The OS will not spin it down. Some drives will do it in the firmware.
Other than a little power, there is no reason to spin it down.
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thread
I am in the process of setting up PiCore as with LMS as the primary
server. I was impacted by the prior Sourceforge outage, however now that
thats up, I have another question.
The configuration I intend to use is with a data drive connected to the
server by USB. With PiCore;
Should it;
Will it
Howard Passman wrote:
> O.K. i get the part abou the LMS cache and I could back that up using
> WINscp easy enough. Not sure I'm following the first part of your answer
> though. Should I also backup /mnt/mmcblk0p2/tce/slimserver is some
> fashion.
>
> If I then lose everything again I can use
O.K. i get the part abou the LMS cache and I could back that up using
WINscp easy enough. Not sure I'm following the first part of your answer
though. Should I also backup /mnt/mmcblk0p2/tce/slimserver is some
fashion.
If I then lose everything again I can use the files mentioned to rebuild
my s
Howard Passman wrote:
> Here... /mnt/mmcblk0p2/tce/slimserver So I guess it's gone??
>
> What is the best procedure for backing this thing up so I don't lose all
> of my settings?
>
> Thanks,
>
> Howard
I'm assuming that your only linux computer is the rpi. That's why I
wanted you to setu
Here... /mnt/mmcblk0p2/tce/slimserver So I guess it's gone??
What is the best procedure for backing this thing up so I don't lose all
of my settings?
Thanks,
Howard
paul- wrote:
> It all depends on your setup. LMS is not part of the mydata.tcz
> backup.
>
> Where did you save the LMS ca
It all depends on your setup. LMS is not part of the mydata.tcz
backup.
Where did you save the LMS cache?
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thread: http://forums.slimdevices
piPlayer wrote:
> Hello,
>
> Currently I try around with a 4.3 inch WaveShare display with 480x272
> resolution. For this I need the WQVGAsmallPrint skin, which is not
> available in the latest pcp-jivelite.tcz, which was loaded via the web
> interface. Is there a chance to get those "old skins"
So I am starting from scratch completely? Backups won't help? The reason
I ask is I have a bunch of SB players and have different settings for
things like SDT. Having to build those over is gonna be a...well, you
know.
paul- wrote:
> I would use a different SD card, and start with a fresh image
Howard Passman wrote:
> Nope, PCP does not start. I figured I would have to get started before I
> could SSH in.
>
> Should I start with loading the pcp.img?
>
> Thanks,
>
> Howard
I would use a different SD card, and start with a fresh image, once
booted. The fresh image will not have any
Also, make sure you measure the PSU when under load. It may show a good
voltage when it isn't driving anything but could drop way down when
requested to actually do what it's supposed to, supply power. I recently
replaced my PSU, it delivered an OK voltage when disconnected, but fell
below 3V when
Nope, PCP does not start. I figured I would have to get started before I
could SSH in.
Should I start with loading the pcp.img?
Thanks,
Howard
paul- wrote:
> what happens during boot. You should see it load the backup.
>
> Does PCP even start? If not, the the ssh server isnt running for
thanks, BPA, I'll try it.
town: Musical Fidelity Dr.Thomas, Preamp II, Infinity 7K, Squeezebox
Classic (2), Squeezebox Radio, Raspberry Pi 2 with HiFiBerry, Ubuntu
16.4 LTS server
country: Musical Fidelity A-5, Infinity Renaissance 90, Musical Fidelity
A120, Sonus Faber Concertino, Squeezebox C
Can you post a screenshot of your LMS config page in pCP.
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thread: http://forums.slimdevices.com/showthread.php?t=108618
_
The backup is loaded automatically at every reboot.
paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858
View this thread: http://forums.slimdevices.com/showthread.php?t=107352
___
A common fault with SB2 is WLAN card dying and this will prevent SB3
from booting. If PSU is OKish - then red led seen in digitalport.
SB3 can work without an WLAN card so you could open your SB3 (needs a
torx screwdriver) and remove the WLAN card and then see if the unit
boots.
Blog of a SB3 r
Woke up this morning and my RPI3/piCorePlayer was sitting at the
TC@SBServer log on prompt. I'm assuming I need to reload, but not sure
of the proper procedure.
I have a current backup mydata.tgz file and a current newconfig.cfg
file.
How do I go about reloading my server from the backups? Do I h
hello All,
one of my SBs, a white SB3 with the old logo SlimDevices, died yesterday
and I'm very sad.
Last time it was seen alive, it was frantically rebooting each time it
tried to play something.
I tried reviving it pressing +/1 on the remote, but no, nothing worked.
Still, I cannot believe
bakker_be wrote:
> Are your USB keys always mounted on the same location after a restart?
Hello,
Yes, my USB keys are always mounted on the same location.
paul- wrote:
> No, it is not normal or expected. Provided you are setting up LMS and
> using the drive mounting routines on the piCorePlaye
19 matches
Mail list logo