*** This bug is a duplicate of bug 594871 ***
https://bugs.launchpad.net/bugs/594871
** This bug has been marked a duplicate of bug 594871
E: /var/cache/apt/archives/alsa-firmware_1.0.20-0medibuntu4_amd64.deb:
trying to overwrite '/lib/firmware/asihpi/dsp2400.bin', which is also in
*** This bug is a duplicate of bug 594871 ***
https://bugs.launchpad.net/bugs/594871
** This bug has been marked a duplicate of bug 594871
E: /var/cache/apt/archives/alsa-firmware_1.0.20-0medibuntu4_amd64.deb:
trying to overwrite '/lib/firmware/asihpi/dsp2400.bin', which is also in
*** This bug is a duplicate of bug 594871 ***
https://bugs.launchpad.net/bugs/594871
** This bug has been marked a duplicate of bug 594871
E: /var/cache/apt/archives/alsa-firmware_1.0.20-0medibuntu4_amd64.deb:
trying to overwrite '/lib/firmware/asihpi/dsp2400.bin', which is also in
I just ran a sudo apt-get remove --purge alsa-firmware and re-ran the
upgrade.
--
E: /var/cache/apt/archives/alsa-firmware_1.0.20-0medibuntu4_amd64.deb: trying
to overwrite '/lib/firmware/asihpi/dsp2400.bin', which is also in package
linux-firmware 0
https://bugs.launchpad.net/bugs/594871
You
Public bug reported:
My server's (primarily a NAT box/802.11g hotspot) network configuration:
Ubuntu release: 10.04 LTS
External interface: eth3
Internal interface: br0 (bridging eth2 and wlan0)
I run dhcp3-server on my internal interface to supply private
(192.168.*) IP addresses to wired and
Relevant section of /var/log/syslog showing failure of dhcp3 server to
start
** Attachment added: /var/log/syslog section
http://launchpadlibrarian.net/48427309/syslog
--
dhcp3-server launches before upstart brings all interface, thus failing to start
https://bugs.launchpad.net/bugs/580319
Public bug reported:
My server's (primarily a NAT box/802.11g hotspot) network configuration:
Ubuntu release: 10.04 LTS
External interface: eth3
Internal interface: br0 (bridging eth2 and wlan0)
I run dhcp3-server on my internal interface to supply private
(192.168.*) IP addresses to wired and
Relevant section of /var/log/syslog showing failure of dhcp3 server to
start
** Attachment added: /var/log/syslog section
http://launchpadlibrarian.net/48427309/syslog
--
dhcp3-server launches before upstart brings all interface, thus failing to start
https://bugs.launchpad.net/bugs/580319
I haven't seen this problem since upgrading to 2.6.32-20.29. I'm going
to close it, because I think it has been fixed.
** Changed in: linux (Ubuntu)
Status: Incomplete = Fix Released
--
[lucid] ath5k phy1: no further txbuf available, dropping packet wireless drops
connection after large
I noticed that the new kernel in Lucid ( 2.6.32-20.29 ) now has the
above patch.
https://launchpad.net/ubuntu/+source/linux/2.6.32-20.29:
* ath5k: dont use external sleep clock in AP mode
- LP: #553837
* ath5k: fix setup for CAB queue
- LP: #553837
I'll try this for a few days and
*** This bug is a duplicate of bug 528117 ***
https://bugs.launchpad.net/bugs/528117
This is probably related to or a dupe of my bug #561956
--
ubuntuone-login crashed with AttributeError in from_token_and_callback()
https://bugs.launchpad.net/bugs/561954
You received this bug notification
Related question to this report:
https://answers.launchpad.net/ubuntu/+source/ipmasq/+question/88661
--
[needs-packaging] ipmasq
https://bugs.launchpad.net/bugs/475949
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
The associated debbug ( http://bugs.debian.org/cgi-
bin/bugreport.cgi?bug=576213 ) has now been closed after the developers
went to 2.6.32.11:
...
Add stable 2.6.32.11.
