How to reproduce this:
1) go to /etc/init.d
2) rename mountall.sh to disabled-mountall.sh
So perhaps a broken symlink in the /etc/rc* levels causes this?
Should be fairly easy to verify for the people affected.
--
You received this bug notification because you are a member of Ubuntu
Bugs,
I have noticed that if the machine has been shut down uncleanly, then
the success rate of it getting to boot normally is nearly 100%. Must
have to do something with fsck delaying the startup sequence enough for
this bug not to trigger?
--
You received this bug notification because you are a
** Changed in: ubuntu
Assignee: Anatoli Yakimovich (akelav) => (unassigned)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
Happened to me too, and too after upgrade from 15.10 to 16.04. Since
we're using crypttab with the keyscript= option, we can't yet use
systemd, and it seems like the system affected can boot once in ~5 times
fine, suggesting there is indeed a race condition somewhere inside
upstart (?)
Despite
Happened to me after upgrading from 15.10 to 16.04.
"broken pipe", can't boot. Intel graphics.
Problem occurs only if boot with Upstart (Systemd doesn't suffer) !
It seems like there are rase conditions somewhere because after all day of
unsuccessful battle it's turned out that sometimes system
Re #75 (Paul Abrahams): the message in #37 is both "Could no open
output pipe" and "broken pipe"
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from
Hi, To all i am still seeing this error, I am a developer for a linux operating
system called: The Linux Schools Project. I maintain the client and i am seeing
this error when I try and boot the new version i am creating! My output from
cat /var/log/syslog | grep pipe, is the same as everyone
Same error after upgrading Xubuntu 14.04 to 14.10 with Intel integrated
graphics. Also present on 15.04.
This issue does not prevent my computer from booting successfully, but
it does add an eight-second delay to the boot process:
...
[3.500278] acer_wmi: Disabling ACPI video driver
[
This problem still exists in the UBUNTU 15.04 x64 bit version.
I tried the above advised fix but it did not solved my problem. :(
I am using NVIDIA 346.59 driver
Please somebody find the solution.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
I experienced this problem today on my Dell Latitude D630 laptop with a fresh
install of Ubuntu 14.10, installed today. The problem came up immediately after
I installed Intel GM 965 Graphics driver intel-linux-graphics
installer_1.0.8-0intel1_amd64.deb
When I shut down my laptop following
This bug still occurs with nvidia-graphics-drivers-304 as with nvidia-
graphics-drivers-304-updates and nvidia-graphics-drivers-331. It's not
visible though and you have to do a 'cat /var/log/syslog|grep pipe' to
see it.
--
You received this bug notification because you are a member of Ubuntu
This bug doesn't affect nvidia-graphics-drivers-304 : fews persons have
reported it with Intel or AMD chipsets
** Package changed: nvidia-graphics-drivers-304 (Ubuntu) = ubuntu
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Commenting out:
# daemon.*;mail.*;\
# news.err;\
# *.=debug;*.=info;\
# *.=notice;*.=warn |/dev/xconsole
in /etc/rsyslog.d/50-default.conf did not work for me on Xubuntu 14.10, however
doing the following did work:
terminal code:
sudo mknod -m 640 /dev/xconsole p
sudo chown root:adm
Init error reading from descriptor:Broken pipe.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage notifications about
I'm also having this in ubuntu Gnome 14.10 64bit and when I opened the link
apeared in the log by this command :
--
cat /var/log/syslog|grep pipe
init: Error while reading from descriptor: Broken pipe
rsyslogd-2039: Could no open output pipe
I'm also having this. It started on 14.04 but has got significantly
worse on the upgrade to 14.10 - it is intermittent. It would happen only
occasionally on 14.04 but now happens almost all the time on 14.10. I
have nVidia graphics but am using nouveau. What's particularly bad about
this in my
In Ubuntu 14.10 x64 with nvidia 346.47 also this problem
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage notifications
Im also having similar problem . Initally due to display driver update
but then it effected with failure on the display - blank screen, then
fail to login at terminal (looping) then missing launcher-desktop.. now
is like total unusable.
