Hi Daniel,
I have not seen this error for quite some time.
Thank you very much for your work.
Regards,
Jose.
On Sun, Nov 30, 2008 at 5:13 AM, Daniel T Chen <[EMAIL PROTECTED]> wrote:
> ** Visibility changed to: Public
>
> ** Changed in: gamix (Ubuntu)
> Status: New => Incomplete
>
--
I have finally found a place where to download an updated version of
Hugin (2019.2.0.6c8394bb3ce7). The preview windows are now correctly
_displayed_, but the drag functionality is not working fine.
Dragging on the right side of the image moves the image as if the mouse
were in the middle. Therefo
The same issue with the dragging also happens when trying to crop an
image. Basically, the detection of the position of the mouse pointer
within the image is incorrect in this version.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
ht
Public bug reported:
Nvidia driver 418 for Focal now installs version 430, which doesn't
support Kepler cards.
With my card (Nvidia GT 750M) I should be able to use version 418
(https://download.nvidia.com/XFree86/Linux-
x86_64/418.113/README/supportedchips.html).
However, the nvidia-driver-418
I have the same problem with Nvidia driver 390 and kernel 5.4.0:
Building for architecture x86_64
Building initial module for 5.4.0-14-generic
ERROR (dkms apport): kernel package linux-headers-5.4.0-14-generic is not
supported
Error! Bad return status for module build on kernel: 5.4.0-14-generic
Thanks! I can test it once I'm back I can try to figure out how to build
the application.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1852505
Title:
When using a hidpi screen the GL preview only u
Hi, I am back now. How can I test this? Are there instructions or a PPA
that I can use?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1852505
Title:
When using a hidpi screen the GL preview only use
Public bug reported:
After upgrade to the latest Ubuntu beta, gwenview is crashing with a
segmentation fault whenever I try to open a video.
ProblemType: Bug
DistroRelease: Ubuntu 20.10
Package: gwenview 4:20.08.1-1
ProcVersionSignature: Ubuntu 5.4.0-49.53-generic 5.4.65
Uname: Linux 5.4.0-49-gen
For anyone else with this issue, I was able to work around it by
switching from the VLC to the GStreamer backend for Phonon:
sudo apt-get install phonon4qt5-backend-gstreamer phonon4qt5settings
Then running:
/usr/bin/phononsettings
Finally go to the "Backend" tab, select "Phonon GStream
Marking the bug as Invalid since apparently that readme file only
applies to Windows.
Even the Linux driver 440 does in fact support support Kepler cards.
** Changed in: nvidia-graphics-drivers-418 (Ubuntu)
Status: New => Invalid
--
You received this bug notification because you are a me
Public bug reported:
The Additional Drivers windows (and the ubuntu-drivers command) in my
system only list nvidia-driver-390 and nvidia-340 for installation with
my Nvidia GeForce GT 750M.
However, there are newer versions that can be installed through the
Synaptic Package Manager and are compat
Apparently that README only refers to the Windows versions of the
driver: https://forums.developer.nvidia.com/t/geforce-700m-series-
support-for-vulkan-on-linux-64/118628/4
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.l
I can confirm that the bug is still present in LibreOffice 4.2.4, for
both Windows and Linux.
When the Changes toolbar is enabled, the buttons contained have no
icons, so the 6 buttons require half the width of the screen.
I'd say having a toolbar without icons is more of a bug than an
enhancemen
This is happening for me as well. I am using Ubuntu 16.04, GNOME 3.20,
nVidia GT750M with proprietary driver.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1573447
Title:
large jpeg file crashes Eye
Note, though that in my case I don't see any error if I launch it in a
terminal. The system halts for a few seconds while loading the file, and
then eog just crashes. It doesn't give me the chance to send an error
report.
--
You received this bug notification because you are a member of Ubuntu
Bu
Public bug reported:
Error upgrading packages.
