Yeah, it probably needs a bit of a rewrite.
Setup instructions are now completely wrong.
Setup was rewritten for pCP7.0.0 with wifi now leveraging code from pCP
GUI.
I have a feeling "setup" is not used very often, nobody has commented on
it for years.
Thanks for bringing into focus.
Just in passing, IÂve found page
https://docs.picoreplayer.org/how-to/setup_wifi_on_pcp_without_ethernet/
quite confusing.
- The Âmaintained by PCP and Âmaintained by the user methods are
contrasted in title, but differ only in the use of special characters
in strings...
Meanwhile, the LMS is using almost 800 M of memory. The process is
holding a total 696 of open file handles, of which 20 are sockets, 12
are files in /mnt/mmcblk0p2/tce/slimserver/Cache/ and 656 are files in
/tmp/. All these files do actually exist, and all existing temp files
seem to be
Hi mamema,
yes you're right, but to install and configure portainer you must also
use the SSH login. If you can do that it's easy to install the LMS
container. The basic idea was to make it as simple as possible that
means only to click and install and define the three folders with the
scooper wrote:
> Tried that too and it still won't work. At this point I'll just see if I
> can get the board replaced.
> Thanks for all the suggestions.
That's a PITA !
Keep us updated please
ronnie
Man in a van's
Greg Erskine wrote:
> I was a user of Etcher
I used it too, but after the Release of "Raspberry Pi Imager" I don't
know why to use another tool. There you can directly choose the standard
Raspberry OS or a few others like LibreELEC and so on or you can choose
an image. I don't need any other
scooper wrote:
> Thanks for the suggestions Ronnie. This might be something to tackle
> tomorrow ;)
Tried that too and it still won't work. At this point I'll just see if I
can get the board replaced.
Thanks for all the suggestions.
On the latest picoreplayer version with the latest pcp_shairport-sync I
encounter an issue with the service propagation for Airplay:
Right after startup shairport-sync propagates to my iPhone (iOs 14.4). I
can play music a desired.
Then after a while shairport-sync vanishes and does not show up
Grumpy Bob wrote:
> If you are running Material, it has "Shutdown" and "Restart" options
> when you're in Server Settings - Click the three dots on the top right
> of the screen.
>
> RobertIt does but if shutdown stops LMS how would you start it again?
Sent from my Pixel 3a using Tapatalk
If you are running Material, it has "Shutdown" and "Restart" options
when you're in Server Settings - Click the three dots on the top right
of the screen.
Robert
*Home: *Raspberry Pi 4/pCP7.0/LMS8.0.1/Material with files on QNAP
TS-251A
Touch > DacMagic 100 > Naim Audio Nait 3 > Mission 752
Man in a van wrote:
> which OS is the LMS running on ?
>
> pCP has a stop button on the LMS Tab page
>
> If using Rapberry pi os, open a terminal and type
>
> sudo service logitechmediaserver stop [status, start, restart]
>
> or
>
> sudo /etc/init.d/logitechmediaserver stop
>
> there is
rbl wrote:
> A dumb question - how do I stop LMS on the Pi? I can't find the control
> panel that I'd use in Windows to do this, and I'd rather not just
> terminate the process. I am trying to copy an old copy
> /var/lib/squeezeboxserver/prefs over and it seems prudent to stop LMS
> first.
A dumb question - how do I stop LMS on the Pi? I can't find the control
panel that I'd use in Windows to do this, and I'd rather not just
terminate the process. I am trying to copy an old copy
/var/lib/squeezeboxserver/prefs over and it seems prudent to stop LMS
first.
SB3 -> Quad 909 -> Quad
ralphy wrote:
> The -Airplay is append in /usr/local/etc/init.d/shairport-sync and I
> think it overrides the name setting in the config file.
> For changes to persist in the config file across reboots you need to add
> usr/local/etc/shairport-sync.conf to /opt/.filetool.lst and backup your
>
14 matches
Mail list logo