--
You received this bug notification because you are a
Installing thermald:
no change either.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage notifications about this bug go
I installed thermald too, doesn't change anyhting on my system.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage
Hey, I have the same problem and are looking for a solution as well. I
am not sure if you need more system/hardware informations. I added the
dmesg output anyway.
I have the same error with ubuntu 14.04, ubuntu 14.10 and I tried Linux
Mint (with is the same then ubuntu 14.04) as well. Just on
For fix this error need install thermald.
apt-get install thermald linux-image-generic
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor:
I have thermald installed.
On Sun, 08 Feb 2015, 15:20 Folour fol...@ya.ru wrote:
For fix this error need install thermald.
apt-get install thermald linux-image-generic
--
You received this bug notification because you are subscribed to the bug
report.
what to do avoid this problem
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage notifications about this bug go to:
what to do avoid this problem
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage notifications about this bug go to:
Graphics are set to low during bootsplash. Follow these steps to fix:
http://www.binarytides.com/ubuntu-fix-nvidia-graphics/
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init:
thanks for your suggestions ! will try as soon as I am back home at my PC
:-)
On Mon Feb 02 2015 at 19:35:37 Todd Stoffel toddstof...@icloud.com
wrote:
Graphics are set to low during bootsplash. Follow these steps to fix:
http://www.binarytides.com/ubuntu-fix-nvidia-graphics/
--
You
Re #74:
The message also occurs on my freshly installed 14.10.
My system is working fine after this message too.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while
Re #74 (Roland Meier): the message in #37 is Could no open output
pipe, which is somewhat different from the broken pipe message.
Interestingly, I've also seen the broken pipe message in an older 13.10
system, which brought up the graphical interface but froze after a
while.
--
You received this
Paul (#69), for me the message occurrs in a freshly installed 14.10 system
(which boots fine after the message).
I think there may be multiple conditions for the error message (broken pipe),
some possibly related to the nvidia driver (according to the position in the
message log, see #37),
Paul, My problem occurred when upgrading from 14.04 to 14.10. I
definitely are agree with post #70!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from
my problem occurred upgrading in 14.10 doing a regular Ubuntu base
upgrade
On Wed, Jan 28, 2015 at 12:10 PM, Ron Tharp lowri...@att.net wrote:
Paul, My problem occurred when upgrading from 14.04 to 14.10. I
definitely are agree with post #70!
--
You received this bug notification because
I have got this problem upgrading three machines from Ubuntu 14.04 to
14.10, two nVidia, one AMD. It's now not possible to log into the AMD
one - the desktop is missing and the system is frozen not responding to
anything. I have switched to XFCE on that machine and its working fine.
The nVidia
Intel graphics with the same problem. Anyone find a solution?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage
I just upgraded a system from Kubuntu 14.04 to Kubuntu 14.10, and the
broken pipe error popped up. Some questions for the suffering
populace:
1. Does the error occur with 14.04 or only with 14.10?
2. Does it occur with 14.10 installed directly or only with 14.10
upgraded from 14.04?
In my
The keepers of the archive need to do something about this bug to
reflect the fact that it is not Nvidia-specific. Several people have
reported encountering it with Intel hardware.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
With nvidia package on 14.10, I have the same message.
I can't boot anymore.
(note that at installation I had to use the nomodeset parameter, otherwise
the screen would have been broken the same)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed
My System also shows this error, is able to boot though, but with messed up
hyprid text and logo splash.
I'm experiencing this ever since I upgraded to Utopic from Trusty. I'm using
fglrx-updates ATI drivers.
Since, it also shows the following errors when I log in via tty1 in text mode,
and
this bug affect me to. i've a nvidia video card and use binary driver
v331.113. Have you got any information for resolve it ? thanks
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
i have to machines both runnning 14.10 , both nvidia cards
1 machine cannot be used anymore , black screen and broken pipe,
1 machine shows broken pipe and then boots after all into a working screen
??
On Thu, Jan 15, 2015 at 10:46 AM, Samueldasilva5448
1364...@bugs.launchpad.net wrote:
this
my unit boot after this error message and no problem after log in on my
ubuntu linux system but it is a strange error message
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init:
Kubuntu 14.10. Linux 3.19RC4 x86_64. Just restarted my machine after
full freeze (because of buggy video decode hardware acceleration
testing) when broken pipe error appeared during boot.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
BTW, I have no problems with CPU microcode and I have no Intel videos on
my machine - only AMD (HD2600XT).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading
Restarted my machine again and no more broken pipe message at boot.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage
** Also affects: nvidia-graphics-drivers-340 (Ubuntu)
Importance: Undecided
Status: New
** No longer affects: nvidia-graphics-drivers-340 (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I.ve installed the 20140923 microcode update. It solved the buffer
underrun problem I was having but not the broken pipe problem. The
reason I thought it would help is that I saw a post somewhere saying
that this update worked but the previous one (20140624) did not. I've
been trying without
Why do you think it comes from intel-microcode?
You can find the built packages here :
amd64
https://launchpad.net/ubuntu/+source/intel-microcode/2.20140913.1ubuntu2/+build/6387490/+files/intel-microcode_2.20140913.1ubuntu2_amd64.deb
i386
After poking around I learned that the cure is to install a correction
to the Intel microcode. That in turn requires installing theintel-
microcode 2.20140913.1ubuntu2 source package, which is available from
Launchpad. However, I haven't yet figured out how to actually do that.
The Archlinux
This bug report is mistitled since the same bug appears on machines
(like mine) with Intel integrated graphics.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while
i just installed the 3.18 kernel and still get the broken pipe.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage
I too get this message in Kubuntu 14.10. I have a Lenovo laptop with
Intel integrated graphics.
I actually have two Kubuntu 14.10's in different partitions on this
machine. I'm writing this from what I'll call P1, which I had abandoned
because the partition was too small for my needs. So I
Same message here but somewhat different dmesg output.
I'm running 14.10 upgraded from 14.04, and nvidia binary driver 331.113
dmesg (excerpted):
...
init: plymouth-upstart-bridge main process (294) killed by TERM signal
(the *only* mention of plymouth)
... then much later...
Disabling lock
I'm not sure if this is correct forum protocol but I'd like to add info
to my previous post about substituting the Nouveau drivers for the
proprietary Nvidia drivers in Lubuntu 14.10 with Nvidia GeForce 7300GS
drivers. As stated that eliminated the broken pipe error, but I've
since upgraded the
Most of this is way over my head. Man, do I envy and admire all you who are
light years ahead of this 59 yr. old who never touched a computer until a few
yrears ago. I'm posting this for the many newbie users out there like me.
I too was getting the init: Error while reading from descriptor:
Two months without Linux. I have the next errors:
systemd-logind[931]: Failed to start unit user@1000.service: Unknown unit:
user@1000.service
systemd-logind[931]: Failed to start user service: Unknown unit:
user@1000.service
Should I reinstall the OS? :(
--
You received this bug
Happens even without nvidia graphics as error appears on intel
integrated graphics
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken
Again, not related to nVidia - happens on my Intel graphics on 14.10
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage
+1 Xubuntu 14.10
with kernel
3.18.0-031800-generic #201412071935 SMP Mon Dec 8 00:36:34 UTC 2014 x86_64
x86_64 x86_64 GNU/Linux
** Changed in: upstart
Status: New = Confirmed
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Maybe
-8-
rsyslogd-2039: Could no open output pipe '/dev/xconsole': No such file or
directory [try http://www.rsyslog.com/e/2039 ]
-8-
has something to do with this?
https://bugs.launchpad.net/ubuntu/+source/rsyslog/+bug/459730/comments/33
seems to not only resolve this rsyslogd-warning, but
** Changed in: nvidia-graphics-drivers-304 (Ubuntu)
Assignee: (unassigned) = Anatoli Yakimovich (akelav)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading
this started 12-13-2014 after Ubuntu 14.10 regular system update which also
incorporated nvidia update.
i now have a black screen and broken pipe !