ProblemType: Package
DistroRelease: Ubuntu 16.10
Package: g++-5 5.4.0-6ubuntu1
ProcVersionSignature: Ubuntu 4.4.0-34.53-generic 4.4.15
Uname: Linux 4.4.0-34-generic x86_64
NonfreeKernelModules: nvidia_uvm nvidia_drm nvidia_modeset nvidia
ApportVersio
Public bug reported:
On a fresh install of Ubuntu (tested with the current 16.10 alpha but
also occurred with earlier versions), the Browse mode of Gwenview shows
an error or does not work at all.
This can be easily solved by installing the kio and kinit packages, as
stated in https://bugs.kde.or
Maybe. Though, to be honest, I'd say the scanner works worse now than it
did some time ago. Now I cannot even get the first operation to work.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1532292
Tit
I think all of them. It used to work perfectly in my old, USB2-based
laptop; tested with Ubuntu until 14.10. But in the new laptop (which I
got in early 2015), it almost never worked fine with any Ubuntu version.
As part of bug https://bugs.launchpad.net/ubuntu/+source/sane-
backends/+bug/1250196,
It looks like there is no sane-backends package does no longer exist in
my system.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1532292
Title:
Mechanical part stops moving after each operation
To
I only get a message saying "No additional information collected".
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1532292
Title:
Mechanical part stops moving after each operation
To manage notificat
Upgraded to version 1.0.26-git20160712-yakkety0, as in
https://launchpad.net/~rolfbensch/+archive/ubuntu/sane-git. Same result
as a year ago: there is no physical response by the scanner.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Yeah that issue is mentioned in
https://bugs.launchpad.net/ubuntu/+source/apport/+bug/1656599
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1532292
Title:
Mechanical part stops moving after each ope
** Description changed:
- Gwenview is very when running in a Ubuntu on Wayland session.
+ Gwenview is very slow when running in a Ubuntu on Wayland session.
It takes many seconds every time I open an image or delete one. It works
flawlessly on Ubuntu on Xorg.
ProblemType: Bug
DistroR
Public bug reported:
Right now only flat maps are shown.
There is no topographic view, which is very important when viewing gpx
routes. Typically when viewing a gpx file one wants to see the elevation
lines, etc.
Ideally a satellite view should be supported as well.
ProblemType: Bug
DistroRelea
Public bug reported:
When using a HiDPI screen (3200x1800), maps appear blurry; as not using
the native resolution, but 1/2 -they are probably rendered at 1600x900-.
ProblemType: Bug
DistroRelease: Ubuntu 17.10
Package: gpxviewer 0.5.2-1
ProcVersionSignature: Ubuntu 4.13.0-16.19-generic 4.13.4
Un
Public bug reported:
It would be a great feature if gpxviewer could show a profile view of
the elevation of the path, either taking this from the gpx file itself,
or from other sources (DEM elevation data).
ProblemType: Bug
DistroRelease: Ubuntu 17.10
Package: gpxviewer 0.5.2-1
ProcVersionSignatu
Public bug reported:
Gwenview is very when running in a Ubuntu on Wayland session.
It takes many seconds every time I open an image or delete one. It works
flawlessly on Ubuntu on Xorg.
ProblemType: Bug
DistroRelease: Ubuntu 17.10
Package: gwenview 4:17.04.3-0ubuntu1
ProcVersionSignature: Ubuntu
In Ubuntu Xenial, with the proposed packages (1.2.0-0ubuntu0.16.04.3),
running with the laptop plugged I get:
$ sudo iwconfig wlan0 | grep "Power Management"
Power Management:off
And with the laptop unplugged:
$ sudo iwconfig wlan0 | grep "Power Management"
Power Management:o
And this is a org.kde.gwenviewrc when gwenview works fine.
** Attachment added: "org.kde.gwenviewrc when gwenview works fine"
https://bugs.launchpad.net/ubuntu/+source/gwenview/+bug/1633710/+attachment/4761508/+files/org.kde.gwenviewrc_fine
--
You received this bug notification because you a
Public bug reported:
Sometimes gwenview stops showing the title bar. It stays in a full
screen mode, where the menu bar is at the top, and the task bar is not
visible. But the button to come back from full screen is not visible, so
I am stuck in that mode.
Everytime this happens, I need to delete
Sorry, this is the right org.kde.gwenviewrc when the issue is present.
