** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/24060811/BootDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/24060813/Dependencies.txt
** Attachment added: HalComputerInfo.txt
http://launchpadlibrarian.net/24060814/HalComputerInfo.txt
**
Public bug reported:
Resume failed after a few suspend/resume cycles. The fans were on but
the display remained off.
ProblemType: KernelOops
Annotation: This occured during a previous suspend and prevented it from
resuming properly.
Architecture: amd64
CurrentDmesg:
[ 25.432729] r8169: eth0:
Public bug reported:
Binary package hint: gnome-control-center
I am suggesting a keyboard shortcut that walks through workspaces just like the
famous Move between windows, using a popup window does. All workspaces would
be accessible with one shortcut, so you don't have to think where you want
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/22059781/Dependencies.txt
--
Add keyboard shortcut for moving between workspaces
https://bugs.launchpad.net/bugs/326352
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
** Bug watch added: GNOME Bug Tracker #570817
http://bugzilla.gnome.org/show_bug.cgi?id=570817
** Also affects: gnome-control-center via
http://bugzilla.gnome.org/show_bug.cgi?id=570817
Importance: Unknown
Status: Unknown
--
Add keyboard shortcut for moving between workspaces
I'd like to add that the chip goes back to gigabit speed if I
rmmod/modprobe r8169. This should be done automatically during
suspend/resume.
/etc/default/acpi-support line 84 says it's done but this is not true
according to dmesg.
--
Ethernet controller RTL8111/8168B no gigabit after
I updated the BIOS from F7 to F8 and ran test-suspend again. There were
no errors this time.
Manual suspends used to fail when it stayed suspended for a long time.
This is also fixed with the BIOS update.
--
[Gigabyte Technology Co., Ltd. EP43-S3L] suspend/resume failure [non-free:
nvidia]
Public bug reported:
After suspend/resume, the interface workes in 100 Mbit mode only
according to the switch it is connected with.
ProblemType: Bug
Architecture: amd64
DistroRelease: Ubuntu 9.04
MachineType: Gigabyte Technology Co., Ltd. EP43-S3L
NonfreeKernelModules: nvidia
Package:
** Attachment added: BootDmesg.txt
http://launchpadlibrarian.net/24287683/BootDmesg.txt
** Attachment added: CurrentDmesg.txt
http://launchpadlibrarian.net/24287684/CurrentDmesg.txt
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/24287685/Dependencies.txt
**
** Attachment added: apt.log
http://launchpadlibrarian.net/36505022/apt.log
--
Upgrade jaunty - karmic: Abort with IOError
https://bugs.launchpad.net/bugs/479466
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
** Attachment added: apt-term.log
http://launchpadlibrarian.net/36505063/apt-term.log
--
Upgrade jaunty - karmic: Abort with IOError
https://bugs.launchpad.net/bugs/479466
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
** Attachment added: main.log
http://launchpadlibrarian.net/36505083/main.log
--
Upgrade jaunty - karmic: Abort with IOError
https://bugs.launchpad.net/bugs/479466
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
** Attachment added: term.log
http://launchpadlibrarian.net/36505086/term.log
--
Upgrade jaunty - karmic: Abort with IOError
https://bugs.launchpad.net/bugs/479466
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs
** Attachment added: xorg_fix_intrepid.log
http://launchpadlibrarian.net/36505090/xorg_fix_intrepid.log
--
Upgrade jaunty - karmic: Abort with IOError
https://bugs.launchpad.net/bugs/479466
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to
I'm still getting these crashes with the latest linux-image-generic
2.6.31.16.29. This is reproducable and it always logs that 'unable to
handle kernel paging request' message if it is able to log anything at
all. I'm attaching some more samples of that.
I did a fresh karmic install on a spare
*** This bug is a duplicate of bug 408417 ***
https://bugs.launchpad.net/bugs/408417
The upstream bug # is 592976
--
gdm has no remote login screen from ltsp-4.x
https://bugs.launchpad.net/bugs/415330
You received this bug notification because you are a member of Ubuntu
Bugs, which is
** Attachment added: Dependencies.txt
http://launchpadlibrarian.net/35436620/Dependencies.txt
--
Upgrade jaunty - karmic: Abort with IOError
https://bugs.launchpad.net/bugs/479466
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Public bug reported:
Binary package hint: python-support
During distribution upgrade, near the end of the 'Installing the
upgrades' step, I got an error message: 'Could not install the upgrades
The upgrade is now aborted. Your system could be in an unusable
state...'.
