[Bug 222770] Re: HARDY: Show stopper bug: Blank screen only with cursor
Hello, after some searching i have found this bug: https://bugs.launchpad.net/ubuntu/+bug/218434 is seems to be exactly what i am experiencing. can i refer you to that as it is still in effect in the release of hardy and experienced by quite a few people. can i add i don't believe it to be because of flash based hardware. many thanks -- HARDY: Show stopper bug: Blank screen only with cursor https://bugs.launchpad.net/bugs/222770 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 218434] Re: gnome-keyring-daemon crashed with SIGSEGV
I am getting the same problem. I do not use any flash based storage. I have installed the hardy release the live cd boots up fine, i install, restart log in then I'm confronted with the same problem of the original bug post. I did a clean install with a burned ISO of final release of hardy, not beta or rc. This bug is still present in the release version. I use two hardware raid arrays. one to store /, swap and one to store /home. My controller is: Adaptec 2610sa I have been using this card since feisty, perhaps before. A solution would be nice as i'm having to use the live cd at the moment. ** Attachment added: here is a copy of my xsession-errors file http://launchpadlibrarian.net/13960565/xsession-errors -- gnome-keyring-daemon crashed with SIGSEGV https://bugs.launchpad.net/bugs/218434 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 218434] Re: gnome-keyring-daemon crashed with SIGSEGV
SUMMARY Hardware Affected It seems to me, some people using eee pc's, adaptec raid cards models 2410sa and 2610sa, usb drives. IDE drives seem unaffected, thanks doobydave. Two possible solutions have been found, perhaps someone could test them: 1. Grugnog suggest https://bugs.launchpad.net/ubuntu/+source/gnome-keyring/+bug/218434/comments/8 2. bbauto suggests this https://bugs.launchpad.net/ubuntu/+source/gnome-keyring/+bug/218434/comments/32 this is also found in bug: https://bugs.launchpad.net/bugs/221850 perhaps if users are tracking this bug, they could report what hardware they are running hardy on. esp. if it similar to what is mentioned above. -- gnome-keyring-daemon crashed with SIGSEGV https://bugs.launchpad.net/bugs/218434 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 222770] [NEW] HARDY: Show stopper bug: Blank screen only with cursor
Public bug reported: Binary package hint: ubuntu-desktop I downloaded the new Ubuntu release hardy. did a clean install, preserving my home dir. The live Cd boots and load okay. then i install, try and log in and i'm confronted with a blank screen with only my cursor. i have tried deleting the .gnome(2) settings folders but this doesn't help. i can find no information on why it is hanging like this. as i said earlier it is a blank orange screen with my mouse cursor which i can move around. i can use the terminals tty1-tty6. please help. this is the release of hardy i don't know what to do. ** Affects: ubuntu-meta (Ubuntu) Importance: Undecided Status: New -- HARDY: Show stopper bug: Blank screen only with cursor https://bugs.launchpad.net/bugs/222770 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 218434] Re: gnome-keyring-daemon crashed with SIGSEGV
I confirm this on my desktop, however not my laptop running the same version, both with all updates. i have been logging in fine, however now i look at dmesg and i see gnome-keyring-d segfault... no graphical login is possible, however i can login via Ctrl+Alt+F1 -- gnome-keyring-daemon crashed with SIGSEGV https://bugs.launchpad.net/bugs/218434 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 187383] Re: System monitor causes Xorg to consume 100% CPU
Hi, i have the same problem please take a look at the screen shot i have taken, the lettering has been replaced by strange symbols, and as other people my cpu usage goes to 100%, another note the graphs seems distorted. hope this helps. i have a P4 3.20 ghz, with hyper-threading turned off, when turned on comes up as two cores, but that's another problem! ** Attachment added: Screen shot of System monitor http://launchpadlibrarian.net/13151550/Screenshot-System%20Monitor.png -- System monitor causes Xorg to consume 100% CPU https://bugs.launchpad.net/bugs/187383 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 93360] Re: Dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.reason