** Attachment added: "org.kde.gwenviewrc when the issue is present"
https://bugs.launchpad.net/ubuntu/+source/gwenview/+bug/1633710/+attachment/4761507/+files/org.kde.gwenviewrc_issue
--
You received this bug notification
Adding a screenshot of the issue
** Attachment added: "Screenshot of the issue"
https://bugs.launchpad.net/ubuntu/+source/gwenview/+bug/1633710/+attachment/4761515/+files/Screenshot%20from%202016-10-15%2013-41-42.png
--
You received this bug notification because you are a member of Ubuntu
Bu
*** This bug is a duplicate of bug 1529873 ***
https://bugs.launchpad.net/bugs/1529873
** This bug has been marked a duplicate of bug 1529873
gwenview package lacks some dependencies and fails to display pictures
--
You received this bug notification because you are a member of Ubuntu
Bug
Same issue with a Jiayu S2 phone and a Samsung Galaxy J5. If I leave
either of the phones connected I can get 100 message boxes popping up.
Thanks for the notification, I heard the first time. Funny thing is that
the phone actually mounts and I can transfer files just fine, but the
popups are annoy
Confirmed. Updating to Cinnamon 2.6 (using the PPA
ppa:moorkai/cinnamon), and executing the commands below, solved the
issue for me (after a restart).
gsettings set org.cinnamon.desktop.session settings-daemon-uses-logind true
gsettings set org.cinnamon.desktop.session session-manager-uses-logind
The issue could be related to upstream bugs
https://bugzilla.gnome.org/show_bug.cgi?id=645796 or
https://bugzilla.gnome.org/show_bug.cgi?id=735496
** Bug watch added: GNOME Bug Tracker #645796
https://bugzilla.gnome.org/show_bug.cgi?id=645796
** Bug watch added: GNOME Bug Tracker #735496
ht
The specific check seems to be this one: https://github.com/linuxmint
/cinnamon-session/blob/master/cinnamon-session/csm-systemd.c#L354
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1446276
Title:
S
As indicated in
https://github.com/linuxmint/Cinnamon/issues/4060#issuecomment-93941975,
Cinnamon tests for systemd-logind or old upower:
https://github.com/linuxmint/cinnamon-session/blob/master/cinnamon-
session/csm-logout-dialog.c#L190
Apparently, the new systemd-login is still not supported.
Public bug reported:
Had some issues, the computer locked a couple of times. May or may not
be related to this, as there was another error with Xorg.
ProblemType: KernelOops
DistroRelease: Ubuntu 15.10
Package: linux-image-4.2.0-12-generic 4.2.0-12.14
ProcVersionSignature: Ubuntu 4.2.0-12.14-gene
As requested, I just upgraded the BIOS from A08 to A09. I didn't update
before since I didn't think the problems mentioned in the release notes
applied to me:
Fixes
- Fixed System hang up after Touch Touchpad
- Fixed USB Test Fail
Enhancements
-Update Flash Utility
-Update SMBIOS type0 format for
Public bug reported:
Just upgrading some packages
ProblemType: Package
DistroRelease: Ubuntu 15.10
Package: kde-config-telepathy-accounts 4:15.08.1-0ubuntu1
ProcVersionSignature: Ubuntu 4.2.0-16.19-generic 4.2.3
Uname: Linux 4.2.0-16-generic x86_64
ApportVersion: 2.19.1-0ubuntu2
Architecture: amd
Public bug reported:
I have Ubuntu 15.04 installed, with three PPAs enabled (Cinnamon Stable,
Oracle Java and Google's tlk plugin).
I tried to upgrade to Ubuntu 15.10, and during the upgrade process I got
the "Could not calculate the upgrade" error. Disabling the PPAs didn't
help.
Looking into /
Update: I just enabled the vivid-proposed repository, which made some
updates available. However, after installing all of them and restarting
the system, the problem persists.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bug
After much testing, I ended up uninstalling all the "foreign" packages
in /var/log/dist-upgrade/main.log and the update is in progress now. I'd
say it was cinnamon what was preventing the upgrade.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed t
Public bug reported:
After the upgrade to Ubuntu 15.04, the suspend option is not available
in Cinnamon.
