[Bug 1828107] Re: gvfs can't list shares from smb servers that disabled SMB1

[C. Jeffery Small]

Xubuntu 22.04.1 after upgrading from 20.04

In order to get multiple Windows 10 systems to "discover" the samba
shares on two different Xubuntu systems, I had to re-enable SMB1
protocol on all the Windows systems.  Microsoft apparently keeps
disabling this on system updates.

As reported above, old Windows mapped drive assignments made to Ubuntu
samba shares have continued to work over time, but new shares cannot be
seen unless SMB1 is enabled.  of course, this should all just work using
newer secure protocols.

For a significant piece of server software, the fact that this hasn't
been addressed long ago is a real mystery.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to a duplicate bug report (1881780).
https://bugs.launchpad.net/bugs/1828107

Title:
  gvfs can't list shares from smb servers that disabled SMB1

To manage notifications about this bug go to:
https://bugs.launchpad.net/gvfs/+bug/1828107/+subscriptions


-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1974254] Re: Probles with Clutter

[C. Jeffery Small]

Tim, I followed your advice and yes, that fixed most of the problems I
was having.  Apparently there was a system update that required a
reboot, but there was an error and it just said all updates applied.
This has occurred on the past couple of updates that didn't have too
many changes, but something clearly got screwed up.  I should have done
this reboot myself, but I've become too comfortable believing the
package manager.  I won't make that mistake again.  So that appears to
resolve the issue.  Thanks to you and Erich for your feedback.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1974254

Title:
  Probles with Clutter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/clutter-gtk/+bug/1974254/+subscriptions


-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1974254] Re: Probles with Clutter

[C. Jeffery Small]

I will follow up elsewhere, but I would really like to understand the
disposition of clutter, given the site I reported that says it is now
gone.  What is actually happening here?

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1974254

Title:
  Probles with Clutter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/clutter-gtk/+bug/1974254/+subscriptions


-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1974254] Re: Probles with Clutter

[C. Jeffery Small]

???

Can you be more specific.  I am fully patched on 20.04.4 and I still get
the same error reports from geeqie and cheese.  Both worked until very
recently and neither package was updated in quite some time.

The developer of geeqie reported that he saw the same problem.  Then he
didn't!  I am also finding a lot of other stable applications have
stopped working such as openshot and kdenlive video editors, although
these are Qt apps.  Possibly there is a deeper underlying problem.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1974254

Title:
  Probles with Clutter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/clutter-gtk/+bug/1974254/+subscriptions


-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1975384] Re: openshot has started crashing

[C. Jeffery Small]

I just tried to start kdenlive with similar bad results.  There are so
many programs failing that there must be some underlying common problem.

141-> kdenlive
Icon theme "crystalsvg" not found.
Icon theme "crystalsvg" not found.
WARNING : Fails to parse  "deinterlace"
"videostab" is blacklisted
"videostab2" is blacklisted
"resample" is blacklisted
"qtext" is blacklisted
WARNING : Fails to parse  "audiochannels"
WARNING : Fails to parse  "audioconvert"
WARNING : Fails to parse  "data_feed"
"data_show" is blacklisted
WARNING : Fails to parse  "imageconvert"
"mask_apply" is blacklisted
"mask_start" is blacklisted
"mono" is blacklisted
"region" is blacklisted
"resize" is blacklisted
"transition" is blacklisted
"watermark" is blacklisted
WARNING : Fails to parse  "jack"
"jackrack" is blacklisted
WARNING : Fails to parse  "avcolour_space"
WARNING : Fails to parse  "avcolor_space"
WARNING : Fails to parse  "avdeinterlace"
WARNING : Fails to parse  "swscale"
"avfilter.abench" is blacklisted
"avfilter.acompressor" is blacklisted
"avfilter.adelay" is blacklisted
"avfilter.aecho" is blacklisted
"avfilter.aemphasis" is blacklisted
"avfilter.aeval" is blacklisted
"avfilter.afade" is blacklisted
"avfilter.afftfilt" is blacklisted
"avfilter.agate" is blacklisted
"avfilter.ametadata" is blacklisted
"avfilter.arealtime" is blacklisted
"avfilter.ashowinfo" is blacklisted
"avfilter.channelmap" is blacklisted
"avfilter.chorus" is blacklisted
"avfilter.earwax" is blacklisted
"avfilter.volume" is blacklisted
"avfilter.volumedetect" is blacklisted
"avfilter.ass" is blacklisted
"avfilter.atadenoise" is blacklisted
"avfilter.avgblur" is blacklisted
"avfilter.bbox" is blacklisted
"avfilter.bench" is blacklisted
"avfilter.blackdetect" is blacklisted
"avfilter.blackframe" is blacklisted
"avfilter.boxblur" is blacklisted
"avfilter.bwdif" is blacklisted
"avfilter.chromakey" is blacklisted
"avfilter.colorkey" is blacklisted
"avfilter.colormatrix" is blacklisted
"avfilter.colorspace" is blacklisted
"avfilter.convolution" is blacklisted
"avfilter.crop" is blacklisted
"avfilter.cropdetect" is blacklisted
"avfilter.curves" is blacklisted
"avfilter.datascope" is blacklisted
"avfilter.dctdnoiz" is blacklisted
"avfilter.deband" is blacklisted
"avfilter.deflate" is blacklisted
"avfilter.deinterlace_vaapi" is blacklisted
"avfilter.deshake" is blacklisted
"avfilter.despill" is blacklisted
"avfilter.doubleweave" is blacklisted
"avfilter.drawbox" is blacklisted
"avfilter.drawgraph" is blacklisted
"avfilter.drawgrid" is blacklisted
"avfilter.drawtext" is blacklisted
"avfilter.elbg" is blacklisted
"avfilter.eq" is blacklisted
"avfilter.fade" is blacklisted
"avfilter.field" is blacklisted
"avfilter.fieldhint" is blacklisted
"avfilter.fieldorder" is blacklisted
"avfilter.find_rect" is blacklisted
"avfilter.floodfill" is blacklisted
"avfilter.fspp" is blacklisted
"avfilter.gblur" is blacklisted
"avfilter.geq" is blacklisted
"avfilter.hflip" is blacklisted
"avfilter.hqdn3d" is blacklisted
"avfilter.hqx" is blacklisted
"avfilter.hue" is blacklisted
"avfilter.hwdownload" is blacklisted
"avfilter.idet" is blacklisted
"avfilter.il" is blacklisted
"avfilter.lenscorrection" is blacklisted
"avfilter.loop" is blacklisted
"avfilter.lumakey" is blacklisted
"avfilter.lut" is blacklisted
"avfilter.lutrgb" is blacklisted
"avfilter.lutyuv" is blacklisted
"avfilter.mcdeint" is blacklisted
"avfilter.metadata" is blacklisted
"avfilter.negate" is blacklisted
"avfilter.nlmeans" is blacklisted
"avfilter.nnedi" is blacklisted
"avfilter.owdenoise" is blacklisted
"avfilter.pad" is blacklisted
"avfilter.perspective" is blacklisted
"avfilter.phase" is blacklisted
"avfilter.pixscope" is blacklisted
"avfilter.pp" is blacklisted
"avfilter.pp7" is blacklisted
"avfilter.prewitt" is blacklisted
"avfilter.realtime" is blacklisted
"avfilter.removegrain" is blacklisted
"avfilter.removelogo" is blacklisted
"avfilter.roberts" is blacklisted
"avfilter.rotate" is blacklisted
"avfilter.scale_vaapi" is blacklisted
"avfilter.showinfo" is blacklisted
"avfilter.shuffleframes" is blacklisted
"avfilter.sidedata" is blacklisted
"avfilter.signalstats" is blacklisted
"avfilter.sobel" is blacklisted
"avfilter.stereo3d" is blacklisted
"avfilter.super2xsai" is blacklisted
"avfilter.swapuv" is blacklisted
"avfilter.tblend" is blacklisted
"avfilter.tlut2" is blacklisted
"avfilter.tonemap" is blacklisted
"avfilter.transpose" is blacklisted
"avfilter.vectorscope" is blacklisted
"avfilter.vflip" is blacklisted
"avfilter.vignette" is blacklisted
"avfilter.vmafmotion" is blacklisted
"avfilter.w3fdif" is blacklisted
"avfilter.xbr" is blacklisted
"avfilter.yadif" is blacklisted
"avfilter.zmq" is blacklisted
"avfilter.zoompan" is blacklisted
WARNING : Fails to parse  "swresample"
"gtkrescale" is blacklisted
WARNING : Fails to parse  "glsl.manager"
WARNING : Fails to parse  "movit.convert"
WARNING : Fails to parse  "movit.crop"
WARNING : Fails to parse  "movit.resample"
WARNING : Fails to parse  "movit.resize"

[Bug 1975384] [NEW] openshot has started crashing

[C. Jeffery Small]

Public bug reported:

Xubuntu 20.04.4

As of about a week ago, many programs have stopped working.  I believe
there was a buggy update that is responsible, although I cannot pinpoint
it specifically.

Clutter-gtk seems to have been changed (eliminated ??) which has
affected many programs.  See my report here:

https://bugs.launchpad.net/ubuntu/+bug/1974254

Today I tried to start Openshot, which I have used withing the past two
weeks, and I get the following results.  This is a qt app, so it must be
related to something else.

139-> openshot
Copying icon thumbnails to cache
ICONFILE = /u/jeff/.cache/thumbnails/normal/e67402f44e90fe458664fda40767654d.png
Loaded modules from: /tmp/.mount_tySedB/usr/bin
INFO app: 
INFO app: Sat May 21 10:57:17 2022
INFO app:   Starting new session  
INFO app: 
INFO app: OpenShot (version 2.6.1)
INFO app: 
INFO app: openshot-qt version: 2.6.1
INFO app: libopenshot version: 0.2.7
INFO app: platform: Linux-5.4.0-110-generic-x86_64-with-Ubuntu-20.04-focal
INFO app: processor: x86_64
INFO app: machine: x86_64
INFO app: python version: 3.6.9
INFO app: qt5 version: 5.9.5
INFO app: pyqt5 version: 5.10.1
INFO app: Frozen version info from build server:
{
"build_name": "OpenShot-v2.6.1-release-candidate-8238-59878784-d588dbd6",
"date": "2021-09-04 23:49",
"libopenshot": {
"CI_COMMIT_REF_NAME": "release-20210904",
"CI_COMMIT_SHA": "59878784732fa399c47ac5d282bfc9dfe470d0dc",
"CI_JOB_ID": "27417",
"CI_PIPELINE_ID": "8237",
"CI_PROJECT_NAME": "libopenshot",
"SO": "21",
"VERSION": "0.2.7"
},
"libopenshot-audio": {
"CI_COMMIT_REF_NAME": "release-20210904",
"CI_COMMIT_SHA": "d588dbd6057f71c987dc6d8448322aa6b6e86f1a",
"CI_JOB_ID": "27412",
"CI_PIPELINE_ID": "8236",
"CI_PROJECT_NAME": "libopenshot-audio",
"SO": "8",
"VERSION": "0.2.2"
},
"openshot-qt": {
"CI_COMMIT_REF_NAME": "release-20210904",
"CI_COMMIT_SHA": "11f8e5050bd95c7731beccda28a01fbb481fcf7d",
"CI_JOB_ID": "27422",
"CI_PIPELINE_ID": "8238",
"CI_PROJECT_NAME": "openshot-qt",
"SO": null,
"VERSION": "2.6.1"
}
}
INFO project_data: Setting default profile to HDV 720 24p
INFO language: Qt Detected Languages: ['en-US']
INFO language: LANG Environment Variable: C.UTF-8
INFO language: LOCALE Environment Variable: 
INFO language: OpenShot Preference Language: Default
INFO logger_libopenshot: Connecting to libopenshot with debug port: 5556
INFO app: Setting font to /tmp/.mount_tySedB/usr/bin/images/fonts/Ubuntu-R.ttf
INFO app: Setting custom dark theme
INFO ui_util: Initializing UI for MainWindow
WebEngineContext used before QtWebEngine::initialize() or OpenGL context 
creation failed.
Installed Qt WebEngine locales directory not found at location 
/tmp/.mount_tySedB/usr/bin/translations/qtwebengine_locales. Trying application 
directory...
Qt WebEngine locales directory not found at location 
/tmp/.mount_tySedB/usr/bin/qtwebengine_locales. Trying fallback directory... 
Translations MAY NOT not be correct.
[0521/105720.864468:WARNING:resource_bundle_qt.cpp(115)] 
locale_file_path.empty() for locale 
Installed Qt WebEngine locales directory not found at location 
/tmp/.mount_tySedB/usr/bin/translations/qtwebengine_locales. Trying application 
directory...
Qt WebEngine locales directory not found at location 
/tmp/.mount_tySedB/usr/bin/qtwebengine_locales. Trying fallback directory... 
Translations MAY NOT not be correct.
Path override failed for key ui::DIR_LOCALES and path 
'/u/jeff/.QtWebEngineProcess'
[0521/105722.207297:WARNING:resource_bundle_qt.cpp(115)] 
locale_file_path.empty() for locale 
[3068154:3068338:0521/105723.119801:ERROR:nss_util.cc(808)] After loading Root 
Certs, loaded==false: NSS error code: -8018
INFO thumbnail: Starting thumbnail server listening on port 35129
INFO webengine: WebEngine backend initializing
INFO transition_model: updating transitions model.
INFO version: Found current version: {'openshot_version': '2.6.1', 
'trans_rate_unstable': 0.001, 'error_rate_unstable': 0.05, 'trans_rate_stable': 
0.01, 'error_rate_stable': 0.16}
INFO effects_model: updating effects model.
INFO emoji_model: updating emoji model.
INFO sentry: Sentry initialized with 0.16 error reporting rate (production)
INFO main_window: InitCacheSettings
INFO main_window: cache-mode: CacheMemory
INFO main_window: cache-limit-mb: 250
INFO main_window: Creating CacheMemory object with 262144000 byte limit
INFO preview_thread: QThread Start Method Invoked
ERROR main_window: Unhandled crash detected: 
linux-/lib/x86_64-linux-gnu/libc.so.6 abort 0x12b [0x7fbcf8267859]
Failed to create OpenGL context for format QSurfaceFormat(version 2.0, 

[Bug 1974254] Re: Probles with Clutter

[C. Jeffery Small]

I wasn't sure of the package so I left field blank.  I went back and
added clutter-gtk.  Hope that helps.

** Also affects: clutter-gtk (Ubuntu)
   Importance: Undecided
   Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1974254

Title:
  Probles with Clutter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1974254/+subscriptions


-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1974254] [NEW] Probles with Clutter

[C. Jeffery Small]

Public bug reported:

Running Xubuntu 20.04.4

I've started seeing all sorts of programs failing in the last week
apparently due to clutter.  This includes Geeqie and Cheese, and
possibly Zoom, although I haven't tracked down the problem there.  For
example, when I try to start geeqie, I get:

Can't initialize clutter-gtk.
Start geeqie with the option: --disable-clutter

When I try to run cheese I get:

(cheese:1207183): Clutter-CRITICAL **: 17:54:24.432: Unable to
initialize Clutter: Unable to initialize the Clutter backend: no
available drivers found.

** (cheese:1207183): ERROR **: 17:54:24.432: cheese-application.vala:89: Unable 
to initialize libcheese-gtk
Trace/BPT trap(coredump)

In researching the problem I ran across this article:

https://blogs.gnome.org/clutter/

Now, I have no idea what clutter is/does, but it seems to now be
retired.  Was the package removal back-ported to earlier releases of
Ubuntu?  The gir1.2-gtkclutter-1.0, gir1-clutter-1.0 and
gstreamer1.0-clutter-3.0 packages are still installed.

Any guidelines here?  Thanks.

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1974254

Title:
  Probles with Clutter

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1974254/+subscriptions


-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1776800] Re: Unable to start snap applications if user's home directory is not /home/$USER

[C. Jeffery Small]

Just to make sure the note is here, my home directory is not in /home at
all, but located under /u which is a mount point for an external volume
on another disk.  I experienced the same problem trying to run a snap.
Whatever the solution, it should be generalized to any $HOME location.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1776800

Title:
  Unable to start snap applications if user's home directory is not
  /home/$USER

To manage notifications about this bug go to:
https://bugs.launchpad.net/snapd/+bug/1776800/+subscriptions


-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1918375] Re: Obscure Window Manager Problem [Enhancement]

[C. Jeffery Small]

Not getting much attention here!  :-)

Here is some additional information that might be useful.  I was having
problems with new windows being created and hidden underneath existing
windows.  In a forum discussion it was suggested to turn off (uncheck)
the "Activate focus stealing prevention" on the "Window Manager
Tweaks->Focus" tab.  This indeed was the problem and once unchecked, new
windows were consistently created on the top of the stack.  However,
this does not address the problem of moving a window that is lower or at
the bottom of the window stack to another workspace using keyboard
shortcuts.  The moving window may still disappear beneath other windows
higher in the stack.