I'm confirming it for Hardy latest on Thinkpad T41. [EMAIL PROTECTED]:~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=8.04 DISTRIB_CODENAME=hardy DISTRIB_DESCRIPTION=Ubuntu hardy (development branch) [EMAIL PROTECTED]:~$ uname -a Linux james-laptop 2.6.24-12-generic #1 SMP Mon Mar 10 15:32:00 UTC 2008 i686 GNU/Linux [EMAIL PROTECTED]:~$ grep redhat /var/log/messages Mar 6 12:26:47 james-laptop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/ath0 for sub-path ath0.dbus.get.reason Mar 6 12:30:25 james-laptop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/ath0 for sub-path ath0.dbus.get.reason Mar 6 12:38:36 james-laptop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/ath0 for sub-path ath0.dbus.get.reason Mar 6 12:41:00 james-laptop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/ath0 for sub-path ath0.dbus.get.reason Mar 6 12:41:53 james-laptop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason Mar 6 12:41:56 james-laptop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.domain_name Mar 6 12:41:56 james-laptop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_domain Mar 6 12:41:56 james-laptop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_servers Mar 6 12:41:56 james-laptop dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.interface_mtu Note my wireless is broken as of a recent upgrade. I'm not sure this is the relevant bug though. -- Dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth1 for sub-path eth1.dbus.get.reason https://bugs.launchpad.net/bugs/93360 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 194832] Re: network traffic pulsing
** Attachment added: Screenshot showing slow gigabit ethernet speeds, with pulsing. http://launchpadlibrarian.net/12164869/Screenshot-System%20Monitor.png -- network traffic pulsing https://bugs.launchpad.net/bugs/194832 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 194832] Re: network traffic pulsing
The post might offer a fix: http://ubuntuforums.org/showthread.php?t=473966highlight=slow+gigabit I shall try compiling the e1000 driver and post the results -- network traffic pulsing https://bugs.launchpad.net/bugs/194832 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 194832] Re: network traffic pulsing
This person seems to be suffering the same problem: http://ubuntuforums.org/showthread.php?t=638574 -- network traffic pulsing https://bugs.launchpad.net/bugs/194832 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 194832] Re: network traffic pulsing
Here is some more information: [EMAIL PROTECTED]:~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=8.04 DISTRIB_CODENAME=hardy DISTRIB_DESCRIPTION=Ubuntu hardy (development branch) [EMAIL PROTECTED]:~$ sudo lspci -vv ... 02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03) Subsystem: IBM PRO/1000 MT Mobile Connection Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 64 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: Memory at c022 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at c020 (32-bit, non-prefetchable) [size=64K] Region 2: I/O ports at 8000 [size=64] [virtual] Expansion ROM at c024 [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- ... [EMAIL PROTECTED]:~$ sudo ethtool eth0 Settings for eth0: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Advertised auto-negotiation: Yes Speed: 1000Mb/s Duplex: Full Port: Twisted Pair PHYAD: 0 Transceiver: internal Auto-negotiation: on Supports Wake-on: umbg Wake-on: g Current message level: 0x0007 (7) Link detected: yes [EMAIL PROTECTED]:~$ sudo lshw -C network *-network:0 description: Ethernet interface product: 82540EP Gigabit Ethernet Controller (Mobile) vendor: Intel Corporation physical id: 1 bus info: [EMAIL PROTECTED]:02:01.0 logical name: eth0 version: 03 serial: 00:0d:60:75:a5:00 size: 1GB/s capacity: 1GB/s width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=e1000 driverversion=7.3.20-k2-NAPI duplex=full firmware=N/A ip=192.168.1.113 latency=64 link=yes mingnt=255 module=e1000 multicast=yes port=twisted pair speed=1GB/s [EMAIL PROTECTED]:~$ ifconfig ath0 Link encap:Ethernet HWaddr 00:05:4e:48:69:ab UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:515808 errors:1 dropped:0 overruns:0 frame:0 TX packets:307201 errors:1 dropped:1 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:380336307 (362.7 MB) TX bytes:23458895 (22.3 MB) eth0 Link encap:Ethernet HWaddr 00:0d:60:75:a5:00 inet addr:192.168.1.113 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::20d:60ff:fe75:a500/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5998 errors:0 dropped:0 overruns:0 frame:0 TX packets:4485 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7440645 (7.0 MB) TX bytes:487599 (476.1 KB) Base address:0x8000 Memory:c022-c024 -- network traffic pulsing https://bugs.launchpad.net/bugs/194832 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 194832] [NEW] network traffic pulsing