The Cinnamon team states that some Systemd library may be missing in
Ubuntu: https://github.com/linuxmint/Cinnamon/issues/4060
I have tried to boot using Upstart (using advanced boot) and the
This is probably the reason why the "Mark All Upgrades" button looks so
bad in HiDPI, as opposed to all the other icons, which look very good
and well defined.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/
Tested with a USB hub; doesn't make any difference.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1532292
Title:
Mechanical part stops moving after each operation
To manage notifications about this
This issue is still present with my LiDE 30, even using Rolf's the PPA
(1.0.26-git20160103-wily0).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1250196
Title:
sane plustek backend not working on US
Actually, it does work with the PPA when connecting it to a different
USB slot.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1250196
Title:
sane plustek backend not working on USB 3 root hub
To ma
Public bug reported:
The scanner only does the first operation after I plug it in. E.g.
preview a page, or scan it. On the second operation, the mechanical part
does not move anymore (there is no noise whatsoever from the scanner),
and the scan output is pitch black.
The workaround I have found i
Reported a separate bug for the intermittent issue I am having now, with
more detail added. https://bugs.launchpad.net/ubuntu/+source/sane-
backends/+bug/1532292
It may be a fully separate issue, or it may be related.
--
You received this bug notification because you are a member of Ubuntu
Bugs,
Edit: the workaround above only seems to work sometimes. Most of the
time the scanner will remain dead.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1532292
Title:
Mechanical part stops moving afte
In Utopic, with evince 3.14.1, evince doesn't crash anymore. But
rendering of the second page onwards halts for a while.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1129430
Title:
evince crashes w
Note that with this document, a similar slowndown is happening in Okular
(0.20.0).
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1129430
Title:
evince crashes while reading pdf file
To manage notif
Bug created:
https://bugs.launchpad.net/ubuntu/+source/evince/+bug/1404393
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1129430
Title:
evince crashes while reading pdf file
To manage notifications
Public bug reported:
Evince freezes while loading the second page onwars of this document:
http://www.hotmobile.org/2012/papers/HotMobile12-final72.pdf
With an earlier version of evince, this document used to crash evince
and use a substantial amount of CPU and RAM
(https://bugs.launchpad.net/ubu
If there is a fix around, as it looks like, any idea of which package to
monitor, upgrade or compile?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1250196
Title:
sane plustek backend not working on
Same issue here with a LiDE 30, in all the ports in my system (USB 2.0
and 3.0).
$ lspci | grep USB
00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family
USB xHCI (rev 05)
00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family
USB EHCI #2 (rev 05)
0
Note: the version I have tested with is 1.0.25-git20141220-utopic0, and
a Canon LiDE 30 scanner.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1250196
Title:
sane plustek backend not working on USB
I just upgraded SANE as the git version in ppa:rolfbensch/sane-git
(https://launchpad.net/~rolfbensch/+archive/ubuntu/sane-git), and so far
it seems to be working great.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.laun
Backlight buttons are working fine here (XPS 15 9530, Ubuntu 14.04,
kernel 3.13.2-031302-generic).
No acpi keywords added to the grub parameters, and no modification
performed in any xorg.conf files.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscrib
Public bug reported:
Issue upgrading to Ubuntu Utopic having Cinnamon installed from the
nightly PPA.
ProblemType: Package
DistroRelease: Ubuntu 14.10
Package: nemo 2.2.4-1
Uname: Linux 3.16.1-031601-generic x86_64
ApportVersion: 2.14.7-0ubuntu2
Architecture: amd64
Date: Thu Sep 25 00:01:15 2014
My computer is a XPS 15, also with a resolution of 3200x1800.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1371973
Title:
Xorg crashed with SIGSEGV
To manage notifications about this bug go to:
ht
Confirmed this issue with Ubuntu 14.10, trying to create a USB disk with
Clonezilla. Is there any known workaround for this issue, or
downgrade/upgrade that fixes it?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchp
I got this error while trying to install this kernel:
http://kernel.ubuntu.com/~kernel-ppa/mainline/daily/2012-12-17-raring/
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1090539
Title:
virtualbox-
xkill did the job. At least we have a workaround.