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
+1 lubuntu used
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage notifications about this bug go to:
I think I have this bug too on 14.10 and it makes the boot process to hang.
So I have to boot in single user mode and launch networking and then resume to
get to the desktop.
I don't have any nvidia driver though.
--
You received this bug notification because you are a member of Ubuntu
Bugs,
I have the same problem, and do not have nVidia. I have the Intel
Graphics i915 driver. (14.10 Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from
I have no nVidia, only AMD and broken pipe massage during booting
Linux 3.18RC6 also still is. What does this have to Nvidia? о_О
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init:
please, how to solve it? i can't change default programs, icon size's, and
other things:
14.946173] init: Error while reading from descriptor: Broken pipe
[ 16.779514] systemd-logind[993]: Failed to start unit user@111.service:
Unknown unit: user@111.service
[ 16.779520]
Added upstart to affected software. Reason: mentioned in dupe #1389044.
** Also affects: upstart
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
I'm using Nvidia card version 331.104 (open source) and I have this
problem.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To
Nov 15 12:36:51 hp8740w kernel: [ 19.613358] nvidia: module verification
failed: signature and/or required key missing - tainting kernel
Nov 15 12:36:51 hp8740w kernel: [ 19.618671] vgaarb: device changed decodes:
PCI::01:00.0,olddecodes=io+mem,decodes=none:owns=none
Nov 15 12:36:51
Wish I knew *WHERE* this error while reading message comes from!
init can mean quite a lot.
On Ubuntu flavors, /sbin/init is actually init from upstart package.
But just FWIW, I've grep'd recursively (-ir) for both broken pipe and
error while reading messages. None there.
So this init: Error
Wait...
Found a match on this error message in 'io.c' which is part of libnih, which on
its part is needed by /sbin/init.
So if anyone wants to debug the reason of this, he should start debugging
libnih (even adding a printf will do to see what's going on) and check what
(illegal?) parameter
I upgraded from Ubuntu 14.04 to 14.10 and I also get this warning.
I am using an NVIDIA card too.
AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ × 2 4 Gio memory
GeForce 7300 GT/PCIe/SSE2
[0.997148] Corrupted low memory at 8800fe68 (fe68 phys) = 38a210
[0.997199] Memory
I upgraded from Kubuntu 14.04 to 14.10 and I am, too, affected by this.
I do wear the nvidia drivers, but I can't seem to correlate this issue
with the drivers. Although, this message appears on my start up screen,
I can actually log in and work like I usually do without any glitches.
:/
--
You
Hello
I upgraded from Ubuntu 14.04 to 14.10 yesterday and I also get this warning.
I am using an NVIDIA card too.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while
I have AMD graphic driver FGLRX-update ! and i have the same problèm !
it' not a problem Nvidia Driver
ubuntu 14.10 utopic Unicorn sous Unity 7.3.1 winows manager : compiz
xorg 1.16.0
Binutils 2.24.90.2141014 gcc 4.9.1Linux C Lib 2.19
GNU Make 4.0
Intel proc i7
I have the same problem. Two weeks with out Linux :(
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage notifications
1364630] Re: init: Error while reading from
descriptor: Broken pipe
I have the same problem. Two weeks with out Linux :(
--
You received this bug notification because you are subscribed to the bug
report.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor
Apologies - ignore my last.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage notifications about this bug go to:
I'm not using DHCP on Utopic and I am getting the error. On my desktop I
am using nVidia drivers and I get the error, on an Intel laptop I also
get the error.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
I can make it disappear, but I'm not sure what is the real cause :
$ sudo sed -i s,or starting rc-sysinit,or spawned rc-sysinit,
/etc/init/failsafe.conf
A patch in failsafe.conf and its gone.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I don't have nvidia driver nor nvidia anything.