Public bug reported: I am having problems with my network, i believe this is a bug. I have a laptop (ThinkPad T41) connected at 1000 Mb/s with a gigabit switch with all Cat6 to my desktop with hardware raid, with a gigabit network card in, connected at 1000 Mb/s. However when copying file i get a maximum of 6 -9 mb/s with it averaging around 3. This is really poor for a gigabit network. Here is some more information about my network hardware and software: Router Hardware: Buffalo WHR-G54S Firmware: Tomato 1.16 Switch: 3com Gigabit Switch 8 Cabling: All Cat6 Here is some information from some commands: (I am running Hardy, although i only upgraded yesterday to see if it would fix the problem, however it does not, i was experiencing the same problems with Gutsy.) ** Affects: ubuntu Importance: Undecided Status: New -- network traffic pulsing https://bugs.launchpad.net/bugs/194832 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 194832] Re: network traffic pulsing
okay, compiling the new e1000 driver seemed to do the job, i now get 40mbs, no pulsing, and would get more speed i guess if my other nic card wasn't limited to a mtu of 7000. See below for more details: http://sourceforge.net/projects/e1000/ The e1000 version: 7.6.15.4 module should be included in Hardy. -- network traffic pulsing https://bugs.launchpad.net/bugs/194832 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 194832] Re: network traffic pulsing
UPDATE: The previous post did work, and has set my mtu. however i am still experiencing the pulsing and slow speeds. The screen shot shows what i am talking about: The high speed activity it over HTTP and the lower speed is over samba (SMB) as you can see both signals are pulsing. Although setting the correct MTU has speed things up it still hasn't solved the pulsing problem. compiling the latest driver doesn't seem to do anything. ignore my post about the updated e1000 driver. ** Attachment added: clearly shows the slow speeds over SMB and pulsing. http://launchpadlibrarian.net/12172643/Screenshot-System%20Monitor.png -- network traffic pulsing https://bugs.launchpad.net/bugs/194832 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 194832] Re: network traffic pulsing
I have tried across three different protocols now. here is a screen shot of NFS. goes slow topping out about 6MB/s ** Attachment added: nfs transfer http://launchpadlibrarian.net/12172804/nfs%20transfer.png -- network traffic pulsing https://bugs.launchpad.net/bugs/194832 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 178799] package rhythmbox 0.11.4-0ubuntu1 failed to install/upgrade: subprocess post-installation script returned error exit status 134
Public bug reported: Binary package hint: rhythmbox I am using an AlphaV2 version of Hardy in VirtualBox. 512ram, 4gb hdd, everything else standard with hardy-alternate-i386.iso. this was a fresh install and i was just installing the updates when i received the error report, and reported it. ProblemType: Package Architecture: i386 Date: Wed Dec 26 22:54:06 2007 DistroRelease: Ubuntu 8.04 ErrorMessage: subprocess post-installation script returned error exit status 134 Package: rhythmbox 0.11.4-0ubuntu1 PackageArchitecture: i386 SourcePackage: rhythmbox Title: package rhythmbox 0.11.4-0ubuntu1 failed to install/upgrade: subprocess post-installation script returned error exit status 134 Uname: Linux ubuntu-hardy 2.6.24-2-generic #1 SMP Fri Dec 14 00:02:38 GMT 2007 i686 GNU/Linux ** Affects: rhythmbox (Ubuntu) Importance: Undecided Status: New ** Tags: apport-package -- package rhythmbox 0.11.4-0ubuntu1 failed to install/upgrade: subprocess post-installation script returned error exit status 134 https://bugs.launchpad.net/bugs/178799 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 178799] Re: package rhythmbox 0.11.4-0ubuntu1 failed to install/upgrade: subprocess post-installation script returned error exit status 134
