I'm doing some tests with CONFIG_USB_ANNOUNCE_NEW_DEVICES set. First
test is on a 11.10 kernel from -updates and modules btusb ath3k
blackloaded and manually modprobed. dmesg says:
[2.191737] usb 2-1.5: new full speed USB device number 3 using ehci_hcd
[2.284292] usb 2-1.5: New USB device
** Changed in: linux (Ubuntu Maverick)
Status: In Progress => Fix Committed
** Changed in: linux (Ubuntu Maverick)
Status: Fix Committed => Won't Fix
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad
** Changed in: linux (Ubuntu Precise)
Assignee: (unassigned) => AceLan Kao (acelankao)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/714862
Title:
Atheros AR3002 cannot be turned up/is not reco
Hi Michael,
Thanks for doing such extensive testing! Would you please attach the
dmesg logs from your experiments?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/714862
Title:
Atheros AR3002 cannot
This is still an issue on Precise Pangolin with kernel
3.2.0-8-generic #15
The message is the same
Bluetooth: Atheros AR30xx firmware driver ver 1.0
Bluetooth: Can't change to loading configuration err
ath3k: probe of 2-1.5:1.0 failed with error -32
usbcore: registered new interface driver ath3k
** Also affects: linux (Ubuntu Maverick)
Importance: Undecided
Status: New
** Changed in: linux (Ubuntu Maverick)
Status: New => In Progress
** Changed in: linux (Ubuntu Maverick)
Importance: Undecided => High
--
You received this bug notification because you are a member of
I've got Acer TimelineX 3820TG with Atheros 3011 on Oneiric.
Bluetooth worked fine all the time with 2.6.38 kernels but witht 3.x it doesn't.
With ar3011-dkms_1.1ryu2.3_all.deb
3.0.0-15-generic - oneiric upstream - after boot - doesn't work - after
hibernation - turns up fine
3.2.0.999-generic - f
hi guys
on notebook Dell Vostro 3750
0cf3:3002 Atheros Communications, Inc.
Dell Travel Mouse
ocelot oneiric 11.10 64 bit
kernel 3.0.0-14-generic
connection with bluetooth is ok AFTER i have installed
ar3011-dkms_1.1ryu2.3_all.deb (with gdebi)
this install also dkms, fakeroot, patch, like depend
Can anybody confirm that A2DP works after installing
ar3011-dkms_1.1ryu2.3_all.deb?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/714862
Title:
Atheros AR3002 cannot be turned up/is not recognized.
On the Dell Inspiron Duo, Ubuntu 11.10 32bit I found this:
lsusb -> 0cf3:3002 Atheros Communications, Inc.
hciconfig --all -> No BD address
sudo sdptool browse (found in bluez packet) -> fail
I installed dkms from repository and ar3011-dkms_1.1ryu2.3_all.deb from
this page. Reboot.
After that ev
Thanks, work well for me with Ubuntu 11.10 on Dell Vostro 3350.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/714862
Title:
Atheros AR3002 cannot be turned up/is not recognized.
To manage notificat
Priyank,
The solution for now is to install the dkms package,
ar3011-dkms_1.1ryu2.3_all.deb.
You can find it on the right side.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/714862
Title:
Atheros
I'm using a Dell Vostro V130 laptop with Ubuntu 11.10 installed on it.
I'm experiencing the same bluetooth problem on my computer. As I'm new
to Ubuntu, I haven't brought myself to grips with it...could someone
help me with my problem given my lack of experience?
--
You received this bug notifica
James,
Sorry, I didn't followup this issue for a while.
The atheros' engineer is in charge of making the code upstream and he said he
already done that.
>From what I see, there are 2 kind of chips with the same VID/PID(0cf3:3002)
>and the code in upstream kernel can enable another chip, but not
Hi AceLan,
What's the upstream status? Is there an alternative because the upstream
hackers didn't like the first patch or did they offer any other possible
ways to fix? Maintenance out of tree might get expensive after a while.
** Tags added: patch-rejected-upstream
--
You received this bug no
affects me too. I just installed a USB bluetooth dongle with the AT3011
chipset on it, but it is not recognized :( this is on 11.10.
when plugging in the USB bluetooth dongle, I get the following in
syslog:
Nov 18 18:58:17 rakku kernel: [633881.104241] usb 9-1: new full speed USB
device number 2
I'm having trouble with an AR3012 under Oneric (amd64): Linux (and the
GUI notification-area tool) recognize the chipset, but scans for devices
always fail.
