Murphyprecht wrote:
Yup, pin 16 on the lcd goes to gpio 17 on the pi via a 50 ohm resistor
and pin 15 on the lcd to pin 1 5v
On the PI isn't pin 1 3.3volts, should pin 15 on LCD go to pin 2 of pi.
Pin 16 as stated goes to gpio 17 which is Pin 11 on pi.
mn283 wrote:
On the PI isn't pin 1 3.3volts, should pin 15 on LCD go to pin 2 of pi.
Pin 16 as stated goes to gpio 17 which is Pin 11 on pi.
pin15 on LCD goes to pin 1 on Pi (3,3V)
rippi46's Profile:
rippi46 wrote:
Hi
the image of post#35 is another image. i have changed the image a few
days ago.
regards
Thanks Rippi and Murphyprecht, really appreciate the help. Started from
scratch again this morning with the image from post #35. Worked like a
charm. I'm reusing a 14 pin 40x2
rippi46 wrote:
pin 15 on LCD goes to pin 1 on Pi (3,3V)
Looking the datasheets they quote 5 volts for the back lighting ? are
you running 3.3v to make it dimmer ?
http://en.wikipedia.org/wiki/Hitachi_HD44780_LCD_controller
Yup, 5v is required
Murphyprecht's Profile: http://forums.slimdevices.com/member.php?userid=63254
View this thread: http://forums.slimdevices.com/showthread.php?t=101269
___
I've updated the SoA install script for cubietruck to enable the spdif
port and added a script to build a custom kernel.
By default is should install and be able to play in 16 bit mode. With
the custom kernel is supports 24 bit audio.
This registers as 24 bits on my dac, but I have not
I have purchased the new Pi along with PIDAC+ from hifiberry. Loaded
picoreplayer onto a 4GB card but as soon as I select the HiFiBerry card
the system stops working. I can't even telnet into it. I haven't
connected up a screen yet to see if there are any messages yet. Do I
need to manually
AndyBeevers wrote:
I have purchased the new Pi along with PIDAC+ from hifiberry. Loaded
picoreplayer onto a 4GB card but as soon as I select the HiFiBerry card
the system stops working. I can't even telnet into it. I haven't
connected up a screen yet to see if there are any messages yet. Do
AndyBeevers wrote:
I have purchased the new Pi along with PIDAC+ from hifiberry. Loaded
picoreplayer onto a 4GB card but as soon as I select the HiFiBerry card
the system stops working. I can't even telnet into it. I haven't
connected up a screen yet to see if there are any messages yet. Do
Hi, I just assembled my first piCorePlayer using the B+ hardware and I
am unable to access the web setup page using port 8077. I can putty
into the player and see the command line options and so it appears to be
working. Any thoughts? Listing the alsa devices I see my USB DAC,
but I don't see
Hammer wrote:
Hi, I just assembled my first piCorePlayer using the B+ hardware and I
am unable to access the web setup page using port 8077. I can putty
into the player and see the command line options and so it appears to be
working. Any thoughts? Listing the alsa devices I see my USB
11 matches
Mail list logo