- MIPS: Cleanup forgotten label_module_alloc in tlbex.c (Closes: #571305)
- ath5k: fix setup for CAB queue (closes:
Debbug 576213 may be related, though it's particular to the use of
hostapd (which is how this bug is affecting me)
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=576213
** Bug watch added: Debian Bug tracker #576213
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=576213
--
[lucid] ath5k
Is there an alternative to this package? The Debian removal request
indicates there may be packages which provide similar features. The
ipmasq package has been a critical tool for me for years.
--
[needs-packaging] ipmasq
https://bugs.launchpad.net/bugs/475949
You received this bug notification
This kernel patch may be related:
https://patchwork.kernel.org/patch/71995/
--
[lucid] ath5k phy1: no further txbuf available, dropping packet wireless drops
connection after large transfer on virtualbox to the host on bridged ethernet
https://bugs.launchpad.net/bugs/481672
You received this
As mentioned in the GNOME bug report, this crash occurs when Ignore all
manual page breaks is set and no manual page breaks appear in the
document. I've found I can workaround the bug by unchecking Ignore all
manual page breaks on the Gnumeric Print Range tab in the Print
dialog.
--
Printing
*** This bug is a duplicate of bug 439480 ***
https://bugs.launchpad.net/bugs/439480
** This bug has been marked a duplicate of bug 439480
Printing crashes gnumeric with sigsegv
--
Gnumeric crashes immidaitly when trying to print lose all unsaved work also
I'm seeing this too under Karmic's 2.28.1-0ubuntu1. I'm using imap.
What can I provide to help debuging the problem?
** Changed in: evolution (Ubuntu)
Status: Invalid = New
--
Evolution folder inbox doesnt open. Message: column folder_name is not unique
I shut down evolution (with evolution --force-shutdown) and deleted my
folders.db in $HOME/.evolution/mail/imap/account/folders.db and
restarted evolution. That seems to have solve the problem for me.
** Changed in: evolution (Ubuntu)
Status: New = Invalid
--
Evolution folder inbox
Also seeing this on Jaunty i386.
Is there a working .deb anywhere?
--
Buffer overflow in kompozer-bin (crash at startup in jaunty)
https://bugs.launchpad.net/bugs/347779
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Public bug reported:
Binary package hint: gnome-terminal
According to http://mail.gnome.org/archives/desktop-devel-
list/2009-April/msg00053.html sudo gnome-terminal or gksudo gnome-
terminal should work. Alas:
bur...@phoenix:~$ sudo gnome-terminal
Failed to contact the GConf daemon; exiting.
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/24756841/Dependencies.txt
--
Can't run sudo gnome-terminal or gksudo gnome-terminal in jaunty
https://bugs.launchpad.net/bugs/354543
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Changed in: file-roller (Ubuntu)
Status: Incomplete = Confirmed
--
Progress bars in Extract Here dialog does not update (always stays at 50%)
https://bugs.launchpad.net/bugs/289655
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
Confirmed. A friend of mine recently installed 8.10 and wanted to burn
some video files to DVD or VCD. Using Brasero he was able to load the
videos and click the Burn... button on the main windows. A dialog
popped up with some options about NTSC, PAL, and aspect ratio. The
Burn button on that
My friend has a USB drive enclosure that he put an older IDE drive into
and has been trying to use usb-creator to create a bootable Ubuntu
drive. usb-creator does not detect this as a USB drive and so cannot do
this.
We successfully using gparted to repartition the drive as one big VFAT
(fat32)
Not working here either. Migrating mountpoints to /media causes the
share to appear _once it's been mounted_, but not when it's unmounted.
Also, even if it did work, that is an undue burden on administrators and
users.
--
user-mountable (nfs) filesystems are not showing up in Computer view of
It's still displaying documents differently on screen that Acrobat
Reader (ugly red and green boxes around links), which might not
necessarily be a problem except that they still show in presentation
mode, which makes Evince inappropriate for use as a presentation tool.
--
Internal and external
It's definitely still there in intrepid. Still looks just like the
screenshots posted from gutsy. (and the Acrobat Reader 8 still doesn't
display the boxes).
