the wiki to forge the edit, and even then an admin can go back and revert the edit and disclose the false edit warning the community at large that a compromise happened and that they should validate their ISO's if downloaded during that given time frame. To also note, everything on those mirrors is directly from Ubuntu, they do not create the sums themselves and Ubuntu provides sums, as you can clearly see here at http://cdimage.ubuntu.com/releases/11.04/release/SHA256SUMS and http://cdimage.ubuntu.com/releases/11.04/release/SHA1SUMS. As far as the HTTPS, my suggestion is that you create a separate bug for that and request that they add HTTPS to the CDIMAGE site. ** Changed in: ubuntu-docs (Ubuntu) Status: Confirmed = Opinion -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/789688 Title: UbuntuHashes doesn't contains SHA256 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790453] Re: can not open home folder from main menu.
*** This bug is a duplicate of bug 667071 *** https://bugs.launchpad.net/bugs/667071 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug #667071, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 667071 Folders opened by wrong application -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790453 Title: can not open home folder from main menu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790440] Re: package samba4 4.0.0~alpha15~git20110124.dfsg1-2ubuntu1 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1
*** This bug is a duplicate of bug 728840 *** https://bugs.launchpad.net/bugs/728840 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug #728840, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 728840 upgradeprovision crashed with LdbError in connect(): (80, 'Failed to load modules from: /usr/lib/samba/ldb\n') -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790440 Title: package samba4 4.0.0~alpha15~git20110124.dfsg1-2ubuntu1 failed to install/upgrade: ErrorMessage: subprocess installed post-installation script returned error exit status 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 790415] Re: package samba4 4.0.0~alpha15~git20110124.dfsg1-2ubuntu1 failed to install/upgrade: ErrorMessage: el subproceso instalado el script post-installation devolvió el código de salida de er
*** This bug is a duplicate of bug 728840 *** https://bugs.launchpad.net/bugs/728840 Thank you for taking the time to report this bug and helping to make Ubuntu better. This particular bug has already been reported and is a duplicate of bug #728840, so it is being marked as such. Please look at the other bug report to see if there is any missing information that you can provide, or to see if there is a workaround for the bug. Additionally, any further discussion regarding the bug should occur in the other report. Feel free to continue to report any other bugs you may find. ** This bug has been marked a duplicate of bug 728840 upgradeprovision crashed with LdbError in connect(): (80, 'Failed to load modules from: /usr/lib/samba/ldb\n') -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/790415 Title: package samba4 4.0.0~alpha15~git20110124.dfsg1-2ubuntu1 failed to install/upgrade: ErrorMessage: el subproceso instalado el script post- installation devolvió el código de salida de error 1 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs