[Bug 1724317] Re: Shutdown hangs / no standby - possible Wifi-bug in the kernel
I just updated to Lubuntu 17.10 and experienced this issue. I have a Qualcomm Atheros QCA9377 card, and kernel version 4.13.0-16-generic had this same issue. I reverted back to 4.10.0-38-generic and the problem went away. I'm waiting for the next kernel release to see if that solves the problem. See also this thread: https://askubuntu.com/questions/965856/kworker- blocked-for-more-than-120-seconds-ubuntu-17-10/967440 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1724317 Title: Shutdown hangs / no standby - possible Wifi-bug in the kernel To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1724317/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1446247] Re: Lubuntu 15.04 - No power indicator in applet indicator
I have the same exact issue. I recently upgraded to 15.04. I had the power indicator icon in 14.10, but it disappeared when I upgraded. I was doing some searching online, and found a lot of people suggesting to going into the xfce4-power-manager-settings and setting Show tray icon: to Always show icon. Some of this information is a couple years old, so it is possible that the answer no longer applies. When I open xfce4-power-manager-settings, the Show tray icon option does not appear. More online research led me to the following configuration file: ~/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-power-manager.xml It looks like older versions of this file had a Show tray icon option [see https://forum.xfce.org/viewtopic.php?id=8786], but the one installed in 15.04 does not. Either this option is no longer supported, or someone left it out accidentally. Maybe this can lead someone towards a solution for this problem. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1446247 Title: Lubuntu 15.04 - No power indicator in applet indicator To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/xfce4-power-manager/+bug/1446247/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 664534] Re: feature request: do-release-upgrade --download-only
Also see the answers given to this question: http://askubuntu.com/questions/54681/can-i-make-do-release-upgrade-only- download-packages-for-a-later-upgrade -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/664534 Title: feature request: do-release-upgrade --download-only To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/update-manager/+bug/664534/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1242164] Re: package sane-utils (not installed) failed to install/upgrade: subprocess installed post-installation script returned error exit status 127
This happened to me when updating to 14.04. - Trusty -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1242164 Title: package sane-utils (not installed) failed to install/upgrade: subprocess installed post-installation script returned error exit status 127 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/sane-backends/+bug/1242164/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 1268326] Re: locate spawns very CPU hungry find process
Related: https://bugs.launchpad.net/ubuntu/+source/findutils/+bug/332790 https://bugs.launchpad.net/ubuntu/+source/mlocate/+bug/1190696 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1268326 Title: locate spawns very CPU hungry find process To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/findutils/+bug/1268326/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 902557] Re: Wireless not working in 12.04 for rtl8192ce (RTL8188CE)
I've been having issues with the realtek wireless on my Toshiba Satellite L645 running lubuntu 12.10. I want to try and install the latest driver from realtek's website, 0012.0207.2013 - http://www.realtek.com.tw/DOWNLOADS/downloadsView.aspx?Langid=1PNid=21PFid=48Level=5Conn=4DownTypeID=3GetDown=falseDownloads=true#2722 -, but would prefer not to do it from source. There is a ppa for realtek drivers, but it hasn't been updated in a while: https://launchpad.net/~lexical/+archive/hwe-wireless Are there any other methods of installing the driver without installing from source? I'm mainly worried about how it will interact with linux- backports-modules-cw-3.6-quantal-generic and making sure that if I need to uninstall it, I can do it successfully. Is there another PPA that supplies this driver? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/902557 Title: Wireless not working in 12.04 for rtl8192ce (RTL8188CE) To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/902557/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 862348] Re: phantom RFKILL switch disables wireless after boot.
** Changed in: linux (Ubuntu) Status: Incomplete = Invalid -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/862348 Title: phantom RFKILL switch disables wireless after boot. To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/862348/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 880240] Re: ubuntu 11.10 : the system doesn't turn off if sudo halt is given
changing /etc/default/halt to: HALT=halt didn't make any difference. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/880240 Title: ubuntu 11.10 : the system doesn't turn off if sudo halt is given To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/880240/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 880240] Re: ubuntu 11.10 : the system doesn't turn off if sudo halt is given
Is this an ubuntu change or an upstream change? -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/880240 Title: ubuntu 11.10 : the system doesn't turn off if sudo halt is given To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/880240/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 880240] Re: ubuntu 11.10 : the system doesn't turn off if sudo halt is given
This bug did not affect me when I was running lubuntu 11.04, but started affecting me when I upgraded to 11.10. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/880240 Title: ubuntu 11.10 : the system doesn't turn off if sudo halt is given To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/upstart/+bug/880240/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 768496] [NEW] Rotate in place doesn't work, doesn't display error
Public bug reported: Binary package hint: feh I'm have the following installed: Ubuntu 10.10 feh 1.7-1 libjpeg-progs 8b-1 exiftran 2.07-3 When I try to rotate an image using feh's inplace editing (right- clicking the image, and chosing Rotate 90 CW for example), nothing happens. The picture does not rotate. Feh does not display any error message, but when I run feh from the command line, I get the following error message (the picture I'm trying to rotate is called p165.jpg: --- jpegtran: can't open p165.jpg for writing feh WARNING: lossless rotate: Got exitcode 1 from jpegtran. Commandline was: jpegtran -copy all -rotate -1076465748 -outfile p165.jpg p165.jpg --- When I try to run the jpegtran command directly from the command line, all I get is the help menu, so the command feh is trying to run isn't working for some reason. ** Affects: feh (Ubuntu) Importance: Undecided Status: New -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/768496 Title: Rotate in place doesn't work, doesn't display error -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 768496] Re: Rotate in place doesn't work, doesn't display error
I just figured out what the problem was. The pictures were read-only (since I copied them from a CD), and feh was silently failing when trying to rotate the image. Making the pictures writable solved the problem, but it would have been nice if feh had given some kind of indication as to why it failed (or perhaps even disable the options that don't work when the picture is read-only). I will try to update the bug report to reflect this. ** Description changed: Binary package hint: feh I'm have the following installed: Ubuntu 10.10 feh 1.7-1 libjpeg-progs 8b-1 exiftran 2.07-3 When I try to rotate an image using feh's inplace editing (right- clicking the image, and chosing Rotate 90 CW for example), nothing happens. The picture does not rotate. Feh does not display any error message, but when I run feh from the command line, I get the following error message (the picture I'm trying to rotate is called p165.jpg: --- jpegtran: can't open p165.jpg for writing feh WARNING: lossless rotate: Got exitcode 1 from jpegtran. Commandline was: jpegtran -copy all -rotate -1076465748 -outfile p165.jpg p165.jpg --- When I try to run the jpegtran command directly from the command line, all I get is the help menu, so the command feh is trying to run isn't working for some reason. + + Edited to add: + The reason for this error was that the file I was trying to rotate was read-only. However, feh didn't give any indication of what the problem was, it just failed silently. It would be nice if there was some kind of indication why the action failed, or perhaps the options shouldn't be available when the picture cannot be written. ** Summary changed: - Rotate in place doesn't work, doesn't display error + Rotate in place fails silently when the picture is read-only -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/768496 Title: Rotate in place fails silently when the picture is read-only -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 599434] Re: Atheros AR928X wireless card not working after suspend
This is a bug in Network Manager. I recently experienced it and found the fix on the Ubuntu Forums, here: http://ubuntuforums.org/showpost.php?p=932postcount=4 to quote: --- Check both of these, should be: /etc/NetworkManager/nm-system-settings.conf [main] plugins=ifupdown,keyfile [ifupdown] managed=true --- and /var/lib/NetworkManager/NetworkManager.state [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true -- For some reason, when I restarted Network Manager after suspend, some of the settings were set to false instead of true. This is why networking was disabled. I changed them back to true and then restarted the computer. When I rebooted wireless was working again. (There probably is a way to do it without rebooting, but just restarting NetworkManager didn't work for me) -- Atheros AR928X wireless card not working after suspend https://bugs.launchpad.net/bugs/599434 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 599434] Re: Atheros AR928X wireless card not working after suspend
I just found this bug in launchpad: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/524454 Unless I'm barking up the wrong tree, this is a duplicate of that bug. -- Atheros AR928X wireless card not working after suspend https://bugs.launchpad.net/bugs/599434 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 370735] Re: terminated on stack smashing detected message
This is still an issue in Lucid. I just installed version 0.2-11 in Lucid and got the same error. -- terminated on stack smashing detected message https://bugs.launchpad.net/bugs/370735 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 341966] Re: playback will not begin
I had this issue using the latest smplayer and mplayer from the launchpad repositories. The freezes were happening in mplayer and in smplayer. I changed the audio output to pulse instead of alsa and the problem went away. I changed them both in /etc/mplayer/mplayer.conf and in smplayer's preferences. -- playback will not begin https://bugs.launchpad.net/bugs/341966 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 381318] Re: hellanzb hangs after transfering - doesn't unrar or move to done
Somebody posted a temporary fix as a comment to this bug report: http://hellanzb.com/trac/hellanzb/ticket/425 Here is the comment: http://hellanzb.com/trac/hellanzb/ticket/425#comment:6 The fix has hellanzb delete any nzb files downloaded before beginning the post processing. ** Bug watch added: hellanzb.com/trac/hellanzb/ #425 http://hellanzb.com/trac/hellanzb/ticket/425 -- hellanzb hangs after transfering - doesn't unrar or move to done https://bugs.launchpad.net/bugs/381318 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 381318] Re: hellanzb hangs after transfering - doesn't unrar or move to done
I found a bug report on hellanzb's website that describes the same bug: http://hellanzb.com/trac/hellanzb/ticket/429 One of the comments links to another bug report of the similar issue: http://hellanzb.com/trac/hellanzb/ticket/429 In the comments to that bug report, they find that if the nzb file fed to hellanzb includes an nzb file, hellanzb will hang after downloading everything. I have confirmed that this is the case. In all the nzb files that hang after transfer, an nzb file was also downloaded. ** Bug watch added: hellanzb.com/trac/hellanzb/ #429 http://hellanzb.com/trac/hellanzb/ticket/429 -- hellanzb hangs after transfering - doesn't unrar or move to done https://bugs.launchpad.net/bugs/381318 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 381318] [NEW] hellanzb hangs after transfering - doesn't unrar or move to done
Public bug reported: Binary package hint: hellanzb I am running jaunty with hellanzb version 0.13-3ubuntu4 Every once in a while, I will have an nzb that just hangs after transfering files are complete. Hellanzb doesn't unrar the file or move the files to the done folder without doing anything. It just sits there saying Transfered...etc. The files themselves stay in the daemon.processing/ folder until I do something with them manually. If I Ctrl-C to exit hellanzb and then restart it, it starts the download over again (probably because the nzb file is still in the daemon.current/ folder) This doesn't happen with every nzb, but I am able to reproduce it with specific nzb files. Here is some informtation about the latest file I was able to get it with: I got the nzb file from here: http://www.tvnzb.com/nzb/21713 Here is the output of hellanzb status: - Queued: 410.8MB Skipping pars.. (Skipped par2: the.unusuals.s01e07.hdtv.xvid-2hd.vol00+01.par2 ( 1MB)) Skipped pars: 7 files, 39.7MB (actual skipped: 37.1MB) sample-the.unusuals.s01e07.hdtv.xvid-2hd.avi.vol0+1.par2 (1 files, 1.1MB, 1 blo cks) the.unusuals.s01e07.hdtv.xvid-2hd.vol00+01.par2 - the.unusuals.s01e07.hdtv.xvid-2hd.vol20+14.par2 (6 files, 38.6MB, 34 blocks) Transferred 376.0MB in 6m 6s at 1050.3KB/s (The.Unusuals.S01E07.HDTV.XviD-2HD) Downloading: None Processing: None Queued: None - I will attach my hellanzb.conf, as well as a log and debug log of the process. Please let me know if you need anything more. ** Affects: hellanzb (Ubuntu) Importance: Undecided Status: New -- hellanzb hangs after transfering - doesn't unrar or move to done https://bugs.launchpad.net/bugs/381318 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 381318] Re: hellanzb hangs after transfering - doesn't unrar or move to done
** Attachment added: debug log of process http://launchpadlibrarian.net/27240395/nzb.debug -- hellanzb hangs after transfering - doesn't unrar or move to done https://bugs.launchpad.net/bugs/381318 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 381318] Re: hellanzb hangs after transfering - doesn't unrar or move to done
** Attachment added: hellanzb log file output http://launchpadlibrarian.net/27240516/nzb.log -- hellanzb hangs after transfering - doesn't unrar or move to done https://bugs.launchpad.net/bugs/381318 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 381318] Re: hellanzb hangs after transfering - doesn't unrar or move to done
** Attachment added: copy of my hellanzb.conf (username and password altered) http://launchpadlibrarian.net/27240554/hellanzb.conf -- hellanzb hangs after transfering - doesn't unrar or move to done https://bugs.launchpad.net/bugs/381318 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 67164] Re: Evince print dialog doesn't respect page setup settings
I have the same issue as Sune. I am also running Ubuntu 8.10 I am Using Document Viewer 2.24.1 which, according to the about page, is using poppler 0.8.7 (cairo). I am able to print 2 pages per side, but I am not able to change the page ordering. I change the page ordering so that it is Right to Left, but it still prints (and previews) Left to Right. -- Evince print dialog doesn't respect page setup settings https://bugs.launchpad.net/bugs/67164 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 332324] [NEW] evince printing doesn't respect page ordering
Public bug reported: Binary package hint: evince I am running Ubuntu 8.10 and am using Document Viewer 2.24.1 which, according to the about page, is using poppler 0.8.7 (cairo). I am able to print 2 pages per side, but I am not able to successfully change the page ordering. I change the page ordering so that it is Right to Left (instead of the default Left to Right), but it still prints (and previews) Left to Right. I originally posted this as a comment for bug 67164 -- https://bugs.launchpad.net/ubuntu/+source/evince/+bug/67164 , but was told to create a new bug report. There is a similar bug report about gtk+2.0 -- https://bugs.launchpad.net/ubuntu/+source/gtk+2.0/+bug/328143 . I am not sure if this is the same bug or not. ** Affects: evince (Ubuntu) Importance: Undecided Status: New ** Description changed: Binary package hint: evince I am running Ubuntu 8.10 and am using Document Viewer 2.24.1 which, according to the about page, is using poppler 0.8.7 (cairo). I am able to print 2 pages per side, but I am not able to successfully change the page ordering. I change the page ordering so that it is Right to Left (instead of the default Left to Right), but it still prints (and previews) Left to Right. - I originally posted this as a comment for a - href=https://bugs.launchpad.net/ubuntu/+source/evince/+bug/67164;bug - 67164/a , but was told to create a new bug report. + I originally posted this as a comment for bug 67164 -- + https://bugs.launchpad.net/ubuntu/+source/evince/+bug/67164 , but was + told to create a new bug report. - There is a similar bug report about gtk+2.0 -- a - href=https://bugs.launchpad.net/ubuntu/+source/gtk+2.0/+bug/328143;bug - report #328143/a. I am not sure if this is the same bug or not. + There is a similar bug report about gtk+2.0 -- + https://bugs.launchpad.net/ubuntu/+source/gtk+2.0/+bug/328143 . I am not + sure if this is the same bug or not. -- evince printing doesn't respect page ordering https://bugs.launchpad.net/bugs/332324 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 67164] Re: Evince print dialog doesn't respect page setup settings
Reported it here: https://bugs.launchpad.net/ubuntu/+source/evince/+bug/332324 -- Evince print dialog doesn't respect page setup settings https://bugs.launchpad.net/bugs/67164 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 233900] Re: hellanzb queues NZBs but does not download