I have "Raise window when clicking inside application window" set so any
attempt to drag a window with the mouse forces it to the top of the
stack.  My suggestion is that if the user has this option set, that it
then also imply that any window movement initiated by a keyboard
shortcut also causes the window to be raised so that it will float above
all other windows as the virtual desktops (workspaces) change.
Unchecking this option would leave the keyboard shortcut action as is.

Of course, it would be clearer for everyone involved if this raise-on-
window-movement option was given it's own option in the Window Manager
or the Window Manager Tweaks menu.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1918375

Title:
  Obscure Window Manager Problem [Enhancement]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfwm4/+bug/1918375/+subscriptions


-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1859526] Re: xfwm4 crashing after Xubuntu 19.10 upgrade

[C. Jeffery Small]

Yes, after 18.04, it was no longer possible to run two independent
desktop sessions, even if you have a single GPU supporting multiple
screens.  It boggles my mind why this incredibly useful capability was
allowed to just die. You can still gang the two screens together with
the panel running on one screen and the window manager running across
both, but you cannot control them independently; i.e., if you switch
desktops both screens change rather than just the one you would like.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1859526

Title:
  xfwm4 crashing after Xubuntu 19.10 upgrade

To manage notifications about this bug go to:
https://bugs.launchpad.net/xfwm4/+bug/1859526/+subscriptions


-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1828107] Re: gvfs can't list shares from smb servers that disabled SMB1

[C. Jeffery Small]

Regarding my previous comment, disregard the issue about Windows 10
having problems accessing the Samba shares.  This turned out to be a
strange password problem with samba.  Resetting the user's password to
the same value that it already was immediately cleared the issue and all
windows machines could once again see the shares.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1828107

Title:
  gvfs can't list shares from smb servers that disabled SMB1

To manage notifications about this bug go to:
https://bugs.launchpad.net/gvfs/+bug/1828107/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1828107] Re: gvfs can't list shares from smb servers that disabled SMB1

[C. Jeffery Small]

Just to add another voice to the crowd, I'm on Xubuntu 20.04 and I just
ran across this problem myself.

I am using the Nemo file browser, but the same thing occurs with
Nautilus and Thunar.  I didn't notice the problem for a long while
because I had three legacy Windows machines on the network (all running
Windows 10 at this point) and had made file browser bookmarks to the
important shares long ago.  These bookmarks have continued to work to
this day without issue.  I got a new Windows 10 machine a few weeks ago
and was having the problem everyone reports of not being able to connect
("Failed to retrieve share list from server") on the new machine, even
though all the existing bookmarks were still functioning file.  All of
the Windows 10 machines were able to see one another without problem.

Then I ran across this thread and tried Bloodyiron's suggestion of
killing the gvfsd-smb-browse process.  Immediately I was able to connect
to the new machine using Nemo.  I quickly created some needed bookmarks
to the important shares and now I can communicate using the file browser
and expect the new bookmarks to be as reliable as the others.  So I
would suggest this bookmark method to others as a workaround.

This supports Craig W's comment about the difference between discovery
and browsing.  When I run "smbclient -L // -U ", it
reports all of the shares on the target, whether Windows or Linux, with
the closing message: "SMB1 disabled -- no workgroup available" as
expected.

Unfortunately, this is only a one-way solution.  All of the legacy
Windows 10 machines can see and access the Samba shares on the Xubuntu
box, but I haven't yet figured out a way to get the new Windows machine
to access these same shares, with or without gvfsd-smb-browse running.
Every connection attempt is rejected and I haven't found useful messages
in the logs.  If I figure out a solution, I'll post here, and I'm open
to suggestions.

I agree with the general sentiment that for a service as important as
this, there isn't any real excuse for this thing dragging out for two
years as it has.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1828107

Title:
  gvfs can't list shares from smb servers that disabled SMB1

To manage notifications about this bug go to:
https://bugs.launchpad.net/gvfs/+bug/1828107/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1918375] [NEW] Obscure Window Manager Problem [Enhancement]

[C. Jeffery Small]

Public bug reported:

Xubuntu 20.04
xfwm4 4.14.1-0ubuntu1 

This is a problem that only occurs under very specific conditions.
However, I think it is problematic enough to deserve consideration for
an enhancement.

My setup includes multiple (8) virtual desktops.  I use
Meta-{L,R}ArrowKey to move between desktops and Shift-Meta-{L,R}ArrowKey
to move a specific window across and to different desktops.

My Window Manager settings include:
  - Focus Follows Mouse
  - Automatically give focus to newly created windows
  - Raise window when clicking inside application window

I do not use Auto raise when window receives focus.

The Problem:  I move my mouse over a window on the current screen.  It
receives focus, but I do not click on it.  I want to move the window
three desktops to the left.  I use Shift-Meta-LeftArrow to begin moving
the window.  I press it three times and discover that I have a mess!
All sorts of things are on the wrong screens.  I finally figured out
that the original window is not "raised" because I didn't click on it.
Therefore, as it moved to the first desktop to the left, it got placed
beneath another window there and was completely hidden.  The "higher"
window then gets picked up and is moved a screen to the left.  It's
possible that the same thing happens (some of my windows are maximized
and fill the entire screen) and the second window gets dropped and the
third window now goes for a ride.  If you are not paying very close
attention, this is all extremely confusing.

As I said, this happens because of my particular settings.  I don't like
auto raise on focus because it causes a lot of visual jumping on the
screen when you move the mouse around.  I did try it out with a long
delay, but the problem described above can still occur.

I would suggest a reasonably simple fix which is whenever a window is
being moved, immediately raise it so that it floats above the other
windows and never gets lost under another window.  I assume that raising
a window makes it "higher" then all windows on every desktop, not just
the current one.  Thoughts?

** Affects: xfwm4 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: focus raise xfwm4

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1918375

Title:
  Obscure Window Manager Problem [Enhancement]

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfwm4/+bug/1918375/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1918017] Re: ksh93 problems

[C. Jeffery Small]

I did manually install ksh93u and all is back to normal on my machine.
However, the 2020 package still gets reported in synaptic, hiding all
mention of ksh93.  Even under the "Installed (manual)" section, ksh is
listed, but still reported as version 2020.  There is no recognition of
93u being in the local package DB, even though it is there!  So I agree
that what Brian is suggesting would be a good thing to get these
repositories to 1) distinguish between 93u and 2020, and 2) get 93u
listed as the default package, to avoid a lot of confusion.  Since it
was already replaced shortly after the 20.04 release, this seems like a
well tested option that can be adopted without causing regression
problems.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1918017

Title:
  ksh93 problems

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ksh/+bug/1918017/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1895246] Re: Plugin calls the incorrect API

[C. Jeffery Small]

Maintainer: please update the 20.04 focal repository with a working
package.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1895246

Title:
  Plugin calls the incorrect API

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfce4-weather-plugin/+bug/1895246/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1918017] Re: ksh93 problems

[C. Jeffery Small]

** Package changed: ubuntu => ksh (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1918017

Title:
  ksh93 problems

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ksh/+bug/1918017/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1918017] [NEW] ksh93 problems

[C. Jeffery Small]

Public bug reported:

Running Xubuntu 20.04.02

I've been running ksh93 for 40 years now.  Somewhere in the recent past,
ksh started performing in strange ways.  In particular, it stopped
adding commands with faulty syntax to the command history list,
rendering them unavailable for recall and editing.  Upon further
investigation, I discovered that ksh93 had been silently replaced by
ksh2020, which is apparently (according to other reports)a buggy and
unsupported version of ksh that AT recently washed their hands of.  If
you look at synaptic, the ksh93 version is not even listed -- only
ksh2020.

See this image:  http://smallthoughts.com/photos/misc/ksh_01.jpg

ksh93 is still available in the focal repository and I was able to
reinstall it with:

apt install ksh93

but it remains unlisted in synaptic.

First, ksh2020 is buggy and should not be used -- and certainly not as
the primary ksh installation.

Second, the distro repository needs to be updated to list the ksh93
package available and made the default.

This silent replacement of ksh has caused me many hours of problems!

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1918017

Title:
  ksh93 problems

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1918017/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1899991] [NEW] indicator-appmenu causing some application menubars to not display

[C. Jeffery Small]

Public bug reported:

Xubuntu 20.04  (Ubuntu 20.04.1 LTS)
indicator-appmenu 15.02.0+16.10 20160927-0ubuntu5 From std package repository

After upgrading to Xubuntu 20-04, I found that the menubar (File, Edit,
etc.) was not displaying in LibreOffice and Clementine.  Most apps,
including xfce4-terminal, GIMP, Firefox, etc., were not affected.  With
some hints from the web, I uninstalled the indicator-appmenu package,
rebooted, and the missing menubars were restored.  There seems to be a
new problem triggered by 20.04.

I see no ill effects so far running Xfce4.  Does this package have any
function in this environment, or is it specific only to Gnome?

** Affects: indicator-appmenu (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/181

Title:
  indicator-appmenu causing some application menubars to not display

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/indicator-appmenu/+bug/181/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1898891] [NEW] anacron cron.weekly error: AttributeError: module 'platform' has no attribute 'linux_distribution'

[C. Jeffery Small]

Public bug reported:

Ever since upgrading to Xubuntu 20.04, anacron throws the following error 
weekly.  This seems to be a common problem reported on the web regarding python 
3.8.  Apparently some file or library is outdated, but I have not seen this 
error reported in relation to anacron.
--

Subject: Anacron job 'cron.weekly' on .com

/etc/cron.weekly/apt-xapian-index:
ERROR:root:DebFileApplication import
Traceback (most recent call last):
  File "/usr/share/software-center/softwarecenter/db/__init__.py", line 6, in

from .debfile import DebFileApplication, DebFileOpenError
  File "/usr/share/software-center/softwarecenter/db/debfile.py", line 25, in

from softwarecenter.db.application import Application, AppDetails
  File "/usr/share/software-center/softwarecenter/db/application.py", line 28,
in 
import softwarecenter.distro
  File "/usr/share/software-center/softwarecenter/distro/__init__.py", line 201,
in 
distro_instance = _get_distro()
  File "/usr/share/software-center/softwarecenter/distro/__init__.py", line 168,
in _get_distro
distro_info = platform.linux_distribution()
AttributeError: module 'platform' has no attribute 'linux_distribution'
Traceback (most recent call last):
  File "/usr/sbin/update-apt-xapian-index", line 104, in 
if not indexer.setupIndexing(force=opts.force, system=opts.pkgfile is None):
  File "/usr/lib/python3/dist-packages/axi/indexer.py", line 473, in
setupIndexing
self.plugins = Plugins(progress=self.progress, system=system)
  File "/usr/lib/python3/dist-packages/axi/indexer.py", line 98, in __init__
addon = Addon(fullname, **kw)
  File "/usr/lib/python3/dist-packages/axi/indexer.py", line 53, in __init__
self.module = imp.load_source("axi.plugin_" + self.name, fname)
  File "/usr/lib/python3.8/imp.py", line 171, in load_source
module = _load(spec)
  File "", line 702, in _load
  File "", line 671, in _load_unlocked
  File "", line 783, in exec_module
  File "", line 219, in _call_with_frames_removed
  File "/usr/share/apt-xapian-index/plugins/software_center.py", line 13, in

from softwarecenter.db.update import (
  File "/usr/share/software-center/softwarecenter/db/update.py", line 33, in

from softwarecenter.backend.scagent import SoftwareCenterAgent
  File "/usr/share/software-center/softwarecenter/backend/scagent.py", line 30,
in 
from softwarecenter.distro import get_distro, get_current_arch
  File "/usr/share/software-center/softwarecenter/distro/__init__.py", line 201,
in 
distro_instance = _get_distro()
  File "/usr/share/software-center/softwarecenter/distro/__init__.py", line 168,
in _get_distro
distro_info = platform.linux_distribution()
AttributeError: module 'platform' has no attribute 'linux_distribution'
run-parts: /etc/cron.weekly/apt-xapian-index exited with return code 1

** Affects: anacron (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1898891

Title:
  anacron cron.weekly error: AttributeError: module 'platform' has no
  attribute 'linux_distribution'

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/anacron/+bug/1898891/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1861453] [NEW] The chromium-browser snap package fails to run

[C. Jeffery Small]

Public bug reported:

Xubuntu 19.10
chromium-browser 79.0.3945.79-0ubuntu0.19.10.2
Transitional package - chromium-browser -> chromium snap 

Chromium worked fine before the upgrade to 19.10.  There has been a
transition to snap packaging.

My first attempt to launch the browser results in:

% chromium-browser
2020/01/30 11:12:47.911841 cmd_run.go:529: WARNING: XAUTHORITY environment 
value is not a clean path: "/x/u/jeff/.Xauthority"
cannot perform operation: mount --rbind /home /tmp/snap.rootfs_MDsNgD//home: 
Permission denied

% dmesg | grep DENIED  (just showing one typical message)
[827635.380132] audit: type=1400 audit(1580411567.940:87): apparmor="DENIED" 
operation="mount" info="failed flags match" error=-13 
profile="/snap/core/8268/usr/lib/snapd/snap-confine" 
name="/tmp/snap.rootfs_MDsNgD/home/" pid=2968 comm="snap-confine" 
srcname="/x/u/" flags="rw, rbind"

The home directory is: /u/jeff

The home directory is actually resides on an external drive mounted on
/x with /u being a symlink to /x/u

% cd /
% ls -l home u
lrwxrwxrwx 1 root root 1 Jan  2  2015 home -> u
lrwxrwxrwx 1 root root 3 Nov 30  2017 u -> x/u

%echo $XAUTHORITY
/u/jeff/.Xauthority

Applications should not care about these sorts of mounts and linkages,
but they now appear to be very sensitive to them.  What needs to be done
to make this work?


BTW, I think this move to SNAP is a disaster and completely the wrong
way to go.  Let's please stick with a single .deb packaging strategy
which has proven itself.

** Affects: chromium-browser (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: 19.10 chromium snap xubuntu

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1861453

Title:
  The chromium-browser snap package fails to run

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/chromium-browser/+bug/1861453/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1860936] [NEW] No online ksh (or csh) manual page

[C. Jeffery Small]

Public bug reported:

Although ksh(1) and csh(1) are supported packages, there does not appear
to be a manual page for either, under any release, at
http://manpages.ubuntu.com/

These should be added.

Accessing from Xubuntu 19.10.

** Affects: ubuntu-manpage-repository
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1860936

Title:
  No online ksh (or csh) manual page

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-manpage-repository/+bug/1860936/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1859526] Re: xfwm4 crashing after Xubuntu 19.10 upgrade

[C. Jeffery Small]

Following up:

The xfwm4 crashing problem has to do with defining more than one
independent screen in the /etc/X11/xorg.conf file.  This is a problem
observed by at least one other person.  By commenting out the second
screen in the ServerLayout section, it was possible to get the system
running using the Nvidia drivers.  Apparently this bug was also causing
audio output to fail for unknown reasons.  After the graphics problem
was rectified, proper sound operation was once again also restored.

I hope this information helps others experiencing this problem.  Follow
this issue at:

https://bugzilla.xfce.org/show_bug.cgi?id=15852


** Bug watch added: Xfce Bugzilla #15852
   https://bugzilla.xfce.org/show_bug.cgi?id=15852

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1859526

Title:
  xfwm4 crashing after Xubuntu 19.10 upgrade

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfwm4/+bug/1859526/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1859526] [NEW] xfwm4 crashing after Xubuntu 19.10 upgrade

[C. Jeffery Small]

Public bug reported:

After recovering from a failed upgrade from Xubuntu 19.04 to 19.10, I'm
left with a system where the xfwm4 window manager is constantly
crashing.  I get a desktop on my primary screen :0.0 but there is
neither a xfce4-panel nor a window manager.  With great difficulty I can
start apps, but without the window manager, there is no way to move,
resize or close them.  Overlapping or hidden windows remain as such.
You cannot use right-click or pull-down menus in most apps.

Every attempt to start xfwm4 results in a crash with a crash file in
/var/crash.

This message in kern.log:

Jan 12 20:22:38 dymaxion kernel: [   54.589712] traps:
xfwm4[5044] trap int3 ip:7fc4d1afb8e5 sp:7fff265927e0 error:0
in libglib-2.0.so.0.6200.1[7fc4d1ac+83000]

indicates that the problem is an interaction with
libglib-2.0.so.0.6200.1.  Both xfwm4 and the libglib package that
provides the above library have been reinstalled.

Any suggestions would be greatly appreciated as I'm pretty much dead in
the water at the moment.

