chill wrote:
> Is it rebuffering or are there just regular 'gaps'? Does it still do it
> if only playing on one player?
>
> If it's just gaps, and it doesn't do it when playing to a single player,
> try just restarting LMS from within the pCP interface.
it stops music rebuffering for some
nervoteso wrote:
> ok try without case. anyway, music is rebuffering on multiple players,
> on piu3 there was not rebuffering with flac files
Is it rebuffering or are there just regular 'gaps'? Does it still do it
if only playing on one player?
If it's just gaps, and it doesn't do it when
I would just like to say thanks guys. Great job! I installed Beta 6 on
my RPI4 and it runs perfectly. I am using an aluminium heat-sink case
and it runs at around 46C, although I am under-clocking it.
fsger's Profile:
Depending on where you got your board from, it may not have the latest
firmware. I just checked, and RPI has moved the VLI chipset update to
critical status.
You can update using pCP, but you need to follow these instructions.
Paul Webster wrote:
> Try taking the lid off the official case and see what difference it
> makes.
ok try without case. anyway, music is rebuffering on multiple players,
on piu3 there was not rebuffering with flac files
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso wrote:
> no ventilation
Try taking the lid off the official case and see what difference it
makes.
Paul Webster
http://dabdig.blogspot.com
Author Radio France (FIP etc) plugin
Paul Webster's Profile:
nervoteso wrote:
> it's the official case (white and red)im' playing multiple
> squeezeboxes, now music is rebuffering...sgrunt
Do *NOT* use that case, it's not fit for purpose, bin it and use without
until you get a decent one!
*Server - LMS 7.9.2 *Pi4B 4GB/pCP 6.0.0-b6 18K library,
paul- wrote:
> Thats about where the CPU throttles itself. A heatsink alone wont help,
> you need some ventilation in the case...or a small fan.
>
> What case is it in?
in that box there are 3 heatsink, do i use them? where? music is
rebuffering a lot, i think i come back to pi3
paul- wrote:
> Thats about where the CPU throttles itself. A heatsink alone wont help,
> you need some ventilation in the case...or a small fan.
>
> What case is it in?
it's the official case (white and red)im' playing multiple
squeezeboxes, now music is rebuffering...sgrunt
nervoteso wrote:
> it says 75
That's pretty high!
Here's mine using 'this case'
(https://kodi.tv/article/flirc-kodi-edition-raspberry-pi-4b-case)
I swapped the "Kodi" lid for a plain black one I already had from a Pi3,
looks good :)
28432
nervoteso wrote:
> it says 75
I think it throttles at 80.
Now try a clear and rescan and see if it changes much - or play local
music to multiple Squeezeboxes at the same time or proxied streaming or
Spotify etc.
Is it in a case with ventilation? Can the air rise and escape through
holes?
Is
nervoteso wrote:
> it says 75
Thats about where the CPU throttles itself. A heatsink alone wont help,
you need some ventilation in the case...or a small fan.
What case is it in?
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please
paul- wrote:
> That is a really good question. The Pi4 with throttle itself, so you
> won't hurt it with no heatsink.
>
> What kind of case do you have? You can graph your CPU temp.
>
> Enable Beta mode in pCP.
> Click on the Extras Button
> Click on CPU Temp
> You will see a graph that
That is a really good question. The Pi4 with throttle itself, so you
won't hurt it with no heatsink.
What kind of case do you have? You can graph your CPU temp.
Enable Beta mode in pCP.
Click on the Extras Button
Click on CPU Temp
You will see a graph that looks like a "V" (That means
lms is working here perfectly on pi4 . very fast and no buffering!
where should i put heatsink i found in the pi4 box? is it necessary?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's
anadigi wrote:
> Thanks! I will do it next time.
> BTW, I have forced the PI 3B+ to run 64 bit and it runs fine!
Running fine in 32bit mode :)
The pCP image does not have a 64bit kernel for the pi3B+. I don't plan
on supporting that either.
piCorePlayer a small player for the Raspberry Pi
slartibartfast wrote:
> In general it is better to put information as text in the main body of
> the post rather than in the title. Viewers like Tapatalk don't show
> titles.
>
> Sent from my SM-G900F using Tapatalk
Thanks! I will do it next time.