Seriously... I know I updated the kernel, so restarting is required in
order to get the changes. I will eventually restart, but not right now.
I understand that for some critical updates it is important to restart
ASAP, and some people tend to nev
By the way, this bug is related (if not duplicate) to
https://bugs.launchpad.net/ubuntu/+source/update-manager/+bug/1033226
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/917452
Title:
computer needs
Public bug reported:
When opening this pdf file, the first two pages are displayed correctly.
However, once I scroll down to the third page, a "loading" message will
appear indefinitely, and eventually evince crashes.
During that time, I can see in "top" that evince is using a substantial
amount
I got this error trying to install kernel 3.8.0-rc4 from
http://kernel.ubuntu.com/~kernel-ppa/mainline/
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1090539
Title:
virtualbox-dkms 4.1.18-dfsg-1ubun
In my system it crashes around once or twice per day. I send attached
some files that might be rellevant.
The apparently most interesting part, in Xorg.log:
[ 30672.939] (EE) intel(0): Failed to submit batch buffer, expect rendering
corruption or even a frozen display: No space left on device.
[
** Attachment added: "Logs collected at the time of one of the crashes"
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1070487/+attachment/3514791/+files/error.tar.gz
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
http
Using kernel 3.5.0-22 (x86) on Ubuntu 12.10.
** Attachment added: "Hwinfo of the computer suffering the crashes"
https://bugs.launchpad.net/ubuntu/+source/xorg-server/+bug/1070487/+attachment/3514792/+files/hwinfo.txt
--
You received this bug notification because you are a member of Ubuntu
B
I have this error every couple of days, especially anytime that I try
something disk-intensive, like compile the Linux kernel or decompressing
the kernel sources.
** Attachment added: "ntfs-3g crash"
https://bugs.launchpad.net/ubuntu/+source/fuse/+bug/1072270/+attachment/3514993/+files/_bin_nt
** Attachment added: "gvfs crash"
https://bugs.launchpad.net/ubuntu/+source/fuse/+bug/1072270/+attachment/3514994/+files/_usr_lib_gvfs_gvfsd-metadata.1000.crash
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad
May this bug be a duplicate of bug
https://bugs.launchpad.net/ubuntu/+source/ntfs-3g/+bug/1061874 ?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1072270
Title:
ntfs-3g "Transport endpoint is not co
Just updated fuse to 2.9.2-3 from the Debian builds at
http://ftp.us.debian.org/debian/pool/main/f/fuse
I'll report any new crashes (or lack of them) after the update.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launc
I just had the same problem trying to run an application using OpenCV.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/456257
Title:
Could libtiff.so.3 be provided as a symlink to libtiff.so.4?
To ma
Happened while adding/removing elements to panel.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/823351
Title:
gnome-panel crashed with SIGSEGV in gtk_container_forall()
To manage notifications abou
Confirmed, installing the ppa fixed the problem, in Ubuntu 12.04 - 64
bits:
sudo add-apt-repository ppa:plt/racket
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/882278
Title:
The Toolbar of DrRacke
Public bug reported:
I cannot select and copy text from a text postscript file. One of the
files that I have used to test:
http://www.isle.org/~langley/papers/adapt.um99.ps
With pdfs, select text + copy is working fine.
After converting this ps file to pdf using ps2pdf, I can select and cop
The temperature stays in Farenheit, regardless of what I set in the
preferences.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1067110
Title:
Weather report can't set unit preferences
To manage not
Public bug reported:
While installing kernel 3.7-rc7 (amd64), I got the following error:
Error! Bad return status for module build on kernel: 3.7.0-030700rc7-generic
(x86_64)
Consult /var/lib/dkms/nvidia-current/304.43/build/make.log for more information.
Attached referred file for further info
Today I had this same problem with a font with extension .TTF
(uppercase). There was an error during install of the font (the same
error message).
