I have also seen this issue. It seems to be Firefox on my machine also. I
thought it was just my system, but I recently upgraded to 4GB of RAM and still
am using swap with only a few programs running (Konsole, Firefox, KVirc):
$ free -m
total used free shared
*** This bug is a duplicate of bug 359395 ***
https://bugs.launchpad.net/bugs/359395
** Attachment added: Dependencies.txt
https://bugs.launchpad.net/bugs/647797/+attachment/1636718/+files/Dependencies.txt
** Attachment added: ProcMaps.txt
The bug is a misnamed file in the uefi installer for 12.04.2, causing
installations to fail. Therefore, a log cannot be collected.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1172065
Title:
Public bug reported:
The short version is that 1.99.3 (the package available for saucy) is
100% broken. Any chance of updating the package? The long version can
be found here:
https://github.com/troglobit/inadyn/pull/40
** Affects: inadyn (Ubuntu)
Importance: Undecided
Status:
Sorry it took me so long to get back around to this, but I can confirm
that the proposed package is working properly.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1270539
Title:
inadyn 1.99.3
Here are the details from my system to show it functioning (log
obfuscated to remove identifying information):
$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description:Ubuntu 13.10
Release:13.10
Codename: saucy
$ dpkg -l inadyn
Ok, well, I notice too late that I left the base 64 credentials in the
log output. But no worries, it was not a password I used anywhere else
and I have changed it.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
After installing the v4l2loopback-dkms module, I am not able to load it
into the kernel. Attempting to load the module results in the
following:
$ sudo modprobe -v v4l2loopback
insmod /lib/modules/3.11.0-17-generic/updates/dkms/v4l2loopback.ko
ERROR: could not insert
Public bug reported:
The summary pretty much says it all. This is a known bug in touchegg
1.1.1 and it is fixed in SVN trunk. This is documented at the following
URL:
https://code.google.com/p/touchegg/issues/detail?id=177
I've confirmed this myself by doing an svn checkout
Moving from Ubuntu neutron-lbaas package project to Octavia, the new
owner for neutron-lbaas.
** Package changed: neutron-lbaas (Ubuntu) => octavia
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
Xenial hosts that run apt-get update; apt-get dist-upgrade are getting
2.8 (zesty) versions of the qemu packages.
Example:
Unpacking qemu-system-x86 (1:2.8+dfsg-3ubuntu2.3~cloud0) over
(1:2.5+dfsg-5ubuntu10.14) ...
This is causing instances to not boot under qemu as the
Ok, so I do develop against OpenStack, so somehow it looks like I got an
ocata repo added.
However, I think their might still be an issue as it is still xenial-
updates.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
qemu-system-x86:
Installed: 1:2.8+dfsg-3ubuntu2.3~cloud0
Candidate: 1:2.8+dfsg-3ubuntu2.3~cloud0
Version table:
*** 1:2.8+dfsg-3ubuntu2.3~cloud0 500
500 http://ubuntu-cloud.archive.canonical.com/ubuntu
xenial-updates/ocata/main amd64 Packages
100 /var/lib/dpkg/status
So if the package came from http://ubuntu-
cloud.archive.canonical.com/ubuntu xenial-updates/ocata/main amd64
Packages
It appears that the xenial-updates/ocata/main repository has zesty
packages in it where it should only have xenial. Correct?
--
You received this bug notification because you
Marking invalid due to v1 driver.
** Changed in: octavia
Status: New => Invalid
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1674156
Title:
neutron-lbaasv2-agent: TypeError: argument of
My mis-understanding of the cloud archive goal (latest LTS with a given
OpenStack release).
I also found what was inserting that apt source on my host (devstack) and will
disable it.
** Changed in: qemu (Ubuntu)
Status: Incomplete => Invalid
--
You received this bug notification
** No longer affects: neutron
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1495430
Title:
delete lbaasv2 can't delete lbaas namespace automatically.
To manage notifications about this bug go to:
Public bug reported:
The Bionic Beaver (18.04 LTS) release should include the released
HAProxy 1.8-stable version instead of 1.7.9 that Artful Aardvark
includes.
1.8-stable includes improvements to systemd support, threading, TLS, and
reload that would be beneficial to have in the next LTS
I am seeing this on a Intel Corporation Ethernet Connection I218-V.
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=18.04
DISTRIB_CODENAME=bionic
DISTRIB_DESCRIPTION="Ubuntu 18.04.2 LTS"
Linux server 4.15.0-54-generic #58-Ubuntu SMP Mon Jun 24 10:55:24 UTC
2019 x86_64 x86_64 x86_64 GNU/Linux
Jun 27 22:16:23
I am experimenting with disabling tso via ethtool now.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1785171
Title:
Intel I219-V Ethernet Interface on Ubuntu Linux Using e1000e Driver
keeps
Disabling TSO does not resolve the issue.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1785171
Title:
Intel I219-V Ethernet Interface on Ubuntu Linux Using e1000e Driver
keeps Dropping Internet
The above error is that the nova compute flavor specified "d49b897b-
1ba9-4334-8788-2fc467052d0a" is not present or accessible in nova.