--
Internal and external links diplay and print problem
https://bugs.launchpad.net/bugs/156643
You received this bug notification because
This is new in intrepid. I believe before intrepid, the progress bar
would be set in indeterminate mode. Here is how to reproduce:
1) find a large file, such as the ISO for intrepid
2) rar it into a multi-volume archive:
rar a -v10240k intrepid.rar intrepid.iso
3) right click/Extract Here...
Could this be related to the same problem that crept up in nautilus when
it switched to gvfs in hardy? (bug #195180)
--
disk mounter applet ignores nfs in /etc/fstab
https://bugs.launchpad.net/bugs/282922
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Just updated to intrepid, and now even the gnome-mount workaround fails:
(bug #282922)
--
user-mountable (nfs) filesystems are not showing up in Computer view of nautilus
https://bugs.launchpad.net/bugs/195180
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Public bug reported:
Binary package hint: file-roller
When extracting multi-archive rars containing a single entry, file
roller stays at 50% during the extraction.
File roller appears to be keying off the number of entries in the
archive to populate the progress bar, rather than the number of
Just upgraded to intrepid on my laptop here, and using nvidia-settings
to detect the hotplugged display seems to work.
Specifically:
1) attach monitor via VGA port on laptop
2) launch nvidia-settings (System/Administration/Nvidia X Server Settings)
3) Under X Server Display Configuratoin, select
I just upgraded to intrepid yesterday. The slider bar does now appear
when the brightness buttons are pressed, and the screen brightens and
darkens as expected.
I'm using the NVIDIA accelarated graphics driver (version 177)
according to Hardware Drivers.
--
[gutsy] brightness keys only pop up a
I didn't have msttcorefonts installed when I did the upgrade from hardy
to intrepid yesterday, so I don't know if it occurs there, too.
--
msttcorefonts blocks dist upgrade to gutsy due to dialog
https://bugs.launchpad.net/bugs/141094
You received this bug notification because you are a member
This report may be invalid, but it's certainly not because dapper is out
of support. Dapper is 6.06LTS which means desktop support until June
2009 and server support until June 2011.
--
Error in updating apt in Dapper
https://bugs.launchpad.net/bugs/180094
You received this bug notification
Rather than using aoss, you can try padsp, i.e.,
padsp /usr/games/fceu -sound 1 -fs 0 -opengl 0
/media/deskaheh/fun/games/nes/PUNCH.NES
Also, if bug 254352 is fixed (fceu is updated to 2.0), then this bug
should disappear.
--
fceu sound support broken in hardy
I'm no longer using pre-releases of Ubuntu, so apport is off, and I
haven't had any major crashes in large applications, so I don't know.
I suppose this might as well be marked as a dupe of bug 95822.
--
Attempting to upload a crash report, apport failed with HTTP Error 500:
Internal Server
Public bug reported:
In fixing bug 252331, the new package appears to have been pushed to
hardy-updates. Unfortunately, the updated package should have gone to
hardy-proposed where it was needed. This causes trouble because
virtualbox in hardy-updates is now depending on a kernel that's only in
Did this update somehow make its way into hardy-updates instead of
hardy-proposed? I have disabled hardy-proposed and am finding that
update-manager wants to pull in the 2.6.24-20 modules (which it can't
find of course).
--
VirtualBox. Image failed to boot after update to kernel 2.6.24-20
Public bug reported:
hardy-proposed now has an ABI-bumped kernel (2.6.24-20) which requires a
rebuild of the virtualbox-ose-modules package for users that are testing
-proposed packages.
** Affects: virtualbox-ose-modules (Ubuntu)
Importance: Undecided
Status: New
--
Package
Really? It sorta prevents the virtualbox package from working. Even if
it's not technically a bug in the code, it's a task that needs to be
completed and should be tracked regardless, no?