PS: This bug was also reported to the XFCE group here:

https://bugzilla.xfce.org/show_bug.cgi?id=16374

** Affects: xfwm4 (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: 19.10 crash upgrade xfwm4

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1859526

Title:
  xfwm4 crashing after Xubuntu 19.10 upgrade

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfwm4/+bug/1859526/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1846510] Re: xfpanel-switch fails to save panel settings

[C. Jeffery Small]

Here it is.

** Attachment added: "xfce4-panel.xml"
   
https://bugs.launchpad.net/ubuntu/+source/xfpanel-switch/+bug/1846510/+attachment/5294139/+files/xfce4-panel.xml

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1846510

Title:
  xfpanel-switch fails to save panel settings

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfpanel-switch/+bug/1846510/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1846510] [NEW] xfpanel-switch fails to save panel settings

[C. Jeffery Small]

Public bug reported:

I originally reported this under bugid 1765565, but was asked to open
this report as a new bug.


I'm on Xubuntu 19.04, fully patched with xfpanel-switch version
1.0.7-ubuntu2 and I'm having the same or similar problem as noted by the
original reporter (bugid 1765565). When I start xfpanel-switch manually,
here are the errors reported upon startup, when the first save
configuration is pressed, and finally when Save Configuration is
selected from the pop-up menu. This may have existed in 18.10 (I don't
know) but I upgraded to 19.04 recently. The last saved config is labeled
Xubuntu Disco from 08-21-19. I cannot remember if I made this manually
or if it was done automatically as part of the upgrade.

234-> xfpanel-switch
/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py:132: 
DeprecationWarning: Gtk.Widget.override_background_color is deprecated
  self.xfce_header.override_background_color(0, base_color[1])
/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py:134: 
DeprecationWarning: Gtk.Widget.override_color is deprecated
  self.xfce_header.override_color(0, fg_color[1])

[press save configuration button]

/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py:309: 
PyGTKDeprecationWarning: The keyword(s) "message_format" have been deprecated 
in favor of "text" respectively. See: 
https://wiki.gnome.org/PyGObject/InitializerDeprecations
  _("Save Configuration"), Gtk.ResponseType.ACCEPT))
/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py:309: 
PyGTKDeprecationWarning: The "buttons" argument must be a Gtk.ButtonsType enum 
value. Please use the "add_buttons" method for adding buttons. See: 
https://wiki.gnome.org/PyGObject/InitializerDeprecations
  _("Save Configuration"), Gtk.ResponseType.ACCEPT))

[press Save Configuration to make backup from pop-up menu]

Traceback (most recent call last):
  File "/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py", line 221, 
in on_save_clicked
self.save_configuration(name)
  File "/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py", line 209, 
in save_configuration
PanelConfig.from_xfconf(self.xfconf).to_file(filename)
  File "/usr/share/xfpanel-switch/xfpanel-switch/panelconfig.py", line 65, in 
from_xfconf
pc.find_desktops()
  File "/usr/share/xfpanel-switch/xfpanel-switch/panelconfig.py", line 148, in 
find_desktops
self.remove_keys(rem_keys)
  File "/usr/share/xfpanel-switch/xfpanel-switch/panelconfig.py", line 155, in 
remove_keys
del self.properties[param]
KeyError: '/plugins/plugin-48'

Nothing happens and nothing is saved. An attempt to export the
configuration fails as follows:

[press the export button]

/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py:99: 
PyGTKDeprecationWarning: Using positional arguments with the GObject 
constructor has been deprecated. Please specify keyword(s) for "title, parent, 
action, buttons" or use a class specific constructor. See: 
https://wiki.gnome.org/PyGObject/InitializerDeprecations
  button, Gtk.ResponseType.ACCEPT))
/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py:99: 
PyGTKDeprecationWarning: The "buttons" argument must be a Gtk.ButtonsType enum 
value. Please use the "add_buttons" method for adding buttons. See: 
https://wiki.gnome.org/PyGObject/InitializerDeprecations
  button, Gtk.ResponseType.ACCEPT))

[Export configuration as ... pop-up appears. Regardless of where you
navigate, pressing Save fails]

Traceback (most recent call last):
  File "/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py", line 234, 
in on_export_clicked
self.save_configuration(filename, False)
  File "/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py", line 209, 
in save_configuration
PanelConfig.from_xfconf(self.xfconf).to_file(filename)
  File "/usr/share/xfpanel-switch/xfpanel-switch/panelconfig.py", line 65, in 
from_xfconf
pc.find_desktops()
  File "/usr/share/xfpanel-switch/xfpanel-switch/panelconfig.py", line 148, in 
find_desktops
self.remove_keys(rem_keys)
  File "/usr/share/xfpanel-switch/xfpanel-switch/panelconfig.py", line 155, in 
remove_keys
del self.properties[param]
KeyError: '/plugins/plugin-48'

[Nothing is written]

I have not deleted panels, but I have struggled with Xfce4 on my dual-
headed system since support for independent parallel desktops running
(non-Xinerama mode) on each screen in Xubuntu 18.10 was broken. This may
be due to moving to gtk3, but it is a serious degradation of service
since xfdesktop and xfce4-panel no longer honor the display option.
(Note: xfwm4 still works on two independent displays!) I mention this
first and foremost because I want to see this fixed, and second because
there were two different panels defined on this system at one point --
one for each display -- and that may have some bearing on what may be
causing this problem.  I'm running Xubuntu on a desktop Intel machine
with dual 4K monitors using a Nvidia Quadro K4000 GPU.

If you need further 

[Bug 1360071] Re: Scrollbar has non-standard operation

[C. Jeffery Small]

Just checking back.  It is now 09-30-19, I'm on Xubuntu 19.04, and this
has not yet been addressed in Synaptic 0.84.5.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1360071

Title:
  Scrollbar has non-standard operation

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/synaptic/+bug/1360071/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1765565] Re: xfpanel-switch is failing to save panel settings

[C. Jeffery Small]

I'm on Xubuntu 19.04, fully patched with xfpanel-switch version
1.0.7-ubuntu2 and I'm having the same or similar problem as noted by the
original reporter.  When I start xfpanel-switch manually, here are the
errors reported upon startup, when the first save configuration is
pressed, and finally when Save Configuration is selected from the pop-up
menu.  This may have existed in 18.10 (I don't know) but I upgraded to
19.04 recently.  The last saved config is labeled Xubuntu Disco from
08-21-19.  I cannot remember if I made this manually or if it was done
automatically as part of the upgrade.

234->  xfpanel-switch
/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py:132: 
DeprecationWarning: Gtk.Widget.override_background_color is deprecated
  self.xfce_header.override_background_color(0, base_color[1])
/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py:134: 
DeprecationWarning: Gtk.Widget.override_color is deprecated
  self.xfce_header.override_color(0, fg_color[1])


[press save configuration button]

/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py:309: 
PyGTKDeprecationWarning: The keyword(s) "message_format" have been deprecated 
in favor of "text" respectively. See: 
https://wiki.gnome.org/PyGObject/InitializerDeprecations
  _("Save Configuration"), Gtk.ResponseType.ACCEPT))
/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py:309: 
PyGTKDeprecationWarning: The "buttons" argument must be a Gtk.ButtonsType enum 
value. Please use the "add_buttons" method for adding buttons. See: 
https://wiki.gnome.org/PyGObject/InitializerDeprecations
  _("Save Configuration"), Gtk.ResponseType.ACCEPT))


[press Save Configuration to make backup from pop-up menu]

Traceback (most recent call last):
  File "/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py", line 221, 
in on_save_clicked
self.save_configuration(name)
  File "/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py", line 209, 
in save_configuration
PanelConfig.from_xfconf(self.xfconf).to_file(filename)
  File "/usr/share/xfpanel-switch/xfpanel-switch/panelconfig.py", line 65, in 
from_xfconf
pc.find_desktops()
  File "/usr/share/xfpanel-switch/xfpanel-switch/panelconfig.py", line 148, in 
find_desktops
self.remove_keys(rem_keys)
  File "/usr/share/xfpanel-switch/xfpanel-switch/panelconfig.py", line 155, in 
remove_keys
del self.properties[param]
KeyError: '/plugins/plugin-48'


Nothing happens and nothing is saved.  An attempt to export the configuration 
fails as follows:

[press the export button]

/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py:99: 
PyGTKDeprecationWarning: Using positional arguments with the GObject 
constructor has been deprecated. Please specify keyword(s) for "title, parent, 
action, buttons" or use a class specific constructor. See: 
https://wiki.gnome.org/PyGObject/InitializerDeprecations
  button, Gtk.ResponseType.ACCEPT))
/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py:99: 
PyGTKDeprecationWarning: The "buttons" argument must be a Gtk.ButtonsType enum 
value. Please use the "add_buttons" method for adding buttons. See: 
https://wiki.gnome.org/PyGObject/InitializerDeprecations
  button, Gtk.ResponseType.ACCEPT))

[Export configuration as ... pop-up appears.  Regardless of where you
navigate, pressing Save fails]

Traceback (most recent call last):
  File "/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py", line 234, 
in on_export_clicked
self.save_configuration(filename, False)
  File "/usr/share/xfpanel-switch/xfpanel-switch/xfpanel-switch.py", line 209, 
in save_configuration
PanelConfig.from_xfconf(self.xfconf).to_file(filename)
  File "/usr/share/xfpanel-switch/xfpanel-switch/panelconfig.py", line 65, in 
from_xfconf
pc.find_desktops()
  File "/usr/share/xfpanel-switch/xfpanel-switch/panelconfig.py", line 148, in 
find_desktops
self.remove_keys(rem_keys)
  File "/usr/share/xfpanel-switch/xfpanel-switch/panelconfig.py", line 155, in 
remove_keys
del self.properties[param]
KeyError: '/plugins/plugin-48'

[Nothing is written]


I have not deleted panels, but I have struggled with Xfce4 on my dual-headed 
system since support for independent parallel desktops running (non-Xinerama 
mode) on each screen in Xubuntu 18.10 was broken.  This may be due to moving to 
gtk3, but it is a serious degradation of service since xfdesktop and 
xfce4-panel no longer honor the display option.  (Note: xfwm4 still works on 
two independent displays!)  I mention this first and foremost because I want to 
see this fixed, and second because there were two different panels defined on 
this system at one point -- one for each display -- and that may have some 
bearing on what may be causing this problem.

If you need further config info from this system, please let be know.
I'm not currently sure where to look for the panel definitions and don't
want to much up my current working panel.

-- 
You received this bug notification because you 

[Bug 1843192] [NEW] Requesting update for xtide package

[C. Jeffery Small]

Public bug reported:

Xubuntu 19.04
Xtide 2.13.2 package from the standard package repository

There is a newer version of xtide available.  The current package is not
compiled against livxaw3dxft and consequently does not have support for
most Ubuntu fonts.  Adding this would be a great improvement.  For info,
see:

https://flaterco.com/xtide/faq.html

Q: The text in XTide windows uses uglyfont.

** Affects: xtide (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1843192

Title:
  Requesting update for xtide package

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xtide/+bug/1843192/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1822181] Re: Ubuntu 18.10 broke dual-screen dual-desktop configuration

[C. Jeffery Small]

I am VERY interested in continuing work on this.  I'm now running 19.04
and the problem persists.  I cannot change the status so please update
it.

There has been a long running discussion on the Xfce buglist which you
can review here:

https://bugzilla.xfce.org/show_bug.cgi?id=15116

The problem seems to be that the move to gtk3 is the source of the
condition as it has dropped support for multiple monitors.  Olivier
Fourdan is maintaining xfwm4 and he has apparently done something
internally that allows X11-aware applications to be launched on a
separate display (:0.1) in addition to the native display (:0.0), but
none of the other Xfce components such as the panel, desktop, etc have
the ability to run more than one instance on the main display.

In this forum discussion:

https://forum.xfce.org/viewtopic.php?pid=50336#p50336

member gert pointed to this patch in the gtk3 repository that seems to
indicate that multi-screen support has been added back into the toolkit.

https://github.com/xfce-
mirror/xfwm4/commit/b52c2f5b740434803342c471d4dcb5dd62eb99a1

However, this patched version of gtk has not yet made it into a Ubuntu
distribution.

Losing multi-headed independent desktop support has been a terrible step
backwards for Ubuntu.  Please look into this more closely and make sure
that the 19.10 release gets the tools required to get this capability
restored.

I'll provide additional info if necessary.  However, as an end0user in
this arena, I don't have more insights into the interactions of the
display components making up the various desktop environments.


On a couple of other forums, I asked whether there was another flavor of Ubuntu 
that was properly supporting multiple screens.  I received zero replies.  
Multiple independent desktops is critical (as opposed to Xinerama mode) so that 
material can be displayed statically on one display while changing workspaces 
on the other screen.

** Bug watch added: Xfce Bugzilla #15116
   https://bugzilla.xfce.org/show_bug.cgi?id=15116

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1822181

Title:
  Ubuntu 18.10 broke dual-screen dual-desktop configuration

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1822181/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1822866] Re: package sendmail-bin 8.15.2-12 failed to install/upgrade: installed sendmail-bin package post-installation script subprocess returned error exit status 2

[C. Jeffery Small]

Just adding another voice to this thread.  I had the same problem during
the upgrade.  The failure for sendmail-bin to properly configure caused
the sensible-mta, dovecot-core and inn2 packages to all fail to properly
update due to dependency problems.  Thanks to Mirko above, who suggested
a solution.  Stopping the sendmail service and running "apt install -f"
allowed the configuration to complete.

In case it is any help, here are the relevant log messages:


Messages from /var/log/dist-upgrade/main.log:

ERROR got an error from dpkg for pkg: 'sendmail-bin': 'installed sendmail-bin
package post-installation script subprocess returned error exit status 2'
2019-07-07 22:44:50,515 DEBUG running apport_pkgfailure() sendmail-bin:
installed sendmail-bin package post-installation script subprocess
returned error exit status 2
2019-07-07 22:44:50,528 ERROR got an error from dpkg for pkg: 'sendmail-bin':
   'installed sendmail-bin package post-installation script subprocess
   returned error exit status 2'
2019-07-07 22:47:47,560 ERROR got an error from dpkg for pkg: 'sendmail':
'dependency problems - leaving unconfigured'
2019-07-07 22:47:47,561 DEBUG running apport_pkgfailure() sendmail:
dependency problems - leaving unconfigured
2019-07-07 22:47:47,561 DEBUG dpkg error because of dependency problems,
not reporting against sendmail
2019-07-07 22:47:47,561 ERROR got an error from dpkg for pkg: 'sendmail':
'dependency problems - leaving unconfigured'
2019-07-07 22:47:47,758 ERROR got an error from dpkg for pkg: 'sensible-mda':
'dependency problems - leaving unconfigured'
2019-07-07 22:47:47,758 DEBUG running apport_pkgfailure() sensible-mda:
dependency problems - leaving unconfigured
2019-07-07 22:47:47,759 DEBUG dpkg error because of dependency problems,
not reporting against sensible-mda
2019-07-07 22:47:47,759 ERROR got an error from dpkg for pkg: 'sensible-mda':
'dependency problems - leaving unconfigured'
2019-07-07 22:47:48,269 ERROR got an error from dpkg for pkg: 'inn2':
'dependency problems - leaving unconfigured'
2019-07-07 22:47:48,270 DEBUG running apport_pkgfailure() inn2:
dependency problems - leaving unconfigured
2019-07-07 22:47:48,270 DEBUG dpkg error because of dependency problems,
not reporting against inn2
2019-07-07 22:47:48,270 ERROR got an error from dpkg for pkg: 'inn2':
'dependency problems - leaving unconfigured'
2019-07-07 22:47:52,116 ERROR got an error from dpkg for pkg: 'dovecot-core':
'triggers looping, abandoned'
2019-07-07 22:47:52,116 DEBUG running apport_pkgfailure() dovecot-core:
triggers looping, abandoned
2019-07-07 22:47:52,132 ERROR got an error from dpkg for pkg: 'dovecot-core':
'triggers looping, abandoned'
2019-07-07 22:51:47,341 ERROR Exception during pm.DoInstall()
Traceback (most recent call last):
  File "/tmp/ubuntu-release-upgrader-nggm0iiu/DistUpgrade/DistUpgradeView.py",
  line 220, in run res = pm.do_install(self.writefd)
apt_pkg.Error: E:Sub-process /usr/bin/dpkg returned an error code (1)
2019-07-07 22:51:47,369 ERROR SystemError from cache.commit():
installArchives() failed
2019-07-07 22:51:47,370 ERROR found exception: 'E:Sub-process /usr/bin/dpkg
returned an error code (1)'

2019-07-07 22:55:43,205 DEBUG Running PostInstallScript:
'./xorg_fix_proprietary.py'
2019-07-07 22:55:43,218 ERROR got error from PostInstallScript
./xorg_fix_proprietary.py (g-exec-error-quark: Failed to execute child
process “./xorg_fix_proprietary.py” (No such file or directory) (8))



Messages from /var/log/dist-upgrade/apt-term.log:

Setting up sendmail-bin (8.15.2-12) ...
Installing new version of config file /etc/init.d/sendmail ...
update-alternatives: warning: forcing reinstallation of alternative
/usr/lib/sm.bin/sendmail because link group sendmail-mta is broken
Saving old /etc/mail/sendmail.cf as /etc/mail/sendmail.cf.old ...
start-stop-daemon: matching only on non-root pidfile
/var/run/sendmail/mta/sendmail.pid is insecure
dpkg: error processing package sendmail-bin (--configure):
 installed sendmail-bin package post-installation script subprocess
 returned error exit status 2

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1822866

Title:
  package sendmail-bin 8.15.2-12 failed to install/upgrade: installed
  sendmail-bin package post-installation script subprocess returned
  error exit status 2

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/sendmail/+bug/1822866/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1825249] Re: fonts garbled in firefox browser -- only on certain pages

[C. Jeffery Small]

No, I haven't done that.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1825249

Title:
  fonts garbled in firefox browser -- only on certain pages

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1825249/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1822181] Re: Ubuntu 18.10 broke dual-screen dual-desktop configuration

[C. Jeffery Small]

As previously reported, I've tried a number of different Nvidia and the
X.Org drivers with no better results.