** Attachment added: Dependencies.txt http://launchpadlibrarian.net/11071122/Dependencies.txt ** Attachment added: DpkgTerminalLog.txt http://launchpadlibrarian.net/11071123/DpkgTerminalLog.txt -- package rhythmbox 0.11.4-0ubuntu1 failed to install/upgrade: subprocess post-installation script returned error exit status 134 https://bugs.launchpad.net/bugs/178799 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 173302] Re: (HARDY) Cannot add background in appearance background
i confirm i am having the same trouble with hardy. i can change the background from the solid colour (default) to the brown elephant skin. however when clicking 'add' then selecting a suitable image file, it does not appear in the available backgrounds. [EMAIL PROTECTED]:~$ uname -a Linux ubuntu-laptop 2.6.24-2-generic #1 SMP Thu Dec 20 17:36:12 GMT 2007 i686 GNU/Linux -- (HARDY) Cannot add background in appearance background https://bugs.launchpad.net/bugs/173302 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 72468] Re: Trash looks empty, isn't
i am having the same problem with Hardy Alpha 2. fresh install with no specialised partitioning at all. the deleted items applet looks empty, however /home/james/.Trash is non-empty. [EMAIL PROTECTED]:~$ uname -a Linux ubuntu-laptop 2.6.24-2-generic #1 SMP Thu Dec 20 17:36:12 GMT 2007 i686 GNU/Linux -- Trash looks empty, isn't https://bugs.launchpad.net/bugs/72468 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 178484] changes to groups via GUI don't stick
Public bug reported: to reproduce exactly: System Administration Users and Groups Unlock Manage Groups amend user to group i think confirm/close dialogue windows, log out, log in, and the change has been reversed. ** Affects: ubuntu Importance: Undecided Status: New ** Visibility changed to: Public -- changes to groups via GUI don't stick https://bugs.launchpad.net/bugs/178484 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 178484] Re: changes to groups via GUI don't stick
i should have mentioned i am using Hardy Alpha 2: [EMAIL PROTECTED]:~$ uname -a Linux ubuntu-laptop 2.6.24-2-generic #1 SMP Thu Dec 20 17:36:12 GMT 2007 i686 GNU/Linux -- changes to groups via GUI don't stick https://bugs.launchpad.net/bugs/178484 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 39326] Re: installer: dm-crypt support missing
Well had a look, works fine. Use the alternative CD and select manual partitioning i had one normal /boot then the the rest as type encrypted, the rest is obvious, works well! thank you! On 03/10/2007, Charles Sullivan [EMAIL PROTECTED] wrote: Thanks to whoever made this happen.. I'll test once Gutsy is out of beta. On 9/28/07, webjames [EMAIL PROTECTED] wrote: Brilliant, i shall have a look at once! On 28/09/2007, feistytester9 [EMAIL PROTECTED] wrote: it seems that installation on encrypted devices is now included by default. the alternate install cd for gutsy beta can create encrypted devices. -- installer: dm-crypt support missing https://bugs.launchpad.net/bugs/39326 You received this bug notification because you are a direct subscriber of the bug. -- Tel: 00447809457487 Email: [EMAIL PROTECTED] www: http://www.happyjames.co.uk -- installer: dm-crypt support missing https://bugs.launchpad.net/bugs/39326 You received this bug notification because you are a direct subscriber of the bug. -- Charles Sullivan [EMAIL PROTECTED] -- installer: dm-crypt support missing https://bugs.launchpad.net/bugs/39326 You received this bug notification because you are a direct subscriber of the bug. -- Tel: 00447809457487 Email: [EMAIL PROTECTED] www: http://www.happyjames.co.uk -- installer: dm-crypt support missing https://bugs.launchpad.net/bugs/39326 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
Re: [Bug 39326] Re: installer: dm-crypt support missing
Brilliant, i shall have a look at once! On 28/09/2007, feistytester9 [EMAIL PROTECTED] wrote: it seems that installation on encrypted devices is now included by default. the alternate install cd for gutsy beta can create encrypted devices. -- installer: dm-crypt support missing https://bugs.launchpad.net/bugs/39326 You received this bug notification because you are a direct subscriber of the bug. -- Tel: 00447809457487 Email: [EMAIL PROTECTED] www: http://www.happyjames.co.uk -- installer: dm-crypt support missing https://bugs.launchpad.net/bugs/39326 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 83178] Re: [feisty] nm-applet claims wired connection when its wireless