--
Package needed for 2.6.24-20 (in hardy-proposed)
https://bugs.launchpad.net/bugs/251969
You received this
doing rm -rf .gconf/apps/nautilus removes this problem for me, but when
I go into the nautilus preferences and change the default icon size from
100% to 150%, the problem comes back (nautilus insatiably chews up CPU
and memory). If I try switching the default icon size back, nautilus
remains in
There's a patch on the discussion mailing list which should solve this
more completely (the archives are private, so you'll need to be on the
mailing list to see the patch): http://lists.memaker.org/private.cgi
/discussion-memaker.org/2008-June/000387.html
--
Installation of 0.9.4-0ubuntu1
Well, I tried the patch (with a apt-get source linux-ubuntu-
modules-2.6.24-19-generic, application, dpkg-buildpackage -us -uc, dpkg
-i), and it was no help to me on my T61p. Actually, it seems to make
matters worse: instead of the connection dying every few minutes, it
dies after a second or two.
This may be related to
http://intellinuxwireless.org/bugzilla/show_bug.cgi?id=1576 which has a
small patch attached: http://marc.info/?l=linux-
wirelessm=120242061211544w=2
--
iwl4965: Microcode SW error detected. Restarting 0x200
https://bugs.launchpad.net/bugs/200509
You received this bug
I've been running the hardy backport version for some time, and it
seemed to have been working OK, but after a recent (past week or so)
update, I'm seeing this again very frequently.
--
iwl4965: Microcode SW error detected. Restarting 0x200
https://bugs.launchpad.net/bugs/200509
You
It's possible to use the gnome-mount applet:
Right click on a panel,
select Add to Panel
search for mount
double click the Disk Mounter line.
A set of buttons (one for each user-mountable point) should appear in
the panel.
--
user-mountable (nfs) filesystems are not showing up in Computer
** Bug watch added: Debian Bug tracker #456165
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=456165
** Also affects: debian via
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=456165
Importance: Unknown
Status: Unknown
--
[needs-packaging] Handbrake
Can the systemtap package effectively do what is described in the
http://sourceware.org/systemtap/wiki/SystemtapOnUbuntu page?
$ sudo apt-get install linux-image-debug-generic
$ sudo ln -s /boot/vmlinux-debug-$(uname -r) /lib/modules/$(uname -r)/vmlinux
$ sudo apt-get install
** Bug watch added: GNOME Bug Tracker #535928
http://bugzilla.gnome.org/show_bug.cgi?id=535928
** Also affects: evolution via
http://bugzilla.gnome.org/show_bug.cgi?id=535928
Importance: Unknown
Status: Unknown
--
Google calendar plugin does not properly handle repeating events
Confirmed in gvfsd-dav, too.
Reproducable using gnome-user-share on machine 1, and connecting using
network:// on machine 2.
Transfer any file from Public on machine 1
Fire up top and watch the memory blow up.
You'll also find that when the total size of the files copied exceeds
free memory,
Also, how does one launch a gvfs backend within valgrind to test it?
--
Heavy memory leak in gvfsd-http
https://bugs.launchpad.net/bugs/225615
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
OK, I found a way to do it by following the model here:
https://bugs.launchpad.net/ubuntu/+source/gvfs/+bug/216580/comments/5
** Attachment added: valgrind log after transferring
kubuntu-8.04-desktop-i386.iso
http://launchpadlibrarian.net/14638467/valgrind.log
--
Heavy memory leak in
Public bug reported:
Binary package hint: evolution
Now that the Google calendar plugin works (in 2.22.1.1-0ubuntu2), I've
found a smaller bug.
Here's my problem:
I have my google calendar connected both with an On the Web calendar
and a Google calendar in Evo.
I have repeating events in my
Yeah, I think this is fixed in evo's hardy-proposed packages, though I
don't think the updated packages are in hardy-updates yet.
--
Evolution and Google calendar
https://bugs.launchpad.net/bugs/198111
You received this bug notification because you are a member of Ubuntu
Bugs, which is
This is still not completely fixed (though it is mostly fixed). Most
cases appear to now work but there is at least one that doesn't:
1) select an existing message
2) right click on an email address in the header of the message
3) select Send New Message To...
