Hi, after having time and exchanging the Raspberry PI I found out that
the display is out of order. So I ordered a replacement (which was no
harrassment because it was ordered at Amazon), and now it works fully!
Sometimes things can get so easy. But because of my construction, It is
quite badly
skin if it is once saved ?
- Is there a proper way to upgrade without loosing config for example
from 8.1.1 to 8.2.0? It took a hell lot of time to do repeat all the
steps of manual configuraton, and as you can see, I am not already done.
...
Thanks for help appreciated!
Regards
peddanet
With one of my PicorePlayers I have a weird issue, which starts getting
nervy:
I have problems using the touch pad, I can not continuously use the
touch, it seems to work like a PWM, so 5 seconds fluent work, then stops
working for another 5 seconds (only as an example time!).
*Has anybody
kidstypike wrote:
> You only need to set the players name in the pCP web UI. Then on your
> joggler go to "Choose Player" and select that player.
>
> 38863
Ah, thanks!
Before my upgrade to v8.2.0, I had a weird issue. Sometimes my old
picoreplayer v8.1.1 was connecting and acting like a
Two side questions arose as weill:
- how to save the name of the picore player (instead of *picorePlayer
*it should be named like *picoreplayerBathroom *(I can set one name in
Jivelite and I guess one in the web interface and one somwhere else... I
forgot in config.txt?)? I got confused about
kidstypike wrote:
> Settings > Screen > Select Skin > Grid Skin?
Thanks kidstypike! I always get lost in the settings woods. For some
reason in the "grid skin" settings the "Joggler" skin was chosen here
(I remember clearly to have set up "800x480").
Now it has got the tiles look, but I do
e, so where is a step by step
installation guide for Joggler skin?? Joggler skin remains a little bit
foggy to me...)? These steps I did not document there. The tweaks
settings in the first screen of my post I have copied to my new image
(set koloss
Ok calibrating with ts_calibrate wasn't working quite well, but after a
time I managed to calibrate it with my fingers with enough precision,
but I can now surely say, every region works well with the touch except
the two first "thought" finger lines (so in terms of our menu, the first
row of
I have the following configuration:
Picores v8.2.0 on four devices : LivingRoom, Bedroom, Bathroom and
Kitchen
Squeezelite-X on Windows 10: Workspace room
*Version LMS*: Logitech Media Server Version: 8.3.0 - 1667251155 @ Fri
04 Nov 2022 09:17:53 AM CET
*Version Picores*: 8.2.0
peddanet wrote:
> I have the following configuration:
> I must add, that since update picores from 8.1.0 to 8.2.0 an LMS from
> 8.2.0 to 8.3.0 the behavior works like intended (three on /off cycles
> with all or just the plug controlled ones ...
It seems that the update of PiCor
peddanet wrote:
> I have the following configuration:
> I must add, that since update picores from 8.1.0 to 8.2.0 an LMS from
> 8.2.0 to 8.3.0 the behavior works like intended (three on /off cycles
> with all or just the plug controlled ones ...
It seems that the update of PiCor
I have this funny phenomenon, that sometimes after reboot, the
screensaver does not turn on after 30s to my "beloved" black digital
clock (black). Also switching to other "clocks" does not help them.
After a few days normally it suddenly works again (so after a few
restarts)
My 4 picore players
12 matches
Mail list logo