I just tried using hellanzb in Intrepid, but the fix mentioned above did not work. Instead, I used the a href=http://www.hellanzb.com/trac/hellanzb/ticket/393#comment:17;last fix mentioned in the hellanzb bug tracker thread/a (copied below). - diff -r 92936345c3f5 Hellanzb/NZBLeecher/Protocol.py --- a/Hellanzb/NZBLeecher/Protocol.py Mon Aug 18 10:38:55 2008 +0200 +++ b/Hellanzb/NZBLeecher/Protocol.py Mon Aug 18 11:34:20 2008 +0200 @@ -655,7 +655,7 @@ reactor.callInThread(decode, segment) def gotGroup(self, group): -group = group[3] +group = self.gettingGroup self.activeGroups.append(group) self.gettingGroup = None debug(str(self) + ' got GROUP: ' + group) - This change enabled me to use hellanzb in Intrepid. According to the thread, it is also the way Gentoo fixed the problem. -- hellanzb queues NZBs but does not download https://bugs.launchpad.net/bugs/233900 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 233900] Re: hellanzb queues NZBs but does not download
I looked at the Debian package changelog on the package page (http://packages.qa.debian.org/h/hellanzb.html) and it appears that the fix has not been integrated into Debian's package. It was reported on August 18, 2008 (http://bugs.debian.org/cgi- bin/bugreport.cgi?bug=495518), but it has not been integrated into the Debian package. If it has not been integrated into the Debian package, it will not end up in Intrepid (unless Ubuntu puts it in themselves). -- hellanzb queues NZBs but does not download https://bugs.launchpad.net/bugs/233900 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 250243] [NEW] incorrect or misleading info in zip help text
Public bug reported: Binary package hint: zip I am running Ubuntu 8.04 and using zip version 2.32-1 The help text zip displays says this: Copyright (c) 1990-2006 Info-ZIP - Type 'zip -L' for software license. Zip 2.32 (June 19th 2006). Usage: zip [-options] [-b path] [-t mmdd] [-n suffixes] [zipfile list] [-xi list] It doesn't say anything about where to put the archive name argument in order to get the files zipped up. The zip man page does say it, but the command line help output doesn't. ** Affects: zip (Ubuntu) Importance: Undecided Status: New -- incorrect or misleading info in zip help text https://bugs.launchpad.net/bugs/250243 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 233900] [NEW] hellanzb queues NZBs but does not download
Public bug reported: Binary package hint: hellanzb I am running Ubuntu 8.04 (hardy) hellanzb version 0.13-3 When I run Hellanzb and import and NZB, it will queue the nzb, but it won't download the files. I found the same bug reported here: http://www.hellanzb.com/trac/hellanzb/ticket/393 I followed the directions in Comment 6, and the problem was solved: http://www.hellanzb.com/trac/hellanzb/ticket/393#comment:6 I edited the file /usr/share/python-support/hellanzb/Hellanzb/NZBLeecher/Protocol.Py and right below line 513 I added: group = group.strip() This solved the problem. Hopefully someone will fix this problem and upload a new version of hellanzb to the repositories. ** Affects: hellanzb (Ubuntu) Importance: Undecided Status: New -- hellanzb queues NZBs but does not download https://bugs.launchpad.net/bugs/233900 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 114552] Digikam hangs with Progress Dialog when deleting files
Public bug reported: Binary package hint: digikam When Ubuntu Feisty came out, I did a clean install (the Gnome based version) and then installed digikam from the ubuntu repository. I am now experiencing a problem that I did not have with edgy. Basically, when I delete a picture (either by hitting the delete key or right clicking the picture and choosing to move it to trash), The delete Progress Dialog just hangs there for a long time and the photo doesn't delete. After a while I close the dialog box. Sometime the picture then deletes, and other times the picture does not delete. If the picture does delete, I am then able to delete further pictures without a problem. I don't think this happens 100% of the time, but it happens most of the time. I don't know if this is a settings issue or something else. The only nonstandard setting I have is that I deleted ~/.local/share/Trash/files and then I created a symbolic link from ~/.Trash to ~/.local/share/Trash/files. Menachem ** Affects: digikam (Ubuntu) Importance: Undecided Status: Unconfirmed -- Digikam hangs with Progress Dialog when deleting files https://bugs.launchpad.net/bugs/114552 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 63865] Re: screen freeze returning from xscreensaver
I haven't upgraded the computer to Feisty yet, is there another way to test the driver? I did upgrade the computer to Edgy recently, will that help at all? -- screen freeze returning from xscreensaver https://bugs.launchpad.net/bugs/63865 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 63865] Re: screen freeze returning from xscreensaver
I am running Dapper and have the same issue. The screen freezes but I am still able to ssh into the machine, as well as access SAMBA shares. Although I would describe it as freezing while using xscreensaver, as opposed to freezing when returning from xscreensaver, since the screensaver itself freezes as well. I then have to reboot the computer in order to access X again. xorg.conf tells me that the video card is a Matrox Graphics, Inc. MGA G400 AGP. I will try to attach my xorg.conf, Xorg.0.log, and dmesg output. Let me know if you need anything else. ** Attachment added: dmesg output of frozen computer http://librarian.launchpad.net/6689599/dmesg.log -- screen freeze returning from xscreensaver https://launchpad.net/bugs/63865 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 63865] Re: screen freeze returning from xscreensaver
Can I really only put one attachment per email? ** Attachment added: Xorg.0.log of frozen GUI http://librarian.launchpad.net/6689613/Xorg.0.log -- screen freeze returning from xscreensaver https://launchpad.net/bugs/63865 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 75435] Re: Gnome and KDE trash are incompatible. Was: usdigikam expects trash to be in ~/Desktop/Trash - causes error in Ubuntu
I checked, and kdebase-kio-plugins was not installed, so I installed it. Now my KDE trash is located in ~/.local/share/Trash/files, and deleting pictures in digikam moves them there. In order to have KDE and Gnome apps use the same trash, can I just delete ~/.local/share/Trash/files, and then link ~/.Trash to ~/.local/share/Trash/files? Will there be any repercussions to doing this? With regards to Gnome and KDE apps integration, is it considered a bug that KDE apps on Ubuntu use a different Trash than Gnome apps? Should kdebase-kio-plugins be added as a dependency for digikam? -- Gnome and KDE trash are incompatible. Was: usdigikam expects trash to be in ~/Desktop/Trash - causes error in Ubuntu https://launchpad.net/bugs/75435 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 75435] Re: Gnome and KDE trash are incompatible. Was: usdigikam expects trash to be in ~/Desktop/Trash - causes error in Ubuntu
I forgot to add that with kdebase-kio-plugins, I no longer need a ~/Desktop/Trash folder in order to delete a picture, so I guess the original bug might be considered solved. -- Gnome and KDE trash are incompatible. Was: usdigikam expects trash to be in ~/Desktop/Trash - causes error in Ubuntu https://launchpad.net/bugs/75435 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 75435] Re: digikam expects trash to be in ~/Desktop/Trash - causes error in Ubuntu
Achim Here is the output of the commands. As you can see, I also don't have a Desktop/trash.desktop directory. [EMAIL PROTECTED]:~$ echo $XDG_DATA_HOME [EMAIL PROTECTED]:~$ kde-config --path xdgdata-dirs /home/mshapiro/.local/share/desktop-directories/:/usr/share/desktop-directories/ [EMAIL PROTECTED]:~$ kde-config --path xdgdata-apps /home/mshapiro/.local/share/applications/:/usr/share/applications/ [EMAIL PROTECTED]:~$ cat /home/mshapiro/Desktop/trash.desktop cat: /home/mshapiro/Desktop/trash.desktop: No such file or directory I just copied your trash.desktop into a file on my desktop and got this error message when starting digikam (the program still started): kio (KService*): WARNING: The desktop entry file /usr/share/applications/DefaultPlugins.desktop has Type=Link instead of Application or Service kio (KService*): WARNING: Invalid Service : /usr/share/applications/DefaultPlugins.desktop I was not able to use digikam to delete a picture. Menachem -- Gnome and KDE trash are incompatible. Was: usdigikam expects trash to be in ~/Desktop/Trash - causes error in Ubuntu https://launchpad.net/bugs/75435 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 75435] Re: digikam expects trash to be in ~/Desktop/Trash - causes error in Ubuntu
