chill wrote:
> I'll go back and check this evening though.
Confirmed. I went back to the raw pCP6.0.0-b1 image, and am unable to
write a value to an output pin. But after the update I can. Same
version number (2.52) but different behaviour, and still not working for
input pins.
paul- wrote:
>
>
> Update wiriingpi from the extension browser or from command line
> (pcp-update wiringpi.tcz)
With this version, I *can* now set the state of an output pin with the
gpio write command. I'd need to go back to an earlier image to double
check, but I'm fairly sure I wasn't
Likely there is something missing in the memory addressing, The RPI docs
aren't complete yet, and without his sources..
For now, I just rebuilt the package based on Gordon's debian package,
luckily there are no dependencies, so it's binary compatable here.
Update wiriingpi from the
SamS wrote:
> Just getting back into the picoreplayer game after an absence.
>
> I noticed that Im not getting gapless on FLAC files via HDMI. Remind me
> please, is this normal?
No, it's not normal.
I do occasionally have gapless playback break on very large playlists.
It's been happening
Just getting back into the picoreplayer game after an absence.
I noticed that Im not getting gapless on FLAC files via HDMI. Remind me
please, is this normal?
SamS's Profile:
chill wrote:
> I'll also compare with what I get on a 3B+.
More GPIO testing.
Without anything connected to the GPIO pins on my 4B I'm still finding
that I'm unable to change the value on a given pin, but on a 3B+ it's
behaving as expected. The version number is 2.46 on the 3B+ and 2.52 on
Not sure if anyone has posted this. Not a deal breaker, but useful to
know.
https://arstechnica.com/gadgets/2019/07/raspberry-pi-4-uses-incorrect-usb-c-design-wont-work-with-some-chargers/
*Home:* VBA 4TB (2.4)>LMS 7.9.1>Transporter, Touch, Boom, Radio (all
ethernet)
*Cottage:* VBA 3TB
Im running FreeNAS-9.10.2-U6 (561f0d7a1) has anyone managed to install
LMS on this build. I have run RichieB script in the build_lms. The
shell closes after about 5min into the
installtion, the last message on the screen is "resolving deltas"
Anyone have any ideas what the problem could be?
chill wrote:
> Nothing seems to change if I run it again with a button pressed though.
> And if I use 'gpio read 24', I always get a value of '1' whether the
> button is pressed or not.
I'd forgotten that without sbpd I need to configure the pins manually,
i.e. I need to set each pin to be
paul- wrote:
> Short and sweet announcement, but for those that have a new PI4 and want
> to use pCP..Only an image is offered, as we had to increase
> partition sizes to accommodate the PI4 firmware/kernels. One image
> still supports all rpi boards.
>
>
paul- wrote:
> Yes, wiring pi needs updated. Gordon has not released the source code
> with the updates, so I made some updates myself, but perhaps there is
> something else needed. Does gpio readall show the proper stated of the
> gpio?
Thanks Paul
gpio readall gives the following.
11 matches
Mail list logo
