brambil wrote:
> I looked to your python code, I will merge some of yours mods in mine
> and share. In particular your conversion to Python 3 is better than mine
> and also the revisiting of LMS info extraction.
>
> On my side I removed everything about volume control and fixed the
> volume
I looked to your python code, I will merge some of yours mods in mine
and share. In particular your conversion to Python 3 is better than mine
and also the revisiting of LMS info extraction.
On my side I removed everything about volume control and fixed the
volume control inside LMS (I leave
brambil wrote:
> Dear!
> I was trying to do something like what you did using dietpi.
>
> Do you plan to put your script on Github or to share in any other way?
Yep - happy to share it however you like. It started off as a deitpi
download from Audiophonics, but that was a) not on PCP which
Dear!
I was trying to do something like what you did using dietpi.
Do you plan to put your script on Github or to share in any other way?
brambil's Profile: http://forums.slimdevices.com/member.php?userid=72544
View this
If anyone wants it, I've built a fresh PCP 8.1.0 image and just
installed the updates for the second screen, infra red etc.. So, it's
just a stock image with the changes to make it work with the EvoSabre.
I've also updated the script so that it'll discover the LMS server so
you don't have to
pmendiuk wrote:
> The rotary knob just cycles through the various inputs on my units, I
> don't see anything about display. Maybe different firmware.
Sorry - my fault. I was going from memory and thought it was on the
rotary knob. Doh. It's on the remote instead. It's the blank button
on
The rotary knob just cycles through the various inputs on my units, I
don't see anything about display. Maybe different firmware.
pmendiuk's Profile: http://forums.slimdevices.com/member.php?userid=62342
View this
pmendiuk wrote:
> Have you done anything with the Nuvoton processor on the Evo-Sabre
> board? I would like to be able to put the left display into an "off" or
> screen saver state without powering down the board. I would also like
> to be able to select a specific input rather than cycle
Have you done anything with the Nuvoton processor on the Evo-Sabre
board? I would like to be able to put the left display into an "off" or
screen saver state without powering down the board. I would also like
to be able to select a specific input rather than cycle through with the
rotary
Now you've got it working, please let me know if you have any questions.
comments or suggestions.
psketch's Profile: http://forums.slimdevices.com/member.php?userid=56555
View this thread:
pmendiuk wrote:
> Thanks the image worked great. I still would like to understand why my
> manual installation couldn't find that module.
Yes, likewise would be good to know, but pleased it worked - you'll just
have to change the IP address on the user command and that should be it
I think.
Thanks the image worked great. I still would like to understand why my
manual installation couldn't find that module.
pmendiuk's Profile: http://forums.slimdevices.com/member.php?userid=62342
View this thread:
Please
pmendiuk's Profile: http://forums.slimdevices.com/member.php?userid=62342
View this thread: http://forums.slimdevices.com/showthread.php?t=114706
___
unix mailing list
pmendiuk wrote:
> I don't think I purchased the RPIs from Audiophonics.
>
> Raspberry Pi 4 Model B Rev 1.2 4GB
If you still struggle, I've created a backup of a clean pcp 8 image with
the extensions and config already done which works on my Pi4B. Happy to
share it.
I don't think I purchased the RPIs from Audiophonics. PcP 8 says RPI 4B
Revision c03112 PCB Rev 1.2 Memory: 4096
pmendiuk's Profile: http://forums.slimdevices.com/member.php?userid=62342
View this thread:
pmendiuk wrote:
> It's installed:
>
> >
Code:
> > tc@pCP:~$ tce-load -i
/etc/sysconfig/tcedir/optional/evosabre-py38-deps.tcz
> evosabre-py38-deps is already installed!
> >
>
> I started with a fresh PcP 8 install and then installed the
It's installed:
Code:
tc@pCP:~$ tce-load -i /etc/sysconfig/tcedir/optional/evosabre-py38-deps.tcz
evosabre-py38-deps is already installed!
I started with a fresh PcP 8 install and then installed the extensions
and python script.
pmendiuk wrote:
> Hi Pete,
> It looks like it's all there.
>
> >
Code:
> > tc@pCP:~$ ls /etc/sysconfig/tcedir/optional/evo*
>
> /etc/sysconfig/tcedir/optional/evosabre-py38-deps.tcz
>
> tc@pCP:~$ more /etc/sysconfig/tcedir/onboot.lst
>
> pcp.tcz
>
Hi Pete,
It looks like it's all there.
Code:
tc@pCP:~$ ls /etc/sysconfig/tcedir/optional/evo*
/etc/sysconfig/tcedir/optional/evosabre-py38-deps.tcz
tc@pCP:~$ more /etc/sysconfig/tcedir/onboot.lst
pcp.tcz
pcp-8.0.0-www.tcz
freetype.tcz
python3.8.tcz
Hi
That's saying that the module evosabre-py38-deps.tcz either didn't load
properly, or I've sent you the wrong one. This loads the dependencies
for the script, and includes netifaces.
If you do
ls /etc/sysconfig/tcedir/optional/evo*
do you see
evosabre-py38-deps.tcz
Then, if you do
I did a fresh install of PcP 8 and installed freetype.tcz, python3.8.tcz
and manually installed evosabre-py38-deps.tcz.
I'm getting an error running lms_oled_3.12_py3.py
Code:
tc@pCP:~$ python3 /home/tc/lms_oled_3.12_py3.py 192.168.1.170
Traceback (most recent call
Hmm- I'll have a look at that later. For now, I've emailed them to you.
psketch's Profile: http://forums.slimdevices.com/member.php?userid=56555
View this thread: http://forums.slimdevices.com/showthread.php?t=114706
I am experiencing an error trying to download the files.
pmendiuk's Profile: http://forums.slimdevices.com/member.php?userid=62342
View this thread: http://forums.slimdevices.com/showthread.php?t=114706
Hi pmendiuk
There's a readme.md and zip file with everything in it 'here'
(https://www.mediafire.com/folder/98508yi108e4g/EvoSabre). Let me know
how you get on.
pete S
psketch's Profile:
I am very interested on getting the second display running on PcP.
Please post the files.
pmendiuk's Profile: http://forums.slimdevices.com/member.php?userid=62342
View this thread:
I've been continuing to fiddle around with this, and have it pretty much
finished now. I've updated the script quite a bit to make it more
native to LMS (e.g. reading the track info from LMS vs. from ALSA as it
was before), reading all the info from LMS in one go rather than loads
of separate
Firstly, as with all these things, I always start - erm - blatantly
copying and learning from others. On that note, I'd like to call out
the great work done by gregex 'here '
(https://forums.slimdevices.com/showthread.php?112288-AUDIOPHONICS-RASPDAC-MINI-Kit=979971=1#post979971),
who got a lot
That sounds like a lot of work!
Thanks.
Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403
View this thread: http://forums.slimdevices.com/showthread.php?t=114706
28 matches
Mail list logo