4) Note that the BCC field is not
bug #92036 is different. It's about when the user clicked a mailto: link
in an external link. What I described is, IIRC, part of the regression
specific to the 2.22 series.
--
account default for always bcc doesn't set the field for new message
https://bugs.launchpad.net/bugs/198167
You received
@isaac
You can view the console output of evolution by running evo from a
Terminal:
Applications/Accessories/Terminal
Then:
evolution --force-shutdown
evolution
(console output will follow)
--
Evolution and Google calendar
https://bugs.launchpad.net/bugs/198111
You received this bug
So I grepped $HOME/.local for x-extension-pdf and found a
$HOME/.local/share/mime/application/x-extension-pdf.xml, which I've
deleted. After doing update-mime-database .local/share/mime/, gvfs-
info reports the right info and the thumbs generate and display
correctly in nautilus.
I don't know
Confirmed here as well. The fglrx kernel driver doesn't want to load
unless manually insmodded:
[EMAIL PROTECTED]:/lib/modules/2.6.24-16-generic/volatile$ ls
ath_hal.ko fcdsl.kofcdslslusb.ko fcdslusba.ko fcpci.ko fglrx.ko
fxusb.ko nvidia_legacy.ko
fcdsl2.ko fcdslsl.ko
Public bug reported:
Binary package hint: evince
With the change to gio, it appears that PDFs are no longer being reported with
mime-type application/pdf. Instead, I see this:
[EMAIL PROTECTED]:~/Desktop$ gvfs-info plai-2007-04-26.pdf |grep content
standard::content-type:
I added a new user, and it works in the new user's account.
[EMAIL PROTECTED]:~$ gconftool --get /desktop/gnome/thumbnailers/[EMAIL
PROTECTED]/enable
true
[EMAIL PROTECTED]:~$ gconftool --get /desktop/gnome/thumbnailers/[EMAIL
PROTECTED]/command
evince-thumbnailer -s %s %u %o
Indeed,
Just double checked and gvfs-info plai-2007-04-26.pdf |grep content
yields applicaiton/pdf under the new test account.
--
Evince no longer thumbnails pdfs in hardy
https://bugs.launchpad.net/bugs/220300
You received this bug notification because you are a member of Ubuntu
Bugs, which is
The (first) error message is expected when LIBXCB_ALLOW_SLOPPY_LOCK=1 is
enabled.
As long as your app isn't crashing, you can safely ignore the error,
since your app doesn't mix xlib and xcb.
The long term solution should be socket handoff, but I don't think
that will hit hardy:
linux-backports-module-hardy has an updated version of the iwl4965
driver (1.2.25) that appears to resolve this for me.
--
iwl4965: Microcode SW error detected. Restarting 0x200
https://bugs.launchpad.net/bugs/200509
You received this bug notification because you are a member of Ubuntu
Well, Ubuntu doesn't develop Evolution, probably it's better to ask on
the gnome bugzilla.
The best option I've found so far is to get the private ical feed from
each google calendar you want to access locally and add it as a calendar
On the Web. That way, the events show up in evolution and in
** Also affects: memaker
Importance: Undecided
Status: New
--
Installation of 0.9.4-0ubuntu1 failed
https://bugs.launchpad.net/bugs/214401
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
After removing python2.4, the install proceeded OK, so I'm guessing the
empty parens on a class is invalid syntax in python 2.4 (but has been
added in 2.5)
--
Installation of 0.9.4-0ubuntu1 failed
https://bugs.launchpad.net/bugs/214401
You received this bug notification because you are a member
It seems like it skips back even after it knows the total number of
files it needs to download (in my case 118).
--
Maximum value of the update/reload progressbar skips when updating
https://bugs.launchpad.net/bugs/18082
You received this bug notification because you are a member of Ubuntu
Bugs,
Public bug reported:
Binary package hint: memaker
Glad to see memaker in the repository! I tried to install it using
synaptic today:
Selecting previously deselected package memaker.
(Reading database ... 300966 files and directories currently installed.)
Unpacking memaker (from
Yes, I do have l-b-m installed.
