Re: [SlimDevices: Unix] Wireless access point on piCorePlayer?
Alright, I have something that is a bit easier to installDepending on how testing goes, we should be able to integrate this into the web interface. INSTALLATION - Go to the extension browser from the main menu. - Select piCorePlayer Sourceforge Repository - Find and Select pcp-apmode.tcz and the press the Load button - Run Backup from the main menu to backup setting changes that occurred during load. That's it, after it loads successfully, goto the wifi page and make sure that you have not disabled the rpi3 wireless chip. Then reboot. USE - Default IP address of the wifi interface is 10.10.10.1 - Default SSID is pCP - Default passphrase is piCorePlayer - Default Channel is 7 - If the ethernet cable is plugged in, then pCP will act as a DNAT router. REMOVE - start an ssh session. - tce-audit builddb - tce-audit delete pcp-apmode - Would also be good to remove the line in /opt/bootlocal.sh that runs pcp-apmode ---UNDER THE HOOD- - When pcp-apmode.tcz loads, it will automatically load all of it's dependencies, including hostapd, dnsmasq, iptables. It will also inject a startup command into /opt/bootlocal.sh - config files are at /usr/local/etc/pcp/hostapd.conf and /usr/local/etc/pcp/dnsmasq.conf paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=108341 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
Hi stereoptic. If the forth row on [Main] page says "[Install] Install FFMpeg libraries for Squeezelite" then it has NOT been installed. If it says "[Remove] Remove FFMpeg libraries for Squeezelite" then the libraries have been installed. regards Greg Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
What is the first configuration change you try to make? Can you take a screen shot just before you hit the submit/set button? I would suspect a bad SD card. paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
stereoptic wrote: > I am not sure if I installed the FFMpeg libraries. Where do I look to > verify? The install button changes to "Remove" if you have it installed paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Experimental: Bluetooth Speaker support in piCorePlayer 3.22
squeezeGoose, Seems I missed a step for you edit /opt/.filetool.lst and add /var/lib/bluetooth at the end.(I've updated the OP) Then repair your speaker. Ignore the dbus error. The bus takes a bit to start and sometimes the script tries before it's complete. But the script does keep trying. The () after the error message is actually the success. (I probably should have a better message printed :) paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=108037 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Experimental: Bluetooth Speaker support in piCorePlayer 3.22
Dan benDan wrote: > > Need to pair device. \n Please run pcp-bt-pair > Need to pair device. \n Please run pcp-bt-pair > Did you follow the directions? This message is also telling you what to do. paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=108037 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] squeezelite constant crashing
rik...@gmx.net wrote: > what do you mean by this? > > how to remove? which files are this? > > ah understood: this option. without it lms server is not accessing > right players was my exerience. I thought those addresses could be > virtual fake more or less, wrong understanding? > > > -m Set mac address, format: ab:cd:ef:12:34:56 sorry i didnt understand most of your questions... What do you mean? DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108404 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: Squeezelite - a small headless squeezeplay emulator for linux (alsa only)
Richard Kimber wrote: > Thanks. I'll try that later. I'm currently experimenting with adding -o > hw:CARD=HDAudio,DEV=0. I haven't had it going long enough to test this > properly. > > - Richard. Hi I tried this option but while adding a new -o in etc/default/sequeezelite, the -o default persists. How can I get rid of it? I have SB_EXTRA_ARGS="-V Speaker -o dmix:CARD=Device,DEV=0 -a :::0-m 00:00:00:00:00:95 -d all=debug -f /var/log/squeezelite.log" thanks rik...@gmx.net's Profile: http://forums.slimdevices.com/member.php?userid=66852 View this thread: http://forums.slimdevices.com/showthread.php?t=97046 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] squeezelite constant crashing
DJanGo wrote: > please stop squeezelite and run > /usr/bin/squeezelite -l > > try from bottom to top each of the listed device as parameter for -o > > lame is installed as well? > > why your using a mac from a xerox machine on your rpi??? what do you mean by this? how to remove? which files are this? rik...@gmx.net's Profile: http://forums.slimdevices.com/member.php?userid=66852 View this thread: http://forums.slimdevices.com/showthread.php?t=108404 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