BTW, I have forced the PI 3B+ to run 64 bit
anadigi wrote:
> NtIn general it is better to put information as text in the main body of
the post rather than in the title. Viewers like Tapatalk don't show
titles.
Sent from my SM-G900F using Tapatalk
anadigi wrote:
> Nt
Bottom of page, if it says v8 it's 64bit.
28431
+---+
|Filename: v8.jpg |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=28431|
Nt
anadigi's Profile: http://forums.slimdevices.com/member.php?userid=65102
View this thread: http://forums.slimdevices.com/showthread.php?t=110727
___
unix mailing list
Paul Webster wrote:
> Have a look at this recent thread to see if it helps
> https://forums.slimdevices.com/showthread.php?12-Migrating-from-LMS-on-RedyNas-to-LMS-on-PI(absolute-beginner!!!)
thanks. it seems now it is analysing music. fingers crossed
Touchx2,radiox4, Squeezebox Server
nervoteso wrote:
> new issue: i set qnap folder (network mount) "music" but no music found.
Have a look at this recent thread to see if it helps
https://forums.slimdevices.com/showthread.php?12-Migrating-from-LMS-on-RedyNas-to-LMS-on-PI(absolute-beginner!!!)
Paul Webster
new issue: i set qnap folder (network mount) "music" but no music found.
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile: http://forums.slimdevices.com/member.php?userid=30262
paul- wrote:
> You will need to use a keyboard and monitor.
>
> When booting is done, you can run setup and switch it back to dhcp.
>
> It seems the reboot box is popped up too early. Make sure you cancel
> the first time..I'll have to fix that. (There is a reason that
> Static IP
You will need to use a keyboard and monitor.
When booting is done, you can run setup and switch it back to dhcp.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
new issue: i've set ip static, save, and now i can't see picoreplayer
anymore. in the menu od pi4 says newtork not found. how to return to
dhcp? i can't see picoreplayer menu
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
kidstypike wrote:
> You deleted the lines? You should've edited them!
not deleted! i added! sorry i wrote bad
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
nervoteso wrote:
> i've opned config.txt but should i modify? it's written exactly the same
>
> now i see this in the config (what should i modify?):
>
> PI4]
> initramfs pcp_10.2v7l.gz followkernel
> kernel kernel41973v7l.img
> dtoverlay=vc4-fkms-v3d
> max_framebuffers=2
> ### Previous 4
nervoteso wrote:
> edited config, i plugged pi4 power, hdmi and ethernet, but it doesn't
> work anything. i just see a colored image. can't see any ip in the
> network. i'ven't formatgted sd, should have i formatted?
You deleted the lines? You should've edited them!
*Server - LMS 7.9.2
edited config, i plugged pi4 power, hdmi and ethernet, but it doesn't
work anything. i just see a colored image. can't see any ip in the
network. i'ven't formatgted sd, should have i formatted?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
Man in a van wrote:
> Pop the SD card back into a card read and put the reader into a
> computer.
>
> Open the boot parttion and then open config.txt in an editor.
>
> Edit the file, save and exit.
>
> 28428
>
>
> There now appears to be only two lines to comment out, so you can either
>
Man in a van wrote:
> Pop the SD card back into a card read and put the reader into a
> computer.
>
> Open the boot parttion and then open config.txt in an editor.
>
> Edit the file, save and exit.
>
> 28428
>
>
> There now appears to be only two lines to comment out, so you can either
>
paul- wrote:
> For those running 64 bit on your pi4's. Have you seen any problems.
> I'm considering making that the regular/only pi4 kernel for pCP.
>
> The only problems I've seen on the RPI forums are mainly related to
> Display drivers and graphical interfaces.
No problems here, but
nervoteso wrote:
> should i install raspbian os before of can i install directly
> picoreplayer on pi4?
No. piCorePlayer is itself an operating system.
On a Pi4 you need
https://repo.picoreplayer.org/insitu/piCorePlayer6.0.0/piCorePlayer6.0.0.zip
*Server - LMS 7.9.2 *Pi4B 4GB/pCP 6.0.0-b6
should i install raspbian os before of can i install directly
picoreplayer on pi4?