Renaming the font to .ttf solved the issue. I was then able to install
the font properly. Might the solution be something else, and it was just
a coinc
Does it crash while scanning just 1 picture, or after having scanned
many pictures? Does it happen always, or randomly?
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/663263
Title:
Simple Scan Tool c
It is indeed troublesome to keep all the pages the exact same size,
especially when you scan in different session in order to avoid out of
memory crashes. This feature would certainly be helpful.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
This problem happens to me everytime I scan many pages in a row. When
the RAM of my PC is over, the program crashes.
Other programs, such as XSane, scan to temporary files, so that it is
not necessary to keep all the scanned pages in memory, and they allow
the possibility to resume scanning what y
I can confirm this error, at least with my scanner (LiDE 30).
If I try to scan anything slightly bigger than A4 (which my scanner
allows, just a couple of centimeters), the top part is cropped to A4
height. The width can be a bit bigger than A4, but not the height.
In other programs, such as Xsan
I think this bug might be related to
https://bugs.launchpad.net/ubuntu/+source/simple-scan/+bug/829416
Or maybe not. I also have the same scanner, and the same problem when
scanning the top part of the scanner (this is, sheets bigger than A4).
--
You received this bug notification because you ar
The title says "ubuntu doesn't recognize the printer, but does recognize
the scanner of the same printer"
And the description: "when I order to scan it makes the function, but
when I order to print it doesn't, my printer is multifunctional".
borbonio: Is the printer working in other applications?
Actually, I don't think this bug is fixed at all.
When scanning text documents (at 300 dpi), around 15 pages consumes
about 500 to 900 MB of memory. If I continue scanning, eventually the
program will run out of memory, and crash, therefore all the work will
be lost.
Furthermore, sometimes the cr
I'm having the same problem. Most of the time I boot my systems, it
hangs right after showing the "kubuntu" splash screen and just where it
should show the "Nvidia" one.
If I turn off and on again the computer a few times (2 to 10 times),
eventually it will boot.
I have seen in the Nvidia forum
(
For comparison, the log of a successful boot.
** Attachment added: "Xorg.0.log"
https://bugs.launchpad.net/ubuntu/+source/nvidia-graphics-drivers/+bug/731810/+attachment/1926186/+files/Xorg.0.log
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscrib
Public bug reported:
Binary package hint: alsa-utils
Upgrading from Ubuntu 10.10 to 11.04 alpha
ProblemType: Package
DistroRelease: Ubuntu 11.04
Package: alsa-utils 1.0.24.2-0ubuntu2
Uname: Linux 2.6.38-020638rc5-generic i686
NonfreeKernelModules: nvidia
Architecture: i386
Date: Fri Mar 4 19:14
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/729253
Title:
package alsa-utils 1.0.24.2-0ubuntu2 failed to install/upgrade:
subprocess installed post-installation script returned error exit
statu
I have just had this error while opening some pdf files from Firefox.
One of them (http://www.docv.gva.es/datos/2010/09/06/pdf/2010_9553.pdf)
has crashed evince. Nonetheless, once I have tried again it has opened
the file without problems. So, the error hasn't reproduced.
In kern.log I get:
evinc
** Visibility changed to: Public
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/744836
Title:
gvfsd-metadata crashed with SIGSEGV
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://li
*** This bug is a duplicate of bug 537218 ***
https://bugs.launchpad.net/bugs/537218
By the way, I added the "nopat" option to /etc/default/grub, and after
some days I have not seen the error again. Before, it was happening
around 85% of the boots.
--
You received this bug notification becau
Indeed, I think the regulatory domain should be able to be changed from
NetworkManager, either letting the user choose, or picking the country
from the IP address, or even better, from the location set in the clock
applet.
--
You received this bug notification because you are a member of Ubuntu
B
Also happening here, in my two (different) laptops, both using Ubuntu
10.10, NetworkManager 0.8.1. Tested on kernels 2.6.34, 2.6.35, and
2.6.36.
The wifi I am connecting to has low signal, because the router is a bit
far. I don't know if this is related or not. It uses WEP encryption. In
other enc
1 - 100 of 109 matches
Mail list logo