But why does l-b-m have anything in it before release? I thought it
would be populated by the Ubuntu backports project post-install? Or am I
misunderstanding the difference between linux-ubuntu-modules and linux-
backports-modules?
--
syslog is spammed with
Gotcha, makes sense.
Thanks the info and the fix.
--
syslog is spammed with wme:wme_qdiscop_enqueue ht_queue=4,queue=2 pool=0xF
qdisc=81007c4548c0 on hardy
https://bugs.launchpad.net/bugs/191388
You received this bug notification because you are a member of Ubuntu
Bugs, which is
It's back on 2.6.24-14-generic
My syslog is now close to a gig and filled with
Apr 4 03:09:54 phoenix kernel: [14084.331146] wme:wme_qdiscop_enqueue
ht_queue=4,queue=2 pool=0xF qdisc=dfb85080
Three for each second.
--
syslog is spammed with wme:wme_qdiscop_enqueue ht_queue=4,queue=2
Reopening as confirmed.
** Changed in: linux-ubuntu-modules-2.6.24 (Ubuntu)
Status: Fix Released = Confirmed
--
syslog is spammed with wme:wme_qdiscop_enqueue ht_queue=4,queue=2 pool=0xF
qdisc=81007c4548c0 on hardy
https://bugs.launchpad.net/bugs/191388
You received this bug
Public bug reported:
Binary package hint: totem
After upgrading my G4-based Mac Mini from gutsy to hardy, I'm finding
that videos are not showing up properly. Totem seems to think that the
monitor (a 16:10 24 LCD, attached over a VGA cable, running at
1920x1200) is 4:3. When I play videos on it
OK, my problem was actually bug #210538 sorry for hijacking your bug,
Tomas.
--
[hardy] GDM hangs on a black screen upon startup
https://bugs.launchpad.net/bugs/203825
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Public bug reported:
Binary package hint: f-spot
f-spot in hardy/powerpc is still at 0.4.2-0ubuntu2. It depends on the
(now) missing libgtkhtml2.0-cil, so it's uninstallable.
** Affects: f-spot (Ubuntu)
Importance: Undecided
Status: New
--
f-spot 0.4.2-1ubuntu1 didn't make it
This _might_ have to do with sound, now that I think about it.
--
[hardy] GDM hangs on a black screen upon startup
https://bugs.launchpad.net/bugs/203825
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
I think I saw this, too.
In my case, I could see the beige background and the circular timer
mouse cursor spinning indefinitely. I went to a text console and ran
top. I saw that gdmgreeter was monopolizing the CPU. I editied gdm.conf
and switched to gdmlogin, restarted gdm and all was well
Why would iwlwifi go to LBM and not LUM? I thought LBM was for backports
which would only appear post-release?
--
iwl4965: Microcode SW error detected. Restarting 0x200
https://bugs.launchpad.net/bugs/200509
You received this bug notification because you are a member of Ubuntu
Bugs, which
*** This bug is a duplicate of bug 201055 ***
https://bugs.launchpad.net/bugs/201055
Um it's already done!
I've been using pidgin 2.4.0 in hardy since early this morning.
--
please update pidgin to 2.4.x
https://bugs.launchpad.net/bugs/198064
You received this bug notification because
*** This bug is a duplicate of bug 182712 ***
https://bugs.launchpad.net/bugs/182712
Public bug reported:
Binary package hint: tracker
Trackerd just crashes randomly all the time. Not sure why, but it
happens.
ProblemType: Crash
Architecture: i386
CrashCounter: 1
Date: Thu Mar 27 14:21:00
*** This bug is a duplicate of bug 182712 ***
https://bugs.launchpad.net/bugs/182712
** Attachment added: CoreDump.gz
http://launchpadlibrarian.net/12924748/CoreDump.gz
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/12924749/Dependencies.txt
** Attachment added:
Ilike I said, you just need to take flowid :1 off of the last line in
/usr/sbin/wondershaper and wondershaper will run.