guttapercha wrote: > No - literally the webserver on the Pi to access the configuration. > cgi-bin/about.cgi is the landing page for the picoreplayer. It will not > load anymore after I make the first configuration change.. > > Thanks, > > Josh Sorry - I didn't answer the rest of your question. The ip address is dynamic but registered through gotdns guttapercha's Profile: http://forums.slimdevices.com/member.php?userid=67652 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] squeezelite constant crashing
rik...@gmx.net wrote: > > 6736 /usr/bin/squeezelite -n WohnV1osmc95RPI3 *-o default* > -V Speaker -a 0 *-m 00 00 00 00 00 95* -d all debug -f > /var/log/squeezelite.log please stop squeezelite and run /usr/bin/squeezelite -l try from bottom to top each of the listed device as parameter for -o lame is installed as well? why your using a mac from a xerox machine on your rpi??? DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108404 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce piCorePlayer 3.20
ralphy wrote: > Actually < 3.20 Greg Erskine wrote: > Just in case you haven't loaded this on the [Main] page. > > > Code: > > Install FFMpeg libraries for Squeezelite less> > This will download and install FFMpeg Libraries from the pCP repository. > Note: > Internet access is required. > The 7MB FFMpeg library adds playback of ALAC and WMA. > > Thanks for the replies. I reformatted a larger card (64GB as opposed to the 16GB. I didn't have anything smaller lying around.) and did a fresh install of 3.22. I changed the Audio to HMDI, and uploaded jivelite. Everything seems to be working fine right now! Fingers crossed! I don't know how any of that would make a difference. I did do the regular update for squeezelite extensions, I did not do the full update. I've done so many trial and errors, I am not sure if I installed the FFMpeg libraries. Where do I look to verify? I think that I am fine with my LMS server (Macmini) transcoding the ALAC files, and I do not have any WMA files so I might be better off not loading the FFMpeg library. One thing that Ididn't check yet is to see how it behaves when I synchronize with the Touch or Boom I also purchased a 3.0 5V supply, but I am not sure if that has made a difference. There may be a problem with the USB power connection because it seems quite delicate when I plug in the cable, the lightning bolt flashes momentarily when I move the screen. Thanks for keeping up with me, it is much appreciated! stereoptic's Profile: http://forums.slimdevices.com/member.php?userid=53162 View this thread: http://forums.slimdevices.com/showthread.php?t=107352 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > What do you mean by server? Your LMS server? Or Are you setting pCP > to a static up address? No - literally the webserver on the Pi to access the configuration. cgi-bin/about.cgi is the landing page for the picoreplayer. It will not load anymore after I make the first configuration change.. Thanks, Josh guttapercha's Profile: http://forums.slimdevices.com/member.php?userid=67652 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] squeezelite constant crashing
Hi of course will provide all the info required. Thanks for helping. it is a OSMC Leia with jessie based RPI 3 1 GB . But had same problem with Kodi 17. Having gpu_mem_1024=256 set. running: Squeezelite v1.8.6-957, Copyright 2012-2015 Adrian Smith, 2015-2017 Ralph Irving. See -t for license terms - there is also ser2net running - Spotitfy Connect Service / but disabled it for a while already - Have USB audio device attached card 0: Device [USB Audio Device], device 0: USB Audio [USB Audio] Subdevices: 0/1 Subdevice #0: subdevice #0 -> should I disable the bcm2835 ? Squeezelite is running as a service sudo service squeezelite status -l squeezelite.service - LSB: Lightweight headless Squeezebox emulator Loaded: loaded (/etc/init.d/squeezelite) Active: active (running) since Fr 2017-12-15 19:09:44 CET; 19h ago Process: 6719 ExecStop=/etc/init.d/squeezelite stop (code=exited, status=0/SUCCESS) Process: 6729 ExecStart=/etc/init.d/squeezelite start (code=exited, status=0/SUCCESS) CGroup: /system.slice/squeezelite.service 6736 /usr/bin/squeezelite -n WohnV1osmc95RPI3 -o default -V Speaker -a 0 -m 00 00 00 00 00 95 -d all debug -f /var/log/squeezelite.log Logfile entries which I do not understand are: [16:13:34.006277] slimproto_run:572 error reading from socket: closed [17:28:07.539247] slimproto_run:572 error reading from socket: closed [17:30:56.640772] slimproto_run:572 error reading from socket: closed [10:45:17.11] discover_server:821 error sending disovery [15:17:04.924515] discover_server:821 error sending disovery [03:57:49.988861] slimproto_run:572 error reading from socket: closed [10:18:14.731232] mad_decode:231 mad_frame_decode error: bad main_data_begin pointer No result for : dmesg -T | grep squeeze memory : $ free -m total used free sharedbuffers cached Mem: 747666 81 14 75 385 -/+ buffers/cache:205542 Swap:0 0 0 what else does help you? Thanks T rik...@gmx.net's Profile: http://forums.slimdevices.com/member.php?userid=66852 View this thread: http://forums.slimdevices.com/showthread.php?t=108404 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
What do you mean by server? Your LMS server? Or Are you setting pCP to a static up address? paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