The last lines in the
Public bug reported:
This is a regression. I did not have this problem in 9.04. After
upgrading to 9.10 I can't use suspend any more because shortly after
resume the system always crashes. Sometimes it even is unable to mount
my home partition (/dev/md2, is a raid0) after the next reboot. And
** Attachment added: some commented logs
http://launchpadlibrarian.net/35796362/crashlog
** Attachment added: .etc.asound.conf.txt
http://launchpadlibrarian.net/35796363/.etc.asound.conf.txt
** Attachment added: AlsaDevices.txt
http://launchpadlibrarian.net/35796364/AlsaDevices.txt
**
Not reproducable in Ubuntu 10.04 RC. I don't care about 9.10 any more,
so it can be closed.
--
Kernel oops always after resume from suspend
https://bugs.launchpad.net/bugs/484406
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
Architecture: amd64
Dependencies:
DistroRelease: Ubuntu 9.04
NonfreeKernelModules: nvidia
Package: linux None [modified: /var/lib/dpkg/info/linux.list]
PackageArchitecture: amd64
ProcEnviron:
SHELL=/bin/bash
PATH=(custom, user)
LANG=en_US.UTF-8
Uname: Linux 2.6.28-18-generic x86_64
The bug is still present in Ubuntu 10.04 RC.
--
Ethernet controller RTL8111/8168B no gigabit after suspend/resume
https://bugs.launchpad.net/bugs/347530
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
Public bug reported:
Tried to update from 14.04 to 14.10. Failed and asked to file a bug
report.
ProblemType: Bug
DistroRelease: Ubuntu 14.04
Package: ubuntu-release-upgrader-core 1:0.220.7
ProcVersionSignature: Ubuntu 3.13.0-52.86-generic 3.13.11-ckt18
Uname: Linux 3.13.0-52-generic x86_64
** Attachment added: "/proc/cpuinfo"
https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1509764/+attachment/4504496/+files/cpuinfo
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1509764
Public bug reported:
My system freezes and reboots 30 seconds later. This happens at random times
between shortly after boot or up to three ours after boot. My CPU is a Core i5
5675C. I think it is the same problem discussed here
https://bugzilla.kernel.org/show_bug.cgi?id=103351
They have a
** Description changed:
- My system freezes and reboots 30 seconds later. This happens at random times
between shortly after boot or up to three ours after boot. My CPU is a Core i5
5675C. I think it is the same problem discussed here
https://bugzilla.kernel.org/show_bug.cgi?id=103351
+ My
I expected this to gain more attention. The current version of Ubuntu is
unusable on all Broadwell CPUs. A fix is available in that repository:
https://github.com/bgw/bdw-ucode-update-tool.git
They talk about it in that kernel bug I linked to above. The fix works for
people there and for me. Why
Is there a way to update release media soon? Because it does not finish
installing before MCE hits. Workaround is to put a Haswell CPU in the
socket temporarily, or install the harddrive in another machine.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is
Still there in 15.10
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/906472
Title:
Empathy emoticons are not shown on global menu
To manage notifications about this bug go to:
*** This bug is a duplicate of bug 906472 ***
https://bugs.launchpad.net/bugs/906472
Still there in 15.10! Always reproducible.
** This bug has been marked a duplicate of bug 906472
Empathy emoticons are not shown on global menu
--
You received this bug notification because you are a
intel-microcode was installed (by default?). It does not contain the fix. I
wasn't aware of this package. It should be the one this bug is against.
That git repository above installs
/lib/firmware/intel-ucode/06-47-01.initramfs, which fixed it for me.
--
You received this bug notification
intel-microcode contains /lib/firmware/intel-ucode/*, which needs to be
updated
** Package changed: linux-firmware (Ubuntu) => intel-microcode (Ubuntu)
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
Public bug reported:
Every few days a dialog pops up saying "Authentication is required to change
your own user data" with an entry field for a password. If I type my user's
password the dialog will reappear with an empty entry field. If I click on the
cross to close the window many times it
No, I have plain Ubuntu.
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1512002
Title:
Annoying dialog "Authentication is required to change your own user
data"
To manage notifications about this
35 matches
Mail list logo
