M-H wrote:
>
> So set the usercommand in the tweaks and rebooted .
> And it worked right away.
>
Grumpy Bob wrote:
> I've added this to my install - works well, and everything's working
> sweetly.
>
Great - thanks to both of you for letting me know. Looks like we're
there in principle.
Hello!
Today I found an interesting case for a Pi zero W with a display and
buttons included (German):
https://www.berrybase.de/raspberry-pi-co/raspberry-pi-zero/gehaeuse/gpi-case-handheld-gaming-geh-228-use-f-252-r-raspberry-pi-zero
Here is the link to the creators website (English):
chill wrote:
> Will this be robust?
>
> (code snipped)
>
> In testing this I noticed that I will often get that 'initMboxBlock:
> init mbox zaps failed' error if I kill pigpiod with just 'sudo kill -9
> '. It seems to leave something behind. But if I instead use 'sudo
> killall pigpiod',
Hello!
I am using an installation on a Pi 4 of piCorePlayer only for the LMS
part. So I disabled Squeezelite for it which is working at normal system
start without any problems. But when I am starting an Update/Full Update
on the main page Squeezelite will be started afterwards.
It's not a real
a new beta/final version seems near as I have seen 4.19.97 modules in
the repo. can't wait.
mcduman's Profile: http://forums.slimdevices.com/member.php?userid=66702
View this thread:
Most using HDMI want bitperfect. If you change from 0db, then the
stream is no longer bitperfect.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Quick question about the output level settings for HDMI output - what
are the benefits/deficits from setting the output to 100% (4db) or 96%
(0db)?
stereoptic's Profile:
Should be able to set the DSD option to
:dop
29201
+---+
|Filename: 2020-01-28_20-08.png |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=29201|
Hi-
I have DSDPlayer installed n my LMS server, and in it's settings for pCP
it says I can play DSD back natively. That's good, but I actually want
to convert DSD to PCM so I can also apply room correctiion to DSD
files.
My present settings don't give me that option. How can I setup the
Maybe it has a little bit more or less sectors.
carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113
View this thread: http://forums.slimdevices.com/showthread.php?t=110727
FWIW: I used a WD Elements 10TB before this HDD which did not introduce
16MB of something. I just checked and that one is GPT partitioned too.
Supertramp's Profile: http://forums.slimdevices.com/member.php?userid=30362
Thanks.
It's GPT.
Supertramp's Profile: http://forums.slimdevices.com/member.php?userid=30362
View this thread: http://forums.slimdevices.com/showthread.php?t=110727
___
unix
Supertramp wrote:
> I just connected the drive to my PC and Disk Management shows this:
>
> 29200
>
> Not sure where I can find any info regarding GPT or MBR?
Right Click on "Disk 9" then properties then volumes tab
Jeff
*Players:* SliMP3,Squeezebox3
Supertramp wrote:
> Just one partition which uses the complete available space.
Which partitionformat did you used? GPT or MBR? Maybe the other one is
using the 16MB. :-)
carsten_h's Profile:
Thanks.
Yes, it is initiated, partitioned and formatted. Just one partition
which uses the complete available space.
Supertramp's Profile: http://forums.slimdevices.com/member.php?userid=30362
View this thread:
Supertramp wrote:
> I recently bought a WD Red 10TB HDD
Did you partitioned the drive when you got it (you should always do it
with new drives, because you don't know what is installed)?
Maybe it is the rest of the drive that can not used for the partition
with the ntfs filesystem because it
Hi,
I recently bought a WD Red 10TB HDD which I use in a Raidsonic Icy Box
enclosure. When mounting this USB HDD to pCP 6.0.0, the drive gets
mounted as well as a 16MB "something else".
29197
Although all works very well, I am just wondering what this "something
else" could be? The Icy Box
chill wrote:
> Will this be robust?
>
Thanks Chill.
I quickly grabbed my pi-zero and replaced the start of sbpd-script.sh,
and fired it up as superuser.
Succes first time !
So set the usercommand in the tweaks and rebooted .
And it worked right away.
So instead of going over the 'full
M-H wrote:
> I had seen those too, and wondered why they would need so much wires?
> SPI + power =
> I haven't read up on the documentation, so I can't really tell.
>
VCC Power (3.3V input)
GND Ground
DIN SPI data input
CLK SPI clock input
CS Chip selection, low active
DC
chill wrote:
> I have one of 'these' (https://www.amazon.co.uk/gp/product/B07MH93747)
> arriving today. No buttons or audio,
I had seen those too, and wondered why they would need so much wires?
SPI + power =
I haven't read up on the documentation, so I can't really tell.
And I found
By the way, when I copied the Pirate Audio configuration into the
modprobe commands, the change from speed=3200 to speed=1600 was
a mistake - the menu 'slides' in Jivelite have some noticeable tearing
with the slower speed. 3200 is good, and 6400 may be even
better, but barely
paul- wrote:
> pigpiod is a forking daemon, not sure how long it takes to initialize
> internally. Rather than a a set sleep timer, it would probably be best
> to query the daemon to make sure it's started.
Will this be robust?
Code:
#!/bin/sh
# start pigpiod
JaMo wrote:
> Will do.
>
> I have ordered another RaspberryPi 4B and will do it in a more
> structured way with that one. Today was loan-pi and alot of trial and
> errors. I will document it down and post.
> /Jan
This is not so easy. I got the Pi4B+ 2GB today. Flashed on pCP 6.0.0-b7.
Chosed
castalla wrote:
> I have installed pcp 5.0 . What's the best method to make a copy of
> the image ? Preferably using linux.
dd is the easiest. Just make sure you use the correct devices. Just
google it, there is tons of how-to out there.
piCorePlayer a small player for the Raspberry
pigpiod is a forking daemon, not sure how long it takes to initialize
internally. Rather than a a set sleep timer, it would probably be best
to query the daemon to make sure it's started.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please
M-H wrote:
>
> The buttons are next on my tasklist, as I stil have some errors:
> >
Code:
> > tc@pi-rate:~$ sudo /home/tc/sbpd-script.sh &
> tc@pi-rate:~$ 2020-01-27 22:02:36 initMboxBlock: init mbox zaps failed
> Can't initialise pigpio library> >
>
> I get the
Paul Webster wrote:
> You probably have to install rpi-vc.tcz
Yes, I found it two minutes ago.
This package was under uninstalled packages, but I don't know why? When
I first tried the script it has been working, so something has
uninstalled it.
The only thing I changed was the gpio-handler
You probably have to install rpi-vc.tcz
PCP web interface/Main/Extensions/Available
install it and then reboot
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
Paul Webster's Profile:
Aldoszx wrote:
> Have you tried to chmod 775 the argononed.py script?
Yes, I did this when creating it.
I tried vcgencmd on the shell and also with sudo and I always get "not
found". So there must be something missing. I will search which part
includes vcgencmd.
carsten_h wrote:
> I changed the second user script to "sudo python3
> /home/tc/argononed.py", but I am still getting the message that vcgencmd
> is not found.
> Should I change the call:
> >
Code:
> > temp = os.popen("vcgencmd measure_temp").readline()
paul- wrote:
> The script has to run with root permissions, as it make a call to
> vcgencmd, which requires it.
I changed the second user script to "sudo python3
/home/tc/argononed.py", but I am still getting the message that vcgencmd
is not found.
Should I change the call:
Code:
I have installed pcp 5.0 . What's the best method to make a copy of
the image ? Preferably using linux.
LMS server: Pi Zero
Amp: Denon PMA-50
Players/Speakers: Touch, Logitech Radios, Sonos Play 1s & Beam,
Libratone Zipp, GGMM E2 & E3, Yamaha WXAD-010, Loewe Airspeaker, Google
32 matches
Mail list logo