And as previously reported:
--
54-> xrandr
Screen 0: minimum 8 x 8, current 1600 x 1200, maximum 16384 x 16384
DVI-I-0 connected 1600x1200+0+0 (normal left inverted right x axis y axis) 
432mm x 324mm
   1600x1200 60.00*+
   1280x1024 85.0275.0260.02  
   1024x768  85.0075.0370.0760.00  
   800x600   85.0675.0072.1960.3256.25  
   640x480   85.0175.0072.8159.94  
DVI-I-1 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis

Note: No DP-3?  RandR must be numbering the display ports differently
from NVIDIA.

The above output is identical to what you get with the command:   xrandr
-display :0.0

However, you can probe the second screen with the command:   xrandr
-display :0.1

55-> xrandr -display :0.1 
Screen 1: minimum 8 x 8, current 1600 x 1200, maximum 16384 x 16384
DP-3 connected primary 1600x1200+0+0 (normal left inverted right x axis y axis) 
432mm x 324mm
   1600x1200 60.00*+
   1280x1024 85.0275.0260.02  
   1024x768  85.0075.0370.0760.00  
   800x600   85.0675.0072.1960.3256.25  
   640x480   85.0175.0072.8159.94  
--

So, as you can see, RandR DOES know about the second display, but it
does not properly integrate it into the system.

Since you say that Xfce is built upon RandR, I'd say that that may be
the place to start.

I don't know what is going on down at this level, but if someone in the
developer community thinks this is actually a RandR problem, please
change the target package from my guess of xfwm4 to libxrandr2 or
whatever you think appropriate.

Still, this is a lot of theorizing when someone in the developer group
could be testing this out on a dual screen configuration and see what
actually happens!

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1822181

Title:
  Ubuntu 18.10 broke dual-screen dual-desktop configuration

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfwm4/+bug/1822181/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1822181] Re: Ubuntu 18.10 broke dual-screen dual-desktop configuration

[C. Jeffery Small]

Steve, I also made an earlier report to Nvidia regarding this.  You
might consider adding a comment at the following link in order to prod
more discussion and involvement there as well.  Regards.

https://devtalk.nvidia.com/default/topic/1046553/linux/quadro-k4000
-second-monitor-problem-on-xubuntu-18-04/

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1822181

Title:
  Ubuntu 18.10 broke dual-screen dual-desktop configuration

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfwm4/+bug/1822181/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1822181] Re: Ubuntu 18.10 broke dual-screen dual-desktop configuration

[C. Jeffery Small]

Steve, thanks for looking into this with 19.04.  I wasn't expecting that
it would improve things, but I decided that if I was going to pour more
effort into this, U would wait for the next OS release.

Yes, the other post may not be directly relevant to our problem, but
it's still interesting.  I've thought that some underlying change may
have been made to disallow a second session manager to run, so this
might be a clue as to where to look.  I get the same xrandr results as
you.

% xrandr -q
Screen 0: minimum 8 x 8, current 1600 x 1200, maximum 16384 x 16384
DVI-I-0 connected 1600x1200+0+0 (normal left inverted right x axis y axis) 
432mm x 324mm
   1600x1200 60.00*+
   1280x1024 85.0275.0260.02  
   1024x768  85.0075.0370.0760.00  
   800x600   85.0675.0072.1960.3256.25  
   640x480   85.0175.0072.8159.94  
DVI-I-1 disconnected (normal left inverted right x axis y axis)
DP-0 disconnected (normal left inverted right x axis y axis)
DP-1 disconnected (normal left inverted right x axis y axis)
DP-2 disconnected (normal left inverted right x axis y axis)

% xrandr -display :0.1
Screen 1: minimum 8 x 8, current 1600 x 1200, maximum 16384 x 16384
DP-3 connected primary 1600x1200+0+0 (normal left inverted right x axis y axis) 
432mm x 324mm
   1600x1200 60.00*+
   1280x1024 85.0275.0260.02  
   1024x768  85.0075.0370.0760.00  
   800x600   85.0675.0072.1960.3256.25  
   640x480   85.0175.0072.8159.94

Now, can we get developers responsible for different parts of the OS
related to display recognition and the launching of xfce4 to please
coordinate on this problem and track down the source.  It definitely
happened due to a change from 18.04 to 18.10, so diffs between those two
versions is the place to look.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1822181

Title:
  Ubuntu 18.10 broke dual-screen dual-desktop configuration

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfwm4/+bug/1822181/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1822181] Re: Ubuntu 18.10 broke dual-screen dual-desktop configuration

[C. Jeffery Small]

Thanks Steve.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1822181

Title:
  Ubuntu 18.10 broke dual-screen dual-desktop configuration

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfwm4/+bug/1822181/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1822181] Re: Ubuntu 18.10 broke dual-screen dual-desktop configuration

[C. Jeffery Small]

Steve, glad to see that there is someone else with this problem, but
sorry that you are also experiencing the difficulties.

Like Steve, I tried using Xinerama and was able to get the single
desktop to span the two monitors, but starting a second desktop, as
desired, does not work.  This is why I identified the window manager as
a possible locus of the problem.  If someone thinks it relates to a
different package, please make the necessary change.

I have upgraded Xubuntu many times up through 18.04 and had no problem.
There is definitely something significant that changed in 18.10 that
caused this problem.  From the outside it is difficult to determine
where to point the finger as to what may be the source of the problem.
That is why I was hoping that a variety of people working on the core
components affecting this could look into it.  I tried to provide as
much configuration and diagnostics information as I could in order to
allow someone with a test setup to add a second monitor and configure it
for dual independent desktops and see what results you get.  As I said
before, this configuration should be part of the standard testing before
any release, and well documented.

BTW, I've also been (long ago) in discussions with the Nvidia people and
they/I don't think it has anything to do with their driver.  I tried a
number of different Nvidia driver packages as well as the Xorg version,
and nothing made any difference.

I will upgrade and test with 19.04 when released (what have I got to
lose) but this machine is my live work system and I really cannot screw
with it too much as a test bed.

And like Steve, I'll happily provide any additional info I can, upon
request.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1822181

Title:
  Ubuntu 18.10 broke dual-screen dual-desktop configuration

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfwm4/+bug/1822181/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1825249] [NEW] fonts garbled in firefox browser -- only on certain pages

[C. Jeffery Small]

Public bug reported:

Xubuntu 18.10 and earlier releases
Firefox browser 66.0.3 and every earlier version of the Quantum releases

There has been a font display problem on Firefox add-on pages (and a
very few other random sites) ever since the Quantum browser was
released.  I reported this to the Firefox team well over a year ago
here:

https://bugzilla.mozilla.org/show_bug.cgi?id=1437338

with periodic follow-up here:

https://bugzilla.mozilla.org/show_bug.cgi?id=1446688

You can see a recent example of the problem here:

http://smallthoughts.com/photos/misc/firefox_66_01.png

Now, while I'm convinced that this is likely a Firefox problem, I cannot
get anyone there to reproduce the problem.  So on the chance that it's
related to some font glitch on the Ubuntu system, I'm reporting it here
to see if anyone can reproduce the problem.  If you could load a recent
version of Firefox and visit this (or any add-on) page:

https://addons.mozilla.org/en-US/firefox/addon/autofill-
quantum/?src=search

and see if you observe what I'm observing, it would be great in helping
track down the source of this extremely annoying glitch.  BTW, this ONLY
happen in Firefox, not in the Chromium or Opera browsers, and it does
not happen in Firefox running under Windows 10 in a VM on the same
machine.

Thanks for any insights as to what might be causing this.

** Affects: firefox (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1825249

Title:
  fonts garbled in firefox browser -- only on certain pages

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/firefox/+bug/1825249/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1822181] Re: Ubuntu 18.10 broke dual-screen dual-desktop configuration

[C. Jeffery Small]

Is there anyone else in the Xubuntu world running a dual monitor dual
desktop configuration?

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1822181

Title:
  Ubuntu 18.10 broke dual-screen dual-desktop configuration

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfwm4/+bug/1822181/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1822181] Re: Ubuntu 18.10 broke dual-screen dual-desktop configuration

[C. Jeffery Small]

Any takers?

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1822181

Title:
  Ubuntu 18.10 broke dual-screen dual-desktop configuration

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfwm4/+bug/1822181/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1822181] Re: Ubuntu 18.10 broke dual-screen dual-desktop configuration

[C. Jeffery Small]

This is an automated message:

OK automated message, I'd be happy to list a specific source package if
I knew what it might be.  I really am not sure what might be responsible
here any more than the people in the Xfce group were.  If some humans on
the team could review this issue and have a suggestion as to where to
focus, I would be happy to add one or more packages or let others fill
in that info.  I'm not sure how the core Ubuntu system is broken down.

I'll tag it against xfwm4, but I'm not sure that the problem is more
fundamental than at the window manager level.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1822181

Title:
  Ubuntu 18.10 broke dual-screen dual-desktop configuration

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfwm4/+bug/1822181/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1822181] Re: Ubuntu 18.10 broke dual-screen dual-desktop configuration

[C. Jeffery Small]

Not sure that this is the correct package, but it's a starting point.

** Package changed: ubuntu => xfwm4 (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1822181

Title:
  Ubuntu 18.10 broke dual-screen dual-desktop configuration

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfwm4/+bug/1822181/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1822181] [NEW] Ubuntu 18.10 broke dual-screen dual-desktop configuration

[C. Jeffery Small]

Public bug reported:

I'm running Xubuntu.  I finally reported this problem to the Xfce group
and received this response:

"As arandr/xrandr does not detect correctly your 2nd screen, this seems
that it is not related directly to Xfce, but a bug in Xubuntu stack.
Can you please open a bug on Xubuntu project if the issue is still
present for you?"

Thus this bug report.


I've been running Xubuntu for years with two monitors, each running an 
independent xfce4 desktop -- i.e., configured without Xinerama. This has worked 
fine for every upgrade through 18.04.  When upgrading to 18.10, something 
significant changed and the the second monitor (display :0.1) was disabled.  
After much reading and work, I have only been able to restore some extremely 
hobbled functionality.  I am unable to get a second xfce4-desktop, panel or 
window manager running on the second screen.  I have assembled detailed 
screenshots and command output at the following link:

http://smallthoughts.com/xfce/xfce.html

I'm using an NVIDIA Quadro K-4000 graphics card and no hardware changes
were made between 18.04 and 18.10.

The nvidia-settings tool reports both monitors active (as configured in
/etc/X11/xorg.conf) but the xfce4-display-settings and aarandr tools
each show only one display (although xrandr can be forced to report on
the second display.  See full documentation at the above link.)

What changed in the latest release, and what needs to be done to get the
second monitor running a second desktop once again?  I have been
struggling with this for many months now and it has severely impacted
the use of my system.  As a new release of Ubuntu in coming, I would
appreciate it if this could be prioritized and addressed as quickly as
possible.

I will provide additional information upon request.

P.S.:  There is really no documentation available on running multiple
desktops on separate screens when Xinerama is not used to tie the
screens together into a single desktop.  This is a common configuration
and I would like to request that as part of the solution to this
problem, the setup steps be documented and this multi-desktop
configuration be made a standard part of the development and testing
process for each Ubuntu release.

13-> lsb_release -rd
Description:Ubuntu 18.10
Release:18.10

** Affects: ubuntu
 Importance: Undecided
 Status: New


** Tags: 18.10 desktop dual-screen xubuntu

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1822181

Title:
  Ubuntu 18.10 broke dual-screen dual-desktop configuration

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1822181/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1814838] Re: xpdf

[C. Jeffery Small]

There is now a 4.01.01 version.  I have found that the pre-compiled
versions on the XpdfReader.com site do not properly support printing to
local printers, but a custom compiled version under Xubuntu 18.10 with
system libraries does work.  Please check that cups printers are
displayed on the print dialog before packaging.

Regards.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1814838

Title:
  xpdf

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xpdf/+bug/1814838/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1814838] [NEW] xpdf

[C. Jeffery Small]

Public bug reported:

Ubuntu 18.10

There is a new version 4.00.01 of xpdf and associated tools, available
since 08-15-17.  The current 3.04 version should be updated in the
package archives.


http://www.xpdfreader.com/download.html

** Affects: ubuntu
 Importance: Undecided
 Status: New


** Tags: xpdf

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1814838

Title:
  xpdf

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1814838/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1243354] Re: Xfce4-terminal cannot run on more than one X screen at a time

[C. Jeffery Small]

Xubuntu 18.04:

I also have two screens running two different Xfce sessions, and like
others reporting here, I have had a devil of a time getting this
xfce4-terminal program to run on the two monitors by specifying the
--display=:0.0 and --display=:0.1 options.  I have a script that
launches the terminal windows on the appropriate screen using the proper
options.  This works -- then it stops working.  Then I get it working
again and then it stops working again.  This has been going on for
years.

A short while ago I had to dive into this yet again and I got things
working so that I could open terminals on both screens. This has been
good now for the past few weeks.  There were no recent upgrades on the
system, but I had some sort of smbd(8) fault a short while ago and
decided to reboot.  When the system came up, I simply could not get
xfce4-terminal to start on display :0.1.  Even if I selected Terminal
Emulator from the built-in Applications menu on the second screen, it
would still only start on display :0.0.  After another reboot and then
screwing around for two more hours, I went looking for a place to report
this and found this old thread that was -- unbelievably -- still active.
Fortunately for me, I saw the comments above that recommend using the
--disable-server option.  I added this to my script and now I can open
terminals on both screens once again.  Since the manpage says:

-disable-server:   Do not register with the D-BUS session message bus

I'd say this pretty clearly points to a D-BUS problem.  Would someone
who in maintaining the terminal program check back regarding the history
of D-BUS implementation back in 2013 onward and then coordinate to get
this resolved.  At the very least, deactivate the server option and
allow it to be turned on if desired, in order to stop users from pulling
out their hair.  The amount of time wasted on this problem by me alone
is ... a lot!  Regards.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1243354

Title:
  Xfce4-terminal cannot run on more than one X screen at a time

To manage notifications about this bug go to:
https://bugs.launchpad.net/xfce4-terminal/+bug/1243354/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1789759] [NEW] All online manpages formatted very badly

[C. Jeffery Small]

Public bug reported:

OS: Xubuntu 18.04

Tested browsers: Firefox 61.0.1, Chromium 68.0.3440.106

See: http://manpages.ubuntu.com/manpages/

In some recent attempt to reformat the Ubuntu online manual pages, some
disastrous decisions were made.

First, the overall appearance of the pages looks extremely childish.  As
with so many poor UI decisions being made by companies these days, most
of the screen is now filled with white space rather than content.  This
doesn't improve readability, it just makes it harder to locate and read
the content as so much scrolling is required.  I strongly suggest a
redesign that imposes some fundamental readability metrics.


Much more importantly, there is a very serious bug which can be seen in the 
attached image.  The text boxes which contain the section content for the man 
pages do not wrap the text.  The content line lengths are fixed and force a 
horizontal scrollbar for any reasonable browser width that is not set to 
full-screen.  This makes it next to impossible to read the content as you must 
scroll back and forth for every line!


When I looked at the manpages using Opera 55.0.2994.44, there are not any 
scrollbars at all -- neither for the content boxes nor the page overall.  Opera 
scrolling works fine for all other sites I visit.


Please fix this ASAP.  Thanks.