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and qnap ts-269)
nervoteso's Profile:
For those running 64 bit on your pi4's. Have you seen any problems.
I'm considering making that the kernel for pCP.
The only problems I've seen on the RPI forums are mainly related to
Display drivers and graphical interfaces.
piCorePlayer a small player for the Raspberry Pi in RAM.
kidstypike wrote:
> Sorry, Chrome is affected too, when the Player/Server mode is selected.
Its a font selection.our css is using "font-family: verdana,
arial, sans-serif;" Verdana is on on my linux system, so it uses
arial. Verdana is obviously a "wider" font. I'll make
Man in a van wrote:
> Pop the SD card back into a card read and put the reader into a
> computer.
>
> Open the boot parttion and then open config.txt in an editor.
>
> Edit the file, save and exit.
>
>
>
>
> There now appears to be only two lines to comment out, so you can either
>
Pop the SD card back into a card read and put the reader into a
computer.
Open the boot parttion and then open config.txt in an editor.
Edit the file, save and exit.
28428
There now appears to be only two lines to comment out, so you can either
procede or wait until someone else replies.
paul- wrote:
> I have published a new beta
> image.https://repo.picoreplayer.org/insitu/piCorePlayer6.0.0/piCorePlayer6.0.0-b4.zip
>
> See info in the
> OP...https://forums.slimdevices.com/showthread.php?110727-BETA-piCorePlayer6-0-0-PI4-support=944664=1#post944664
>
> For only the pi4, I
I wanted to try an in situ update from Beta 5 to Beta 6 on my Pi 3B, so
dug out the spare microSD card running Beta 5 which I'd not used for a
week or two. Although it booted and managed to acquire an IP address
from my router, I wasn't able to connect to it via the browser or SSH
even after
paul- wrote:
> Thx, Ill check.
Sorry, Chrome is affected too, when the Player/Server mode is selected.
*Server - LMS 7.9.2 *Pi4B 4GB/pCP 6.0.0-b6 18K library, playlists & LMS
cache on SSD (ntfs)
*Study -* Pi3B+/pCP 5.0.0/pi screen/HiFiBerry DAC+/jivelite,
*Lounge* - Pi2/pCP 5.0.0 >
kidstypike wrote:
> I did notice the problem with the mode buttons myself, refresh makes no
> difference. Browser if Firefox on W10.
>
> Chrome browser seems fine.
Thx, Ill check.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please
paul- wrote:
> What browser is that kidstypike?
>
> Looks like the css is being cached. If you do a forced refresh, does
> the mode button look not overlapped?
I did notice the problem with the mode buttons myself, refresh makes no
difference. Browser if Firefox on W10.
Chrome browser
What browser is that kidstypike?
Looks like the css is being cached. If you do a forced refresh, does
the mode button look not overlapped?
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
You can try. I just didnt have anything running B1 to test. Worst
that happens is you have to burn a new image.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
chill wrote:
> If I wait long enough, is it likely that I'll to be able to do an insitu
> update from b1, or is it just better to bite the bullet and reinstall
> now?
Sorry - being stupid. My b1 installation on a Pi4 is obviously not
running the 64-bit kernel, so to get that I understand that
paul- wrote:
>
> For those running a 6.0.0 beta, insitu update to Beta6 is availiable.
> Although, I would only try from Beta 4 or 5.
>
If I wait long enough, is it likely that I'll to be able to do an insitu
update from b1, or is it just better to bite the bullet and reinstall
now?
paul- wrote:
> I just pushed up Beta 6. See the OP for 'details'
> (https://forums.slimdevices.com/showthread.php?110727-BETA-piCorePlayer6-0-0-PI4-support=944664=1#post944664).
In situ update on my Pi4/4GB from B5 (64bit kernel) to B6 went without
problem.
Thanks
28418
I just pushed up Beta 6. See the OP for 'details'
(https://forums.slimdevices.com/showthread.php?110727-BETA-piCorePlayer6-0-0-PI4-support=944664=1#post944664).
