JackOfAll wrote:
Just sync'd git and pushed a new LMS build to testing repo. For anyone
already using the repo you can manually update to it. (Testing repo not
enabled by default, so needs a manual update.)
Update...
Code:
sudo sc-cleanUpdate-testing
Wirrunna wrote:
Thank you Steen Greg for the update. Works fine.
Thanks Wirrunna for the report.
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread:
Greg Erskine wrote:
Hi Howardyiu, SamS,
I have my LMS server on a Raspberry Pi, so it may be different on a NAS,
but I never have to reboot it. If the piCorePlayer doesn't appear on LMS
or on iPeng it has turned out to be an incorrect setting on Squeezelite
which prevented squeezelite
Thank you Steen Greg for the update. Works fine.
A camel is a racehorse designed by a committee.
Wirrunna's Profile: http://forums.slimdevices.com/member.php?userid=3225
View this thread:
I'm afraid that there was a version 1.17a available for some hours which
will announce itself as 1.17.
if you can see your MAC address on the squeezelite settings page, in the
help text to setting the MAC address, then you have version 1.17a
steen
piCorePlayer a small player for the Raspberry
hi Howardyiu,
Can I just confirm that you are new to LMS and the Squeezeboxs in
general?
Have you used LMS with other devices? Is it working?
regards
Greg Erskine's Profile:
Howardyiu wrote:
thanks a lot for the advice Greg, however, i know nothing about how to
set the squeezelite up. may i share some of my info. and u can guide me
to finish the setup and finally i can use the pCP.
i am using 1) NAS synology 213j as media source, LMS app installed in
the NAS,
Greg Erskine wrote:
hi Howardyiu,
Can I just confirm that you are new to LMS and the Squeezeboxs in
general?
Have you used LMS with other devices? Is it working?
regards
hi Greg, i m new to LMS, and i just wanna use pCP then i enter this
area... Thanks
Howardyiu wrote:
hi steen!
i m fine with controlling via the web-gui, confi and everything, also i
hv updated to 1.17a, but also showing 1.17 only.. i may try to re-burn
the 1.17a image again and report if there is any problem. and i m using
MAC OS then can't use the putty...
if i
sbp wrote:
Thanks, I found the bug and it is fixed
Thanks, I found the bug - will be corrected
I just checked with my pi, and I don't see this problem. (I'm only able
to use one pi at the time). Do you see the same if you only connect one
pi?
Do you set a unique MAC address in
sbp wrote:
Hi Howard.
Could I suggest that you as a start try to follow these instructions:
1. Remove all settings in the squeezelite setup page, press submit.
2. Go back to squeezelite settings page and choose analog - press
submit (in the field just below the area where you choose the
Howardyiu wrote:
Followed your steps, still nothing appear
I don't know your NAS but could there be a firewall issue?
steen
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://sites.google.com/site/picoreplayer/home
*Please 'donate'
Hi
I have the same problem than Howardyiu.
LMS on Synology does not recognize the picoreplayer. A way to solve that
is to remove the address of the LMS server (x.x.x.x:9002 in my case) in
the squeezelite configuration and reboot. Then everything goes correctly
and the LMS on synology recognize
Port 900x tcp (9000 ,9001,9002 and possibly some other ) is the web-UI
port 3483 is slim proto for the players , never used pi core but on any
other squeezebox ( or software player ) you just give the ip number .
In most cases a player will auto discover the server , if it's on the
same
I experience the same as pnaga with my QNAP nas.
When filling in the IP server adress Picoreplayer does not show up in
LMS, and LMS is also responding very slow.
After removal of the IP adress everything works fine.
afaik, there are no pre-built binaries for perl 5.20 (yet?), so you'll
either have to downgrade perl to 5.18, or build LMS yourself.
[ extGUI4LMS - an alternative web interface: 'forum'
(http://forums.slimdevices.com/showthread.php?98186-Announce-Alternative-Web-Interface-(beta))
/ 'homepage'
Sorry, my fault. I indeed used xxx.xxx.xxx.xx:9001
Now it's working fine.
Thank you guys!
johtem's Profile: http://forums.slimdevices.com/member.php?userid=56859
View this thread:
johtem wrote:
I experience the same as pnaga with my QNAP nas.
When filling in the IP server adress Picoreplayer does not show up in
LMS, and LMS is also responding very slow.
After removal of the IP adress everything works fine.
Do you use the correct port number. If you haven't changed
alnames wrote:
Update to my earlier post. I was able to enter the LMS IP:Port on each
Pi (one at a time) and retain basic functionality. However, once the Pi
was rebooted it was no longer recognized by the LMS. I could still
access each Pi's Web Server and was able to restore each Pi back to
Greg Erskine wrote:
Hi alnames,
Are you using the right port LMS number? See the previous couple of
posts. Do you really need to set the MAC address, I never do? Test
without LMS IP set or MAC addresses.
Thanks for reporting that. I think it is because the web server is
started
pnaga wrote:
Hi
I have the same problem than Howardyiu.
LMS on Synology does not recognize the picoreplayer. A way to solve that
is to remove the address of the LMS server (x.x.x.x:9002 in my case) in
the squeezelite configuration and reboot. Then everything goes correctly
and the LMS on
Hi steen,
I can find the player in the web based lms finally by choosing audio
output as u suggested and typing the IP of the NAS. Dun reli know why i
have to key in the ip, maybe connecting via switch is a matter.
BTW, the audio output is with quite a lot noise, I think it is
definitely not
Thanks, I hadn't thought about binaries being available. For now I have
the debian testing package running on another machine so I'm ok. Just
wanted to let someone know about the issue.
crabbz's Profile:
23 matches
Mail list logo
