I can reproduce this with
sudo mount -t cifs -o
noauto,rw,uid=1000,gid=1000,guest,nounix,noserverino,file_mode=0660,dir_mode=0755,iocharset=utf8,vers=2.1
//192.168.1.1/backup/ /media/grumpy/brick
followed by running
nautilus
The network drive is a USB hard disk attached to my router.
Public bug reported:
After loading a cifs network drive on the command line, nautilus no
longer loads and shows
(org.gnome.Nautilus:17319): GVFS-WARNING **: 20:32:43.301: The peer-to-
peer connection failed: Timeout was reached. Falling back to the session
bus. Your application is probably
** This bug is no longer a duplicate of bug 1639776
name resolution (dnsmasq) fails to send queries out after suspend/resume
reconnects the interface
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
There are errors in the apacheds service.
The ones that I found were that
* ExecStart cannot start with a ${} value, but must be a fixed value, so
changing it to ExecStart=/usr/bin/java works
* java.io.IOException: ERR_112_COULD_NOT_CREATE_DIRECORY Could not create
1. It's version 352.63 as set in System Settings > Software & Updates >
Additional Drivers
2.It's version 3.2.1-9, same as
http://packages.ubuntu.com/wily/bumblebee
$ dpkg -s bumblebee
Package: bumblebee
Status: install ok installed
Priority: extra
Section: utils
Installed-Size: 182
Maintainer:
Same results with 4.4.0-rc8
$ uname -a
Linux flat 4.4.0-040400rc8-generic #201601051225 SMP Tue Jan 5 17:27:39 UTC
2016 x86_64 x86_64 x86_64 GNU/Linux
$ lspci
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation
** Changed in: linux (Ubuntu)
Status: Expired => New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1494236
Title:
10de:1292 Optirun does not run as kernel does not recognise 3D
Controller
Sorry for the delay. Updated to kernel 4.3.3 and still getting no result
with optirun, it should be returning more than 60 fps.
Key line in syslog is
Jan 8 23:19:40 localhost kernel: [ 552.980299] vgaarb: this pci device is not
a vga device
$ lspci
00:02.0 VGA compatible controller: Intel
Just upgraded to 15.10. Booting up with nvidia driver directly gives
glxgears running at expected result. Installing bumblebee and running
optimus glxgears gives /var/log/system entry and no expected result.
As a note - I have a Dell XPS as well, and I get the same result with
Ubuntu 15.04. My
Updates ASUS to BIOS 403. Using optirun gives same output in dmesg -
that pci is not a vga device and fps is running slow at max 60 fps.
(Should be several hundred to thousand).
$ sudo dmidecode -s bios-version && sudo dmidecode -s bios-release-date
X550LB.403
06/26/2014
$ optirun glxgears
I tried kernel v4.3-rc4, however I was unable to get bumblebee to run as
the nvidia driver was not supported. (It booted, but bumblebeed would
not start as there was no valid nvidia driver)
from /var/log/syslog
Oct 5 22:32:27 flat systemd[1]: bumblebeed.service holdoff time over,
This is based on
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1381175 for
machine.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1494236
Title:
Optirun does not run as kernel does not
Public bug reported:
$ lspci -nn
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT
Integrated Graphics Controller [8086:0a16] (rev 09)
...
04:00.0 3D controller [0302]: NVIDIA Corporation GK208M [GeForce GT 740M]
[10de:1292] (rev ff)
$ dmesg | fgrep vgaar
[ 0.243143]
Based on the original bug description, this issue affects me.
$ lspci -nn
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT
Integrated Graphics Controller [8086:0a16] (rev 09)
...
04:00.0 3D controller [0302]: NVIDIA Corporation GK208M [GeForce GT 740M]
[10de:1292] (rev
Hi, I've just installed version 2:3.5.4~dfsg-1ubuntu8.1and it seem to be
okay. I did a quick test with a 1.2Mb file from my machine to the
network server, and it went back and forth fine. I did this both before
and after a reboot, just to make sure the new library was being used.
--
[SRU] smb:
Hi, I've just installed version 2:3.5.4~dfsg-1ubuntu8.1and it seem to be
okay. I did a quick test with a 1.2Mb file from my machine to the
network server, and it went back and forth fine. I did this both before
and after a reboot, just to make sure the new library was being used.
--
[SRU] smb:
16 matches
Mail list logo