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
cobrasu wrote:
> Could you pros kindly make a project that support boot from USB3.0 SSD
> or USB3.0 Flash driver and it can resize USB drive partition by
> PiCoreplayer itself.I find audio quality from USB driver is better than
> that boot from SD card.Now I select boot from USB2.0 flash drive
nervotoso,
Please read this thread, it's not that long, and everything is covered
in here.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
hello
just ordered pi 4 (4gb). i would like to install on it picoreplayer
6.0.0, can you tell me some guide to do that? someone told me something
about 64 bit kernel: what should i do exactly? is it not enought install
6.0.0? thanks
Touchx2,radiox4, Squeezebox Server 7.9 (Raspberrypi 3 and
Could you pros kindly make a project that support boot from USB3.0 SSD
or USB3.0 Flash driver and it can resize USB drive partition by
PiCoreplayer itself.I find audio quality from USB driver is better than
that boot from SD card.Now I select boot from USB2.0 flash drive rather
than SD card,and
I did use the beta 5b for USBridge.
Tested the same image on an rpi and it worked. But i noticed that the IP
only showed up in the router for 2 seconds and then dissapeared.
I could login with the ip that was shown.
There i put in a fixed ip adress and booted the USBridge. Now i can
login and
Pi4 4Gb. Beta5 works fine with usb xmos devices and digi spdif hat.
Tested 64bit version too. Tested LMS within pi4. Everything works ok.
In fact all works flawlessly.
starbender's Profile:
You are using Beta5, correct? I don't have a USBridgeSig, so I cannot
test, but I supplied the B5 image to Allo and Greg Stewart, and they
have no problems.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Ok
in Windows (10) file explorer i made a file netusb on the boot partition
pcp-boot on the sd card.
No extension. so it is simular to the ssh file for example that is
allready on the sd card.
No luck.
At a normal boot it shows up as a client in my router. Now it does not.
The USBrideSig doesnt have a standard network or USB driver, it uses a
special driver that is in the netusb package.
Make an empty file called netusb on the boot drive, and you should be
fine.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Hi,
I downloaded the beta images yesterday and both versions did not work on
the USBridge signature.
In the router no ip adress came up. So i guess the lan driver did not
work or could it be that the images i downloaded have still the
partition problem mentioned above?
wkaa,
I just got home from a week traveling. I confirmed the problem was in
the way the images are built. I would suspect that the latest Raspbian
image will no longer work either. Something to do with partitions. I
reverted to using fdisk and that solved the problem. I'll get an
updated
Trying latest beta on pi4 4gb. Somehow it stucks at expand sd card. Both
red and green leds of pi light up and stays there forever.
Anyone has the same problem?
starbender's Profile:
paul- wrote:
> If you are not even getting the rainbow, then its not even recognizing
> the usb stick. Ive never done this on a pi3b+, I on do this on my
> 3Bs. Not sure what the issue could be, but I did just change the
> partition alignment to mimic Raspbian in b5. Ill have to check
If you are not even getting the rainbow, then its not even recognizing
the usb stick. Ive never done this on a pi3b+, I on do this on my
3Bs. Not sure what the issue could be, but I did just change the
partition alignment to mimic Raspbian in b5. Ill have to check it
out.
Waitusb is
paul- wrote:
> IÂll have to check the automated resize on non SD cards, just resize
> it by hand.
>
> As for the 6.0 image, are you getting the rainbow? Likely you need to
> increase the waitusb value on the kernel command line
There was no Rainbow, the screen keeps Black. The waitusb
Ill have to check the automated resize on non SD cards, just resize it
by hand.
As for the 6.0 image, are you getting the rainbow? Likely you need to
increase the waitusb value on the kernel command line
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
Hello,
my Hardware is a Pi3 Model B+ 2017
I tried to install the 6.0.0b5 on a USB Stick (The stick boots with
raspian), but the PiCorePlayer was not booting.
Then I used version 5.0.0 and it was booting using the USB stick, YEAH!
One question:
As it is a 8GB USB Stick, I wanted to use the
paul- wrote:
> You should be able to create a custom user managed wpa_supplicant.conf
> file with both WiFi networks in it.
Ok. That is interesting, I didn't know that there are many entries
possible.
I think the file is placed inside the partition (boot) I can see when
the SD card is mounted
carsten_h wrote:
> I have a 3B+, so I do not have to change anything. That is great!
>
> Another question is the following:
> At home I am using the piCorePlayer (with LMS activated) with Wifi. So I
> have entered the SSID and the password for my home Wifi.
> As the piCorePlayer inside the
paul- wrote:
> Yes. But you will need to program your RPI board to do it.
I have a 3B+, so I do not have to change anything. That is great!
Another question is the following:
At home I am using the piCorePlayer (with LMS activated) with Wifi. So I
have entered the SSID and the password for
carsten_h wrote:
> Hello!
>
> Is it possible to boot piCorePlayer on a Raspberry Pi 3B+ from an USB
> stick rather than from the SD card?
> I am asking because it is easier to change an USB stick that the SD card
> when the Pi is mounted inside a Smartipi case.
> In the moment I have the SD
Hello
Doesn't it work properly?
If I reboot picoreplayer, it no longer finds my hard disk connected. I
disconnect, reconnect the DD, nothing happens.
To succeed, I changed DD, this one was recognized. I handed over the DD
from the beginning and, finally, it is recognized.
Will I have to do
Hello!
Is it possible to boot piCorePlayer on a Raspberry Pi 3B+ from an USB
stick rather than from the SD card?
I am asking because it is easier to change an USB stick that the SD card
when the Pi is mounted inside a Smartipi case.
In the moment I have the SD card with the piCorePlayer
kidstypike wrote:
> Burned pCP 6.0.0-b5 to an 8GB SD card and booted my Pi4/4GB that has
> been running 6.0.0-b1 for the last few months without problem.
>
> Setup went without problems, however scanning my SSD HDD (NTFS) was so
> pitifully slow, as to be unacceptable. (Yes, I'd installed
edwin2006 wrote:
> Did you use a 2.5A or 3A power supply?
2.5A official PSU - purchased at the same time I acquired the Pi 3B
about 2 and a half years ago.
I've just remembered that although I've had PiCorePlayer working fine
with an external HD before, it was with a different drive. I can
JQW wrote:
> It's a power issue - I was overloading the Pi PSU by trying to power an
> external HD via USB. I couldn't get WiFi to work by editing the
> wpa_supplicant.conf file either - but on disconnecting the USB HD it's
> again working fine. I'll go back to storing my music on couple of
Thanks for letting us know how you solved it.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
(https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted)
It's a power issue - I was overloading the Pi PSU by trying to power an
external HD via USB. I couldn't get WiFi to work by editing the
wpa_supplicant.conf file either - but on disconnecting the USB HD it's
again working fine. I'll go back to storing my music on couple of thumb
drives for now.
Hmm, I'm getting exactly the same error with piCorePlayer 5.00. I didn't
used to - perhaps my Pi 3B has failed.
JQW's Profile: http://forums.slimdevices.com/member.php?userid=66930
View this thread:
Tried doing a backup after a WiFi change, and rebooting. I get exactly
the same problem, WiFi not working.
On the WiFi configuration pane under "WiFi information" to the right of
the MAC address is displayed "Wifi IP: is missing - [Reboot] or [Save]
to connect."
chill wrote:
> Are you doing a 'backup' before rebooting?
No, I'm not. I'll have another go later today whilst doing a backup
after making the WiFi change.
JQW's Profile:
paul- wrote:
> If you didnt manually change, then you are running the 32 bit kernel.
> The 4GB version is quite crippled under 32bit. Although not sure what
> changed during beta 1 and beta 4.. Try setting up the 64bit kernel.
>
>
kidstypike wrote:
> Which kernel do I need to be using to get LMS to scan my NTFS formatted
> SSD HDD?
>
> And how do I select/choose the required kernel?
If you didnt manually change, then you are running the 32 bit kernel.
The 4GB version is quite crippled under 32bit. Although not sure
JQW wrote:
> I've the device connected via Ethernet, and then attempt to set WiFi via
> the user interface. It connects fine, until I come to reboot, when it
> fails to connect.
Are you doing a 'backup' before rebooting?
Having problems with Beta 6 with WiFi using a Pi 3B. I've the device
connected via Ethernet, and then attempt to set WiFi via the user
interface. It connects fine, until I come to reboot, when it fails to
connect.
Unfortunately I wasn't able to connect a screen to the HDMI port to see
if there
paul- wrote:
> Which kernel are you trying..I'm running the 64bit kernel, but my
> external drive is ext4.
Which kernel do I need to be using to get LMS to scan my NTFS formatted
SSD HDD?
And how do I select/choose the required kernel?
*Server - LMS 7.9.2 *Pi4B 4GB/pCP 6.0.0-b1 18K
paul- wrote:
> That is not integrated. Support for devices doing this in Bluezalsa is
> very limited.
Ok, thank you for clarification! I don't need it really, as I am
controlling the piCorePlayer with the Logitech Harmony Companion remote
via the Harmony Hub and a FLIRC-USB dongle.
carsten_h wrote:
>
> I want to send the commands from my headphones. The headphones can send
> next/previous track or play/pause to the connected device like a
> smartphone or a Mac/PC or whatever. This must be bluetooth commands
> handled by the device.
That is not integrated. Support for
paul- wrote:
> managing different squeezelite settings would be difficult for each of
> the potential outputs would be tricky
Yes, I think so. It's not so important for me, I only saw it.
paul- wrote:
> What do you mean about bluetooth commands for next/previouswhere do
> you want to
carsten_h wrote:
> Yes, in the main menu I got an entry "choose piCorePlayer" (I don't now
> the exact english name). There I can choose a player named like my
> Headphones. Also it is possible to play different music on both players.
> I don't now when to use it, but it is great!
> The only
chill wrote:
> then they should show up as a player in LMS, with the name assigned in
> pCP.
Yes, in the main menu I got an entry "choose piCorePlayer" (I don't now
the exact english name). There I can choose a player named like my
Headphones. Also it is possible to play different music on
paul- wrote:
> Which kernel are you trying..I'm running the 64bit kernel, but my
> external drive is ext4.
Now don't laugh . . . er, do I have a choice? :)
*Server - LMS 7.9.2 *Pi4B 4GB/pCP 6.0.0-b1 18K library, playlists & LMS
cache on SSD (ntfs)
*Study -* Pi3B+/pCP 5.0.0/pi
Which kernel are you trying..I'm running the 64bit kernel, but my
external drive is ext4.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Burned pCP 6.0.0-b5 to an 8GB SD card and booted my Pi4/4GB that has
been running 6.0.0-b1 for the last few months without problem.
Setup went without problems, however scanning my SSD HDD (NTFS) was so
pitifully slow, as to be unacceptable. (Yes, I'd installed additional
filesystems).
Went
carsten_h wrote:
> Hello!
> How is it now possible to use the headphones as audio output? I read the
> thread here but I didn't found the solution or maybe I just missed the
> page.
> Can the output switched between bluetooth and Hifiberry on the
> touchscreen or has it to be switched by
Hello!
I switched (new install) today from version 5 to version 6b5 without any
problem on my 3B+! Great work!
The integration of HFS+ works also via installation of util-linux.tcz
without any problems. Great!
Now I wanted to try the new Bluetooth feature. I switched on Bluetooth
loaded the
Paul Webster wrote:
> That particular image came from iPeng because I could easily upload it
> to the forum using Tapatalk.
> However, the embedded web page come from the LMS web interface.
> Settings/Player//Audio
Thank you again paul.
I discover or rediscover LMS. Case settled
Cdlt
Not yet..that is one of the things I've been working on. There is
not much change between b4 and b5. The OP has the change log.
https://forums.slimdevices.com/showthread.php?110727-BETA-piCorePlayer6-0-0-PI4-support=944664=1#post944664
piCorePlayer a small player for the Raspberry
paul- wrote:
> The beta works on all boards. The 64-bit kernel is only built for the
> RPI4, I am not going to build 64 bit kernels for the older boards.
>
> There is no way to upgrade from 5.x, as the boot partition has increased
> in size.
Hi,
maybe I missed it but is there an easy way
paul- wrote:
> Phone -> Bluetooth Sink -> pcp-Streamer -creates a playable stream
> of what is coming from your phone. Then point whatever player you want
> to play the stream. (You can create a favorite on LMS)
I will install the latest beta and try this out. Thanks!
1001 - 1100 of 1336 matches
Mail list logo