I have a Pavilion g4 with a Bluetooth chip that Win7 reports as "Atheros
AR3012 Bluetooth 4.0 + HS". I tried installing the
ar3011-dkms_1.1r
How is the state of this bug?
I asked Leann to drop "UBUNTU: SAUCE: Revert "Bluetooth: Add new PID for
Atheros 3011" from Precise, since this revert didn't propagated upstream
- we applied it from the bluetooth's maintainer tree - and there is
reports of people effectively needing that in the kern
** Also affects: linux (Ubuntu Precise)
Importance: Undecided
Status: New
** Changed in: linux (Ubuntu Precise)
Status: New => In Progress
** Changed in: linux (Ubuntu Precise)
Importance: Undecided => High
** Tags removed: rls-mgr-o-tracking
** Tags added: rls-mgr-p-tracking
** Changed in: linux (Ubuntu Oneiric)
Milestone: None => oneiric-updates
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/714862
Title:
Atheros AR3002 cannot be turned up/is not recognized.
To man
** Changed in: linux
Status: Unknown => Confirmed
** Changed in: linux
Importance: Unknown => Medium
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/714862
Title:
Atheros AR3002 cannot be t
** Bug watch added: Linux Kernel Bug Tracker #42442
http://bugzilla.kernel.org/show_bug.cgi?id=42442
** Also affects: linux via
http://bugzilla.kernel.org/show_bug.cgi?id=42442
Importance: Unknown
Status: Unknown
--
You received this bug notification because you are a member of U
** Tags added: rls-mgr-o-tracking
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/714862
Title:
Atheros AR3002 cannot be turned up/is not recognized.
To manage notifications about this bug go to:
htt
** Tags added: blocks-hwcert-enablement
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/714862
Title:
Atheros AR3002 cannot be turned up/is not recognized.
To manage notifications about this bug go t
** Tags added: oneiric
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/714862
Title:
Atheros AR3002 cannot be turned up/is not recognized.
To manage notifications about this bug go to:
https://bugs.l
Hi I have a Kogan Agora pro with a Atheros AR3011 running oneiric I'm
new to linux but this bug seems to be like my problem. I have just
upgraded to alpha 3 and setup a dual-boot with natty, if I first boot
into natty then restart and boot oneiric my bluetooth works, but if I
boot straight into one
Chris,
Yes, it's still a issue.
Looks like there are two kind of behavior of 0cf3:3002 chip, and DW1702 is the
one that can't use general way to load the firmware.
I still have no idea how to make it work except using DKMS.
--
You received this bug notification because you are a member of Ubunt
Just noting the final few comments in:
https://bugzilla.kernel.org/show_bug.cgi?id=27402 speak to the remaining
issue here
** Bug watch added: Linux Kernel Bug Tracker #27402
http://bugzilla.kernel.org/show_bug.cgi?id=27402
--
You received this bug notification because you are a member of Ubu
Tomasz,
Good to hear that you can confirm the next kernel release can fix the
suspend/resume problem.
And for the "leave active bluetooth connection while putting computer into
suspend" problem, I think it's a different problem and different bt chip with
this issue, so it's better to file a new
there is no need to restart service
sudo /etc/init.d/bluetooth start
helps, but you have to type it each time after waking up from suspend, when you
gonna suspend computer with active bluetooth connection (for example a2dp)
--
You received this bug notification because you are a member of Ubuntu
The bug is partly solved in 2.6.38-10 kernel - you dont have to restart
bluetooth after turning on and waking up. But if you gonna leave active
bluetooth connection while putting computer into suspend it still
occures - you cant turn bluetooth on via bluetooth manager and albueman
gonna be closed a
Tomasz,
Yes, we know this issue, and I believe this issue is fixed in next ubuntu
kernel.
BTW, before you have the new kernel installed, you can just restart the
bluetooth service to reactivate the bluetooth by
sudo service bluetooth restart
--
You received this bug notification because you
same bug is for intel 1030 bluetooth & wifi card on my dell vostro 3350
you can get the bluetooth working only after restarting computer - when you
suspend switch off or hibernate laptop you can't access it
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is s
** Changed in: linux (Ubuntu Natty)
Assignee: (unassigned) => AceLan Kao (acelankao)
** Changed in: linux (Ubuntu Natty)
Importance: Undecided => High
** Changed in: linux (Ubuntu Natty)
Status: New => In Progress
--
You received this bug notification because you are a member of
** Also affects: linux (Ubuntu Natty)
Importance: Undecided
Status: New
** Also affects: linux (Ubuntu Oneiric)
Importance: High
Assignee: AceLan Kao (acelankao)
Status: In Progress
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is s
Moving this task to 'In Progress' to keep track of the upstream bug.
