Hi,
I updated from pcp6 to the latest version 8 from scratch via sd card
image and bluetooth output is now broken.
"piCorePlayer v8.0.0 | www v00017 | linux 5.10.42-pcpCore-v7 (32) |
piCore v13.0 | Squeezelite v1.9.9-1386-pCP"
I am using a rpi 3b+ with an external bluetooth stick and
Thanks for the generous feedback and suggestions. I'm happy to report
that PCP and LMS are up and running, although I've still had no luck in
mounting the Zen to the LMS media library. That said I'm able to see and
play all the files on the drive via the Remote Libraries plugin--It's
just another
d6jg wrote:
> You do need a username & password to connect to your files share. Try
> root and vortexbox
WOAH! That did it! The Files folder is now mounted and and LMS is busy
scanning the 50k files. Thanks you so much d6jg, or should I say Ronnie.
I'm truly obliged.
themicksa wrote:
> Thanks you so much d6jg, or should I say Ronnie.
No you shouldn't call him Ronnie :eek:
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
No dont call me Ronnie :)
How to stop LMS on VB2.3 - from memory its - systemctl
squeezeboxserver stop
On VB2.4 its service logitechmeduaserver stop
Then you need to switch the Zen player to the new LMS. Easily done via
the web gui.
Once youve got it all going investigate Material
You do need a username & password to connect to your files share. Try
root and vortexbox
VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s
*Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s
*Dining Room* SB Boom
*Kitchen*
Not sure how you installed it, but remove it and start again. Make sure
to only use the bluetooth page on the web interface to install it.
piCorePlayer a small player for the Raspberry Pi in RAM.
Homepage: https://www.picoreplayer.org
Please 'donate'
Try the following with root / vortexbox.
I tried it today with new Core32 and worked files so should also work
with pCP.
Mount Point - /mnt/Zen
IP Address - 192.168.1.145
Share Name - files
Share Type - CIFS
Options - uid=1001,gid=50,vers=1.0
VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living
paul- wrote:
> the only way it works cleanly, is to use the newer pi3B+ of rpi4, and
> use the 5G channels for WiFi.
>
> If you only have a 2.4 WiFi availiable, you need a separate WiFi stick,
> or separate bluetooth. Get the antennas separated.
I've been doing some casual testing around the
Hello Ben, Hello Michael,
My husband and just spent the weekend getting LMS up and running on our
new TrueNAS. We got a BIG leg up with Simone's Wiki page, 'Logitech
Media Server and FreeBSD/FreeNAS' (https://audiodigitale.eu/?p=87).
To repeat what I said in the Forum thread,
paul- wrote:
> Not sure how you installed it, but remove it and start again. Make sure
> to only use the bluetooth page on the web interface to install it.
Fully installed & updated the bluetooth extension via the web interface,
after installing pcp 8 on a blank sd card.
Tried to remove it
Did somebody not call ? :p
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread: http://forums.slimdevices.com/showthread.php?t=114949
Man in a van wrote:
> Did somebody not call ? :p
:)
VB2.4[/B] STORAGE *QNAP TS419P (NFS)
[B]Living Room* Joggler & Pi4/Khadas -> Onkyo TXNR686 -> Celestion F20s
*Office* Joggler & Pi3 -> Denon RCD N8 -> Celestion F10s
*Dining Room* SB Boom
*Kitchen* UE Radio (upgraded to SB Radio)
There are about 15 different extensions with the bluetooth support.
Type these commands from an ssh session
Code:
tce-audit builddb
tce-audit delete pcp-bt8.tcz
Note any errors. Reboot if no errors.
piCorePlayer a small player for
@mherger: Am I right in believing that the current heavy hitters in LMS
maintenance prefer to keep everything documented in
forums.slimdevices.com, rather than going back to the wiki model?
The model is way less important than the maintainers of the
documentation. The problem with the old
15 matches
Mail list logo