--
[hardy] running wondershaper gives 'What is flowid? Illegal police'
https://bugs.launchpad.net/bugs/194623
You received this bug notification because you are a member of
I've still having trouble with gcc-4.2 and mudflap under hardy
--
[PR18885] linker does not link libmudflap automatically with -fmudflap
https://bugs.launchpad.net/bugs/92638
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
gnome-games already recommends python-gtkglext1 and python-opengl
It doesn't need those packages to run -- they just enhance the
functionality -- so it doesn't actually depend on them. This sounds
like correct packaging to me.
--
glChess has no 3D
https://bugs.launchpad.net/bugs/71593
You
A Gentoo bug on another package suggests that flowid should be removed
from the lines that are using it:
http://bugs.gentoo.org/show_bug.cgi?id=213624
--
[hardy] running wondershaper gives 'What is flowid? Illegal police'
https://bugs.launchpad.net/bugs/194623
You received this bug notification
Same with a Debian bug: http://bugs.debian.org/cgi-
bin/bugreport.cgi?bug=458539
** Also affects: iproute (Ubuntu)
Importance: Undecided
Status: New
--
[hardy] running wondershaper gives 'What is flowid? Illegal police'
https://bugs.launchpad.net/bugs/194623
You received this bug
So I guess the change in iproute (or the kernel?) has caused the
wondershaper program to fail.
--
[hardy] running wondershaper gives 'What is flowid? Illegal police'
https://bugs.launchpad.net/bugs/194623
You received this bug notification because you are a member of Ubuntu
Bugs, which is
BTW: it's this line (at the end of /usr/sbin/wondershaper) that's causing the
trouble:
tc filter add dev $DEV parent : protocol ip prio 50 u32 match ip src \
0.0.0.0/0 police rate ${DOWNLINK}kbit burst 10k drop flowid :1
And, indeed, removing flowid :1 from that line causes wondershaper
I think you would need to use the 64bit version of Ubuntu (or the 32big
-server kernel, which won't have all the desktop restricted drivers) to
access more than 3G of RAM for userspace.
--
4G RAM on Thinkpad T61p
https://bugs.launchpad.net/bugs/177548
You received this bug notification because
A and B have at times worked on my oldish Thinkpad T30. It's got a
radeon 7500 with 16MB of RAM. At [EMAIL PROTECTED], GLX is disabled by
default because there's not enough RAM for the hardware to support 3D at
that resolution and bit depth.
--
radeon driver can not do xv with AIGLX enabled
BTW, (B) no longer seems to be working as of a week or two ago. I
haven't been able to fully investigate because my wife has the laptop
and is out of town, but I was able to get her video back by doing (A).
--
radeon driver can not do xv with AIGLX enabled
https://bugs.launchpad.net/bugs/150519
*** This bug is a duplicate of bug 199319 ***
https://bugs.launchpad.net/bugs/199319
Public bug reported:
Binary package hint: rhythmbox
[EMAIL PROTECTED]:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=8.04
DISTRIB_CODENAME=hardy
DISTRIB_DESCRIPTION=Ubuntu hardy (development
*** This bug is a duplicate of bug 199319 ***
https://bugs.launchpad.net/bugs/199319
** Attachment added: CoreDump.gz
http://launchpadlibrarian.net/12755768/CoreDump.gz
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/12755769/Dependencies.txt
** Attachment added:
Just got it again in bug 204103 (reported and marked as a dupe).
--
rhythmbox crashed with SIGSEGV in g_type_create_instance()
https://bugs.launchpad.net/bugs/199319
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
My router is a (hardy) Ubuntu box which has an atheros-based card in
Master mode running hostapd. I've configured hostapd with a WPA-PSK (not
WPA-RADIUS or EAP), and I'm using TKIP and CCMP ciphers.
--
iwl4965: Microcode SW error detected. Restarting 0x200
Ah... I looked at the last few comments, and I was under the impression
that it was fixed in 1.2.1 (hardy has 1.2.0), but now that I take a
second look, I see that it was meant to have been fixed in 1.1.2.
I guess it's a pretty general error message.
--
iwl4965: Microcode SW error detected.
1 - 100 of 876 matches
Mail list logo