** Changed in: linux (Ubuntu)
Status: Fix Committed => In Progress
** Changed in: linux (Ubuntu)
Importance: Undecided => High
** Changed in: linux (Ubuntu)
Assignee: (unassigned) => AceLan Kao (acelankao)
** Ta
I followed AceLan Kao's steps and got the bluetooth service working on
my V130, but the bluetooth applet icon in the panel was not visible. I
found this helpful in getting that to show up:
http://askubuntu.com/questions/40400/how-do-i-show-blueproximitys-icon-
in-the-panel
(had to restart sessi
** Tags added: blocks-hwcert
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/714862
Title:
Atheros AR3002 cannot be turned up/is not recognized.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.
Marcus, I followed the same steps as you did (rebooting and everything).
Now my bluetooth works. Fix confirmed to work.
I'm using 11.04 from an upgraded 10.10, obviously on a v130.
Thanks for the fix, guys. Hopefully this can be pushed upstream so that
other users don't have to struggle with it.
Marcus,
Very glad to hear the good news from you.
Remember to regrade the linux-headers once you upgrade the linux-image, so that
dkms works.
Yes, it's still a problem we are currently working on and hope it could
be solved in the upstream kernel soon.
** Changed in: linux (Ubuntu)
Sta
AceLan Kao,
Thank You! Wow, thank you!
I followed your steps as such:
1. This was taken care of already, by upgrading to 11.04 stable...I did a
uname-r, and it showed the 2.6.38.8 kernel.
2. Followed your instructions on these steps to the letter.
3. Ran dkms status and saw the info listed, j
Marcus,
Ok, looks like the dkms package didn't install correctly and I think you
might want to try 110.04, so let's focus on 11.04 release.
1. install the latest kernel image and kernel header
sudo apt-get install linux-image-2.6.38-8-generic linux-headers-2.6.38-8
2. download dkms packages fr
"I'm not sure if you installed the dkms package correctly."
Quite possible, open to correction. BTW, for the heck of it, I
upgraded from 10.04 to 10.10 to 11.04, to see if anything changed. So
far, no good. The only thing that works is if I go to the Dell Recovery
Tool and restore the system t
Alexis,
You have the driver source after installing the dkms package.
The source code is located in /usr/src/ar3011-1.1ryu2.3/
It's hard to make it upstream, since it use different way to load the firmware.
Atheros's engineer had tried to propose this way to upstream but be rejected.
And there a
Marcus,
I'm not sure if you installed the dkms package correctly.
Could you paste the result of "dkms status" and "lsusb" here?
And try to make the module in "/usr/src/ar3011-1.1ryu2.3/ar3011-1.1ryu2.3/" and
paste the log as well.
** Changed in: linux (Ubuntu)
Assignee: (unassigned) => AceL
The issue is not in bluez but in the kernel drivers, so I'm reassigning
this to the right package.
There's another bug about this too, it's bug 720949.
** Package changed: bluez (Ubuntu) => linux (Ubuntu)
** Changed in: linux (Ubuntu)
Status: New => Confirmed
--
You received this bug no
Any way to get the source for this driver and recompile it for 32 bit
distributions? Or even better, send it upstream. @Marcus Sharp: I'm also
glad to see movement on this issue. I love my v130 and BT is the only
thing not working on it.
--
You received this bug notification because you are a mem
Thanks, but installing that did not solve the issue with either 10.04 (32
bit) or 11.04.
On Thu, Mar 17, 2011 at 2:20 AM, nexero <714...@bugs.launchpad.net> wrote:
> This also works for me (on Ubuntu 10.10 x64)..
> Thanks!
>
> --
> You received this bug notification because you are a direct subs
Does not resolve the 32-bit version of 10.04
Thanks for trying, though, I appreciate some movement.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/714862
Title:
Atheros AR3002 cannot be turned up/is
This also works for me (on Ubuntu 10.10 x64)..
Thanks!
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/714862
Title:
Atheros AR3002 cannot be turned up/is not recognized.
--
ubuntu-bugs mailing list
I have found a dkms-driver for the Atheros chipset on the recovery image
which I created from the pre-installed Ubuntu 10.04. Thus, I tried to
install it under Ubuntu 10.10 (64 Bit). The BT Device was recognized
immediately after the installation and still works fine for me.
** Attachment added: "
51 matches
Mail list logo
