Fine by me, I don't know the extent of the support/posts/strange
problems being created by people ignoring the warnings.
Scott Kramer
sckramer's Profile: http://forums.slimdevices.com/member.php?userid=20311
View this
sckramer wrote:
> Idea, take LMS out of the audio optimized version completely, show wifi
> in beta tab mode only with a warning, and remove any other piece that
> would not work correctly-- the LCD ui?
Why make life more difficult for the devs ? Aren't the warnings enough
?
25390
25391
I upgraded all of my players and my LMS from 3.50 to 4.0 b4 with no
problems - wired and wifi all worked just fine. The only slight anomoly
is the way it always forgets the USB settings after an upgrade, so you
have to re-enter the USB Output Settings - not a problem, but not sure
why just this
kidstypike wrote:
> Yes, but those warnings are only seen after people have downloaded/burnt
> SD card/booted RPi.
>
> The warning should be here:
>
> 25392
Well I cannot disagree ;) But it took me less than 2 minutes to change
my "Test" system from AO to standard (including burning sdcard)
Jeff07971 wrote:
> Why make life more difficult for the devs ? Aren't the warnings enough ?
>
> 25390
>
> 25391
>
> Jeff
Yes, but those warnings are only seen after people have downloaded/burnt
SD card/booted RPi.
The warning should be here:
25392
Idea, take LMS out of the audio optimized version completely, show wifi
in beta tab mode only with a warning, and remove any other piece that
would not work correctly-- the LCD ui?
Scott Kramer
sckramer's Profile:
Some time ago on this thread
https://forums.slimdevices.com/showthread.php?103330-Jivelite-for-piCorePlayer=886490=1#post886490
I asked about unblanking the leading zero in 24hr Clock screensaver.
This all worked fine but now I have a clean install of Pcp 4.0.0B and
the method does not seem to
Hi Greg. I don't think the frustration was on my part. I don't pretend
to understand what goes in to what you folks do and do well. My
misunderstanding started before 4.0 with 3.5 Audio Kernel. When I
updated insitu I saw it and tried it on all four of my pi's. Worked like
a charm. So when 4.0
LOL. Hi Jeff. Honestly, "may not" has never worked on me :-) I don't
mind giving something a stab and certainly wasn't complaining. Just
saying what happened when I tried it. I've been using 3.50 audio kernel
with success on all four of my pi's. I kind of assumed the risk might be
worth the
I agree Michael. I would still have tried it :-) I have backup .img
files and am retired. What else am I going to do with my time?
Thanks for all your work and the product :-)
Howard
mherger wrote:
> > Yes, but what about total newbies who don't know what they're doing
> > (like me) :(
>
Yes, but what about total newbies who don't know what they're doing
(like me) :(
The message should simply be: "Do not install." Anyone who installs
anyway is to blame.
--
Michael
___
unix mailing list
unix@lists.slimdevices.com
In situ update from 3.5 Audio version to 4.0 up and running, two minor
problems the Static IP had changed to DHCP whilst keeping the correct IP
addresses, so I simply changed back to Static, entered the new named IP
addresses and rebooted.
On the Squeezelite Card Control screen the Dtoverlay
sondale wrote:
> In situ update from 3.5 Audio version to 4.0 up and running, two minor
> problems the Static IP had changed to DHCP whilst keeping the correct IP
> addresses, so I simply changed back to Static, entered the new named IP
> addresses and rebooted.
> On the Squeezelite Card
paul- wrote:
> Nothing changed that should affect what you are doing.I think you
> are patching the wrong file.
>
> Should you not be patching
> /home/tc/.jivelite/userpath/applets/Clock/ClockApplet.lua
This is a possibility but I was just following Ralphys method in this
post ' #709'
willefg,
Could you please give a bit more informtion.
I have tried to get it going based on your post.
But I wounder if you installed all of the items in the req. text file
moment
python-mpd2
pyLMS
redis
pyOWM
luma.oled
socketIO-client
or did you only install luma.oled
Nothing changed that should affect what you are doing.I think you
are patching the wrong file.
Should you not be patching
/home/tc/.jivelite/userpath/applets/Clock/ClockApplet.lua
And the backup command is pcp bu, not pcp br. Is that just a typo
here on the forums?
piCorePlayer a
Hi, this is an intermittent problem I have had with one of my
picoreplayers - RPi3 + IQaudio DAC + IQaudio AMP with 7" screen and lirc
control. What happens is that after resuming play after a pause, no
sound comes out even though squeezelite appears to be working. It then
needs multiple
It's working for me on 4.0.0-b5
Would you check if the modified files are saved in the backup file?
Code:
ceo
tar -tf mydata.tgz | grep Clock
home/tc/.jivelite/userpath/applets/Clock/
home/tc/.jivelite/userpath/applets/Clock/ClockApplet.lua
Jeff,
I guess I should read our own codelol. I always do a pcp bu, then a
pcp rb...just so I can follow along.Anyway, yes, you want to
patch the file in /home/tc/.jivelite..
Paul
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage:
There is a small issue in the startup, but nothing that would affect
resuming after pause. You should go into the Card Control pages (on
the squeezelite page) and setup your mixer and then save it.
To see what is going on the play/pause, you need to turn on squeezelite
logging.
Does the IQ
Isolating the cpu prevents processes from automatically being ran on the
isolated cores... It is all about limiting latency.Does it have
any audible affect..you make the call.
Since network on the rpi is usb based..all the network traffic
generated usb intterupts. This causes
sckramer wrote:
>
>
> Was about to ask where in the world do you set custom-convert (for sox
> upsampling/shenanigans etc.)
I guess I should add more to the release notes :)Yes, that got added
in 4.0.0. Please let me know how it works for you. I think you still
have to manually
psketch wrote:
> I upgraded all of my players and my LMS from 3.50 to 4.0 b4 with no
> problems - wired and wifi all worked just fine. The only slight anomoly
> is the way it always forgets the USB settings after an upgrade, so you
> have to re-enter the USB Output Settings - not a problem,
23 matches
Mail list logo
