Can you not turn hdmi/hdmi control off in the tv?
kit1cat's Profile: http://forums.slimdevices.com/member.php?userid=66141
View this thread: http://forums.slimdevices.com/showthread.php?t=112974
shunte88 wrote:
> bummer, was hoping that would finally join the dots
> OLED looks totally generic, sadly doesn't mention chip specifics but the
> python scripts only nuance was the GPIO specifics and the command line I
> gave should have nailed it
> I'll do a little more digging this end
Hi,
Clausi wrote:
> I had the same problems. I had a SSD in an USB enclosure and connected
> directly to my Raspberry Pi4 it was not possible to read my music files.
> At this time I was using max2play. Then I bought a USB hub and
> everything worked fine. The Raspberry obviously didn't supply
d6jg wrote:
> Thats not really a NAS then is it? Thats a Pi used as a storage device
Have a read of this article
https://thepi.io/how-to-use-your-raspberry-pi-as-a-nas-box/
kit1cat's Profile:
Partial Success :) Copied the font folder and the
oled_1.54_spi_audiophonics_py3.py file to /home/tc, ran the command
python3 lms_oled_1.54_spi_audiophonics_py3.py from puttty and I have a
display reading "Trying to connect player to LMS". My LMS server is on
another PI connected to a usb
Man in a van wrote:
> Select SCP
> Host name
> Port Number
> User Name
> Password
> Click on Advanced
> Click on SCP/Shell
> From the Default dropdown select sudo/su
> OK
>
> if you are going to open this a lot you can save the link
>
> piCoreplayer doesn't need this procedure (I think,
I have found WinSCP very useful for looking at the files on the SD card
, but when I try to copy or edit a file I keep getting error 3
Permission denied, works without a problem on my dietpi image. Any way
around this error?
When I booted my dietpi image, I found the display was working ok,
@Paul-Webster - WinSCP looks like just what I needed.
@shunte88 - WSL 2 looks a great way of learning a bit of Linux.
Thanks guys :)
kit1cat's Profile: http://forums.slimdevices.com/member.php?userid=66141
View this
Thanks for further info guys, will have a later.
Sorry gregex, I did not realise I needed other files to get your
solution up and running. I thought running your script would be enough,
like the script I ran for moOde. Unfortunately I am not a Linux user, I
can cut/paste commands and edit a
gregex wrote:
> reqs.pip won't survive a reboot unless you do a backup, but you only
> need that file if you are building the python dependencies.
>
> Sorry, I should have been clear -- run this to start the display:
>
> >
Code:
> >
> python3
gregex wrote:
> I got the Audiophonics python OLED script working with on pCP 6.1 with
> python3.6
> (A quick and dirty port of an old Audiophonics python script is
> attached.)
>
> Increase your filesystem size (500 MB is more than enough)
>
> Install the following extensions: compiletc.tcz,
gregex wrote:
> I got the Audiophonics python OLED script working with on pCP 6.1 with
> python3.6
> (A quick and dirty port of an old Audiophonics python script is
> attached.)
>
> Increase your filesystem size (500 MB is more than enough)
>
> Install the following extensions: compiletc.tcz,
Still not working for me, will try with a fresh install of picoreplayer
tomorrow. Thanks
kit1cat's Profile: http://forums.slimdevices.com/member.php?userid=66141
View this thread:
Sorry can't work out PM, file and photos attached.
+---+
|Filename: lms_oled_1.54_spi_audiophonics py.txt|
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=30623|
Sorry, just noticed your pm's, will try and get back to you today. I
will need to dismantle my player. Not sure if my reply to your pm was
sent?
Thanks
kit1cat's Profile:
Interesting looking Dac, wonder if they will do a case and/or a kit,
like the Raspdac mini?
kit1cat's Profile: http://forums.slimdevices.com/member.php?userid=66141
View this thread:
I have managed to get a remote to work. I have a Harmony 650 and read
that it supported the squeezebox touch remote. Installed picoreplayer's
default LIRC files, set GPIO pin to 4 and it's all up and running with
the Harmony.
shunte88 wrote:
> i2cdetect is showing your DAC
>
> The screen you have is an SPI device so any driver selection other than
> 1 or 7 won't work, the other selections are I2C which is a different
> communication protocol
>
> >
Code:
> > Supported OLED types:
> 1
anadigi wrote:
> Try my setting see that works for you:
>
> User Command #1: /mnt/mmcblk0p2/tce/gomonitor rn
> User Command #2: /mnt/mmcblk0p2/tce/lmsmonitor -n -ricxv -m vu -bdk -o 3
> -x 0x3c
Thanks, but still no display.
Still no luck.
Running /mnt/mmcblk0p2/tce/gomonitor vu,sa,pk,st -o 7 -x 0x3c -db gives
the following via Putty
tc@piCorePlayer:/mnt/mmcblk0p2/tce$ /mnt/mmcblk0p2/tce/gomonitor
vu,sa,pk,st -o
7 -x 0x3c -db
Floating point exception
Start LMSMonitor. Player: piCorePlayer
sudo
shunte88 wrote:
> New binary has been uploaded to git that exposes all of the arguments
> required for SPI support, additional parameters for I2C also exposed to
> round out the featureset.