This bugreport is in wrong place, it affects others as well, not the
nvidia-driver.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
In my experience this bug will occur in Utopic (not in Trusty) upstart network
initializaton, if DHCP is set ( not static )
It has nothing to do with the display drivers.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
yes, same here - Trusty was OK, error only started in Utopic, and I'm
using DHCP.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
I just got this again with Utopic Mate Remix and I have 331.89 Nvidia
drivers installed.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor:
I don't have Nvidia graphics but I still get this error
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage notifications
Affects multiple flavours.
** Project changed: ubuntu-gnome = ubuntu
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage
** Package changed: ubuntu = nvidia-graphics-drivers-304 (Ubuntu)
** Changed in: nvidia-graphics-drivers-304 (Ubuntu)
Importance: Undecided = Critical
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
** Changed in: nvidia-graphics-drivers-304 (Ubuntu)
Importance: Critical = High
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken
Appeared after installing nvidia 331 drivers
** Package changed: init-system-helpers (Ubuntu) = ubuntu-gnome
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to init-system-helpers in Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Appeared after installing nvidia 331 drivers
** Package changed: init-system-helpers (Ubuntu) = ubuntu-gnome
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading
From dmesg|grep pipe :
[4.615130] random: nonblocking pool is initialized
[6.403587] init: plymouth-upstart-bridge main process (173) terminated with
status 1
[6.403597] init: plymouth-upstart-bridge main process ended, respawning
[6.404797] init: plymouth-upstart-bridge main
From dmesg|grep pipe :
[4.615130] random: nonblocking pool is initialized
[6.403587] init: plymouth-upstart-bridge main process (173) terminated with
status 1
[6.403597] init: plymouth-upstart-bridge main process ended, respawning
[6.404797] init: plymouth-upstart-bridge main
Can confirm, this messes up my Plymouth splash also.
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to init-system-helpers in Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken
Confirmed. It seems to be something to do with xconsole :
one@one-P35:/var/log$ cat syslog|grep pipe
Oct 24 12:17:24 one-P35 rsyslogd-2039: Could no open output pipe
'/dev/xconsole': No such file or directory [try http://www.rsyslog.com/e/2039 ]
Oct 24 12:26:58 one-P35 kernel: [ 24.812375]
Can confirm, this messes up my Plymouth splash also.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken pipe
To manage notifications
Confirmed. It seems to be something to do with xconsole :
one@one-P35:/var/log$ cat syslog|grep pipe
Oct 24 12:17:24 one-P35 rsyslogd-2039: Could no open output pipe
'/dev/xconsole': No such file or directory [try http://www.rsyslog.com/e/2039 ]
Oct 24 12:26:58 one-P35 kernel: [ 24.812375]
Came up after installing the nvidia 331.89 driver from the Driver tool,
in Ubuntu Gnome 14.10
** Also affects: ubuntu-gnome
Importance: Undecided
Status: New
** No longer affects: ubuntu-gnome
--
You received this bug notification because you are a member of Ubuntu
Server Team, which
This also happens on systems that neither have nvidia graphic cards nor
the nvidia driver installed
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to init-system-helpers in Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init:
Uhm erong bug report. Disregard my last comment please
--
You received this bug notification because you are a member of Ubuntu
Server Team, which is subscribed to init-system-helpers in Ubuntu.
https://bugs.launchpad.net/bugs/1364630
Title:
init: Error while reading from descriptor: Broken
Came up after installing the nvidia 331.89 driver from the Driver tool,
in Ubuntu Gnome 14.10
** Also affects: ubuntu-gnome
Importance: Undecided
Status: New
** No longer affects: ubuntu-gnome
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
1 - 100 of 106 matches
Mail list logo
