Re comment 23, Thank you Steve.
Yes, from what you say of changes made i agree the problem this end will
be solved. So i will have another go at installing 18.04 but will wait
till 18.04.1 And i will have a go at UEFI boot and to enrol the
broadcom-sta-dkms module that you say is possible. A
I have this problem to and my setup is a bit different and i do not see
a similar setup mentioned here.
My disc is GPT partitioned, UEFI is disabled and i boot/install in BIOS
mode but Ubuntu (Lubuntu) is the only OS installed. That is because off
a BCM4312 wireless chip which i need compile a
I would like to confirm bug exactly as first posted. Affecting Lubuntu
10.10 AND now 11.04.
nm-applet will connect my Huawei E1750 modem on the UK 3 3g network.
I live on a boat on the UK inland waterways and am mobile.
If i suffer a dissconnection due to a weak signal nm-applet will not
I wont say much other than this bug affects me to. Details as reported
by others. LUbuntu 10.10. Best Wishes, Chris
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/646293
Title:
usb connected cd/dvd
@Matt, Thanks, I will try it out prob late tomorrow.
--
ubiquity partition step does not show some hard drives
https://bugs.launchpad.net/bugs/459054
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Same here. Ubiquity during manual partitioning master hard drive is not
seen at all and slave hard disc is referenced as sda. Installing anyway
and the system will not boot, grub comes up with error 15.
I rebooted into Karmic live CD and then Hardy live CD and ran cfdisk and
gparted from both.
reply to comment#2
Regret unable to further test this. I have changed distro's to Arch. I
seem to remember never getting over this problem until resorting to re-
install an earlier version of Ubuntu, probably an LTS.
Best Wishes.
--
Metacity will not maximise over whole screen depth.
Public bug reported:
Binary package hint: gnome-applets
This is wish list.
Any chance of also being able to configure the gnome panel
clock,calendar and weather applet as follows;
On a separate movable window that will be shown on the desktop by default when
just booted up,but under other
Public bug reported:
Cycling through minimise,un-maximise and maximise buttons the metacity
window falls short of the available screen depth.Dragging the window to
increase depth has no permanent affect either.
Workaround is to change the screen resolution and then back to what
was.This fixes
** Attachment added: screenshot.png
http://launchpadlibrarian.net/21789740/screenshot.png
--
Metacity will not maximise over whole screen depth.
https://bugs.launchpad.net/bugs/323004
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Unable to submit crash report there isn't one.
Reinstalled GDM which fixed problem here until reboot when it returns,still get
'CRITICAL: Error...' if sudo gdmsetup run from terminal.
Any amend to gdm from gdmsetup also produces a slow shutdown and 'LIBHAL
shutdown failed' error message.This
On Fri, 2008-03-28 at 03:05 +, Nattgew wrote:
Could you run
sudo gdmsetup
and attach the output?
Hi,don't know how to take output of gnome terminal but would like to
know if you have time to explain.However the output of terminal is
exactly;
gdmsetup[6151]: CRITICAL: Error opening file:
** Attachment added: syslog
http://launchpadlibrarian.net/12935228/syslog
--
GDM crashes if you try change the login window.
https://bugs.launchpad.net/bugs/208073
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
Public bug reported:
Binary package hint: gdm
Attempting to change the login window from SystemsAdministration as
soon as the password is entered the GDM setup gui does not appear and
GDM goes into a loop.Attached syslog at 01.06.11 shows 'message repeated
2685 time and segfault'.Hardy Heron
updated the ati video driver to xserver-xorg-video-ati_6.7.195 which has
fixed the problem.now g-s-m process screen is stable in whatever screen
resolution used.
--
gnome-system-monitor when run as user has display problems on process
tab.screen flashes on/off whenever the mouse cursor is on
noticed the gnome-system-monitor update today but problem remains.as
soon as change screen resolution to 832x624 the process screen in g-s-m
is flashing on/off.attached screenshot.fix is to change to 1024x768.
** Attachment added: screenshot gnome-system-monitor process screen
I get same behaviour if i try to burn an iso image.i.e burning the Gutsy
iso from Fiesty produced an unusable disc,would not boot,disc is
unreadable,approx 680MB of unintelligible used disc space.The downloaded
iso was o.k.
--
Copy Disc burns audio disc as data dics
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/10057813/Dependencies.txt
** Attachment added: ProcMaps.txt
http://launchpadlibrarian.net/10057814/ProcMaps.txt
** Attachment added: ProcStatus.txt
http://launchpadlibrarian.net/10057815/ProcStatus.txt
--
Public bug reported:
Binary package hint: gnome-system-monitor
Gutsy Gibbon RC1,g-s-m 2.20,also system-monitor screen size is oversize
and window top panel does not show when quit must use monitor link -top
left tab- and quit.Always repeatable as user.Not a problem if sudo
Hi Pedro,
Further to my last email;
changed screen resolution and started GSM,same problem,it has returned,
process screen flashing on/off.Took screenshot which is now attached.
quit GSM from monitor tab as no window border again.
since then tried different resolutions and turning visual
Hi Pedro,
Received your email and did the following ,
started Gnome System Monitor and checked the process tab,display
flashing on and off whenever the mouse cursor is over the process
screen.i.e same as previous.closed off GSM.
turned off visual effects and started GSM again,checked process
21 matches
Mail list logo