>
> Defaults should be all that is necessary
>
> >
Code:
> > -x specifies
They don't actually give any details on SPI.
http://moodeaudio.org/forum/showthread.php?tid=664=10
Here's the latest working moode install script. (oled and ir)
Code:
sudo apt-get -y install python-smbus libjpeg-dev lirc
Code:
sudo pip install -U pip
sudo -i pip install --upgrade pip
OK, thanks for looking into it for me. The instructions I followed to
get it up and running in moode seemed to indicate it was SPI, but I am
no expert, I just follow the supplied instruction. I will keep my eye on
this thread. Thanks again.
linux-vdso.so.1 (0x7ee91000)
libpthread.so.0 => /lib/libpthread.so.0 (0x76f79000)
librt.so.1 => /lib/librt.so.1 (0x76f62000)
libi2c.so.0 => /usr/local/lib/libi2c.so.0 (0x76f5)
libstdc++.so.6 => /usr/lib/libstdc++.so.6 (0x76e03000)
libm.so.6 => /lib/libm.so.6 (0x76d96000)
libgcc_s.so.1 =>
shunte88 wrote:
> ldd lmsmonitor output?
./lmsmonitor: error while loading shared libraries: ./lmsmonitor: cannot
open shared object file: No such file or directory
kit1cat's Profile:
Running fresh install of picore 6 on pi pi 3B+, running LMS on seperate
pi 4.
./lmsmonitor: error while loading shared libraries: ./lmsmonitor: cannot
open shared object file: No such file or directory
1533 root 0:09 /mnt/mmcblk0p2/tce/lmsmonitor -n piCorePlayer
-ricxv -m VU SA PK ST -o 6
Hi, followed instructions on your GitHub page and installed on my
Raspdac mini running Picore player 6, entered
/mnt/mmcblk0p2/tce/gomonitor vu,sa,pk,st -o 6 -x 0x3c -db on picore
tweak page, rebooted and no display.
Have I missed something, is it compatible with my setup? Thanks
eristoff wrote:
> Hi,
>
> You need to edit the following files :
> > > >
- /etc/systemd/system/squeezelite.service : line 7, change
> squeezelite parameters, at least the mac address
- /home/dietpi/OLED/lms_oled_1.54_spi_audiophonics.py : line 71 with
> lms server details and
Thanks again ronnie, I going to have another look at the Audiophonics
Dietpi image, at least the remote and display work.
https://www.audiophonics.fr/en/blog-diy-audio/23-start-up-raspdac-rasptouch-raspdac-mini-with-a-pre-configured-image.html
Paul/ronnie thanks for suggestions guys, will have a look.
kit1cat's Profile: http://forums.slimdevices.com/member.php?userid=66141
View this thread: http://forums.slimdevices.com/showthread.php?t=112288
Man in a van wrote:
> I thought I saw on the MoOde forum you had it working.
>
> Why not use Squeezelite via MoOde ?
>
> ronnie
My Raspdac mini runs great under MoOde, but I have been trying out the
material skin for LMS and found it very good.
I have been using Squeezelite via MoOde on pi
Thanks for info. I have just tried Audiophonics Dietpi image, which
includes LMS and squeezelite. Display and remote working fine but I
don't have a clue how to run squeezelite or to connect to LMS on my
other pi. All a bit too much for my old brain.
Hi, any one managed to get the remote control and OLED screen working
with Picoreplayer/LMS? Thanks
kit1cat's Profile: http://forums.slimdevices.com/member.php?userid=66141
View this thread:
Hi, any one managed to get the Raspdac mini remote control and OLED
screen working with squeezelite in Picoreplayer? Thanks
https://www.audiophonics.fr/en/network-audio-players-raspdac/audiophonics-raspdac-mini-kit-diy-streamer-for-raspberry-pi-3-dac-es9038q2m-p-13300.html
Jeff07971 wrote:
> You are confusing partition table with formatting
>
> https://en.wikipedia.org/wiki/Partition_table
>
> https://en.wikipedia.org/wiki/Disk_partitioning
>
> https://en.wikipedia.org/wiki/Disk_formatting
Thanks for info, Never come across the partition table, had alway's
bolony wrote:
> Hi,unfortunately it doesn´t seem possible to do this,MBR can only have
> records up to 2 TB apparently,my partition assistant software suggests i
> convert disc to GPT to be able to use unallocated space :p
I am a bit confused why you need MBR/GPT partitions on a external drive,
bolony wrote:
> Thanks Paul.
>
> The hdd was formated when i brought it,must have come as GPT not MBR,
> I´ll reformat it and hopefully report back that all is solved :)
>
> Ah ,just saw MBR is only upto 2 TB,that´s why it comes formatted as GPT
> therefore,i assume.
>
> Edit :-
> Just
37 matches
Mail list logo