** Affects: synaptic (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: manpage ubuntu ui-design

** Attachment added: "Example screenshot of a manual page"
   
https://bugs.launchpad.net/bugs/1789759/+attachment/5182399/+files/ubuntu_02.jpg

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1789759

Title:
  All online manpages formatted very badly

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/synaptic/+bug/1789759/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1754886] Re: Eclipse fails to start on fresh 18.04 installation

[C. Jeffery Small]

I don't understand how things as critical as this are not being fixed
immediately?  Netbeans also fails to start.  This is a java problem in
both cases.

https://bugs.launchpad.net/ubuntu/+source/eclipse/+bug/1775766

https://bugs.launchpad.net/ubuntu/+source/netbeans/+bug/1763091

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1754886

Title:
  Eclipse fails to start on fresh 18.04 installation

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/eclipse/+bug/1754886/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1777296] [NEW] Synaptic scrollbar does not work properly

[C. Jeffery Small]

Public bug reported:

Xubuntu 18.04
Synaptic 0.84.3

Many years ago this problem was reported and it still has not been
addressed.

The main scrollbar works opposite of almost all other scrollbars
everywhere.  If you B1 click in the scrollbar gutter (i.e., above or
below the movable bar), the contents jumps to the current mouse
position.  If you B2 click in the gutter, the contents scrolls a page at
a time.  This B1 and B2 behavior should be flipped to agree with the
world and make a predictable product.

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1777296

Title:
  Synaptic scrollbar does not work properly

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1777296/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1716749] Re: Synaptics is not fully aware of display environment

[C. Jeffery Small]

Well, it's 06-16-2018 and we're up to Xubuntu 18.04 and this problem has
not been addressed.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1716749

Title:
  Synaptics is not fully aware of display environment

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1716749/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1776576] Re: Ubuntu 18.04 uograde: samba fails to run

[C. Jeffery Small]

Sorry for the delay in responding.  Everything is finally resolved.
Here is what I found.

The Ubuntu OS was upgraded for a week and the system was rebooted
multiple times before I noticed the samba problem.  At that point, in
addition to trying to start the samba-ad-dc service, I also had tried
manually to start smbd and nmbd multiple times and received similar
error messages with a failure of either starting.  Since the services
were not running there was no output in the /var/log/samba log files.
Running testparm was showing no problems other than the unimportant
warnings:

rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
WARNING: The "syslog" option is deprecated

neither of which should cause any problem. I do not believe that I
changed anything significant, yet upon another system reboot both smbd
and nmbd services started automatically and they continue to run
properly upon subsequent reboots.  I'm afraid I cannot explain why this
is the case.  Things like this are usually user error, but I cannot
identify what may have been the problem.

Now, the Ubuntu system could see the samba and external Windows shares.
However, the Windows 10 machines could not see the samba server!  This
turned out to be due to a recent push of Windows 10 version 1803 which
changed smb behavior by disabling the SMBv1 protocol, supporting only v2
and v3 by default.  Now, why samba could not negotiate using these
protocols is unclear, but the workaround was to re-enable SMBv1 on the
Windows 10 machines, at which point they could negotiate with samba once
again.  A second difficulty was that it was impossible to connect to the
samba server using the normal username and password that had worked in
the past.  The only solution I was able to discover was that the
connection had to be established with hostname\username rather than
username alone.  Then everything was back to normal.

Someone may want to take a look at Windows 10 v1803 to see how it is
interacting with the standard samba configuration.  In the future
Microsoft may eliminate support for SMBv1 altogether.

Sorry I don't have anything more definitive as to why smbd/nmbd were not
running, but I really appreciate the feedback and support.  Let me know
if I can provide any additional useful information.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1776576

Title:
  Ubuntu 18.04 uograde: samba fails to run

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/samba/+bug/1776576/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1776576] Re: Ubuntu 18.04 uograde: samba fails to run

[C. Jeffery Small]

A slightly modified smb.conf for conceal some personal info.

** Attachment added: "smb.conf"
   
https://bugs.launchpad.net/ubuntu/+source/samba/+bug/1776576/+attachment/5151907/+files/smb.conf

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1776576

Title:
  Ubuntu 18.04 uograde: samba fails to run

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/samba/+bug/1776576/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1776576] [NEW] Ubuntu 18.04 uograde: samba fails to run

[C. Jeffery Small]

Public bug reported:

Samba has been running properly in all previous version of Xubuntu up
through 17.10 with server role = standalone.

After the 18.04 upgrade, all samba services fail to start as noted
below.  numerous changes were made, including advice from the net to add
"client max protocol = NT1" to smb.conf, all with no success.

A last-ditch attempt to reinstall the samba 2:4.7.6+dfsg~ubuntu-0ubuntu2
from synaptic fails with the pop-up error message:

E: samba: installed samba package post-installation script subprocess
returned error exit status 1

The log output is attached.

An attempt to start the samba service:

# service  samba-ad-dc start
Job for samba-ad-dc.service failed because the control process exited with 
error code.
See "systemctl status samba-ad-dc.service" and "journalctl -xe" for details.

# systemctl status samba-ad-dc.service
● samba-ad-dc.service
   Loaded: masked (/dev/null; bad)
   Active: failed (Result: exit-code) since Tue 2018-06-12 15:34:02 PDT; 17min 
ago
 Main PID: 27780 (code=exited, status=1/FAILURE)
   Status: "daemon failed to start: Samba detected misconfigured 'server role' 
and exited. Check logs for details"

Jun 12 15:34:02 dymaxion.cjsa2.com systemd[1]: Starting Samba AD Daemon...
Jun 12 15:34:02 dymaxion.cjsa2.com samba[27780]: handle_name_resolve_order: 
WARNING: Ignoring invalid list value '
Jun 12 15:34:02 dymaxion.cjsa2.com systemd[1]: samba-ad-dc.service: Main 
process exited, code=exited, status=1/FAI
Jun 12 15:34:02 dymaxion.cjsa2.com systemd[1]: samba-ad-dc.service: Failed with 
result 'exit-code'.
Jun 12 15:34:02 dymaxion.cjsa2.com systemd[1]: Failed to start Samba AD Daemon.

# A second (and subsequent) attempt to start samba:

# service samba-ad-dc start
Failed to start samba-ad-dc.service: Unit samba-ad-dc.service is masked.

I tried a number of options to unmask and start the samba services with
no success.

Many people seem to be having great difficulty with samba now, but I
located no clear instructions for addressing the problem which seems
might be related to the active directory component.

I would expect an upgrade to a properly configured system to continue to
run.  I'm guessing that there is a fundamental configuration problem
here, but possibly a deeper level bug.  I will also attach the smb.conf.
file to this report.  Guidance is appreciated.

** Affects: samba (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: 18.04 samba xubuntu

** Attachment added: "Samba package installation log"
   https://bugs.launchpad.net/bugs/1776576/+attachment/5151906/+files/samba

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1776576

Title:
  Ubuntu 18.04 uograde: samba fails to run

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/samba/+bug/1776576/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1775770] [NEW] netbeans runtime error

[C. Jeffery Small]

Public bug reported:

As with eclipse, netbeans was running under 17.10 but fails after the
18.04 upgrade.  When started as either:

/usr/bin/netbeans

or

/usr/bin/netbeans --jdkhome /usr/lib/jvm/default-java
(NOTE: default-java points to java-1.11.0-openjdk-amd64)

It generates the following error and exits:

WARNING: An illegal reflective access operation has occurred
WARNING: Illegal reflective access by org.netbeans.ProxyURLStreamHandlerFactory 
(file:/usr/share/netbeans/platform18/lib/boot.jar) to field java.net.URL.handler
WARNING: Please consider reporting this to the maintainers of 
org.netbeans.ProxyURLStreamHandlerFactory
WARNING: Use --illegal-access=warn to enable warnings of further illegal 
reflective access operations
WARNING: All illegal access operations will be denied in a future release

This is netbeans 8.1+dfsg3-4

** Affects: netbeans (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1775770

Title:
  netbeans runtime error

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/netbeans/+bug/1775770/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1775766] [NEW] eclipse java runtime error error

[C. Jeffery Small]

Public bug reported:

Eclipse was running properly under 17.10.  After the upgrade to 18.04,
attempts to start it produce the following error:

!SESSION Thu Jun 07 22:26:49 PDT 2018 --
!ENTRY org.eclipse.equinox.launcher 4 0 2018-06-07 22:26:49.702
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.ClassNotFoundException: 
org.eclipse.core.runtime.adaptor.EclipseStarter
at java.base/java.net.URLClassLoader.findClass(URLClassLoader.java:466)
at java.base/java.lang.ClassLoader.loadClass(ClassLoader.java:566)
at java.base/java.lang.ClassLoader.loadClass(ClassLoader.java:499)
at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:626)
at org.eclipse.equinox.launcher.Main.basicRun(Main.java:584)
at org.eclipse.equinox.launcher.Main.run(Main.java:1438)
at org.eclipse.equinox.launcher.Main.main(Main.java:1414)


I have reinstalled all the eclipse and core java packages with no improvement.

eclipse 3.8.1-11
libcj-java 3.13.3-1
java-common 0.63ubuntu1~02
default-jre 2:1.10-63ubuntu1~02
default-jdk 2:1.10-63ubuntu1~02

** Affects: eclipse (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1775766

Title:
  eclipse java runtime error error

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/eclipse/+bug/1775766/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1775347] Re: Upgrade to 18.04 caused wrong graphics driver to be installed

[C. Jeffery Small]

The update status link in the above comment does not work.  I don't see
an option on this page to update/edit the status.

This seems like an installation issue and not something related to a
package, but if I had to select a package related to this, I would say:

nvidia-driver-390  390.48-0ubuntu3  NVIDIA driver metapackage

I hope that helps and that someone can assign this info to the package
section.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1775347

Title:
  Upgrade to 18.04 caused wrong graphics driver to be installed

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-nouveau/+bug/1775347/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1775349] Re: services(5) manual page formatting is screwed up for bionic

[C. Jeffery Small]

Also: netstt(8), route(8), ufw(8), iptables(8), etc. etc.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1775349

Title:
  services(5) manual page formatting is screwed up for bionic

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1775349/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1775349] Re: services(5) manual page formatting is screwed up for bionic

[C. Jeffery Small]

Same problem with service(8) manpage.  Someone should bake a full check
of the manual pages.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1775349

Title:
  services(5) manual page formatting is screwed up for bionic

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1775349/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1775347] [NEW] Upgrade to 18.04 caused wrong graphics driver to be installed

[C. Jeffery Small]

Public bug reported:

Upgrading Xubuntu 17.10 to 18.04
Using Nvidia Quadro K4000 Graphics Card with proprietary driver and dual screens

After the upgrade, which went smoothly, only one screen was recognized
and the system was almost unusable.  The Xorg process was running wild,
consuming almost all the CPU.  It was difficult to move the cursor and
all screen updates were incredibly slow.  I suspected the graphics
driver and saw that the Nvidia driver had been replaced with the X.Org
Nouveau open source driver.  I checked the available drivers with:

7-> ubuntu-drivers devices
== /sys/devices/pci:00/:00:03.0/:04:00.0 ==
modalias : pci:v10DEd11FAsv10DEsd097Cbc03sc00i00
vendor   : NVIDIA Corporation
model: GK106GL [Quadro K4000]
driver   : nvidia-driver-390 - distro non-free recommended
driver   : nvidia-340 - distro non-free
driver   : xserver-xorg-video-nouveau - distro free builtin

After reinstalling the proprietary driver with the command:

8-> sudo apt install nvidia-driver-390

and rebooting the system, everything was back to normal.

I have had similar driver replacement problems with past upgrades.  Why
doesn't the upgrade register and reinstall the proper graphics driver?
And why is the default driver so abysmal with a standard Nvidia card?
This should be fixed in future upgrades.

** Affects: ubuntu
 Importance: Undecided
 Status: New


** Tags: driver nvidia xubuntu

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1775347

Title:
  Upgrade to 18.04 caused wrong graphics driver to be installed

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1775347/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1775349] [NEW] services(5) manual page formatting is screwed up for bionic

[C. Jeffery Small]

Public bug reported:

See: http://manpages.ubuntu.com/manpages/bionic/en/man5/services.5.html

The formatting for this page is bad.  It was OK in artful.

See attached image.

** Affects: ubuntu
 Importance: Undecided
 Status: New

** Attachment added: "Screenshot of services(5) manpage"
   
https://bugs.launchpad.net/bugs/1775349/+attachment/5149229/+files/Screenshot_2018-06-06_01-00-30.jpg

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1775349

Title:
  services(5) manual page formatting is screwed up for bionic

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1775349/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1716749] [NEW] Synaptics is not fully aware of display environment

[C. Jeffery Small]

Public bug reported:

In a dual monitor environment where separate Xfce4 desktops are running
on each monitor, you can start Synaptic in either desktop environment,
but if you start it on display :0.1, it shows the Authenticate pop-up
window on display :0.0.  Once the password is entered, the main window
will then appear on display :0.1.  All the components of a given program
should be display-environment-aware.

There are a number of system applications that have similar problems.
I'll report them as I continue to encounter this problem.

ProblemType: Bug
DistroRelease: Ubuntu 17.04
Package: xorg 1:7.7+16ubuntu3
ProcVersionSignature: Ubuntu 4.10.0-33.37-generic 4.10.17
Uname: Linux 4.10.0-33-generic x86_64
NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
ApportVersion: 2.20.4-0ubuntu4.5
Architecture: amd64
CurrentDesktop: XFCE
Date: Tue Sep 12 11:21:53 2017
ProcEnviron:
 LANGUAGE=en_US
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=
 LANG=C.UTF-8
 SHELL=/bin/ksh
SourcePackage: xorg
Symptom: display
UpgradeStatus: Upgraded to zesty on 2017-05-27 (108 days ago)

** Affects: xorg (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug zesty

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1716749

Title:
  Synaptics is not fully aware of display environment

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1716749/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1526450] Re: /usr/sbin/update-apt-xapian-index:ImportError:/usr/sbin/update-apt-xapian-index@104:setupIndexing:__init__:__init__:load_source:_load:_load_unlocked:exec_module:_call_with_frames_rem

[C. Jeffery Small]

FYI:  I really know little about this issue, but I upgraded to Xubuntu
16.04 about six weeks ago and received this error report from anacron
last night.  I never saw this on earlier releases, and this is the first
time it has occurred since the upgrade.  After researching the error
message, I thought I would post this here as it may indicate that the
bug persists.  Regards.

From: Anacron 
To: r...@cjsa.com
Subject: Anacron job 'cron.weekly' on dymaxion.cjsa2.com

/etc/cron.weekly/apt-xapian-index:
Exception ignored in: >
Traceback (most recent call last):
  File "/usr/lib/python3/dist-packages/axi/indexer.py", line 306, in __del__
TypeError: 'NoneType' object is not callable

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1526450

Title:
  /usr/sbin/update-apt-xapian-index:ImportError:/usr/sbin/update-apt-
  xapian-
  
index@104:setupIndexing:__init__:__init__:load_source:_load:_load_unlocked:exec_module:_call_with_frames_removed:/usr/share
  /apt-xapian-index/plugins/software_center.py@13:/usr/share/software-
  center/softwarecenter/db/update.py@33:/usr/share/software-
  center/softwarecenter/backend/scagent.py@26

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/software-center/+bug/1526450/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1584254] [NEW] Missing online manual pages for tightvncserver package

[C. Jeffery Small]

Public bug reported:

There is an online manual page for xtightvncviewer at:

http://manpages.ubuntu.com/manpages/wily/en/man1/xtightvncviewer.1.html

However, all the links to related programs on this page, including:

vncserver(1), Xvnc(1), vncpasswd(1), vncconnect(1)

are broken links.  Most of these utilities (excluding Xvnc),are a part
of the tightvncserver package and are installed locally with this
package.  They should also be installed online.

There is possibly a namespace conflict with other VNC packages which
needs to be resolved.

** Affects: tightvnc (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1584254

Title:
  Missing online manual pages for tightvncserver package

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/tightvnc/+bug/1584254/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1443002] [NEW] RawTherapee causes exceptions with xfce4

[C. Jeffery Small]

Public bug reported:

Xubuntu 14.10
Xfce4 4.10.1
RawTherapee 4.0.12+dfsg-2

RawTherapee runs fine under normal usage.  However every attempt to
change the theme or font:

Preferences-General-Select Theme  (or Select Font)

causes the display/desktop/window manager to disappear and then
redisplay.  The RawTherapee theme or font does update as expected.
However, if you perform these operation more than a couple of times, the
window manager crashes for good, leaving a bare RawTherapee application
running without window controls, no desktop panel and no means of
switching desktops using keyboard shortcuts.  The only solution
available appears to be to drop into a console window, kill the upstart
--user process and login once again.

The first couple of times this occurred I got a pop-up error report
window, but did not immediately submit a bug report.  After the first
display manager failure, this option was no longer presented upon
subsequent attempts to change the RawTherapee theme.

Other than this faulty manager interaction, all programs seem to operate
without problems.