I can confirm with the latest gutsy with all upgrades as of 14th Sept wireless works but is reported as a wired network by nm-applet, this wasn't the case before recent updates. wireless card is Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) -- [feisty] nm-applet claims wired connection when its wireless https://bugs.launchpad.net/bugs/83178 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 127335] Re: backlight on Lenovo 3000 C200 can't be set to maximum again
I have a thinkpad T41, and have the same issue as described above. EXCEPT when i turn backlight down from 5 goes straight to 1, then can change it between 1 and 2, but no further. the gnome-power-manager slider works but only if i drag it to minimum then up to maximum. this can only be a temporary solution though. I would guess this issue might effect more laptop than these. -- backlight on Lenovo 3000 C200 can't be set to maximum again https://bugs.launchpad.net/bugs/127335 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 39326] Re: installer: dm-crypt support missing
i don't believe it is because of lack of interest; more that people just haven't started anything yet. debian has the feature of encryption on the installer, and it works very well. i have followed this howto: (https://help.ubuntu.com/community/FeistyEncryptedRootWithInstaller) and now have encryption on my laptop, it can't be that difficult to implement, i guess we just need to stir up some interest and attention. perhaps someone could alert the mailing list? -- installer: dm-crypt support missing https://bugs.launchpad.net/bugs/39326 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 39326] Re: installer: dm-crypt support missing
Well dm-crypt is still missing from the installer in Feisty, and seems to be missing in Gutsy i can see not plans to include it in the upcoming Gutsy. Perhaps if we make the need for encryption better known? -- installer: dm-crypt support missing https://bugs.launchpad.net/bugs/39326 You received this bug notification because you are a member of Ubuntu Bugs, which is a direct subscriber. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 99933] Re: enable desktop effects crashes system
Hello, I am having exactly the same problem,i know that i do need to restricted drivers, and a know that they are enabled and working (i have run glxgears -info) and i get ~4000fps with my Nvidia 6600. however when i click restricted driver management it tells me: your hardware does not need any restricted drivers This is blatantly not true. i think it might have something to do with the direct rendering: [EMAIL PROTECTED]:~$ xdriinfo Xlib: extension XFree86-DRI missing on display :0.0. Screen 0: not direct rendering capable. hope this helps, -- enable desktop effects crashes system https://bugs.launchpad.net/bugs/99933 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 102587] Re: restricted-manager reports Your hardware does not need any restricted drivers.
*** This bug is a duplicate of bug 93209 *** https://bugs.launchpad.net/bugs/93209 i have a 6600: Hello, I am having exactly the same problem,i know that i do need to restricted drivers, and a know that they are enabled and working (i have run glxgears -info) and i get ~4000fps with my Nvidia 6600. however when i click restricted driver management it tells me: your hardware does not need any restricted drivers This is blatantly not true. i think it might have something to do with the direct rendering: [EMAIL PROTECTED]:~$ xdriinfo Xlib: extension XFree86-DRI missing on display :0.0. Screen 0: not direct rendering capable. also when i start beryl, i just get a white screen. hope this helps, ** Changed in: restricted-manager (Ubuntu) Status: Unconfirmed = Confirmed -- restricted-manager reports Your hardware does not need any restricted drivers. https://bugs.launchpad.net/bugs/102587 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
[Bug 96832] Re: does not offer driver for GeForce 6800
*** This bug is a duplicate of bug 93209 *** https://bugs.launchpad.net/bugs/93209 i have a 6600 with the same problem: [EMAIL PROTECTED]:~$ lspci | grep VGA 01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600 PCIe] (rev a2) [EMAIL PROTECTED]:~$ lspci -n | grep 0300 01:00.0 0300: 10de:0142 (rev a2) [EMAIL PROTECTED]:~$ gksu restricted-manager modinfo: could not open /lib/modules/2.6.20-15-generic/volatile/nvidia.ko: No such file or directory modinfo: could not open /lib/modules/2.6.20-15-generic/volatile/nvidia.ko: No such file or directory hope this helps. -- does not offer driver for GeForce 6800 https://bugs.launchpad.net/bugs/96832 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs