Im. It by my devices to take a screen shot.But you need to put the
actual IP address of the pi with the adc moduleyou cannot use
hostname.
Then the url gets entered into the LMS interface for any player to play
that url.
piCorePlayer a small player for the Raspberry Pi in RAM.
I don't think idle was expected to change much. I saw a pretty big
change under heavy load and lots of disk activity.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
paul- wrote:
> Do you have the rip onboard audio enabled or disabled? The card number
> should be auto detected once you install the streamer. What is the url
> that you are entering to play?
onboard audio is disabled. I tried enabling and disabling, rebooting and
it's the same in both
Here you can find the documentation which pins are used by the different
Hifiberry boards:
https://www.hifiberry.com/build/documentation/gpio-usage-of-hifiberry-boards/
carsten_h's Profile:
Thanks for the tips.
I'l try to work with the options on the tweaks page.
BTW, pin 5 is already in use by the Hifiberry board, but it might be
possible to use it also for the shutdown. I'll just have to try. After
all what could go wrong:rolleyes::rolleyes:
Greg Erskine wrote:
> hi JadeMonkee,
>
> I occasionally get this error message as well. I have found if I just
> reboot everything is OK.
>
> Worth a try. :)
>
> I was having a look yesterday and couldn't see a coding error so I
> suspect a timing issue.
>
> regards
> Greg
Oh haha.
I am struggling to get Jivelite to work on a Pi 3B+ with a standard
touchscreen under 5.0.1. I am running what I think is a fully updated
system (10.1pCP, PCP 5.0.1, and Squeezelite 1.9.2-1166-pCP). As far as
I remember, this all worked fine on the same device in 4.1.1.
The wrinkle in my
Man in a van wrote:
> I have just performed the USB firmware upgrade on a rpi4b (4gb) just
> running LMS.
>
>
> No significant difference that I can see.
>
> ronnie
Same here, perhaps an average of 1°C lower with the update. Not quite
the icy blast I was expecting. :(
27715
I have just performed the USB firmware upgrade on a rpi4b (4gb) just
running LMS.
The pi is on my desk, no case, suported by a BIC (other biro's are
available) just to allow some ait to circulate underneath the board :p
This is the temp chart with the pi at idle
27712
This is the reading
thanks mate. Will get back to you. Is that downloaded zip file a LMS
server, I have seen they are trying to upgrade firmware to cool the pi4
down a bit.
NE5's Profile: http://forums.slimdevices.com/member.php?userid=66846
That reads from the analog inputflac or mp3 is the streaming format.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Hi Paul,
i have selected "Streamer for Line Input" on the tweaks page. The
example box shows the flac and MP3 command structure. But i would like
to use analog stereo input. Could you provide an command example for
analog stereo input?
1 SB3, 1xRadio, 1x Picoreplayer with Hifiberry DAC, 3x
12 matches
Mail list logo