** Affects: rawtherapee (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: rawtherepee xubuntu

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1443002

Title:
  RawTherapee causes exceptions with xfce4

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/rawtherapee/+bug/1443002/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1415651] [NEW] Serious problem with /lib/lsb/init-dunctions.d/01-upstart-lsb

[C. Jeffery Small]

Public bug reported:

Ubuntu server 14.10 with xfce4 desktop

Any attempt to halt samba with either service samba stop or
/etc/init.d/samba stop fails with the following message:

stop: Unknown instance:

Examining /etc/init.d/samba shows that stop issues:

stop)
/etc/init.d/samba-ad-dc stop
/etc/init.d/smbd stop
/etc/init.d/nmbd stop

Running   /etc/init.d/smbd stop  and   /etc/init.d/nmbd stop
manually work properly.

Running /etc/init.d/samba-ad-dc stop produces the error message above
and no processes are haulted.  However, I did notice that if I move into
the /etc/init.d directory and issue either   samba-ad-dc stop   or
./samba-ad-dc stop   then the script works and the samba process is
indeed haulted.

I added set -x to the stop of the samba-ad-dc script and observed the
following:

# samba-ad-dc stop
+ PIDDIR=/var/run/samba
+ SAMBAPID=/var/run/samba/samba.pid
+ unset TMPDIR
+ test -x /usr/sbin/samba -a -r /etc/samba/smb.conf
+ . /lib/lsb/init-functions
+ run-parts --lsbsysinit --list /lib/lsb/init-functions.d
+ [ -r /lib/lsb/init-functions.d/01-upstart-lsb ]
+ . /lib/lsb/init-functions.d/01-upstart-lsb
+ unset UPSTART_SESSION
+ _RC_SCRIPT=samba-ad-dc
+ [ -r /etc/init/samba-ad-dc.conf ]
+ which initctl
+ initctl version
+ grep -q upstart
+ exit 0

I restarted samba and then tried the following:

#/etc/init.d/samba-ad-dc stop
+ PIDDIR=/var/run/samba
+ SAMBAPID=/var/run/samba/samba.pid
+ unset TMPDIR
+ test -x /usr/sbin/samba -a -r /etc/samba/smb.conf
+ . /lib/lsb/init-functions
+ run-parts --lsbsysinit --list /lib/lsb/init-functions.d
+ [ -r /lib/lsb/init-functions.d/01-upstart-lsb ]
+ . /lib/lsb/init-functions.d/01-upstart-lsb
+ unset UPSTART_SESSION
+ _RC_SCRIPT=/etc/init.d/samba-ad-dc
+ [ -r /etc/init//etc/init.d/samba-ad-dc.conf ]
+ _UPSTART_JOB=samba-ad-dc
+ [ -r /etc/init/samba-ad-dc.conf ]
+ which initctl
+ initctl version
+ grep -q upstart
+ initctl status samba-ad-dc
+ exec stop samba-ad-dc
stop: Unknown instance:

Note that the functions in /lib/lsb/init-functions are loaded and then
/lib/lsb/init-functions.d/01-upstart-lsb is run.  Check out the next
couple of lines.  When the fully qualified path /etc/init/samba-ad-dc is
used, this function fails to first properly strip it to its basename
before readding the etc/init/ path component.  This causes the
subsequent line:

if [ -r /etc/init/${_RC_SCRIPT}.conf ]  which initctl /dev/null \
initctl version 2/dev/null | grep -q upstart

to fail.  The unknown instance message must be issued from
/sbin/initctl.

More investigation needs to be done.  I will report any additional
information I discover.  I see a lot of different bug reports related to
this stop: Unknown instance: message, and I wonder if they are not all
related.

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1415651

Title:
  Serious problem with /lib/lsb/init-dunctions.d/01-upstart-lsb

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1415651/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1415699] [NEW] Problem with the ifup(8), ifdown(8) ifquery(8) online manual pages

[C. Jeffery Small]

Public bug reported:

Ubuntu 14.10:

When accessing the ifup(8) and ifdown(8) and ifquery(8) manual pages
online:

http://manpages.ubuntu.com/manpages/utopic/en/man8/ifup.8.html
http://manpages.ubuntu.com/manpages/utopic/en/man8/ifdown.8.html
http://manpages.ubuntu.com/manpages/utopic/en/man8/ifquery.8.html

The actual content is for  netscript - netscript network configuration
command.

Oddly enough, this is broken for lucid, precise and utopic, but works
properly in trusty (14.04).

** Affects: ubuntu
 Importance: Undecided
 Status: New

** Summary changed:

- Problem with the ifdown(8) online manual page
+ Problem with the ifup(8), ifdown(8)  ifquery(8) online manual pages

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1415699

Title:
  Problem with the ifup(8), ifdown(8)  ifquery(8) online manual pages

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1415699/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1362963] Re: findsmb command is missing from smbclient package

[C. Jeffery Small]

Rather than make a separate bug report, I'll just add that swat is also
missing from the distribution.  There is no local or online manual page
for this utility in 14.10 and synaptic does not show anything, so it may
have been intentionally dropped.  Worth confirming.

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to samba in Ubuntu.
https://bugs.launchpad.net/bugs/1362963

Title:
  findsmb command is missing from smbclient package

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/samba/+bug/1362963/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 1362963] Re: findsmb command is missing from smbclient package

[C. Jeffery Small]

Rather than make a separate bug report, I'll just add that swat is also
missing from the distribution.  There is no local or online manual page
for this utility in 14.10 and synaptic does not show anything, so it may
have been intentionally dropped.  Worth confirming.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1362963

Title:
  findsmb command is missing from smbclient package

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/samba/+bug/1362963/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1415142] [NEW] lpstat(1) and cancel(1) online manual pages corrupted

[C. Jeffery Small]

Public bug reported:

Ubuntu 14.10 utopic

Try to look up lpstat(1) command:

http://manpages.ubuntu.com/cgi-
bin/search.py?q=lpstatop=cx=003883529982892832976%3A5zl6o8w6f0scof=FORID%3A9ie=UTF-8

Select the utopic entry for lpstat(1):

http://manpages.ubuntu.com/manpages/utopic/en/man1/lpstat.1.html

This page content is for the cancel command.  Note header/content
mismatch.  Same results for trusty and precise.  lucid works.

Interestingly, now try looking up cancel(1):

http://manpages.ubuntu.com/cgi-
bin/search.py?q=cancelop=cx=003883529982892832976%3A5zl6o8w6f0scof=FORID%3A9ie=UTF-8siteurl=

utopic, trusty and precise yield the proper page, but lucid now points
to a page with the lprm(1) content!

An integrity check should be written for the manual pages to insure that
the topic links match an entry in the SYNOPSIS field.

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1415142

Title:
  lpstat(1) and cancel(1) online manual pages corrupted

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1415142/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1406735] Re: package udev 208-8ubuntu8.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 102

[C. Jeffery Small]

Please don't overwrite standard tools like ls

No kidding!  It was not something that I did intentionally -- just that
day's brain-fart.  :-(

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1406735

Title:
  package udev 208-8ubuntu8.1 failed to install/upgrade: subprocess
  installed post-installation script returned error exit status 102

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/sysvinit/+bug/1406735/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1400669] Re: package spamassassin 3.4.0-3ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

[C. Jeffery Small]

Follow-up to my two previous notes.

I discovered a self-made problem with a script on my system that was
causing the invoke-rc.d step of the installation to fail.  This may
explain why the spamassassin postinst script did not run in this
instance.

For more detains on the nature of bug for the udev package, see:
https://bugs.launchpad.net/ubuntu/+source/sysvinit/+bug/1406735

Thus, my report here may be a false flag.  However, the scripting error
that caused the problem was not in place a few weeks ago when my
attempts to install the sendmail package failed with spamassassin.  I
still believe that there may be an underlying problem with this
particular package that seems to be causing many people difficulties.

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to spamassassin in Ubuntu.
https://bugs.launchpad.net/bugs/1400669

Title:
  package spamassassin 3.4.0-3ubuntu1 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/spamassassin/+bug/1400669/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 1400669] Re: package spamassassin 3.4.0-3ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

[C. Jeffery Small]

Follow-up to my two previous notes.

I discovered a self-made problem with a script on my system that was
causing the invoke-rc.d step of the installation to fail.  This may
explain why the spamassassin postinst script did not run in this
instance.

For more detains on the nature of bug for the udev package, see:
https://bugs.launchpad.net/ubuntu/+source/sysvinit/+bug/1406735

Thus, my report here may be a false flag.  However, the scripting error
that caused the problem was not in place a few weeks ago when my
attempts to install the sendmail package failed with spamassassin.  I
still believe that there may be an underlying problem with this
particular package that seems to be causing many people difficulties.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1400669

Title:
  package spamassassin 3.4.0-3ubuntu1 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/spamassassin/+bug/1400669/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1406735] Re: package udev 208-8ubuntu8.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 102

[C. Jeffery Small]

Martin:

I did a lot of additional investigating into the link issue and I
believe I have discovered the problem which was on my end.  For many
years I have have has a bunch of aliases for /bin/ls defined.  For
example:

alias l=/bin/ls -al
alias lx=/bin/ls -FC
alias lt=/bin/ls -AFCt

As aliases, these have never caused any problem.  However, while moving
to this new system, these aliases were converted into a shell script
with a bunch of links.  Unfortunately, one of the links was created as
ls rather than lx and this caused calls to ls to append the type
characters -- in the case of sympolic links, an '@' character.

Looking back at the original messages from above:

+ invoke-rc.d udev restart
invoke-rc.d: not a symlink: /etc/rcS.d/S03udev@
invoke-rc.d: dangling symlink: /etc/rcS.d/S03udev@

I see that the '@' is listed as part of the name.  I missed this
originally because I am so used to seeing that designator in my
listings, but I am pretty sure that the script was taking this as part
of the actual filename and could locate no links by those names.

This failure of invoke-rc.d probably kept the postinst script from
running.  So that solves one problem.

Since manually running the postinst script worked, it probably would
have run successfully had the ls error not occurred.  The udef package
is therefore, probably alright as is.

Sorry to have been the source of the problem and wasted your time on
this, but your input was very helpful in getting it resolved.  I've had
some issues with other package installations which I do not think were
caused by the same ls error, as that new script was only active for a
few days.  I will monitor future updates and see if any pattern emerges,
but for now all is well.

Thanks for all of your help.
--
Jeff Small

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1406735

Title:
  package udev 208-8ubuntu8.1 failed to install/upgrade: subprocess
  installed post-installation script returned error exit status 102

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/sysvinit/+bug/1406735/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 950662] Re: Waiting for network message on bootup when all network devices are up

[C. Jeffery Small]

I would like to second that this problem is active in 14.10.

System:  Custom server with dual Intel Xeon E5-2630 CPU and dual ethernet ports
OS:  Bare metal install of Ubuntu server 14.10 plus xfce4 (xubuntu) desktop

After the OS install, the system has consistently been hanging as
reported above during the boot sequence.

Following the boot message:  Starting configure network device

/etc/init/failsafe.conf displays these messages with the associated two
minute sleeps:

Waiting for network configuration...
Waiting up to 60 more seconds for network configuration...
Booting system without full network configuration...

However, shortly after the original Starting configure network device
message, I am able to ping both network interfaces from a remote
machine.  It appears that although the interfaces are configured and
active, plymouth  remains confused and fails to issue a  successful
return code.  This system was automatically configuring the two
interfaces as p1p1 and p2p1, so I have written an /etc/udev/rules.d/70
-persistent-net.rules file to rename these back to a more respectable
eth0 and eth1.  However, the hanging problem preceded any of this
renaming activity.

This delay is a real pain and appears to affect quite a few people.  It
would be good to pin down the nature of the problem and fix it once and
for all.  This appears to extend back to at least 2011 and can be found
elsewhere under bug-ids 885596 and 881079.

Here are the particulars for my configuration:

-
# cat /etc/network/interfaces
#
auto lo
iface lo inet loopback
#
auto eth0
   iface eth0 inet static
   address 204.107.91.3
   netmask 255.255.255.0
   gateway 204.107.91.254
   dns-nameservers 199.181.164.1 199.181.164.2 68.87.69.146 68.87.85.98
#
auto eth1
iface eth1 inet static
address 204.107.91.4
netmask 255.255.255.0
gateway 204.107.91.254
dns-nameservers 199.181.164.1 199.181.164.2 68.87.69.146 68.87.85.98

-
# ifconfig -a
eth0  Link encap:Ethernet  HWaddr e0:3f:49:e8:1a:31  
  inet addr:204.107.91.3  Bcast:204.107.91.255  Mask:255.255.255.0
  inet6 addr: fe80::e23f:49ff:fee8:1a31/64 Scope:Link
  UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
  RX packets:5704 errors:0 dropped:0 overruns:0 frame:0
  TX packets:4706 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:1000 
  RX bytes:2651217 (2.6 MB)  TX bytes:707849 (707.8 KB)
  Interrupt:16 Memory:b3f0-b3f2 

eth1  Link encap:Ethernet  HWaddr e0:3f:49:e8:1a:32  
  inet addr:204.107.91.4  Bcast:204.107.91.255  Mask:255.255.255.0
  inet6 addr: fe80::e23f:49ff:fee8:1a32/64 Scope:Link
  UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
  RX packets:1117 errors:0 dropped:0 overruns:0 frame:0
  TX packets:125 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:1000 
  RX bytes:140077 (140.0 KB)  TX bytes:14374 (14.3 KB)
  Interrupt:17 Memory:b3e0-b3e2 

loLink encap:Local Loopback  
  inet addr:127.0.0.1  Mask:255.0.0.0
  inet6 addr: ::1/128 Scope:Host
  UP LOOPBACK RUNNING  MTU:65536  Metric:1
  RX packets:13 errors:0 dropped:0 overruns:0 frame:0
  TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:0 
  RX bytes:893 (893.0 B)  TX bytes:893 (893.0 B)

virbr0Link encap:Ethernet  HWaddr 56:ac:3d:07:64:e8  
  inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
  UP BROADCAST MULTICAST  MTU:1500  Metric:1
  RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  collisions:0 txqueuelen:0 
  RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

-
# route
Kernel IP routing table
Destination   Gateway Genmask Flags   Metric   Ref Use 
Iface
defaultrouter 0.0.0.0   UG   0  
  0  0 eth0
link-local * 255.255.0.0   U 1000   
   0  0 eth0
192.168.122.0   * 255.255.255.0   U 0 0 
 0 virbr0
cjsanet *255.255.255.0   U  0   
  0  0 eth0
cjsanet *255.255.255.0   U  0   
  0  0 eth1

-
# cat /etc/udev/rules.d/70-persistent-net.rules

SUBSYSTEM==net, ACTION==add, DRIVERS==?*,
ATTR{address}==e0:3f:49:e8:1a:31, ATTR{dev_id}==0x0,
ATTR{type}==1, NAME=eth0

SUBSYSTEM==net, ACTION==add, DRIVERS==?*,
ATTR{address}==e0:3f:49:e8:1a:32, ATTR{dev_id}==0x0,

[Bug 1400669] Re: package spamassassin 3.4.0-3ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

[C. Jeffery Small]

Follow up to my previous note:

I have been working on a similar installation problem with the udev
package and received some help from Martin Pitt.  Based upon his
suggestions, I ran the following command:

# env DPKG_MAINTSCRIPT_PACKAGE=spamassassin DPKG_MAINTSCRIPT_NAME=postinst sh 
-ex /var/lib/dpkg/info/spamassassin.postinst configure ; echo $?
+ set -e
+ [ configure = triggered ]
+ [ configure = configure ]
+ getent passwd debian-spamd
+ mkdir -p /var/lib/spamassassin
+ stat -c %U /var/lib/spamassassin
+ OWNER=debian-spamd
+ stat -c %G /var/lib/spamassassin
+ GROUP=debian-spamd
+ dpkg-statoverride --list /var/lib/spamassassin/sa-update-keys
+ [ debian-spamd:debian-spamd != debian-spamd:debian-spamd ]
+ test -d /var/lib/spamassassin/sa-update-keys
+ su - debian-spamd -c sa-update --gpghomedir 
/var/lib/spamassassin/sa-update-keys --import 
/usr/share/spamassassin/GPG.KEY
+ deb-systemd-helper debian-installed spamassassin.service
+ deb-systemd-helper unmask spamassassin.service
+ deb-systemd-helper --quiet was-enabled spamassassin.service
+ deb-systemd-helper update-state spamassassin.service
+ [ -x /etc/init.d/spamassassin ]
+ update-rc.d spamassassin defaults 19 21
+ [ -x /etc/init.d/spamassassin ]
+ invoke-rc.d spamassassin start
SpamAssassin Mail Filter Daemon: disabled, see /etc/default/spamassassin
0

OK, that looks promising.  Now, when I returned to synaptic and
installed another unrelated package, it then proceded to configure both
spamassassin and sa-compile!  There must be a flag somewhere that
doesn't get updated when this manual command is run, so the package
manager still thinks it needs to be performed.  In any event, this
appears to have cleared the problems and make the packages as properly
installed.  Unfortunately, I'm still unclear as to the source of the
original problem.