The below "openstack loadbalancer flavor list" is listing the Octavia
flavors, not the nova compute flavor that is causing the nova compute
build failure.
--
I loaded up a new card to do a minicom dump for you and now I cannot reproduce
this either.
This puzzles me as I tried a bunch of things to try to get this to work and
ended up having to build custom u-boot packages.
The only thing I can think is I had a bad microsd card. Sorry and thanks for
Public bug reported:
This is a feature request as opposed to a bug.
I would be super handy to have the following settings enabled by default
in the Raspberry Pi Ubuntu u-boot package.
CONFIG_AUTOBOOT_KEYED
CONFIG_AUTOBOOT_DELAY_STR "delay"
CONFIG_AUTOBOOT_STOP_STR "stop"
The documentation for
Public bug reported:
Description:Ubuntu 19.10
Release:19.10
Package: u-boot-rpi (2019.07+dfsg-1ubuntu3)
On a Raspberry Pi 3 model B, I can interrupt the u-boot process and use
the following two commands to disable the boot delay. I do this as I
have a GPS device attached to the
Public bug reported:
Hi,
I am unable to connect and print with a HP USB Pinter on Ubuntu 20.04,
Spent some time troubleshooting with the default (previously current) drivers
hplip ver. 3.20.3 , but Ubuntu 20.04 does not seem to be supported officially
due to missing dependencies. Errors about
It looks several others have been having problems with hplip in 20.04
Answer 690278 is similar.
As I already noted Answer 690720 is also similar.
I have attempted to purge all references to hplip and re-install the
packages included in 20.04 (which install 3.20.3) but that does not seem
to
I have the same problem on aarch64 20.04.
# dpkg --list | grep venv
ii python3-venv 3.8.2-0ubuntu2
arm64pyvenv-3 binary for python3 (default python3 version)
ii python3.8-venv 3.8.2-1ubuntu1.1
arm64
*** This bug is a duplicate of bug 1892871 ***
https://bugs.launchpad.net/bugs/1892871
Thank you!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1890314
Title:
RFE HAProxy 2.2 for groovy
To
FYI, I have been running on the latest version of this driver from Intel
without issue for months now. It appears to be resolved in the upstream
driver.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Also as requested,
Anyone with problems here, please
- If you have a Snap of HPLIP installed, uninstall it, the one I know of is
experimental
>no snap installed
$ snap list
Name Version Rev Tracking Publisher
Notes
canonical-livepatch 9.5.5
Sorry for the delayed response.
In response to my own comment, I'm still seeing that log about missing
"/usr/lib/cups/backend/hp"
But it actually exists (i didn't copy it)
~$ ls -al /usr/lib/cups/backend/hp
-rwxr-xr-x 1 root root 22832 Mar 31 23:51 /usr/lib/cups/backend/hp
Anyway as
Public bug reported:
Is there any chance of getting HAProxy 2.2.x (LTS) into the 20.10 groovy
release?
** Affects: haproxy (Ubuntu)
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I was unable to get driverless printing working from local machine.
I was able to get driverless printing working from Network, but to
configure this printer on a WiFi network I required a different computer
with working software (was able to borrow a Windows system with working
software).
Once
Seems to be the same bug as 1878974 , although this one may have a
better description.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1881401
Title:
HPLIP, hp-doctor, hp-check should support Ubuntu
Seems to be the same bug as 1881401 , although the other one may have a
better description.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1878974
Title:
Unable to use HP USB Printer in Ubuntu 20.04
The above error is from an Ussuri or newer version of octavia-dashboard. Please
install the Train version of Octavia dashboard.
Specifically, you have Ussuri or newer octavia-dashboard and openstacksdk from
Train or older.
Train did not support availability zones.
--
You received this bug
Public bug reported:
??
ProblemType: Package
DistroRelease: Ubuntu 16.04
Package: grub-efi-amd64-signed 1.66.26+2.02~beta2-36ubuntu3.26
ProcVersionSignature: Ubuntu 4.4.0-186.216-lowlatency 4.4.228
Uname: Linux 4.4.0-186-lowlatency x86_64
ApportVersion: 2.20.1-0ubuntu2.23
Architecture: amd64
Did you have the distributed locking service enabled, even for the
single process deployment?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1940976
Title:
Race condition in zone serial generation
Yes, that is what I am asking about.
The configuration setting:
[coordination]
backend_url =
Such that the threads are using the distributed lock manager.
You can also look for this warning message:
I also encountered this issue, Ubuntu 21.10. Workaround proposed by
Mario Di Nicola (warp99) worked for me as well (editing the python
script to import GTK 3.0).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
upper-constraints was updated in yoga to 2.1.0, so yoga forward this
issue is resolved.
** Changed in: designate
Status: Confirmed => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Description changed:
qemu will not start VMs using spice or vnc displays unless there is a
routable IPv4 address on the machine, even though the error relates to
127.0.0.1
root@athens:~# ip addr
- 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group
default
- link/loopback
43 matches
Mail list logo