Hi
I thought I'd give LIRC a try on one of my PCPs when I came across and
old Microsoft IR USB receiver in a box. I enabled Beta, turned on LIRC,
went to the config page and set the device to be hidraw1 - and when I
point an old queezebox remote at the IR sensor, the red light comes on
(so it's
I use a WiFI connection. As I said, with 3.21 Audio, everything works
perfectly fine, so my simple logic tells me that something must have
changed. :confused:
schup011's Profile:
There are no hotfixes for 3.22
I don't run the audio version with LMS, nor would I recommend it.
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thread:
Hi folks,
I am using pCP on a Raspberry Pi 3 Model B, with iQAudio DAC+, 7''
touchscreen and jivelite.
I had done the update from 3.21 (Audio) to 3.22 (Audio), but regularly
experienced crashes (once a day). This occurred usually when I used the
search (full text search PlugIn) on the
paul- wrote:
> I dont see where the Amp Zero has any gpio connection. Pin 38 is
> gpio20, which shows unused.
>
>
> https://www.justboom.co/technical-guides/boards-pinout/
OK my mistake. I see that the Amp HAT has a soft mute signal, and the
Amp zero doesn't.
Cheers,
Toonie.
I dont see where the Amp Zero has any gpio connection. Pin 38 is
gpio20, which shows unused.
https://www.justboom.co/technical-guides/boards-pinout/
paul-'s Profile:
saneangel wrote:
> Unfortunately that link is old - and the project has been removed.
I was 'moved to github'
(https://github.com/ysop/jivelite-qvga-touch-rpi).
saneangel wrote:
> Is there any way I can get error codes or messages from jiveLite to
> indicate what the fault condition is ?
Hi,
Firstly, a big thank you for all your support and patience with me in
resolving my wifi issue. I am currently trying another channel which
seems clear enough for now, to see how I get on (hopefully a future
update will allow regions to be set as with Raspain). Currently really
enjoying the
srvduplex wrote:
> Hi piPlayer
>
> I did, and when I launch the calibration the screen is back upside
> down.
> Thanks
Please try my method to rotate the screen in the bootlocal.sh entry and
run calibration after that.
And dont forget to delete the entry in do_rebootstuff.sh.
piPlayer wrote:
> Did you calibrate the screen? Perhaps the touch screen works right after
> that.
Hi piPlayer
I did, and when I launch the calibration the screen is back upside
down.
Thanks
srvduplex's Profile:
You need to look for a 320x240 skin for jivelite. Perhaps this thread
helps: 'link'
(http://forums.slimdevices.com/showthread.php?103594-Proper-320x240-PITFT-Skin-for-Jivelite)
Then you have to implement it in pcp-jivelite.tcz and set this skin to
the default value.
The extension
11 matches
Mail list logo