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to spamassassin in Ubuntu.
https://bugs.launchpad.net/bugs/1400669

Title:
  package spamassassin 3.4.0-3ubuntu1 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/spamassassin/+bug/1400669/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 1400669] Re: package spamassassin 3.4.0-3ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

[C. Jeffery Small]

Note:  There seem to be multiple active  bug reports regarding this
problem, including one previously submitted by me.  These might need to
all be merged together.

OS: xubuntu 14.10
Error occurred when installing the evolution packages using synaptic.

In my case the error message are as follows:

Spamassassin subprocess post-install script returned error status 102
sa-compile dependency problems -- leaving unconfigured.

Note the exit status of 102 differs from the one reported by the
original reporter.

This is the second time that spamassassin has screwed up my system.  The
previous time was when I attempted to install sendmail.  The package
database got so screwed up that I had to wipe the system and do a
complete reinstall.  After that fresh install, I encountered a similar
problem with the udev package which is currently active as bug 1406735.

https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1406735

Eventually, rerunning the udev post-install script manually seemed to
clear that problem.  Then, as I reinstalled old software packages I ran
back into this.  From experience, I know that until this error is
cleared, any further attempt to install packages will just lead to
further corruptions.   The last time this happend to me, I was unable to
remove certain packages or install other new ones due to the package
database errors that proliferated.

This is a serious problem that needs immediate investigation.

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to spamassassin in Ubuntu.
https://bugs.launchpad.net/bugs/1400669

Title:
  package spamassassin 3.4.0-3ubuntu1 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/spamassassin/+bug/1400669/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 1400669] Re: package spamassassin 3.4.0-3ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

[C. Jeffery Small]

Note:  There seem to be multiple active  bug reports regarding this
problem, including one previously submitted by me.  These might need to
all be merged together.

OS: xubuntu 14.10
Error occurred when installing the evolution packages using synaptic.

In my case the error message are as follows:

Spamassassin subprocess post-install script returned error status 102
sa-compile dependency problems -- leaving unconfigured.

Note the exit status of 102 differs from the one reported by the
original reporter.

This is the second time that spamassassin has screwed up my system.  The
previous time was when I attempted to install sendmail.  The package
database got so screwed up that I had to wipe the system and do a
complete reinstall.  After that fresh install, I encountered a similar
problem with the udev package which is currently active as bug 1406735.

https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1406735

Eventually, rerunning the udev post-install script manually seemed to
clear that problem.  Then, as I reinstalled old software packages I ran
back into this.  From experience, I know that until this error is
cleared, any further attempt to install packages will just lead to
further corruptions.   The last time this happend to me, I was unable to
remove certain packages or install other new ones due to the package
database errors that proliferated.

This is a serious problem that needs immediate investigation.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1400669

Title:
  package spamassassin 3.4.0-3ubuntu1 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/spamassassin/+bug/1400669/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1406735] Re: package udev 208-8ubuntu8.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 102

[C. Jeffery Small]

Martin:

The previous invocation of /var/lib/dpkg/info/udev.postinst configure
seems to have cleared the problem so I didn't rerun this command.
However, I was installing other packages and while installing evolution,
ran into my old nemisis: spamassassin which failed in a similar manner,
creating dependency problems dor sa-compile.  So I tried your suggestion
on that package and got this result:

# env DPKG_MAINTSCRIPT_PACKAGE=spamassassin DPKG_MAINTSCRIPT_NAME=postinst sh 
-ex /var/lib/dpkg/info/spamassassin.postinst configure ; echo $?
+ set -e
+ [ configure = triggered ]
+ [ configure = configure ]
+ getent passwd debian-spamd
+ mkdir -p /var/lib/spamassassin
+ stat -c %U /var/lib/spamassassin
+ OWNER=debian-spamd
+ stat -c %G /var/lib/spamassassin
+ GROUP=debian-spamd
+ dpkg-statoverride --list /var/lib/spamassassin/sa-update-keys
+ [ debian-spamd:debian-spamd != debian-spamd:debian-spamd ]
+ test -d /var/lib/spamassassin/sa-update-keys
+ su - debian-spamd -c sa-update --gpghomedir 
/var/lib/spamassassin/sa-update-keys --import 
/usr/share/spamassassin/GPG.KEY
+ deb-systemd-helper debian-installed spamassassin.service
+ deb-systemd-helper unmask spamassassin.service
+ deb-systemd-helper --quiet was-enabled spamassassin.service
+ deb-systemd-helper update-state spamassassin.service
+ [ -x /etc/init.d/spamassassin ]
+ update-rc.d spamassassin defaults 19 21
+ [ -x /etc/init.d/spamassassin ]
+ invoke-rc.d spamassassin start
SpamAssassin Mail Filter Daemon: disabled, see /etc/default/spamassassin
0

OK, that looks promising.  When I returned to synaptic and installed
another unrelated package, it then proceded to configure both
spamassassin and sa-compile!  There must be a flag somewhere that
doesn't get updated when the manual command is run, so the package
manager still thinks it needs to be performed.

In any event, I have apparently managed to get the udev and spamassassin
packages into a stable state and new packages are installing as expected
once again.  Please let me know if you would like any additional
information.  And thank you greatly for your guick and very useful help.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1406735

Title:
  package udev 208-8ubuntu8.1 failed to install/upgrade: subprocess
  installed post-installation script returned error exit status 102

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1406735/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1400669] Re: package spamassassin 3.4.0-3ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 1

[C. Jeffery Small]

Follow up to my previous note:

I have been working on a similar installation problem with the udev
package and received some help from Martin Pitt.  Based upon his
suggestions, I ran the following command:

# env DPKG_MAINTSCRIPT_PACKAGE=spamassassin DPKG_MAINTSCRIPT_NAME=postinst sh 
-ex /var/lib/dpkg/info/spamassassin.postinst configure ; echo $?
+ set -e
+ [ configure = triggered ]
+ [ configure = configure ]
+ getent passwd debian-spamd
+ mkdir -p /var/lib/spamassassin
+ stat -c %U /var/lib/spamassassin
+ OWNER=debian-spamd
+ stat -c %G /var/lib/spamassassin
+ GROUP=debian-spamd
+ dpkg-statoverride --list /var/lib/spamassassin/sa-update-keys
+ [ debian-spamd:debian-spamd != debian-spamd:debian-spamd ]
+ test -d /var/lib/spamassassin/sa-update-keys
+ su - debian-spamd -c sa-update --gpghomedir 
/var/lib/spamassassin/sa-update-keys --import 
/usr/share/spamassassin/GPG.KEY
+ deb-systemd-helper debian-installed spamassassin.service
+ deb-systemd-helper unmask spamassassin.service
+ deb-systemd-helper --quiet was-enabled spamassassin.service
+ deb-systemd-helper update-state spamassassin.service
+ [ -x /etc/init.d/spamassassin ]
+ update-rc.d spamassassin defaults 19 21
+ [ -x /etc/init.d/spamassassin ]
+ invoke-rc.d spamassassin start
SpamAssassin Mail Filter Daemon: disabled, see /etc/default/spamassassin
0

OK, that looks promising.  Now, when I returned to synaptic and
installed another unrelated package, it then proceded to configure both
spamassassin and sa-compile!  There must be a flag somewhere that
doesn't get updated when this manual command is run, so the package
manager still thinks it needs to be performed.  In any event, this
appears to have cleared the problems and make the packages as properly
installed.  Unfortunately, I'm still unclear as to the source of the
original problem.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1400669

Title:
  package spamassassin 3.4.0-3ubuntu1 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 1

To manage notifications about this bug go to:
https://bugs.launchpad.net/spamassassin/+bug/1400669/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1406735] [NEW] package udev 208-8ubuntu8.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 102

[C. Jeffery Small]

Public bug reported:

A few weeks ago I installed Ubuntu 10.10 server with the addition of the
xubuntu-desktop packages.  Everything started out alright until i tried
to install sendmail in place of postfix.  That installaton failed,
reporting a similar error:

subprocess installed post-installation script returned error exit
status 102

From there, things went from bad to worse.  I was now unable to finish
the install of sendmail nor could I remove it fully and reinstall
postfix.  Spamassassin seemed to be one critical package that hept
reporting errors.  As I tried to install or remove packages using
synaptic, the system most of the time refused to act due to dascading
errors and partially removed packages that could not be removed, even by
force.

Today I threw up my hands and did a complete fresh install of the
system.  Everything went well for the basic packages until I ran
software updater.  A few packages were scheduled to be updated,
including udev and it has now faild in the exact same manner.

Could someone look at this and provide a quick reply as to what can be
done to rectify this situation.  I am afraid to install or remove any
other software for fear of corrupting the system further and I currently
do not have a usable system.

Let me know if additional information is required.  Thanks.

ProblemType: Package
DistroRelease: Ubuntu 14.10
Package: udev 208-8ubuntu8.1
ProcVersionSignature: Ubuntu 3.16.0-28.38-generic 3.16.7-ckt1
Uname: Linux 3.16.0-28-generic x86_64
ApportVersion: 2.14.7-0ubuntu8
Architecture: amd64
CustomUdevRuleFiles: .70-persistent-net.rules
Date: Wed Dec 31 01:40:11 2014
DuplicateSignature: package:udev:208-8ubuntu8.1:subprocess installed 
post-installation script returned error exit status 102
ErrorMessage: subprocess installed post-installation script returned error exit 
status 102
InstallationDate: Installed on 2014-12-31 (0 days ago)
InstallationMedia: Ubuntu-Server 14.10 Utopic Unicorn - Release amd64 
(20141022.2)
MachineType: ASUSTeK COMPUTER INC. Z9PE-D8 WS
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.16.0-28-generic 
root=UUID=d7121d57-8cf9-42a5-b7c3-75f414ce3e09 ro nomdmonddf nomdmonisw
SourcePackage: systemd
Title: package udev 208-8ubuntu8.1 failed to install/upgrade: subprocess 
installed post-installation script returned error exit status 102
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 05/06/2014
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 5503
dmi.board.asset.tag: To be filled by O.E.M.
dmi.board.name: Z9PE-D8 WS
dmi.board.vendor: ASUSTeK COMPUTER INC.
dmi.board.version: 1.0x
dmi.chassis.asset.tag: To Be Filled By O.E.M.
dmi.chassis.type: 17
dmi.chassis.vendor: To Be Filled By O.E.M.
dmi.chassis.version: To Be Filled By O.E.M.
dmi.modalias: 
dmi:bvnAmericanMegatrendsInc.:bvr5503:bd05/06/2014:svnASUSTeKCOMPUTERINC.:pnZ9PE-D8WS:pvr1.0x:rvnASUSTeKCOMPUTERINC.:rnZ9PE-D8WS:rvr1.0x:cvnToBeFilledByO.E.M.:ct17:cvrToBeFilledByO.E.M.:
dmi.product.name: Z9PE-D8 WS
dmi.product.version: 1.0x
dmi.sys.vendor: ASUSTeK COMPUTER INC.

** Affects: systemd (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package utopic

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1406735

Title:
  package udev 208-8ubuntu8.1 failed to install/upgrade: subprocess
  installed post-installation script returned error exit status 102

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1406735/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1406735] Re: package udev 208-8ubuntu8.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 102

[C. Jeffery Small]

As a test, I tried installing the Chrome browser packages.  Here is what
is reported by synaptic:

E: udev: subprocess installed post-installation script returned error exit 
status 102
E: systemd: dependency problems - leaving unconfigured
E: libpam-systemd: 41.3793:dependency problems - leaving unconfigured

History indicates that this problem will continue to grow as additional 
packages are infected down the road.


Martin: Here is the output that you requested:

# sh -ex /var/lib/dpkg/info/udev.postinst configure
+ set -e
+ update_hwdb
+ udevadm hwdb --update
+ chrooted
+ stat -c %d/%i /
+ stat -Lc %d/%i /proc/1/root
+ [ 2304/2 = 2304/2 ]
+ return 1
+ in_debootstrap
+ [ -d /debootstrap/ ]
+ return 1
+ invoke-rc.d udev restart
invoke-rc.d: not a symlink: /etc/rcS.d/S03udev@
invoke-rc.d: dangling symlink: /etc/rcS.d/S03udev@

# cd /etc/rcS.d ; ls -l S03udev
lrwxrwxrwx 1 root root 14 Dec 30 21:58 S03udev - ../init.d/udev

# ls -lL S03udev
-rwxr-xr-x 1 root root 6583 Oct  7 03:16 S03udev

# ls -l ../init.d/udev
-rwxr-xr-x 1 root root 6583 Oct  7 03:16 ../init.d/udev

# invoke-rc.d udev restart; echo $?
udev stop/waiting
udev start/running, process 11619
0

There is no policy-rc.d file or directory on this system.  locate(1) shows only 
the following:

# locate policy-rc.d
/usr/share/doc/sysv-rc/README.policy-rc.d.gz
-

I hope this info helps.  Please let me know if I can provide anything
else.   Regards.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1406735

Title:
  package udev 208-8ubuntu8.1 failed to install/upgrade: subprocess
  installed post-installation script returned error exit status 102

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1406735/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1406735] Re: package udev 208-8ubuntu8.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 102

[C. Jeffery Small]

Follow up:

I was curious to see what the exit status of the udev.postinst command
was, so I ran it again and here is what happened this time!

 -
# sh -ex /var/lib/dpkg/info/udev.postinst configure ; echo $?
+ set -e
+ update_hwdb
+ udevadm hwdb --update
+ chrooted
+ stat -c %d/%i /
+ stat -Lc %d/%i /proc/1/root
+ [ 2304/2 = 2304/2 ]
+ return 1
+ in_debootstrap
+ [ -d /debootstrap/ ]
+ return 1
+ invoke-rc.d udev restart
udev stop/waiting
udev start/running, process 11860
+ update-initramfs -u
update-initramfs: Generating /boot/initrd.img-3.16.0-28-generic
W: mdadm: the array /dev/md/dymaxion:x with UUID 
c052a4db:6908e47c:8f2cac48:2b6c1305
W: mdadm: is currently active, but it is not listed in mdadm.conf. if
W: mdadm: it is needed for boot, then YOUR SYSTEM IS NOW UNBOOTABLE!
W: mdadm: please inspect the output of /usr/share/mdadm/mkconf, compare
W: mdadm: it to /etc/mdadm/mdadm.conf, and make the necessary changes.
+ [ -x /etc/init.d/udev ]
+ update-rc.d udev defaults
+ [ -x /etc/init.d/udev-finish ]
+ update-rc.d udev-finish defaults
+ [ -x /etc/init.d/udevtrigger ]
+ [ -x /etc/init.d/udevmonitor ]
+ [ -x /etc/init.d/udev-fallback-graphics ]
+ [ -x /etc/init.d/lvm2 ]
+ update-rc.d lvm2 defaults
+ dpkg-maintscript-helper rm_conffile /etc/init.d/udev-mtab 204-1~ -- configure
dpkg-maintscript-helper: error: couldn't identify the package
1
 -

So what's up with that?  I did nothing to the system between invocations
other than run the invoke-rc.d udev restart; echo $? command.

Now, I appear to have another problem in that mdadm has now been
excluded from the boot file.  The root filesystem is indeed mirrored, so
I must rebuild this with mdadm.  This is a procedure that i am
unfamiliar with.  I will research it.  However, if you can suggest the
proper steps to take, that would be appreciated.  Thanks.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1406735

Title:
  package udev 208-8ubuntu8.1 failed to install/upgrade: subprocess
  installed post-installation script returned error exit status 102

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1406735/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1406735] Re: package udev 208-8ubuntu8.1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 102

[C. Jeffery Small]

PPS:

OK, I misunderstood the messages regarding mdadm.  It is complaning
about an array that is NOT related to booting, but gets mounted through
fstab.  At first I though that it was implying that the
/etc/mdadm/mdadm.conf file was corrupted and that support for mdadm had
been eliminated from /boot/initrd.img-3.16.0-28-generic.  The root and
swap  arrays are properly defined, so all is well.  I'll add the
additional array to mdadm.conf for completeness.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1406735

Title:
  package udev 208-8ubuntu8.1 failed to install/upgrade: subprocess
  installed post-installation script returned error exit status 102

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1406735/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1400025] [NEW] package ebtables 2.0.10.4-3ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 102

[C. Jeffery Small]

Public bug reported:

As i attempt to install packages on this system, there seems to be a
cascading set of post-install script errors extending back to the
spamassassin install problem.

