Re: [SlimDevices: Unix] Memory Leak in Perl Engine on piCorePlayer?

mvordeme wrote: > Doesn't it have to send something, or else the O/S wouldn't report the > connection as CLOSE_WAIT? I agree, hence I'm confused and need to take more logs LMS 7.9 on Pi 3B+ & Odroid-C2 - *SqueezeAMP!*, 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB3. Sonos PLAY:3, PLAY:5, Marantz

Re: [SlimDevices: Unix] Memory Leak in Perl Engine on piCorePlayer?

paul- wrote: > So it's in the Async HTTP. I see no difference in the logs whether it > is streaming direct vs streaming to a transcoder helper. I made a few > changes to the logging. > > 1. It's not tracking content received vs content length. Even though > Content-Length is present. > 2.

Re: [SlimDevices: Unix] Wireless access point on piCorePlayer?

While testing pCP7, I discovered there is a problem with the pi3B+ network adapter. It does not properly detect the carrier, and also will not come back up if you issue an ifconfig eth0 down command. One would think that it would not matter for AP mode, but since I'm really configuring pCP

Re: [SlimDevices: Unix] Memory Leak in Perl Engine on piCorePlayer?

So it's in the Async HTTP. I see no difference in the logs whether it is streaming direct vs streaming to a transcoder helper. I made a few changes to the logging. 1. It's not tracking content received vs content length. Even though Content-Length is present. 2. It's requesting to close the

Re: [SlimDevices: Unix] piCorePlayer 7.0.0 - Public Beta

That wouldn't matter to me, but I was under the impression you could not set both the WLAN and the eth0 to static. Since there is not eth0 cable hooked up, I also assumed it wouldn't look for an address. Thanks, Howard Greg Erskine wrote: > Setting eth0 to static IP will prevent it from

Re: [SlimDevices: Unix] piCorePlayer 7.0.0 - Public Beta

Setting eth0 to static IP will prevent it from trying to use DHCP. Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=113199

Re: [SlimDevices: Unix] piCorePlayer 7.0.0 - Public Beta

That does mean the WLAN IP, right? The WLAN is static. The eth0 is DHCP Howard Passman wrote: > Yup. And set the LMS server at 127.0.0.1 Howard Passman's Profile: http://forums.slimdevices.com/member.php?userid=16674

Re: [SlimDevices: Unix] piCorePlayer 7.0.0 - Public Beta

Yup. And set the LMS server at 127.0.0.1 Greg Erskine wrote: > Did you set a static IP, step 17? Howard Passman's Profile: http://forums.slimdevices.com/member.php?userid=16674 View this thread:

Re: [SlimDevices: Unix] piCorePlayer 7.0.0 - Public Beta

Did you set a static IP, step 17? Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=113199

Re: [SlimDevices: Unix] piCorePlayer 7.0.0 - Public Beta

Thanks Paul. Is there a script I can run before LMS loads that would put a date in there. It can be just some arbritary date. paul- wrote: > I'll have to think about that one. Lots break with streaming without a > valid date. Granted it doesn't affect you playing local music.

Re: [SlimDevices: Unix] piCorePlayer 7.0.0 - Public Beta

I'll have to think about that one. Lots break with streaming without a valid date. Granted it doesn't affect you playing local music. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate'

Re: [SlimDevices: Unix] piCorePlayer 7.0.0 - Public Beta

Thanks Greg, but not really. It's pretty much like that, except I do have AP set so I can access it and/or make changes from my phone. I've run a long DSI cable to a 7" screen and loaded Jivelite, so I can control it that way. I made something so the screen mounts on the dash. The server is

Re: [SlimDevices: Unix] piCorePlayer 7.0.0 - Public Beta

Does this help "'Standalone piCorePlayer' (https://docs.picoreplayer.org/projects/standalone-pcp/)"? Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread:

Re: [SlimDevices: Unix] Success piCorePlayer 7.0 0b6, Pi Zero WH, HifiBerry DAC2 Pro

b...@offsite.com wrote: > ...My original goal was to replace several Dell DAR players > -- > BHA Gosh! That takes me back! I still have my original Empeg Rio Receiver buried in a box in the attic. Did you ever try the replacement firmware which re-purposed them as (rather clunky)

Re: [SlimDevices: Unix] piCorePlayer 7.0.0 - Public Beta

I tested it by changing the network timeout to zero. It still took 30 seconds for LMS to start loading. "Waiting for valid date before starting LMS" I believe the network wait starts way before Start LMS startup in pcp_startup.sh. Can an edit be made there (LMS StartUp)? Howard Passman wrote:

Re: [SlimDevices: Unix] piCorePlayer 7.0.0 - Public Beta

Thanks. Since there is no network, it should be fine. Howard paul- wrote: > Change the network wait timeout. Its on the wifi page, but will change > the wait for any network connection. Howard Passman's Profile:

Re: [SlimDevices: Unix] piCorePlayer 7.0.0 - Public Beta

Change the network wait timeout. Its on the wifi page, but will change the wait for any network connection. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate'

Re: [SlimDevices: Unix] piCorePlayer 7.0.0 - Public Beta

My pCP is in the car and as such it does not have an Internet connection. LMS waits 30 seconds before it starts, waiting for the time to set. Is there a way I can shorten that time? Thanks RPI4 pCP 6.1 LMS 8 Howard

Re: [SlimDevices: Unix] piCorePlayer 6.x.x - Bluetooth

I have a Bose Soundlink Mini II BT speaker that I use in my kitchen. Normally it is paired with one of the RPiZeroW's that I have running half of my Living Room speaker systems. (Closest one) I also have it paired with my Family Room system and it will switch between connections when I move it

Re: [SlimDevices: Unix] Dual Wifi adapters

jeroen2 wrote: > Could it be a solution to setup a wifi hotspot on your phone, and have > the Pi connect to that when you're on the road? That could be a solution however I only want to connect to the Pi in order to change the local wifi connection. I do not desire to use the phone as the

Re: [SlimDevices: Unix] Memory Leak in Perl Engine on piCorePlayer?

paul- wrote: > Is there an external process involved? There doesnt appear to be > one. No - MPEG-4 AAC to ADTS AAC is done in Slim::Formats::Movie.pm ADTS-AAC is then fed into transcode chains (i.e. faad) via stdin. > The port in CLOSE_WAIT status is a local problem. How is the socket >

Re: [SlimDevices: Unix] Memory Leak in Perl Engine on piCorePlayer?

philippe_44 wrote: > > - Remember that streaming Tidal is not direct (in AAC), it is proxied > through LMS (I mode) as we need to re-wrap the MP4-AAC into ADTS frames > (this is a change I made last summer) > I don’t see this when playing Tidal to a squeezelite player.it goes directly.

Re: [SlimDevices: Unix] 'Official' docker container for LMS?

mherger wrote: > Ok, it's done: an "official" Docker image now is available on Docker > hub: > > https://hub.docker.com/r/lmscommunity/logitechmediaserver > > Just dropping in to say very very many thanks for this and I'll be running this when I next have a moment to pause my life.

Re: [SlimDevices: Unix] Memory Leak in Perl Engine on piCorePlayer?

philippe_44 wrote: > - When transcoding, the Tidal server does not send the close sequence > (at least I don't see it in wireshark) Doesn't it have to send something, or else the O/S wouldn't report the connection as CLOSE_WAIT? scaleo home server 2105 & picoreplayer 6.1.0 | logitech media