BH On 1/17/07, allee [EMAIL PROTECTED] wrote: Hi Menachem, I've create a fresh default ubuntu edgy installation, and aptitude install'ed digikam, and Pictures I deleted in digikam ended up in ~/.local/share/Trash (that did not exists before I started digikam. Maybe the protection of ~/.local is wrong so kio_trash can't create it? What should the permissions for ~/.local and ~/.local/share be? I got: [EMAIL PROTECTED]:~$ ls -ld .local/ drwx-- 3 mshapiro mshapiro 4096 2006-04-23 06:36 .local/ and the same for ~/.local/share as well. Nevertheless creating a soft link ln -s ~/.Trash ~/.local/share/Trash should fix your problem (tested here works fine. Gnome trash gets the counting wrong from because it does not understand the XDG draft but that's cosmetic.) Creating ~/.local/share/Trash did not work, it still failed. If the permissions are wrong for ~/.local, that might explain why. Menachem Achim -- Gnome and KDE trash are incompatible. Was: usdigikam expects trash to be in ~/Desktop/Trash - causes error in Ubuntu https://launchpad.net/bugs/75435 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 75435] Re: digikam expects trash to be in ~/Desktop/Trash - causes error in Ubuntu
BH Achim Before I start, I want to say that since I posted this bug, I upgraded to digikam 0.9.0, using your unofficial packages at http://www.mpe.mpg.de/~ach/kubuntu/edgy/Pkgs.php. On 1/16/07, allee [EMAIL PROTECTED] wrote: That's strange. With kubuntu edgy my trash is in ~/.local/share/Trash/ when I move this directory away and move a picture in digikam to Trash it gets recreated. Can you check that you 'trashed' images from digikam really end up in ~/.Trash and not below ~/.local/share/Trash/* ? I don't have a Trash folder in ~/.local/share/Trash. All I have is an applications folder. The Trashed images really end up in ~/.Trash, here is the output: --- [EMAIL PROTECTED]:~$ ls -l /home/mshapiro/Desktop/Trash lrwxrwxrwx 1 mshapiro mshapiro 22 2006-12-11 21:15 /home/mshapiro/Desktop/Trash - /home/mshapiro/.Trash/ [EMAIL PROTECTED]:~$ ls /home/mshapiro/Desktop/Trash IMG_1278.JPG IMG_1328.JPG IMG_1366.JPG IMG_1586.JPG IMG_1619.JPG IMG_1279.JPG IMG_1329.JPG IMG_1368.JPG IMG_1588.JPG IMG_1620.JPG IMG_1280.JPG IMG_1331.JPG IMG_1377.JPG IMG_1592.JPG IMG_1621.JPG IMG_1290.JPG IMG_1332.JPG IMG_1384.JPG IMG_1602.JPG IMG_1622.JPG IMG_1298.JPG IMG_1334.JPG IMG_1392.JPG IMG_1603.JPG IMG_1623.JPG IMG_1299.JPG IMG_1335.JPG IMG_1395.JPG IMG_1606.JPG IMG_1624.JPG IMG_1300.JPG IMG_1337.JPG IMG_1401.JPG IMG_1609.JPG IMG_1625.JPG IMG_1301.JPG IMG_1346.JPG IMG_1402.JPG IMG_1610.JPG IMG_1627.JPG IMG_1309.JPG IMG_1347.JPG IMG_1403.JPG IMG_1611.JPG IMG_1628.JPG IMG_1318.JPG IMG_1353.JPG IMG_1404.JPG IMG_1612.JPG IMG_1630.JPG IMG_1322.JPG IMG_1354.JPG IMG_1409.JPG IMG_1614.JPG IMG_1631.JPG IMG_1323.JPG IMG_1355.JPG IMG_1413.JPG IMG_1616.JPG IMG_1638.JPG IMG_1325.JPG IMG_1358.JPG IMG_1417.JPG IMG_1617.JPG IMG_1641.JPG IMG_1326.JPG IMG_1359.JPG IMG_1555.JPG IMG_1618.JPG When you start digikam from the command line is there anything suspect written to the termial when you delete an image in digikam? I just deleted the ~/Desktop/Trash symbolic link and tried deleting a file. Here is the message that came up in the terminal: OggS-SEEK: at 704 want 47096 got 23104 (diff-requested 46392) OggS-SEEK: at 47040 want 1032 got 0 (diff-requested -46008) What method are you using to delete picture? o RMB over a thumbnail and 'Move to Trash' o drag and drop to gnome trash icon o or ... RMB over a thumbnail and 'Move to Trash'. Hitting the Delete Key in the digiKam Image Editor also gives the same error. What's the output of 'digikam --version'? Again, this is the output from the unofficial package, but: [EMAIL PROTECTED]:~$ digikam --version Qt: 3.3.6 KDE: 3.5.5 digiKam: 0.9.0 I hope this helps, as the problem seem to still be with 0.9.0. Menachem Achim -- digikam expects trash to be in ~/Desktop/Trash - causes error in Ubuntu https://launchpad.net/bugs/75435 -- digikam expects trash to be in ~/Desktop/Trash - causes error in Ubuntu https://launchpad.net/bugs/75435 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 75435] digikam expects trash to be in ~/Desktop/Trash - causes error in Ubuntu
Public bug reported: Binary package hint: digikam I am using digikam version 0.8.2-2ubuntu1 in Ubuntu (Gnome based). I tried to delete a picture and got an error message saying could not rename file FILENAME (where FILENAME was the name of the file it was trying to delete). I looked around and found this bug report on KDE's site: http://bugs.kde.org/show_bug.cgi?id=123120 In the comments on the bug, someone advises to link ~/.Trash to ~/Desktop/Trash. Doing so solves the problem, and deleting the file is possible. I am assuming that this is because KDE (and Kubuntu) uses ~/Desktop/Trash as the trashcan, while Gnome (and Ubuntu) uses ~/.Trash. Can the program be tweaked to look for the trash in either place? ** Affects: digikam (Ubuntu) Importance: Undecided Status: Unconfirmed -- digikam expects trash to be in ~/Desktop/Trash - causes error in Ubuntu https://launchpad.net/bugs/75435 -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