ProblemType: Package
DistroRelease: Ubuntu 14.10
Package: ebtables 2.0.10.4-3ubuntu1
ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7
Uname: Linux 3.16.0-25-generic x86_64
ApportVersion: 2.14.7-0ubuntu8
Architecture: amd64
Date: Sat Dec  6 22:03:53 2014
DuplicateSignature: package:ebtables:2.0.10.4-3ubuntu1:subprocess installed 
post-installation script returned error exit status 102
ErrorMessage: subprocess installed post-installation script returned error exit 
status 102
InstallationDate: Installed on 2014-12-05 (1 days ago)
InstallationMedia: Ubuntu-Server 14.10 Utopic Unicorn - Release amd64 
(20141022.2)
SourcePackage: ebtables
Title: package ebtables 2.0.10.4-3ubuntu1 failed to install/upgrade: subprocess 
installed post-installation script returned error exit status 102
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: ebtables (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package utopic

-- 
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to ebtables in Ubuntu.
https://bugs.launchpad.net/bugs/1400025

Title:
  package ebtables 2.0.10.4-3ubuntu1 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 102

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ebtables/+bug/1400025/+subscriptions

-- 
Ubuntu-server-bugs mailing list
Ubuntu-server-bugs@lists.ubuntu.com
Modify settings or unsubscribe at: 
https://lists.ubuntu.com/mailman/listinfo/ubuntu-server-bugs

[Bug 1400025] [NEW] package ebtables 2.0.10.4-3ubuntu1 failed to install/upgrade: subprocess installed post-installation script returned error exit status 102

[C. Jeffery Small]

Public bug reported:

As i attempt to install packages on this system, there seems to be a
cascading set of post-install script errors extending back to the
spamassassin install problem.

ProblemType: Package
DistroRelease: Ubuntu 14.10
Package: ebtables 2.0.10.4-3ubuntu1
ProcVersionSignature: Ubuntu 3.16.0-25.33-generic 3.16.7
Uname: Linux 3.16.0-25-generic x86_64
ApportVersion: 2.14.7-0ubuntu8
Architecture: amd64
Date: Sat Dec  6 22:03:53 2014
DuplicateSignature: package:ebtables:2.0.10.4-3ubuntu1:subprocess installed 
post-installation script returned error exit status 102
ErrorMessage: subprocess installed post-installation script returned error exit 
status 102
InstallationDate: Installed on 2014-12-05 (1 days ago)
InstallationMedia: Ubuntu-Server 14.10 Utopic Unicorn - Release amd64 
(20141022.2)
SourcePackage: ebtables
Title: package ebtables 2.0.10.4-3ubuntu1 failed to install/upgrade: subprocess 
installed post-installation script returned error exit status 102
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: ebtables (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-package utopic

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1400025

Title:
  package ebtables 2.0.10.4-3ubuntu1 failed to install/upgrade:
  subprocess installed post-installation script returned error exit
  status 102

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ebtables/+bug/1400025/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1384381] [NEW] Would like to see color profile option added

[C. Jeffery Small]

Public bug reported:

This is an enhancement request.

Xubuntu 14.04.1
xfce4-terminal 0.6.3

I would like to see the ability to adjust the background and text colors
be made available on a window-by-window basis.  The ability to display
terminal windows with different color schemes is often useful.

This could be done with commandline options similar to xterm (-bg, -fg,
-cr, -hc, etc) or through saved color profiles which could we set on the
commandline or selected from the terminal menu, as is done with gnome-
terminal.  xfce4-terminal operates from these other emulators in certain
ways which makes replacing it with one of the other programs
undesirable.  Adding this color management featire would be the best
solution.

** Affects: xfce4-terminal (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1384381

Title:
  Would like to see color profile option added

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfce4-terminal/+bug/1384381/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1244629] Re: SRU xfce4-weather-plugin, currently showing 'No Data'

[C. Jeffery Small]

Also looking forward to a properly functioning release for Ubuntu
14.04.1.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1244629

Title:
  SRU xfce4-weather-plugin, currently showing 'No Data'

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xfce4-weather-plugin/+bug/1244629/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1377795] [NEW] Some games in ace-of-penguins fail to display window decorations

[C. Jeffery Small]

Public bug reported:

ace-of-penguins Version: 1.4-0ubuntu2
Xubuntu: 14.04.1
xfce4: 4.10.1

ace-freecell, solitare, thornq and spider work properly

ace-canfield, golf, mastermind, merlin, minesweaper, pegged, taipedit
and taipei all start and run, but fail to display window border and
decorations.  See attached screen image.

** Affects: ace-of-penguins (Ubuntu)
 Importance: Undecided
 Status: New

** Attachment added: canfield.png
   
https://bugs.launchpad.net/bugs/1377795/+attachment/4226120/+files/canfield.png

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1377795

Title:
  Some games in ace-of-penguins fail to display window decorations

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ace-of-penguins/+bug/1377795/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1365847] Re: Firefox audio problem with flash plugin

[C. Jeffery Small]

Here is some additional information relating to this issue.

As best as I can tell, the Opera browser (ver. 12.16) is using the same
plugins as Firefox (32).  When I visit the following page:

http://flash.flowplayer.org/plugins/flash/content.html

Opera produces audio output with this video while Firefox does not.
Opera also seems to properly produce audio in flash youtube videos in
flash mode while Firefox cannot -- although if the FF flash plugin is
disabled, youtube videos will fall over to HTML5 mode and then audio is
produced.  Chromium works well in all situations with it's own Flash
11.2.r999 plugin.

The following site:

http://www.radioio.com/channels/jazz/real-jazz/play/?play

is a streaming radio channel that has worked well in the past.  It
currently plays with Firefox 31 on my Solaris system and Firefox 32 on
Windows XP.  It also plays fine using the Ubuntu Chromium browser.
However, it fails to load (i.e. connect) to the stream on both Firefox
and Opera.  I include this in the hope that it offers additional clues
as to what is wrong here.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1365847

Title:
  Firefox audio problem with flash plugin

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/flashplugin-nonfree/+bug/1365847/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1367492] [NEW] Suggested addition to the mdadm(8) manual page

[C. Jeffery Small]

Public bug reported:

The mdadm(8) manual page:

http://manpages.ubuntu.com/manpages/trusty/man8/mdadm.8.html

does not explicitly mention the optional --manage and --misc mode
options.  However, the official Linux Raid Wiki:

https://raid.wiki.kernel.org/index.php/Linux_Raid

does refer to these in some examples.  This caused some confusion until
I ran strings on the mdadm binary and saw that both of these were
mentioned in the internal help.

This is a minor point, but one which I believe should be rectified to
avoid ambiguity in the documentation of this command.

** Affects: ubuntu
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1367492

Title:
  Suggested addition to the mdadm(8) manual page

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+bug/1367492/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1365847] Re: Firefox audio problem with flash plugin

[C. Jeffery Small]

I hope someone will review this and treat it as a serious bug!

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1365847

Title:
  Firefox audio problem with flash plugin

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/flashplugin-nonfree/+bug/1365847/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1365847] [NEW] Firefox audio problem with flash plugin

[C. Jeffery Small]

Public bug reported:

Xeon E5 64 bit system
Xubuntu 14.04.1
Firefox 32.0+build1-0ubuntu0.14.04.1
flashplugin-installer 11.2.202.400ubuntu0.14.04.1

Audio plays properly on this system through all media players as well as
the Chrome and Opera browsers.  However, no sound was issuing from the
Firefox 31 or 32 browsrs regardless of what video or audio source was
selected.  After considerable work and a joint investigation with a
Mozilla developer:

see:  https://bugzilla.mozilla.org/show_bug.cgi?id=1062556

it was determined that the proble was with the Shockwave Flash plugin.
When this plugin was disabled, sources such as youtube would see that
flash support was unavailable and resort to HTML5 which plays audio just
fine.  However, disabling the flash plugin means that all flash content
is unavailable -- both video and audio.

This plugin interface needs to be investigated and repaired so that
audio support can be restored.

** Affects: mdadm (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1365847

Title:
  Firefox audio problem with flash plugin

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mdadm/+bug/1365847/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1365847] Re: Firefox audio problem with flash plugin

[C. Jeffery Small]

Somehow this got tagged for the mdadm package although I know that I set
it properly.  I'm updating the target package to the flash plugin.

** Package changed: mdadm (Ubuntu) = flashplugin-nonfree (Ubuntu)

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1365847

Title:
  Firefox audio problem with flash plugin

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/flashplugin-nonfree/+bug/1365847/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1160569]

[C. Jeffery Small]

Xubuntu 14.04.1

Every time I attempt to run the apport-bug bug reporting command, it
tries to load data into an instance of firefox [30, 31, 32] which
repeatedly fails with Firefox reporting:

--
File not found
Firefox cannot find the file at current working dir 
path/https://bugs.launchpad.net/ubuntu/+source/apport/+filebug/long_id_string
--

In the terminal window where the command is launched, I get the
following:

--
% apport-bug package

** (apport-gtk:13523): WARNING **: Couldn't connect to accessibility
bus: Failed to connect to socket /tmp/dbus-t4rIGS23K1: Connection
refused

(process:13996): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size 
== 0' failed
--

The first warning is a ubuntu bug.  The second is apparently issued by
Firefox and is likely responsible for the command failing.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1160569

Title:
  [regression] GLib-CRITICAL **: g_slice_set_config: assertion
  `sys_page_size == 0' failed

To manage notifications about this bug go to:
https://bugs.launchpad.net/firefox/+bug/1160569/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1365141] [NEW] Documentaton error in mdadm (and related ?) packages

[C. Jeffery Small]

Public bug reported:

The mdadm(8), md(4), and possible other manual pages reference mkraid(8)
in the SEE ALSO section.  However, these links at least in the trusty
hierarchy, are broken.  Synaptic, cmd and locate do not report the
existence of the mkraid command.  If this command does not exist, all
references in the documentation should be removed.

** Affects: mdadm (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1365141

Title:
  Documentaton error in mdadm (and related ?) packages

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mdadm/+bug/1365141/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1365158] [NEW] apport-bug repeatedly fails

[C. Jeffery Small]

Public bug reported:

When running apport-bug as either root or as a regular user, it always
fails as follows:

* I type apport-bug package_name

* System data is collected and displayed in a pop-up window.  I
continue.

* The browser (firefox) is displayed with an error:

---
File not found
Firefox cannot find the file at current working dir 
path/https://bugs.launchpad.net/ubuntu/+source/apport/+filebug/long_id_string
---

In the terminal window where the command was initiated, the following is
displayed:

---
% bug apport

** (apport-gtk:13523): WARNING **: Couldn't connect to accessibility
bus: Failed to connect to socket /tmp/dbus-t4rIGS23K1: Connection
refused

(process:13996): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size 
== 0' failed
---

The first warning may be related to this long standing bug:
https://bugs.launchpad.net/ubuntu/+bug/1061554

The second appears to be a Firefox bug as reported here;
https://bugzilla.mozilla.org/show_bug.cgi?id=833117

Could the Firefox bug be responsible for the failues of apport-bug?

** Affects: mdadm (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1365158

Title:
  apport-bug repeatedly fails

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/mdadm/+bug/1365158/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1193236] Re: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-*

[C. Jeffery Small]

I would like to also confir this bug in a 14.04.1 system.  I would live
to report this using apport-bug but it is that very command that is
failing!  Here is the terminal output seen when attempting to run this
commad:


3- apport-bug smbclient

** (apport-gtk:7235): WARNING **: Couldn't connect to accessibility bus: Failed 
to connect to socket /tmp/dbus-J9CVMJHXEs: Connection refused
4- 
(process:7727): GLib-CRITICAL **: g_slice_set_config: assertion 'sys_page_size 
== 0' failed

(firefox:7727): GLib-GObject-WARNING **: Attempt to add property
GnomeProgram::sm-connect after class was initialised

(firefox:7727): GLib-GObject-WARNING **: Attempt to add property
GnomeProgram::show-crash-dialog after class was initialised

(firefox:7727): GLib-GObject-WARNING **: Attempt to add property
GnomeProgram::display after class was initialised

(firefox:7727): GLib-GObject-WARNING **: Attempt to add property 
GnomeProgram::default-icon after class was initialised


After answering various question and getting to the place where it is
supposed to write the html file, the browser reports that the file is
unavailable (i.e., doesn't exist).

I have used apport-bug a couple of times in the past.  This just started
today.  I rebotted the machine and the problem persisted.

Any known workaround would be appreciated.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1193236

Title:
   Couldn't connect to accessibility bus: Failed to connect to socket
  /tmp/dbus-*

To manage notifications about this bug go to:
https://bugs.launchpad.net/at-spi/+bug/1193236/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1362963] [NEW] findsmb command is missing from smbclient package

[C. Jeffery Small]

Public bug reported:

[Note: I cannot report this using apport-bug as that command is
currently failing on this system.]

The findsmb command is missing from the package:  smbclient 2.4.1.6
+dfsg-1ubuntu2.14.04.3

Note that the manual page is included, but the command itself is
missing.

There is also some confusing regarding the documentation.  Here is the
manpage for the trusty distribution:

http://manpages.ubuntu.com/manpages/trusty/man1/findsmb.1.html

Notice that it indicates that this command is included in  
smbclient_4.1.3+dfsg-2ubuntu5_i386
Is this correct notation?  Are the 64-bit packages not documented, or is this 
another bug?

The findsmb command is supposed to be a perl script so it should really be 
package independent.
Can the file be downloaded from some location?

** Affects: at-spi2-core (Ubuntu)
 Importance: Undecided
 Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1362963

Title:
  findsmb command is missing from smbclient package

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/at-spi2-core/+bug/1362963/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1361478] [NEW] Packaging dependency error for checkbox-gui

[C. Jeffery Small]

Public bug reported:

After a fresh install of 14.04.1, attempts to start checkbox-gui failed
with:

checkbox-gui: error while loading shared libraries: libQt5Xml.so.5:
cannot open shared object file: No such file or directory

A reload of the checkbox-gui package did not improve the situation.
After manually loading the libqt5xml5 package, the utility started.
This appears to be a missing library dependency for this package.

% lsb_release -rd
Description:Ubuntu 14.04.1 LTS
Release:14.04

% apt-cache policy checkbox-gui
checkbox-gui:
  Installed: 0.17.6-0ubuntu6
  Candidate: 0.17.6-0ubuntu6
  Version table:
 *** 0.17.6-0ubuntu6 0
500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages
100 /var/lib/dpkg/status

% apt-cache policy libqt5xml5  
libqt5xml5:
  Installed: 5.2.1+dfsg-1ubuntu14.2
  Candidate: 5.2.1+dfsg-1ubuntu14.2
  Version table:
 *** 5.2.1+dfsg-1ubuntu14.2 0
500 http://us.archive.ubuntu.com/ubuntu/ trusty-updates/main amd64 
Packages
100 /var/lib/dpkg/status
 5.2.1+dfsg-1ubuntu14 0
500 http://us.archive.ubuntu.com/ubuntu/ trusty/main amd64 Packages

ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: checkbox-gui 0.17.6-0ubuntu6
ProcVersionSignature: Ubuntu 3.13.0-34.60-generic 3.13.11.4
Uname: Linux 3.13.0-34-generic x86_64
NonfreeKernelModules: nvidia
ApportVersion: 2.14.1-0ubuntu3.3
Architecture: amd64
CurrentDesktop: XFCE
Date: Mon Aug 25 20:35:30 2014
InstallationDate: Installed on 2014-08-19 (7 days ago)
InstallationMedia: Xubuntu 14.04.1 LTS Trusty Tahr - Release amd64 (20140723)
SourcePackage: checkbox
UpgradeStatus: No upgrade log present (probably fresh install)

** Affects: checkbox (Ubuntu)
 Importance: Undecided
 Status: New


** Tags: amd64 apport-bug trusty

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1361478

Title:
  Packaging dependency error for checkbox-gui

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/checkbox/+bug/1361478/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

[Bug 1360756] Re: The URI ‘help:ubuntu-help/index’ does not point to a valid page.

[C. Jeffery Small]

I also have this problem.  I recently installed 14.04.1 on a new Xeon
system and did not see this for a few days.  However, as I have done
system configuration, I now find that every time I log in, I get a pop-
up window with a title Document Not Found and the above message at the
content.  The yelp package is installed, but I didn't do this manually.
I assume it was part of the initial installation or else was installed
as a dependency by some other package that I installed.

When I select help from the pull-down menu, it accesses the following
url without problem:

file:///usr/share/xubuntu-docs/about/xubuntu-index.html

When I search the filesystem for ubuntu-help/index, the only hits are:

/usr/share/help-langpack/en_AU/ubuntu-help/index.page
/usr/share/help-langpack/en_CA/ubuntu-help/index.page
/usr/share/help-langpack/en_GB/ubuntu-help/index.page


Solving the problem would be great.  As a workaround, stopping the pop-up at 
login would be nice.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1360756

Title:
  The URI ‘help:ubuntu-help/index’ does not point to a valid page.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/yelp/+bug/1360756/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs